| /* |
| * Copyright (C) 2014 Freescale Semiconductor, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| /dts-v1/; |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| #include "imx6sx.dtsi" |
| |
| / { |
| model = "Freescale i.MX6 SoloX SDB Board"; |
| compatible = "fsl,imx6sx-sdb", "fsl,imx6sx"; |
| |
| chosen { |
| stdout-path = &uart1; |
| }; |
| |
| memory { |
| reg = <0x80000000 0x40000000>; |
| }; |
| |
| backlight1 { |
| compatible = "pwm-backlight"; |
| pwms = <&pwm3 0 5000000>; |
| brightness-levels = <0 4 8 16 32 64 128 255>; |
| default-brightness-level = <6>; |
| fb-names = "mxs-lcdif0"; |
| }; |
| backlight2 { |
| compatible = "pwm-backlight"; |
| pwms = <&pwm4 0 5000000>; |
| brightness-levels = <0 4 8 16 32 64 128 255>; |
| default-brightness-level = <6>; |
| fb-names = "mxs-lcdif1"; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpio_keys>; |
| |
| volume-up { |
| label = "Volume Up"; |
| gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_VOLUMEUP>; |
| }; |
| |
| volume-down { |
| label = "Volume Down"; |
| gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_VOLUMEDOWN>; |
| }; |
| }; |
| |
| hannstar_cabc { |
| compatible = "hannstar,cabc"; |
| lvds0 { |
| gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| pxp_v4l2_out { |
| compatible = "fsl,imx6sx-pxp-v4l2", "fsl,imx6sl-pxp-v4l2"; |
| status = "okay"; |
| }; |
| |
| regulators { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| vcc_sd3: regulator@0 { |
| compatible = "regulator-fixed"; |
| reg = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_vcc_sd3>; |
| regulator-name = "VCC_SD3"; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3000000>; |
| gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; |
| off-on-delay = <20000>; |
| enable-active-high; |
| }; |
| |
| reg_usb_otg1_vbus: regulator@1 { |
| compatible = "regulator-fixed"; |
| reg = <1>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usb_otg1>; |
| regulator-name = "usb_otg1_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_usb_otg2_vbus: regulator@2 { |
| compatible = "regulator-fixed"; |
| reg = <2>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usb_otg2>; |
| regulator-name = "usb_otg2_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_psu_5v: regulator@3 { |
| compatible = "regulator-fixed"; |
| reg = <3>; |
| regulator-name = "PSU-5V0"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| }; |
| |
| reg_lcd_3v3: regulator@4 { |
| compatible = "regulator-fixed"; |
| reg = <4>; |
| regulator-name = "lcd-3v3"; |
| gpio = <&gpio3 27 0>; |
| enable-active-high; |
| status = "disabled"; |
| }; |
| |
| reg_peri_3v3: regulator@5 { |
| compatible = "regulator-fixed"; |
| reg = <5>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_peri_3v3>; |
| regulator-name = "peri_3v3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| regulator-always-on; |
| }; |
| |
| reg_enet_3v3: regulator@6 { |
| compatible = "regulator-fixed"; |
| reg = <6>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet_3v3>; |
| regulator-name = "enet_3v3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; |
| }; |
| |
| reg_vref_3v3: regulator@7 { |
| compatible = "regulator-fixed"; |
| reg = <7>; |
| regulator-name = "vref-3v3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| reg_pcie: regulator@8 { |
| compatible = "regulator-fixed"; |
| reg = <8>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pcie_reg>; |
| regulator-name = "MPCIE_3V3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio2 1 0>; |
| regulator-always-on; |
| enable-active-high; |
| }; |
| |
| reg_can_en: regulator@9 { |
| compatible = "regulator-fixed"; |
| reg = <9>; |
| regulator-name = "can-en"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| reg_can_stby: regulator@10 { |
| compatible = "regulator-fixed"; |
| reg = <10>; |
| regulator-name = "can-stby"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| }; |
| |
| sound { |
| compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962"; |
| model = "wm8962-audio"; |
| cpu-dai = <&ssi2>; |
| audio-codec = <&codec>; |
| audio-routing = |
| "Headphone Jack", "HPOUTL", |
| "Headphone Jack", "HPOUTR", |
| "Ext Spk", "SPKOUTL", |
| "Ext Spk", "SPKOUTR", |
| "AMIC", "MICBIAS", |
| "IN3R", "AMIC"; |
| mux-int-port = <2>; |
