| /* |
| * Copyright (C) 2011 Ilya Yanok, Emcraft Systems |
| * |
| * Based on omap3_evm_config.h |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| /* |
| * High Level Configuration Options |
| */ |
| #define CONFIG_OMAP /* in a TI OMAP core */ |
| #define CONFIG_OMAP3_MCX /* working with mcx */ |
| #define CONFIG_OMAP_GPIO |
| #define CONFIG_OMAP_COMMON |
| /* Common ARM Erratas */ |
| #define CONFIG_ARM_ERRATA_454179 |
| #define CONFIG_ARM_ERRATA_430973 |
| #define CONFIG_ARM_ERRATA_621766 |
| |
| #define MACH_TYPE_MCX 3656 |
| #define CONFIG_MACH_TYPE MACH_TYPE_MCX |
| #define CONFIG_BOARD_LATE_INIT |
| |
| |
| #define CONFIG_SYS_CACHELINE_SIZE 64 |
| |
| #define CONFIG_EMIF4 /* The chip has EMIF4 controller */ |
| |
| #include <asm/arch/cpu.h> /* get chip and board defs */ |
| #include <asm/arch/omap.h> |
| |
| /* |
| * Leave it at 0x80008000 to allow booting new u-boot.bin with X-loader |
| * and older u-boot.bin with the new U-Boot SPL. |
| */ |
| #define CONFIG_SYS_TEXT_BASE 0x80008000 |
| |
| /* |
| * Display CPU and Board information |
| */ |
| #define CONFIG_DISPLAY_CPUINFO |
| #define CONFIG_DISPLAY_BOARDINFO |
| |
| /* Clock Defines */ |
| #define V_OSCK 26000000 /* Clock output from T2 */ |
| #define V_SCLK (V_OSCK >> 1) |
| |
| #define CONFIG_MISC_INIT_R |
| |
| #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ |
| #define CONFIG_SETUP_MEMORY_TAGS |
| #define CONFIG_INITRD_TAG |
| #define CONFIG_REVISION_TAG |
| |
| /* |
| * Size of malloc() pool |
| */ |
| #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB sector */ |
| #define CONFIG_SYS_MALLOC_LEN (1024 << 10) |
| /* |
| * DDR related |
| */ |
| #define CONFIG_SYS_CS0_SIZE (256 * 1024 * 1024) |
| |
| /* |
| * Hardware drivers |
| */ |
| |
| /* |
| * NS16550 Configuration |
| */ |
| #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ |
| |
| #define CONFIG_SYS_NS16550_SERIAL |
| #define CONFIG_SYS_NS16550_REG_SIZE (-4) |
| #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK |
| |
| /* |
| * select serial console configuration |
| */ |
| #define CONFIG_CONS_INDEX 3 |
| #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 |
| #define CONFIG_SERIAL3 3 /* UART3 */ |
| |
| /* allow to overwrite serial and ethaddr */ |
| #define CONFIG_ENV_OVERWRITE |
| #define CONFIG_BAUDRATE 115200 |
| #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ |
| 115200} |
| #define CONFIG_MMC |
| #define CONFIG_OMAP_HSMMC |
| #define CONFIG_GENERIC_MMC |
| #define CONFIG_DOS_PARTITION |
| |
| /* EHCI */ |
| #define CONFIG_USB_STORAGE |
| #define CONFIG_OMAP3_GPIO_2 |
| #define CONFIG_OMAP3_GPIO_5 |
| #define CONFIG_USB_EHCI |
| #define CONFIG_USB_EHCI_OMAP |
| #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 57 |
| #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 |
| #define CONFIG_USB_HOST_ETHER |
| #define CONFIG_USB_ETHER_ASIX |
| #define CONFIG_USB_ETHER_MCS7830 |
| |
| /* commands to include */ |
| #define CONFIG_CMD_EXT2 /* EXT2 Support */ |
| #define CONFIG_CMD_FAT /* FAT support */ |
| #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ |
| |
| #define CONFIG_CMD_DATE |
| #define CONFIG_CMD_MMC /* MMC support */ |
| #define CONFIG_CMD_FAT /* FAT support */ |
| #define CONFIG_CMD_NAND /* NAND support */ |
| #define CONFIG_CMD_CACHE |
| #define CONFIG_CMD_UBI |
| #define CONFIG_CMD_UBIFS |
| #define CONFIG_RBTREE |
| #define CONFIG_LZO |
| #define CONFIG_MTD_PARTITIONS |
