arch/arm/dts/exynos7420.dtsi

// SPDX-License-Identifier: GPL-2.0+
/*
 * Samsung Exynos7420 SoC device tree source
 *
 * Copyright (c) 2016 Samsung Electronics Co., Ltd.
 *		http://www.samsung.com
 */

/dts-v1/;
#include "skeleton.dtsi"
#include <dt-bindings/clock/exynos7420-clk.h>
/ {
	compatible = "samsung,exynos7420";

	fin_pll: xxti {
		compatible = "fixed-clock";
		clock-output-names = "fin_pll";
		u-boot,dm-pre-reloc;
		#clock-cells = <0>;
	};

	clock_topc: clock-controller@10570000 {
		compatible = "samsung,exynos7-clock-topc";
		reg = <0x10570000 0x10000>;
		u-boot,dm-pre-reloc;
		#clock-cells = <1>;
		clocks = <&fin_pll>;
		clock-names = "fin_pll";
	};

	clock_top0: clock-controller@105d0000 {
		compatible = "samsung,exynos7-clock-top0";
		reg = <0x105d0000 0xb000>;
		u-boot,dm-pre-reloc;
		#clock-cells = <1>;
		clocks = <&fin_pll>, <&clock_topc DOUT_SCLK_BUS0_PLL>,
			 <&clock_topc DOUT_SCLK_BUS1_PLL>,
			 <&clock_topc DOUT_SCLK_CC_PLL>,
			 <&clock_topc DOUT_SCLK_MFC_PLL>;
		clock-names = "fin_pll", "dout_sclk_bus0_pll",
			      "dout_sclk_bus1_pll", "dout_sclk_cc_pll",
			      "dout_sclk_mfc_pll";
	};

	clock_peric1: clock-controller@14c80000 {
		compatible = "samsung,exynos7-clock-peric1";
		reg = <0x14c80000 0xd00>;
		u-boot,dm-pre-reloc;
		#clock-cells = <1>;
		clocks = <&fin_pll>, <&clock_top0 DOUT_ACLK_PERIC1>,
			 <&clock_top0 CLK_SCLK_UART1>,
			 <&clock_top0 CLK_SCLK_UART2>,
			 <&clock_top0 CLK_SCLK_UART3>;
		clock-names = "fin_pll", "dout_aclk_peric1_66",
			      "sclk_uart1", "sclk_uart2", "sclk_uart3";
	};

	pinctrl@13470000 {
		compatible = "samsung,exynos7420-pinctrl";
		reg = <0x13470000 0x1000>;
		u-boot,dm-pre-reloc;

		serial2_bus: serial2-bus {
			samsung,pins = "gpd1-4", "gpd1-5";
			samsung,pin-function = <2>;
			samsung,pin-pud = <3>;
			samsung,pin-drv = <0>;
			u-boot,dm-pre-reloc;
		};
	};

	serial@14C30000 {
		compatible = "samsung,exynos4210-uart";
		reg = <0x14C30000 0x100>;
		u-boot,dm-pre-reloc;
		clocks = <&clock_peric1 PCLK_UART2>,
			 <&clock_peric1 SCLK_UART2>;
		clock-names = "uart", "clk_uart_baud0";
		pinctrl-names = "default";
		pinctrl-0 = <&serial2_bus>;
	};
};