| #ifndef __USB_COMPAT_H__ |
| #define __USB_COMPAT_H__ |
| |
| #include <dm.h> |
| #include "usb.h" |
| |
| struct usb_hcd { |
| void *hcd_priv; |
| }; |
| |
| struct usb_host_endpoint { |
| struct usb_endpoint_descriptor desc; |
| struct list_head urb_list; |
| void *hcpriv; |
| }; |
| |
| /* |
| * urb->transfer_flags: |
| * |
| * Note: URB_DIR_IN/OUT is automatically set in usb_submit_urb(). |
| */ |
| #define URB_SHORT_NOT_OK 0x0001 /* report short reads as errors */ |
| #define URB_ZERO_PACKET 0x0040 /* Finish bulk OUT with short packet */ |
| |
| struct urb; |
| |
| typedef void (*usb_complete_t)(struct urb *); |
| |
| struct urb { |
| void *hcpriv; /* private data for host controller */ |
| struct list_head urb_list; /* list head for use by the urb's |
| * current owner */ |
| struct usb_device *dev; /* (in) pointer to associated device */ |
| struct usb_host_endpoint *ep; /* (internal) pointer to endpoint */ |
| unsigned int pipe; /* (in) pipe information */ |
| int status; /* (return) non-ISO status */ |
| unsigned int transfer_flags; /* (in) URB_SHORT_NOT_OK | ...*/ |
| void *transfer_buffer; /* (in) associated data buffer */ |
| dma_addr_t transfer_dma; /* (in) dma addr for transfer_buffer */ |
| u32 transfer_buffer_length; /* (in) data buffer length */ |
| u32 actual_length; /* (return) actual transfer length */ |
| unsigned char *setup_packet; /* (in) setup packet (control only) */ |
| int start_frame; /* (modify) start frame (ISO) */ |
| usb_complete_t complete; /* (in) completion routine */ |
| }; |
| |
| #define usb_hcd_link_urb_to_ep(hcd, urb) ({ \ |
| int ret = 0; \ |
| list_add_tail(&urb->urb_list, &urb->ep->urb_list); \ |
| ret; }) |
| #define usb_hcd_unlink_urb_from_ep(hcd, urb) list_del_init(&urb->urb_list) |
| #define usb_hcd_check_unlink_urb(hdc, urb, status) 0 |
| |
| static inline void usb_hcd_giveback_urb(struct usb_hcd *hcd, |
| struct urb *urb, |
| int status) |
| { |
| urb->status = status; |
| if (urb->complete) |
| urb->complete(urb); |
| } |
| |
| static inline int usb_hcd_unmap_urb_for_dma(struct usb_hcd *hcd, |
| struct urb *urb) |
| { |
| /* TODO: add cache invalidation here */ |
| return 0; |
| } |
| |
| #if CONFIG_IS_ENABLED(DM_USB) |
| static inline struct usb_device *usb_dev_get_parent(struct usb_device *udev) |
| { |
| struct udevice *parent = udev->dev->parent; |
| |
| /* |
| * When called from usb-uclass.c: usb_scan_device() udev->dev points |
| * to the parent udevice, not the actual udevice belonging to the |
| * udev as the device is not instantiated yet. |
| * |
| * If dev is an usb-bus, then we are called from usb_scan_device() for |
| * an usb-device plugged directly into the root port, return NULL. |
| */ |
| if (device_get_uclass_id(udev->dev) == UCLASS_USB) |
| return NULL; |
| |
| /* |
| * If these 2 are not the same we are being called from |
| * usb_scan_device() and udev itself is the parent. |
| */ |
| if (dev_get_parent_priv(udev->dev) != udev) |
| return udev; |
| |
| /* We are being called normally, use the parent pointer */ |
| if (device_get_uclass_id(parent) == UCLASS_USB_HUB) |
| return dev_get_parent_priv(parent); |
| |
| return NULL; |
| } |
| #else |
| static inline struct usb_device *usb_dev_get_parent(struct usb_device *dev) |
| { |
| return dev->parent; |
| } |
| #endif |
| |
| #endif /* __USB_COMPAT_H__ */ |