| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2013 Atmel Corporation |
| * Bo Shen <voice.shen@atmel.com> |
| */ |
| |
| #include <common.h> |
| #include <asm/io.h> |
| #include <asm/arch/at91_common.h> |
| #include <asm/arch/at91_wdt.h> |
| #include <asm/arch/clk.h> |
| #include <spl.h> |
| |
| #if !defined(CONFIG_WDT_AT91) |
| void at91_disable_wdt(void) |
| { |
| struct at91_wdt *wdt = (struct at91_wdt *)ATMEL_BASE_WDT; |
| |
| writel(AT91_WDT_MR_WDDIS, &wdt->mr); |
| } |
| #endif |
| |
| #if defined(CONFIG_SAMA5D2) || defined(CONFIG_SAMA5D3) || \ |
| defined(CONFIG_SAMA5D4) |
| #include <asm/arch/sama5_boot.h> |
| struct { |
| u32 r4; |
| } bootrom_stash __attribute__((section(".data"))); |
| |
| u32 spl_boot_device(void) |
| { |
| u32 dev = (bootrom_stash.r4 >> ATMEL_SAMA5_BOOT_FROM_OFF) & |
| ATMEL_SAMA5_BOOT_FROM_MASK; |
| u32 off = (bootrom_stash.r4 >> ATMEL_SAMA5_BOOT_DEV_ID_OFF) & |
| ATMEL_SAMA5_BOOT_DEV_ID_MASK; |
| |
| #if defined(CONFIG_SYS_USE_MMC) || defined(CONFIG_SD_BOOT) |
| if (dev == ATMEL_SAMA5_BOOT_FROM_MCI) { |
| #if defined(CONFIG_SPL_OF_CONTROL) |
| return BOOT_DEVICE_MMC1; |
| #else |
| if (off == 0) |
| return BOOT_DEVICE_MMC1; |
| if (off == 1) |
| return BOOT_DEVICE_MMC2; |
| printf("ERROR: MMC controller %i not present!\n", dev); |
| hang(); |
| #endif |
| } |
| #endif |
| |
| #if defined(CONFIG_SYS_USE_SERIALFLASH) || \ |
| defined(CONFIG_SYS_USE_SPIFLASH) || \ |
| defined(CONFIG_SPI_BOOT) |
| if (dev == ATMEL_SAMA5_BOOT_FROM_SPI) |
| return BOOT_DEVICE_SPI; |
| #endif |
| if (dev == ATMEL_SAMA5_BOOT_FROM_QSPI) |
| return BOOT_DEVICE_SPI; |
| |
| if (dev == ATMEL_SAMA5_BOOT_FROM_SMC) |
| return BOOT_DEVICE_NAND; |
| |
| if (dev == ATMEL_SAMA5_BOOT_FROM_SAMBA) |
| return BOOT_DEVICE_USB; |
| |
| printf("ERROR: SMC/TWI/QSPI boot device not supported!\n" |
| " Boot device %i, controller number %i\n", dev, off); |
| |
| return BOOT_DEVICE_NONE; |
| } |
| #else |
| u32 spl_boot_device(void) |
| { |
| #if defined(CONFIG_SYS_USE_MMC) || defined(CONFIG_SD_BOOT) |
| return BOOT_DEVICE_MMC1; |
| #elif defined(CONFIG_SYS_USE_NANDFLASH) || defined(CONFIG_NAND_BOOT) |
| return BOOT_DEVICE_NAND; |
| #elif defined(CONFIG_SYS_USE_SERIALFLASH) || \ |
| defined(CONFIG_SYS_USE_SPIFLASH) || \ |
| defined(CONFIG_SPI_BOOT) |
| return BOOT_DEVICE_SPI; |
| #endif |
| return BOOT_DEVICE_NONE; |
| } |
| #endif |