| #define CONFIG_MTD_DEVICE |
| #define CONFIG_CMD_MTDPARTS |
| |
| #define CONFIG_SYS_NO_FLASH |
| #define CONFIG_SYS_I2C |
| #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 |
| #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 |
| #define CONFIG_SYS_I2C_OMAP34XX |
| |
| /* RTC */ |
| #define CONFIG_RTC_DS1337 |
| #define CONFIG_SYS_I2C_RTC_ADDR 0x68 |
| |
| #define CONFIG_CMD_MII |
| /* |
| * Board NAND Info. |
| */ |
| #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ |
| /* to access nand */ |
| #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ |
| /* to access */ |
| /* nand at CS0 */ |
| |
| #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ |
| /* NAND devices */ |
| #define CONFIG_JFFS2_NAND |
| /* nand device jffs2 lives on */ |
| #define CONFIG_JFFS2_DEV "nand0" |
| /* start of jffs2 partition */ |
| #define CONFIG_JFFS2_PART_OFFSET 0x680000 |
| #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* sz of jffs2 part */ |
| |
| /* Environment information */ |
| #define CONFIG_BOOTDELAY 3 |
| |
| #define CONFIG_BOOTFILE "uImage" |
| |
| /* Setup MTD for NAND on the SOM */ |
| #define MTDIDS_DEFAULT "nand0=omap2-nand.0" |
| #define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:512k(MLO)," \ |
| "1m(u-boot),256k(env1)," \ |
| "256k(env2),6m(kernel),6m(k_recovery)," \ |
| "8m(fs_recovery),-(common_data)" |
| |
| #define CONFIG_HOSTNAME mcx |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "adddbg=setenv bootargs ${bootargs} trace_buf_size=64M\0" \ |
| "adddebug=setenv bootargs ${bootargs} earlyprintk=serial\0" \ |
| "addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0" \ |
| "addfb=setenv bootargs ${bootargs} vram=6M " \ |
| "omapfb.vram=1:2M,2:2M,3:2M omapdss.def_disp=lcd\0" \ |
| "addip_sta=setenv bootargs ${bootargs} " \ |
| "ip=${ipaddr}:${serverip}:${gatewayip}:" \ |
| "${netmask}:${hostname}:eth0:off\0" \ |
| "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \ |
| "addip=if test -n ${ipdyn};then run addip_dyn;" \ |
| "else run addip_sta;fi\0" \ |
| "addmisc=setenv bootargs ${bootargs} ${misc}\0" \ |
| "addtty=setenv bootargs ${bootargs} " \ |
| "console=${consoledev},${baudrate}\0" \ |
| "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ |
| "baudrate=115200\0" \ |
| "consoledev=ttyO2\0" \ |
| "hostname=" __stringify(CONFIG_HOSTNAME) "\0" \ |
| "loadaddr=0x82000000\0" \ |
| "load=tftp ${loadaddr} ${u-boot}\0" \ |
| "load_k=tftp ${loadaddr} ${bootfile}\0" \ |
| "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ |
| "loadmlo=tftp ${loadaddr} ${mlo}\0" \ |
| "mlo=" __stringify(CONFIG_HOSTNAME) "/MLO\0" \ |
| "mmcargs=root=/dev/mmcblk0p2 rw " \ |
| "rootfstype=ext3 rootwait\0" \ |
| "mmcboot=echo Booting from mmc ...; " \ |
| "run mmcargs; " \ |
| "run addip addtty addmtd addfb addeth addmisc;" \ |
| "run loaduimage; " \ |
| "bootm ${loadaddr}\0" \ |
| "net_nfs=run load_k; " \ |
| "run nfsargs; " \ |
| "run addip addtty addmtd addfb addeth addmisc;" \ |
| "bootm ${loadaddr}\0" \ |
| "nfsargs=setenv bootargs root=/dev/nfs rw " \ |
| "nfsroot=${serverip}:${rootpath}\0" \ |
| "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.img\0" \ |
| "uboot_addr=0x80000\0" \ |
| "update=nandecc sw;nand erase ${uboot_addr} 100000;" \ |
| "nand write ${loadaddr} ${uboot_addr} 80000\0" \ |
| "updatemlo=nandecc hw;nand erase 0 20000;" \ |
| "nand write ${loadaddr} 0 20000\0" \ |
| "upd=if run load;then echo Updating u-boot;if run update;" \ |
