| CONFIG_ARM=y |
| CONFIG_TARGET_LS1012AQDS=y |
| CONFIG_SYS_TEXT_BASE=0x82000000 |
| CONFIG_QSPI_AHB_INIT=y |
| CONFIG_TFABOOT=y |
| CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y |
| CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y |
| CONFIG_AHCI=y |
| CONFIG_DISTRO_DEFAULTS=y |
| CONFIG_NR_DRAM_BANKS=2 |
| # CONFIG_SYS_MALLOC_F is not set |
| CONFIG_FIT_VERBOSE=y |
| CONFIG_OF_BOARD_SETUP=y |
| CONFIG_OF_STDOUT_VIA_ALIAS=y |
| CONFIG_BOOTDELAY=10 |
| CONFIG_USE_BOOTARGS=y |
| CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000" |
| # CONFIG_USE_BOOTCOMMAND is not set |
| CONFIG_MISC_INIT_R=y |
| # CONFIG_DISPLAY_BOARDINFO is not set |
| CONFIG_DISPLAY_BOARDINFO_LATE=y |
| CONFIG_CMD_GREPENV=y |
| CONFIG_CMD_EEPROM=y |
| CONFIG_CMD_MEMTEST=y |
| CONFIG_CMD_GPT=y |
| CONFIG_CMD_I2C=y |
| CONFIG_CMD_MMC=y |
| CONFIG_CMD_PCI=y |
| CONFIG_CMD_SF=y |
| CONFIG_CMD_SPI=y |
| CONFIG_DEFAULT_SPI_BUS=1 |
| CONFIG_CMD_USB=y |
| # CONFIG_CMD_SETEXPR is not set |
| CONFIG_CMD_CACHE=y |
| CONFIG_CMD_DATE=y |
| CONFIG_OF_CONTROL=y |
| CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-qds" |
| CONFIG_ENV_IS_IN_SPI_FLASH=y |
| CONFIG_USE_ENV_SPI_BUS=y |
| CONFIG_ENV_SPI_BUS=0 |
| CONFIG_USE_ENV_SPI_MAX_HZ=y |
| CONFIG_ENV_SPI_MAX_HZ=1000000 |
| CONFIG_USE_ENV_SPI_MODE=y |
| CONFIG_ENV_SPI_MODE=0x03 |
| CONFIG_NET_RANDOM_ETHADDR=y |
| CONFIG_DM=y |
| CONFIG_SCSI_AHCI=y |
| CONFIG_SATA_CEVA=y |
| CONFIG_DM_MMC=y |
| CONFIG_FSL_ESDHC=y |
| CONFIG_DM_SPI_FLASH=y |
| CONFIG_SPI_FLASH=y |
| CONFIG_SF_DEFAULT_BUS=1 |
| CONFIG_SF_DEFAULT_MODE=0 |
| CONFIG_SF_DEFAULT_SPEED=10000000 |
| # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set |
| CONFIG_FSL_PFE=y |
| CONFIG_DM_ETH=y |
| CONFIG_E1000=y |
| CONFIG_PCI=y |
| CONFIG_DM_PCI=y |
| CONFIG_DM_PCI_COMPAT=y |
| CONFIG_PCIE_LAYERSCAPE=y |
| CONFIG_SCSI=y |
| CONFIG_DM_SCSI=y |
| CONFIG_SYS_NS16550=y |
| CONFIG_SPI=y |
| CONFIG_DM_SPI=y |
| CONFIG_FSL_DSPI=y |
| CONFIG_USB=y |
| CONFIG_DM_USB=y |
| CONFIG_USB_XHCI_HCD=y |
| CONFIG_USB_XHCI_DWC3=y |