| mux-ext-port = <6>; |
| codec-master; |
| hp-det-gpios = <&gpio1 17 1>; |
| }; |
| |
| sound-spdif { |
| compatible = "fsl,imx-audio-spdif", |
| "fsl,imx6sx-sdb-spdif"; |
| model = "imx-spdif"; |
| spdif-controller = <&spdif>; |
| spdif-out; |
| }; |
| |
| sii902x_reset: sii902x-reset { |
| compatible = "gpio-reset"; |
| reset-gpios = <&gpio3 27 1>; |
| reset-delay-us = <100000>; |
| #reset-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| &adc1 { |
| vref-supply = <®_vref_3v3>; |
| status = "okay"; |
| }; |
| |
| &adc2 { |
| vref-supply = <®_vref_3v3>; |
| status = "okay"; |
| }; |
| |
| &audmux { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_audmux>; |
| status = "okay"; |
| }; |
| |
| |
| &gpc { |
| fsl,ldo-bypass = <1>; |
| }; |
| |
| &fec1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet1>; |
| phy-supply = <®_enet_3v3>; |
| phy-mode = "rgmii"; |
| phy-handle = <ðphy1>; |
| status = "okay"; |
| |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ethphy1: ethernet-phy@1 { |
| reg = <1>; |
| }; |
| |
| ethphy2: ethernet-phy@2 { |
| reg = <2>; |
| }; |
| }; |
| }; |
| |
| &csi1 { |
| status = "okay"; |
| |
| port { |
| csi1_ep: endpoint { |
| remote-endpoint = <&ov5640_ep>; |
| }; |
| }; |
| }; |
| |
| &csi2 { |
| status = "okay"; |
| port { |
| csi2_ep: endpoint { |
| remote-endpoint = <&vadc_ep>; |
| }; |
| }; |
| }; |
| |
| &dcic1 { |
| dcic_id = <0>; |
| dcic_mux = "dcic-lcdif1"; |
| status = "okay"; |
| }; |
| |
| &dcic2 { |
| dcic_id = <1>; |
| dcic_mux = "dcic-lvds"; |
| status = "okay"; |
| }; |
| |
| &fec2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet2>; |
| phy-mode = "rgmii"; |
| phy-handle = <ðphy2>; |
| status = "okay"; |
| }; |
| |
| &flexcan1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan1>; |
| xceiver-supply = <®_can_stby>; |
| status = "okay"; |
| }; |
| |
| &flexcan2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan2>; |
| xceiver-supply = <®_can_stby>; |
| status = "okay"; |
| }; |
| |
| &i2c1 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default", "gpio"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| pinctrl-1 = <&pinctrl_i2c1_gpio>; |
| scl-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; |
| sda-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; |
| status = "okay"; |
| |
| pmic: pfuze100@08 { |
| compatible = "fsl,pfuze200"; |
| reg = <0x08>; |
| |
| regulators { |
| sw1a_reg: sw1ab { |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <1875000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <6250>; |
| }; |
| |
| sw2_reg: sw2 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw3a_reg: sw3a { |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <1975000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw3b_reg: sw3b { |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <1975000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| swbst_reg: swbst { |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5150000>; |
| }; |
| |
| snvs_reg: vsnvs { |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <3000000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vref_reg: vrefddr { |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vgen1_reg: vgen1 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1550000>; |
| regulator-always-on; |
| }; |
| |
| vgen2_reg: vgen2 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1550000>; |
| }; |
| |
| vgen3_reg: vgen3 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vgen4_reg: vgen4 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vgen5_reg: vgen5 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vgen6_reg: vgen6 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| }; |
| }; |
| |
| ov5640: ov5640@3c { |
| compatible = "ovti,ov5640"; |
| reg = <0x3c>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_csi_0>; |
| clocks = <&clks IMX6SX_CLK_CSI>; |
| clock-names = "csi_mclk"; |
| AVDD-supply = <&vgen3_reg>; /* 2.8v */ |
| DVDD-supply = <&vgen2_reg>; /* 1.5v*/ |
| pwn-gpios = <&gpio3 28 1>; |
| rst-gpios = <&gpio3 27 0>; |
| csi_id = <0>; |
| mclk = <24000000>; |
| mclk_source = <0>; |
| port { |
| ov5640_ep: endpoint { |
| remote-endpoint = <&csi1_ep>; |
| }; |
| }; |
| }; |
| |
| sii902x@39 { |
| compatible = "SiI,sii902x"; |
| interrupt-parent = <&gpio4>; |
