| if ARCH_MX7 |
| |
| config MX7 |
| bool |
| default y |
| select ARCH_SUPPORT_PSCI |
| select CPU_V7_HAS_NONSEC |
| select CPU_V7_HAS_VIRT |
| select ROM_UNIFIED_SECTIONS |
| select SYSCOUNTER_TIMER |
| imply CMD_FUSE |
| |
| config MX7D |
| bool |
| select HAS_CAAM |
| select ROM_UNIFIED_SECTIONS |
| imply CMD_FUSE |
| |
| config IMX_TAMPER |
| bool "Enable commands for SNVS tamper pin configuration and test" |
| help |
| Set "Y" to enable the tamper commands |
| |
| choice |
| prompt "MX7 board select" |
| optional |
| |
| config TARGET_CL_SOM_IMX7 |
| bool "CL-SOM-iMX7" |
| select DM |
| select DM_THERMAL |
| select MX7D |
| select SUPPORT_SPL |
| imply CMD_DM |
| |
| config TARGET_MX7DSABRESD |
| bool "mx7dsabresd" |
| select BOARD_LATE_INIT |
| select DM |
| select DM_THERMAL |
| select MX7D |
| imply CMD_DM |
| |
| config TARGET_MX7D_12X12_LPDDR3_ARM2 |
| bool "Support mx7d_12x12_lpddr3_arm2" |
| select BOARD_LATE_INIT |
| select MX7D |
| select DM |
| select DM_THERMAL |
| imply CMD_DM |
| |
| config TARGET_MX7D_12X12_DDR3_ARM2 |
| bool "Support mx7d_12x12_ddr3_arm2" |
| select BOARD_LATE_INIT |
| select MX7D |
| select DM |
| select DM_THERMAL |
| imply CMD_DM |
| |
| config TARGET_MX7D_19X19_DDR3_ARM2 |
| bool "Support mx7d_19x19_ddr3_arm2" |
| select BOARD_LATE_INIT |
| select MX7D |
| select DM |
| select DM_THERMAL |
| imply CMD_DM |
| |
| config TARGET_MX7D_19X19_LPDDR3_ARM2 |
| bool "Support mx7d_19x19_lpddr3_arm2" |
| select BOARD_LATE_INIT |
| select MX7D |
| select DM |
| select DM_THERMAL |
| imply CMD_DM |
| |
| config TARGET_MX7D_19X19_LPDDR2_ARM2 |
| bool "Support mx7d_19x19_lpddr2_arm2" |
| select BOARD_LATE_INIT |
| select MX7D |
| select DM |
| select DM_THERMAL |
| imply CMD_DM |
| |
| config TARGET_PICO_IMX7D |
| bool "pico-imx7d" |
| select BOARD_LATE_INIT |
| select DM |
| select DM_THERMAL |
| select MX7D |
| select SUPPORT_SPL |
| imply CMD_DM |
| |
| config TARGET_WARP7 |
| bool "warp7" |
| select BOARD_LATE_INIT |
| select DM |
| select DM_THERMAL |
| select MX7D |
| imply CMD_DM |
| |
| config TARGET_COLIBRI_IMX7 |
| bool "Support Colibri iMX7S/iMX7D modules" |
| select DM |
| select DM_SERIAL |
| select DM_THERMAL |
| imply CMD_DM |
| |
| endchoice |
| |
| config SYS_SOC |
| default "mx7" |
| |
| source "board/compulab/cl-som-imx7/Kconfig" |
| source "board/freescale/mx7dsabresd/Kconfig" |
| source "board/freescale/mx7d_12x12_lpddr3_arm2/Kconfig" |
| source "board/freescale/mx7d_12x12_ddr3_arm2/Kconfig" |
| source "board/freescale/mx7d_19x19_ddr3_arm2/Kconfig" |
| source "board/freescale/mx7d_19x19_lpddr3_arm2/Kconfig" |
| source "board/technexion/pico-imx7d/Kconfig" |
| source "board/toradex/colibri_imx7/Kconfig" |
| source "board/warp7/Kconfig" |
| |
| endif |
