| if OMAP34XX |
| |
| # We only enable the clocks for the GPIO banks that a given board requies. |
| config OMAP3_GPIO_2 |
| bool |
| default y if CMD_GPIO |
| |
| config OMAP3_GPIO_3 |
| bool |
| default y if CMD_GPIO |
| |
| config OMAP3_GPIO_4 |
| bool |
| default y if CMD_GPIO |
| |
| config OMAP3_GPIO_5 |
| bool |
| default y if CMD_GPIO |
| |
| config OMAP3_GPIO_6 |
| bool |
| default y if CMD_GPIO |
| |
| choice |
| prompt "OMAP3 board select" |
| optional |
| |
| config TARGET_AM3517_EVM |
| bool "AM3517 EVM" |
| select DM |
| select DM_GPIO |
| select DM_I2C |
| select DM_MMC |
| select DM_SERIAL |
| imply CMD_DM |
| |
| config TARGET_MT_VENTOUX |
| bool "TeeJet Mt.Ventoux" |
| select OMAP3_GPIO_4 |
| select OMAP3_GPIO_5 if USB_EHCI_HCD |
| |
| config TARGET_OMAP3_BEAGLE |
| bool "TI OMAP3 BeagleBoard" |
| select DM |
| select DM_GPIO |
| select DM_SERIAL |
| select OMAP3_GPIO_5 |
| select OMAP3_GPIO_6 |
| imply CMD_DM |
| |
| config TARGET_CM_T35 |
| bool "CompuLab CM-T3530 and CM-T3730 boards" |
| select OMAP3_GPIO_2 |
| select OMAP3_GPIO_5 |
| select OMAP3_GPIO_6 if LED_STATUS |
| |
| config TARGET_CM_T3517 |
| bool "CompuLab CM-T3517 boards" |
| select OMAP3_GPIO_2 |
| select OMAP3_GPIO_5 |
| select OMAP3_GPIO_6 if LED_STATUS |
| |
| config TARGET_DEVKIT8000 |
| bool "TimLL OMAP3 Devkit8000" |
| select DM |
| select DM_GPIO |
| select DM_SERIAL |
| imply CMD_DM |
| |
| config TARGET_OMAP3_EVM |
| bool "TI OMAP3 EVM" |
| select DM |
| select DM_GPIO |
| select DM_SERIAL |
| select OMAP3_GPIO_3 |
| imply CMD_DM |
| |
| config TARGET_OMAP3_IGEP00X0 |
| bool "IGEP" |
| select DM |
| select DM_GPIO |
| select DM_SERIAL |
| select OMAP3_GPIO_3 |
| select OMAP3_GPIO_5 |
| select OMAP3_GPIO_6 |
| imply CMD_DM |
| |
| config TARGET_OMAP3_OVERO |
| bool "OMAP35xx Gumstix Overo" |
| select DM |
| select DM_GPIO |
| select DM_SERIAL |
| select OMAP3_GPIO_2 |
| select OMAP3_GPIO_3 |
| select OMAP3_GPIO_4 |
| select OMAP3_GPIO_5 |
| select OMAP3_GPIO_6 |
| imply CMD_DM |
| |
| config TARGET_OMAP3_ZOOM1 |
| bool "TI Zoom1" |
| select DM |
| select DM_GPIO |
| select DM_SERIAL |
| imply CMD_DM |
| |
| config TARGET_AM3517_CRANE |
| bool "am3517_crane" |
| |
| config TARGET_OMAP3_PANDORA |
| bool "OMAP3 Pandora" |
| select OMAP3_GPIO_4 |
| select OMAP3_GPIO_6 |
| |
| config TARGET_ECO5PK |
| bool "ECO5PK" |
| select OMAP3_GPIO_5 if USB_EHCI_HCD |
| |
| config TARGET_TRICORDER |
| bool "Tricorder" |
| select OMAP3_GPIO_2 |
| |
| config TARGET_MCX |
| bool "MCX" |
| select BOARD_LATE_INIT |
| select OMAP3_GPIO_2 if USB_EHCI_HCD |
| select OMAP3_GPIO_5 if USB_EHCI_HCD |
| |
| config TARGET_OMAP3_LOGIC |
| bool "OMAP3 Logic" |
| select BOARD_LATE_INIT |
| select DM |
| select DM_GPIO |
| select DM_SERIAL |
| select OMAP3_GPIO_3 |
| select OMAP3_GPIO_4 |
| select OMAP3_GPIO_6 |
| imply CMD_DM |
| |
| config TARGET_NOKIA_RX51 |
| bool "Nokia RX51" |
| |
| config TARGET_TAO3530 |
| bool "TAO3530" |
| select OMAP3_GPIO_2 |
| select OMAP3_GPIO_3 |
| select OMAP3_GPIO_4 |
| select OMAP3_GPIO_5 |
| select OMAP3_GPIO_6 |
| |
| config TARGET_TWISTER |
| bool "Twister" |
| select OMAP3_GPIO_2 |
| select OMAP3_GPIO_5 if USB_EHCI_HCD |
| |
| config TARGET_OMAP3_CAIRO |
| bool "QUIPOS CAIRO" |
| select DM |
| select DM_GPIO |
| select DM_SERIAL |
| imply CMD_DM |
| |
| config TARGET_SNIPER |
| bool "LG Optimus Black" |
| select DM |
| select DM_GPIO |
| select DM_SERIAL |
| select OMAP3_GPIO_2 |
| select OMAP3_GPIO_3 |
| select OMAP3_GPIO_4 |
| select OMAP3_GPIO_5 |
| select OMAP3_GPIO_6 |
| imply CMD_DM |
| |
| endchoice |
| |
| choice |
| prompt "Memory Controller" |
| default SDRC |
| |
| config SDRC |
| bool "SDRC controller" |
| help |
| The default memory controller on most OMAP3 boards is SDRC. |
| |
| config EMIF4 |
| bool "EMIF4 controller" |
| help |
| Enable this on boards like AM3517 which use EMIF4 controller |
| endchoice |
| |
| config SPL_OMAP3_ID_NAND |
| bool "Support OMAP3-specific ID and MFR function" |
| help |
| Support for an OMAP3-specific set of functions to return the |
| ID and MFR of the first attached NAND chip, if present. |
| |
| config SYS_SOC |
| default "omap3" |
| |
| source "board/logicpd/am3517evm/Kconfig" |
| source "board/teejet/mt_ventoux/Kconfig" |
| source "board/ti/beagle/Kconfig" |
| source "board/compulab/cm_t35/Kconfig" |
| source "board/compulab/cm_t3517/Kconfig" |
| source "board/timll/devkit8000/Kconfig" |
| source "board/ti/evm/Kconfig" |
| source "board/isee/igep00x0/Kconfig" |
| source "board/overo/Kconfig" |
| source "board/logicpd/zoom1/Kconfig" |
| source "board/ti/am3517crane/Kconfig" |
| source "board/pandora/Kconfig" |
| source "board/8dtech/eco5pk/Kconfig" |
| source "board/corscience/tricorder/Kconfig" |
| source "board/htkw/mcx/Kconfig" |
| source "board/logicpd/omap3som/Kconfig" |
| source "board/nokia/rx51/Kconfig" |
| source "board/technexion/tao3530/Kconfig" |
| source "board/technexion/twister/Kconfig" |
| source "board/quipos/cairo/Kconfig" |
| source "board/lg/sniper/Kconfig" |
| |
| endif |