| interrupts = <21 2>; |
| mode_str ="1280x720M@60"; |
| bits-per-pixel = <16>; |
| resets = <&sii902x_reset>; |
| reg = <0x39>; |
| status = "disabled"; |
| }; |
| }; |
| |
| &i2c2 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default", "gpio"; |
| pinctrl-0 = <&pinctrl_i2c2>; |
| pinctrl-1 = <&pinctrl_i2c2_gpio>; |
| scl-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; |
| sda-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; |
| status = "okay"; |
| |
| egalax_ts@04 { |
| compatible = "eeti,egalax_ts"; |
| reg = <0x04>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_egalax_int>; |
| interrupt-parent = <&gpio4>; |
| interrupts = <19 2>; |
| wakeup-gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| &i2c3 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default", "gpio"; |
| pinctrl-0 = <&pinctrl_i2c3>; |
| pinctrl-1 = <&pinctrl_i2c3_gpio>; |
| scl-gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>; |
| sda-gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>; |
| status = "okay"; |
| |
| isl29023@44 { |
| compatible = "fsl,isl29023"; |
| reg = <0x44>; |
| rext = <499>; |
| interrupt-parent = <&gpio6>; |
| interrupts = <5 1>; |
| shared-interrupt; |
| }; |
| |
| mag3110@0e { |
| compatible = "fsl,mag3110"; |
| reg = <0x0e>; |
| position = <2>; |
| interrupt-parent = <&gpio6>; |
| interrupts = <5 1>; |
| shared-interrupt; |
| }; |
| |
| mma8451@1c { |
| compatible = "fsl,mma8451"; |
| reg = <0x1c>; |
| position = <1>; |
| interrupt-parent = <&gpio6>; |
| interrupts = <2 8>; |
| interrupt-route = <2>; |
| }; |
| }; |
| |
| &i2c4 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default", "gpio"; |
| pinctrl-0 = <&pinctrl_i2c4>; |
| pinctrl-1 = <&pinctrl_i2c4_gpio>; |
| scl-gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; |
| sda-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; |
| status = "okay"; |
| |
| codec: wm8962@1a { |
| compatible = "wlf,wm8962"; |
| reg = <0x1a>; |
| clocks = <&clks IMX6SX_CLK_AUDIO>; |
| DCVDD-supply = <&vgen4_reg>; |
| DBVDD-supply = <&vgen4_reg>; |
| AVDD-supply = <&vgen4_reg>; |
| CPVDD-supply = <&vgen4_reg>; |
| MICVDD-supply = <&vgen3_reg>; |
| PLLVDD-supply = <&vgen4_reg>; |
| SPKVDD1-supply = <®_psu_5v>; |
| SPKVDD2-supply = <®_psu_5v>; |
| amic-mono; |
| }; |
| }; |
| |
| &lcdif1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lcd>; |
| lcd-supply = <®_lcd_3v3>; |
| display = <&display0>; |
| status = "disabled"; |
| |
| display0: display@0 { |
| bits-per-pixel = <16>; |
| bus-width = <24>; |
| |
| display-timings { |
| native-mode = <&timing0>; |
| timing0: timing0 { |
| clock-frequency = <33500000>; |
| hactive = <800>; |
| vactive = <480>; |
| hback-porch = <89>; |
| hfront-porch = <164>; |
| vback-porch = <23>; |
| vfront-porch = <10>; |
| hsync-len = <10>; |
| vsync-len = <10>; |
| hsync-active = <0>; |
| vsync-active = <0>; |
| de-active = <1>; |
| pixelclk-active = <0>; |
| }; |
| }; |
| }; |
| }; |
| |
| &pcie { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pcie>; |
| reset-gpio = <&gpio2 0 0>; |
| status = "okay"; |
| }; |
| |
| &lcdif2 { |
| display = <&display1>; |
| disp-dev = "ldb"; |
| status = "okay"; |
| display1: display@1 { |
| bits-per-pixel = <16>; |
| bus-width = <18>; |
| }; |
| }; |
| &ldb { |
| status = "okay"; |
| lvds-channel@0 { |
| fsl,data-mapping = "spwg"; |
| fsl,data-width = <18>; |
| crtc = "lcdif2"; |
| status = "okay"; |
| display-timings { |
| native-mode = <&timing1>; |
| timing1: hsd100pxn1 { |
| clock-frequency = <65000000>; |
| hactive = <1024>; |
| vactive = <768>; |
| hback-porch = <220>; |
| hfront-porch = <40>; |
| vback-porch = <21>; |
| vfront-porch = <7>; |
| hsync-len = <60>; |
| vsync-len = <10>; |
| }; |
| }; |
| }; |
| }; |
| |
| &pwm3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm3>; |
| status = "okay"; |
| }; |
| |
| &pwm4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm4>; |
| status = "okay"; |
| }; |
| |
| &pxp { |
| status = "okay"; |
| }; |
| |
| &snvs_poweroff { |
| status = "okay"; |
| }; |
| |
| &sai1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sai1>; |
| status = "disabled"; |
| }; |
| |
| &spdif { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_spdif>; |
| status = "okay"; |
| }; |
| |
| &ssi2 { |
| assigned-clocks = <&clks IMX6SX_CLK_PLL4>, |
