| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2016 - Beniamino Galvani <b.galvani@gmail.com> |
| */ |
| |
| #include <asm/gpio.h> |
| #include <common.h> |
| #include <dm.h> |
| #include <dm/pinctrl.h> |
| #include <linux/io.h> |
| #include "pinctrl-meson-gx.h" |
| |
| static void meson_gx_pinmux_disable_other_groups(struct meson_pinctrl *priv, |
| unsigned int pin, |
| int sel_group) |
| { |
| struct meson_pmx_group *group; |
| struct meson_gx_pmx_data *pmx_data; |
| void __iomem *addr; |
| int i, j; |
| |
| for (i = 0; i < priv->data->num_groups; i++) { |
| group = &priv->data->groups[i]; |
| pmx_data = (struct meson_gx_pmx_data *)group->data; |
| if (pmx_data->is_gpio || i == sel_group) |
| continue; |
| |
| for (j = 0; j < group->num_pins; j++) { |
| if (group->pins[j] == pin) { |
| /* We have found a group using the pin */ |
| debug("pinmux: disabling %s\n", group->name); |
| addr = priv->reg_mux + pmx_data->reg * 4; |
| writel(readl(addr) & ~BIT(pmx_data->bit), addr); |
| } |
| } |
| } |
| } |
| |
| static int meson_gx_pinmux_group_set(struct udevice *dev, |
| unsigned int group_selector, |
| unsigned int func_selector) |
| { |
| struct meson_pinctrl *priv = dev_get_priv(dev); |
| const struct meson_pmx_group *group; |
| const struct meson_pmx_func *func; |
| struct meson_gx_pmx_data *pmx_data; |
| void __iomem *addr; |
| int i; |
| |
| group = &priv->data->groups[group_selector]; |
| pmx_data = (struct meson_gx_pmx_data *)group->data; |
| func = &priv->data->funcs[func_selector]; |
| |
| debug("pinmux: set group %s func %s\n", group->name, func->name); |
| |
| /* |
| * Disable groups using the same pins. |
| * The selected group is not disabled to avoid glitches. |
| */ |
| for (i = 0; i < group->num_pins; i++) { |
| meson_gx_pinmux_disable_other_groups(priv, |
| group->pins[i], |
| group_selector); |
| } |
| |
| /* Function 0 (GPIO) doesn't need any additional setting */ |
| if (func_selector) { |
| addr = priv->reg_mux + pmx_data->reg * 4; |
| writel(readl(addr) | BIT(pmx_data->bit), addr); |
| } |
| |
| return 0; |
| } |
| |
| const struct pinconf_param meson_gx_pinconf_params[] = { |
| { "bias-disable", PIN_CONFIG_BIAS_DISABLE, 0 }, |
| { "bias-pull-up", PIN_CONFIG_BIAS_PULL_UP, 1 }, |
| { "bias-pull-down", PIN_CONFIG_BIAS_PULL_DOWN, 1 }, |
| }; |
| |
| const struct pinctrl_ops meson_gx_pinctrl_ops = { |
| .get_groups_count = meson_pinctrl_get_groups_count, |
| .get_group_name = meson_pinctrl_get_group_name, |
| .get_functions_count = meson_pinmux_get_functions_count, |
| .get_function_name = meson_pinmux_get_function_name, |
| .pinmux_group_set = meson_gx_pinmux_group_set, |
| .set_state = pinctrl_generic_set_state, |
| .pinconf_params = meson_gx_pinconf_params, |
| .pinconf_num_params = ARRAY_SIZE(meson_gx_pinconf_params), |
| .pinconf_set = meson_pinconf_set, |
| .pinconf_group_set = meson_pinconf_group_set, |
| }; |
| |
| static const struct dm_gpio_ops meson_gx_gpio_ops = { |
| .set_value = meson_gpio_set, |
| .get_value = meson_gpio_get, |
| .get_function = meson_gpio_get_direction, |
| .direction_input = meson_gpio_direction_input, |
| .direction_output = meson_gpio_direction_output, |
| }; |
| |
| const struct driver meson_gx_gpio_driver = { |
| .name = "meson-gx-gpio", |
| .id = UCLASS_GPIO, |
| .probe = meson_gpio_probe, |
| .ops = &meson_gx_gpio_ops, |
| }; |