| "then echo U-Boot updated;" \ |
| "else echo Error updating u-boot !;" \ |
| "echo Board without bootloader !!;" \ |
| "fi;" \ |
| "else echo U-Boot not downloaded..exiting;fi\0" \ |
| "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ |
| "bootscript=echo Running bootscript from mmc ...; " \ |
| "source ${loadaddr}\0" \ |
| "nandargs=setenv bootargs ubi.mtd=7 " \ |
| "root=ubi0:rootfs rootfstype=ubifs\0" \ |
| "nandboot=echo Booting from nand ...; " \ |
| "run nandargs; " \ |
| "ubi part nand0,4;" \ |
| "ubi readvol ${loadaddr} kernel;" \ |
| "run addtty addmtd addfb addeth addmisc;" \ |
| "bootm ${loadaddr}\0" \ |
| "preboot=ubi part nand0,7;" \ |
| "ubi readvol ${loadaddr} splash;" \ |
| "bmp display ${loadaddr};" \ |
| "gpio set 55\0" \ |
| "swupdate_args=setenv bootargs root=/dev/ram " \ |
| "quiet loglevel=1 " \ |
| "consoleblank=0 ${swupdate_misc}\0" \ |
| "swupdate=echo Running Sw-Update...;" \ |
| "if printenv mtdparts;then echo Starting SwUpdate...; " \ |
| "else mtdparts default;fi; " \ |
| "ubi part nand0,5;" \ |
| "ubi readvol 0x82000000 kernel_recovery;" \ |
| "ubi part nand0,6;" \ |
| "ubi readvol 0x84000000 fs_recovery;" \ |
| "run swupdate_args; " \ |
| "setenv bootargs ${bootargs} " \ |
| "${mtdparts} " \ |
| "vram=6M omapfb.vram=1:2M,2:2M,3:2M " \ |
| "omapdss.def_disp=lcd;" \ |
| "bootm 0x82000000 0x84000000\0" \ |
| "bootcmd=mmc rescan;if fatload mmc 0 82000000 loadbootscr.scr;" \ |
| "then source 82000000;else run nandboot;fi\0" |
| |
| #define CONFIG_AUTO_COMPLETE |
| #define CONFIG_CMDLINE_EDITING |
| |
| /* |
| * Miscellaneous configurable options |
| */ |
| #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
| #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ |
| /* Print Buffer Size */ |
| #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ |
| sizeof(CONFIG_SYS_PROMPT) + 16) |
| #define CONFIG_SYS_MAXARGS 16 /* max number of command */ |
| /* args */ |
| /* Boot Argument Buffer Size */ |
| #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) |
| /* memtest works on */ |
| #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) |
| #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ |
| 0x01F00000) /* 31MB */ |
| |
| #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ |
| /* address */ |
| #define CONFIG_PREBOOT |
| |
| /* |
| * AM3517 has 12 GP timers, they can be driven by the system clock |
| * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). |
| * This rate is divided by a local divisor. |
| */ |
| #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 |
| #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ |
| |
| /* |
| * Physical Memory Map |
| */ |
| #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ |
| #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 |
| #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 |
| |
| /* |
| * FLASH and environment organization |
| */ |
| |
| /* **** PISMO SUPPORT *** */ |
| #define CONFIG_NAND |
| #define CONFIG_SYS_NAND_BUSWIDTH_16BIT |
| #define CONFIG_NAND_OMAP_GPMC |
| #define CONFIG_NAND_OMAP_GPMC_PREFETCH |
| #define CONFIG_ENV_IS_IN_NAND |
| #define SMNAND_ENV_OFFSET 0x180000 /* environment starts here */ |
| |
| /* Redundant Environment */ |
| #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ |
| #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET |
| #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET |
| #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ |
| 2 * CONFIG_SYS_ENV_SECT_SIZE) |
| #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE |
| |
| /* Flash banks JFFS2 should use */ |
| #define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ |
| CONFIG_SYS_MAX_NAND_DEVICE) |
| #define CONFIG_SYS_JFFS2_MEM_NAND |
| /* use flash_info[2] */ |
| #define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS |
| #define CONFIG_SYS_JFFS2_NUM_BANKS 1 |
| |
| #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 |
| #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 |
| #define CONFIG_SYS_INIT_RAM_SIZE 0x800 |
| #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ |
| CONFIG_SYS_INIT_RAM_SIZE - \ |
| GENERATED_GBL_DATA_SIZE) |
| |
| /* Defines for SPL */ |
| #define CONFIG_SPL_FRAMEWORK |
| #define CONFIG_SPL_BOARD_INIT |
| #define CONFIG_SPL_NAND_SIMPLE |
| |
| #define CONFIG_SPL_LIBCOMMON_SUPPORT |
| #define CONFIG_SPL_LIBDISK_SUPPORT |
| #define CONFIG_SPL_I2C_SUPPORT |
| #define CONFIG_SPL_MMC_SUPPORT |
| #define CONFIG_SPL_FAT_SUPPORT |
| #define CONFIG_SPL_LIBGENERIC_SUPPORT |
| #define CONFIG_SPL_SERIAL_SUPPORT |
| #define CONFIG_SPL_POWER_SUPPORT |
| #define CONFIG_SPL_NAND_SUPPORT |
| #define CONFIG_SPL_NAND_BASE |
| #define CONFIG_SPL_NAND_DRIVERS |
| #define CONFIG_SPL_NAND_ECC |
| #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" |
| |
| #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ |
| #define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ |
| #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK |
| |
| /* move malloc and bss high to prevent clashing with the main image */ |
| #define CONFIG_SYS_SPL_MALLOC_START 0x8f000000 |
| #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 |
| #define CONFIG_SPL_BSS_START_ADDR 0x8f080000 /* end of RAM */ |
| #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 |
| |
| #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ |
| #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 |
| #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" |
| |
| /* NAND boot config */ |
| #define CONFIG_SYS_NAND_PAGE_COUNT 64 |
| #define CONFIG_SYS_NAND_PAGE_SIZE 2048 |
| #define CONFIG_SYS_NAND_OOBSIZE 64 |
| #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) |
| #define CONFIG_SYS_NAND_5_ADDR_CYCLE |
| #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 |
| #define CONFIG_SYS_NAND_ECCPOS {40, 41, 42, 43, 44, 45, 46, 47,\ |
| 48, 49, 50, 51, 52, 53, 54, 55,\ |
| 56, 57, 58, 59, 60, 61, 62, 63} |
| #define CONFIG_SYS_NAND_ECCSIZE 256 |
| #define CONFIG_SYS_NAND_ECCBYTES 3 |
| #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_SW |
| #define CONFIG_SPL_NAND_SOFTECC |
| |
| #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE |
| |
| #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 |
| |
| /* |
| * ethernet support |
| * |
| */ |
| #if defined(CONFIG_CMD_NET) |
| #define CONFIG_DRIVER_TI_EMAC |
| #define CONFIG_DRIVER_TI_EMAC_USE_RMII |
| #define CONFIG_MII |
| #define CONFIG_BOOTP_DNS |
| #define CONFIG_BOOTP_DNS2 |
| #define CONFIG_BOOTP_SEND_HOSTNAME |
| #define CONFIG_NET_RETRY_COUNT 10 |
| #endif |
| |
| #define CONFIG_VIDEO |
| #define CONFIG_CFB_CONSOLE |
| #define CONFIG_VGA_AS_SINGLE_DEVICE |
| #define CONFIG_SPLASH_SCREEN |
| #define CONFIG_VIDEO_BMP_RLE8 |
| #define CONFIG_CMD_BMP |
| #define CONFIG_VIDEO_OMAP3 |
| #define CONFIG_SYS_CONSOLE_IS_IN_ENV |
| |
| #endif /* __CONFIG_H */ |