| <&clks IMX6SX_PLL4_BYPASS>, |
| <&clks IMX6SX_CLK_SSI2_SEL>; |
| assigned-clock-parents = <&clks IMX6SX_CLK_OSC>, |
| <&clks IMX6SX_CLK_PLL4>, |
| <&clks IMX6SX_CLK_PLL4_AUDIO_DIV>; |
| assigned-clock-rates = <737280000>, <0>, <0>; |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| status = "okay"; |
| }; |
| |
| &uart5 { /* for bluetooth */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart5>; |
| uart-has-rtscts; |
| status = "okay"; |
| /* for DTE mode, add below change */ |
| /* fsl,dte-mode;*/ |
| /* pinctrl-0 = <&pinctrl_uart5dte_1>; */ |
| }; |
| |
| &usbotg1 { |
| vbus-supply = <®_usb_otg1_vbus>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usb_otg1_id>; |
| srp-disable; |
| hnp-disable; |
| adp-disable; |
| status = "okay"; |
| }; |
| |
| &usbotg2 { |
| vbus-supply = <®_usb_otg2_vbus>; |
| dr_mode = "host"; |
| status = "okay"; |
| }; |
| |
| &usbphy1 { |
| fsl,tx-d-cal = <106>; |
| }; |
| |
| &usbphy2 { |
| fsl,tx-d-cal = <106>; |
| }; |
| |
| &usdhc2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc2>; |
| non-removable; |
| no-1-8-v; |
| keep-power-in-suspend; |
| wakeup-source; |
| status = "okay"; |
| }; |
| |
| &usdhc3 { |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc3>; |
| pinctrl-1 = <&pinctrl_usdhc3_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc3_200mhz>; |
| bus-width = <8>; |
| cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; |
| wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; |
| keep-power-in-suspend; |
| wakeup-source; |
| vmmc-supply = <&vcc_sd3>; |
| status = "okay"; |
| }; |
| |
| &usdhc4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc4>; |
| cd-gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; |
| wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>; |
| status = "okay"; |
| }; |
| |
| &wdog1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_wdog>; |
| fsl,ext-reset-output; |
| }; |
| |
| &iomuxc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hog &pinctrl_can_gpios>; |
| |
| imx6x-sdb { |
| pinctrl_hog: hoggrp { |
| fsl,pins = < |
| MX6SX_PAD_SD1_DATA0__GPIO6_IO_2 0x17059 |
| MX6SX_PAD_SD1_DATA3__GPIO6_IO_5 0xb000 |
| MX6SX_PAD_CSI_DATA03__GPIO1_IO_17 0x17059 |
| >; |
| }; |
| |
| pinctrl_can_gpios: can-gpios { |
| fsl,pins = < |
| MX6SX_PAD_QSPI1B_DATA1__GPIO4_IO_25 0x17059 |
| MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27 0x17059 |
| >; |
| }; |
| |
| pinctrl_audmux: audmuxgrp { |
| fsl,pins = < |
| MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC 0x130b0 |
| MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS 0x130b0 |
| MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD 0x120b0 |
| MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD 0x130b0 |
| MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x130b0 |
| >; |
| }; |
| |
| pinctrl_csi_0: csigrp-0 { |
| fsl,pins = < |
| MX6SX_PAD_LCD1_DATA07__CSI1_MCLK 0x110b0 |
| MX6SX_PAD_LCD1_DATA06__CSI1_PIXCLK 0x110b0 |
| MX6SX_PAD_LCD1_DATA04__CSI1_VSYNC 0x110b0 |
| MX6SX_PAD_LCD1_DATA05__CSI1_HSYNC 0x110b0 |
| MX6SX_PAD_LCD1_DATA17__CSI1_DATA_0 0x110b0 |
| MX6SX_PAD_LCD1_DATA16__CSI1_DATA_1 0x110b0 |
| MX6SX_PAD_LCD1_DATA15__CSI1_DATA_2 0x110b0 |
| MX6SX_PAD_LCD1_DATA14__CSI1_DATA_3 0x110b0 |
| MX6SX_PAD_LCD1_DATA13__CSI1_DATA_4 0x110b0 |
| MX6SX_PAD_LCD1_DATA12__CSI1_DATA_5 0x110b0 |
| MX6SX_PAD_LCD1_DATA11__CSI1_DATA_6 0x110b0 |
| MX6SX_PAD_LCD1_DATA10__CSI1_DATA_7 0x110b0 |
| MX6SX_PAD_LCD1_DATA09__CSI1_DATA_8 0x110b0 |
| MX6SX_PAD_LCD1_DATA08__CSI1_DATA_9 0x110b0 |
| MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x80000000 |
| MX6SX_PAD_LCD1_VSYNC__GPIO3_IO_28 0x80000000 |
| >; |
| }; |
| |
| pinctrl_egalax_int: egalax_intgrp { |
| fsl,pins = < |
| MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19 0x80000000 |
| >; |
| }; |
| |
| pinctrl_enet1: enet1grp { |
| fsl,pins = < |
| MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1 |
| MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1 |
| MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0xa0b9 |
| MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1 |
| MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1 |
| MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0xa0b1 |
| MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0xa0b1 |
| MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1 |
| MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081 |
| MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081 |
| MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081 |
| MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081 |
| MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081 |
| MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081 |
| MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91 |
| >; |
| }; |
| |
| pinctrl_enet_3v3: enet3v3grp { |
| fsl,pins = < |
| MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0x80000000 |
| >; |
| }; |
| |
| pinctrl_enet2: enet2grp { |
| fsl,pins = < |
| MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0xa0b9 |
| MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0xa0b1 |
| MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0xa0b1 |
| MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0xa0b1 |
| MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0xa0b1 |
| MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0xa0b1 |
| MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081 |
| MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081 |
| MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081 |
| MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081 |
| MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081 |
| MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081 |
| >; |
| }; |
| |
| pinctrl_flexcan1: flexcan1grp { |
| fsl,pins = < |
| MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x1b020 |
| MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX 0x1b020 |
| >; |
| }; |
| |
| pinctrl_flexcan2: flexcan2grp { |
| fsl,pins = < |
| MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b020 |
| MX6SX_PAD_QSPI1A_DQS__CAN2_TX 0x1b020 |
| >; |
| }; |
| |
| pinctrl_gpio_keys: gpio_keysgrp { |
| fsl,pins = < |
| MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059 |
| MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x17059 |
| >; |
| }; |
| |
| pinctrl_i2c1: i2c1grp { |
| fsl,pins = < |
| MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1 |
| MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c1_gpio: i2c1grp-gpio { |
| fsl,pins = < |
| MX6SX_PAD_GPIO1_IO01__GPIO1_IO_1 0x1b8b1 |
| MX6SX_PAD_GPIO1_IO00__GPIO1_IO_0 0x1b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c2: i2c2grp { |
| fsl,pins = < |
| MX6SX_PAD_GPIO1_IO03__I2C2_SDA 0x4001b8b1 |
| MX6SX_PAD_GPIO1_IO02__I2C2_SCL 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c2_gpio: i2c2grp-gpio { |
| fsl,pins = < |
| MX6SX_PAD_GPIO1_IO03__GPIO1_IO_3 0x1b8b1 |
| MX6SX_PAD_GPIO1_IO02__GPIO1_IO_2 0x1b8b1 |
| >; |
| }; |
| pinctrl_i2c3: i2c3grp { |
| fsl,pins = < |
| MX6SX_PAD_KEY_ROW4__I2C3_SDA 0x4001b8b1 |
| MX6SX_PAD_KEY_COL4__I2C3_SCL 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c3_gpio: i2c3grp-gpio { |
| fsl,pins = < |
| MX6SX_PAD_KEY_ROW4__GPIO2_IO_19 0x1b8b1 |
| MX6SX_PAD_KEY_COL4__GPIO2_IO_14 0x1b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c4: i2c4grp { |
| fsl,pins = < |
| MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x4001b8b1 |
| MX6SX_PAD_CSI_DATA06__I2C4_SCL 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c4_gpio: i2c4grp-gpio { |
| fsl,pins = < |
| MX6SX_PAD_CSI_DATA07__GPIO1_IO_21 0x1b8b1 |
| MX6SX_PAD_CSI_DATA06__GPIO1_IO_20 0x1b8b1 |
| >; |
| }; |
| |
| pinctrl_lcd: lcdgrp { |
| fsl,pins = < |
| MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0 |
| MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0 |
| MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0 |
| MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0 |
| MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0 |
| MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0 |
| >; |
| }; |
| |
| pinctrl_mqs: mqsgrp { |
| fsl,pins = < |
| MX6SX_PAD_SD2_CLK__MQS_RIGHT 0x120b0 |
| MX6SX_PAD_SD2_CMD__MQS_LEFT 0x120b0 |
| >; |
| }; |
| |
| pinctrl_pcie: pciegrp { |
| fsl,pins = < |
| MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x10b0 |
| >; |
| }; |
| |
| pinctrl_pcie_reg: pciereggrp { |
| fsl,pins = < |
| MX6SX_PAD_ENET1_CRS__GPIO2_IO_1 0x10b0 |
| >; |
| }; |
| |
| pinctrl_peri_3v3: peri3v3grp { |
| fsl,pins = < |
| MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x80000000 |
| >; |
| }; |
| |
| pinctrl_pwm3: pwm3grp-1 { |
| fsl,pins = < |
| MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0 |
| >; |
| }; |
| |
| pinctrl_pwm4: pwm4grp-1 { |
| fsl,pins = < |
| MX6SX_PAD_SD1_DATA1__PWM4_OUT 0x110b0 |
| >; |
| }; |
| |
| pinctrl_qspi2: qspi2grp { |
| fsl,pins = < |
| MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0 0x70f1 |
| MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1 0x70f1 |
| MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2 0x70f1 |
| MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3 0x70f1 |
| MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK 0x70f1 |
| MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B 0x70f1 |
| MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0 0x70f1 |
| MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1 0x70f1 |
| MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2 0x70f1 |
| MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3 0x70f1 |
| MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK 0x70f1 |
| MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B 0x70f1 |
| >; |
| }; |
| |
| pinctrl_spdif: spdifgrp { |
| fsl,pins = < |
| MX6SX_PAD_SD4_DATA4__SPDIF_OUT 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_vcc_sd3: vccsd3grp { |
| fsl,pins = < |
| MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059 |
| >; |
| }; |
| |
| pinctrl_sai1: sai1grp { |
| fsl,pins = < |
| MX6SX_PAD_CSI_DATA00__SAI1_TX_BCLK 0x130b0 |
| MX6SX_PAD_CSI_DATA01__SAI1_TX_SYNC 0x130b0 |
| MX6SX_PAD_CSI_HSYNC__SAI1_TX_DATA_0 0x120b0 |
| MX6SX_PAD_CSI_VSYNC__SAI1_RX_DATA_0 0x130b0 |
| MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x130b0 |
| >; |
| }; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1 |
| MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_uart5: uart5grp { |
| fsl,pins = < |
| MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1 |
| MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1 |
| MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x1b0b1 |
| MX6SX_PAD_KEY_COL2__UART5_RTS_B 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_uart5dte_1: uart5dtegrp-1 { |
| fsl,pins = < |
| MX6SX_PAD_KEY_ROW3__UART5_TX 0x1b0b1 |
| MX6SX_PAD_KEY_COL3__UART5_RX 0x1b0b1 |
| MX6SX_PAD_KEY_ROW2__UART5_RTS_B 0x1b0b1 |
| MX6SX_PAD_KEY_COL2__UART5_CTS_B 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_usb_otg1: usbotg1grp { |
| fsl,pins = < |
| MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0 |
| >; |
| }; |
| |
| pinctrl_usb_otg1_id: usbotg1idgrp { |
| fsl,pins = < |
| MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059 |
| >; |
| }; |
| |
| pinctrl_usb_otg2: usbot2ggrp { |
| fsl,pins = < |
| MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12 0x10b0 |
| >; |
| }; |
| |
| pinctrl_usdhc2: usdhc2grp { |
| fsl,pins = < |
| MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059 |
| MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059 |
| MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059 |
| MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059 |
| MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059 |
| MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059 |
| >; |
| }; |
| |
| pinctrl_usdhc3: usdhc3grp { |
| fsl,pins = < |
| MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17069 |
| MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10071 |
| MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17069 |
| MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17069 |
| MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17069 |
| MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17069 |
| MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x17069 |
| MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x17069 |
| MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x17069 |
| MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x17069 |
| MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x17059 /* CD */ |
| MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 /* WP */ |
| >; |
| }; |
| |
| pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { |
| fsl,pins = < |
| MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9 |
| MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9 |
| MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170b9 |
| MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170b9 |
| MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170b9 |
| MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170b9 |
| MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170b9 |
| MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170b9 |
| MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170b9 |
| MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170b9 |
| >; |
| }; |
| |
| pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { |
| fsl,pins = < |
| MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9 |
| MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9 |
| MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170f9 |
| MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170f9 |
| MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170f9 |
| MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170f9 |
| MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170f9 |
| MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170f9 |
| MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170f9 |
| MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170f9 |
| >; |
| }; |
| |
| pinctrl_usdhc4: usdhc4grp { |
| fsl,pins = < |
| MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059 |
| MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059 |
| MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059 |
| MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059 |
| MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059 |
| MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059 |
| MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x17059 /* CD */ |
| MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */ |
| >; |
| }; |
| |
| pinctrl_usdhc4_1: usdhc4grp-1 { |
| fsl,pins = < |
| MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059 |
| MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059 |
| MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059 |
| MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059 |
| MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059 |
| MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059 |
| MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x17059 |
| MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x17059 |
| MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x17059 |
| MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x17059 |
| >; |
| }; |
| |
| pinctrl_usdhc4_1_100mhz: usdhc4grp-1-100mhz { |
| fsl,pins = < |
| MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170b9 |
| MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100b9 |
| MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x170b9 |
| MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x170b9 |
| MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x170b9 |
| MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x170b9 |
| MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x170b9 |
| MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x170b9 |
| MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x170b9 |
| MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x170b9 |
| >; |
| }; |
| |
| pinctrl_usdhc4_1_200mhz: usdhc4grp-1-200mhz { |
| fsl,pins = < |
| MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170f9 |
| MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100f9 |
| MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x170f9 |
| MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x170f9 |
| MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x170f9 |
| MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x170f9 |
| MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x170f9 |
| MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x170f9 |
| MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x170f9 |
| MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x170f9 |
| >; |
| }; |
| |
| pinctrl_wdog: wdoggrp { |
| fsl,pins = < |
| MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY 0x30b0 |
| >; |
| }; |
| }; |
| }; |
| |
| &vadc { |
| vadc_in = <0>; |
| csi_id = <1>; |
| status = "okay"; |
| port { |
| vadc_ep: endpoint { |
| remote-endpoint = <&csi2_ep>; |
| }; |
| }; |
| }; |
