board/ti/common/board_detect.c - uboot-imx - Git at Google

 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Library to support early TI EVM EEPROM handling
  *
  * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
  *	Lokesh Vutla
  *	Steve Kipisz
  */

 #include <common.h>
 #include <asm/omap_common.h>
 #include <dm/uclass.h>
 #include <i2c.h>

 #include "board_detect.h"

 #if !defined(CONFIG_DM_I2C)
 /**
  * ti_i2c_eeprom_init - Initialize an i2c bus and probe for a device
  * @i2c_bus: i2c bus number to initialize
  * @dev_addr: Device address to probe for
  *
  * Return: 0 on success or corresponding error on failure.
  */
 static int __maybe_unused ti_i2c_eeprom_init(int i2c_bus, int dev_addr)
 {
 	int rc;

 	if (i2c_bus >= 0) {
 		rc = i2c_set_bus_num(i2c_bus);
 		if (rc)
 			return rc;
 	}

 	return i2c_probe(dev_addr);
 }

 /**
  * ti_i2c_eeprom_read - Read data from an EEPROM
  * @dev_addr: The device address of the EEPROM
  * @offset: Offset to start reading in the EEPROM
  * @ep: Pointer to a buffer to read into
  * @epsize: Size of buffer
  *
  * Return: 0 on success or corresponding result of i2c_read
  */
 static int __maybe_unused ti_i2c_eeprom_read(int dev_addr, int offset,
 					     uchar *ep, int epsize)
 {
 	return i2c_read(dev_addr, offset, 2, ep, epsize);
 }
 #endif

 /**
  * ti_eeprom_string_cleanup() - Handle eeprom programming errors
  * @s:	eeprom string (should be NULL terminated)
  *
  * Some Board manufacturers do not add a NULL termination at the
  * end of string, instead some binary information is kludged in, hence
  * convert the string to just printable characters of ASCII chart.
  */
 static void __maybe_unused ti_eeprom_string_cleanup(char *s)
 {
 	int i, l;

 	l = strlen(s);
 	for (i = 0; i < l; i++, s++)
 		if (*s < ' ' || *s > '~') {
 			*s = 0;
 			break;
 		}
 }

 __weak void gpi2c_init(void)
 {
 }

 static int __maybe_unused ti_i2c_eeprom_get(int bus_addr, int dev_addr,
 					    u32 header, u32 size, uint8_t *ep)
 {
 	u32 hdr_read;
 	int rc;

 #if defined(CONFIG_DM_I2C)
 	struct udevice *dev;
 	struct udevice *bus;

 	rc = uclass_get_device_by_seq(UCLASS_I2C, bus_addr, &bus);
 	if (rc)
 		return rc;
 	rc = i2c_get_chip(bus, dev_addr, 1, &dev);
 	if (rc)
 		return rc;

 	/*
 	 * Read the header first then only read the other contents.
 	 */
 	rc = i2c_set_chip_offset_len(dev, 2);
 	if (rc)
 		return rc;

 	rc = dm_i2c_read(dev, 0, (uint8_t *)&hdr_read, 4);
 	if (rc)
 		return rc;

 	/* Corrupted data??? */
 	if (hdr_read != header) {
 		rc = dm_i2c_read(dev, 0, (uint8_t *)&hdr_read, 4);
 		/*
 		 * read the eeprom header using i2c again, but use only a
 		 * 1 byte address (some legacy boards need this..)
 		 */
 		if (rc) {
 			rc =  i2c_set_chip_offset_len(dev, 1);
 			if (rc)
 				return rc;

 			rc = dm_i2c_read(dev, 0, (uint8_t *)&hdr_read, 4);
 		}
 		if (rc)
 			return rc;
 	}
 	if (hdr_read != header)
 		return -1;

 	rc = dm_i2c_read(dev, 0, ep, size);
 	if (rc)
 		return rc;
 #else
 	u32 byte;

 	gpi2c_init();
 	rc = ti_i2c_eeprom_init(bus_addr, dev_addr);
 	if (rc)
 		return rc;

 	/*
 	 * Read the header first then only read the other contents.
 	 */
 	byte = 2;

 	rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read, 4);
 	if (rc)
 		return rc;

 	/* Corrupted data??? */
 	if (hdr_read != header) {
 		rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read, 4);
 		/*
 		 * read the eeprom header using i2c again, but use only a
 		 * 1 byte address (some legacy boards need this..)
 		 */
 		byte = 1;
 		if (rc) {
 			rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read,
 				      4);
 		}
 		if (rc)
 			return rc;
 	}
 	if (hdr_read != header)
 		return -1;

 	rc = i2c_read(dev_addr, 0x0, byte, ep, size);
 	if (rc)
 		return rc;
 #endif
 	return 0;
 }

 int __maybe_unused ti_i2c_eeprom_am_set(const char *name, const char *rev)
 {
 	struct ti_common_eeprom *ep;

 	if (!name || !rev)
 		return -1;

 	ep = TI_EEPROM_DATA;
 	if (ep->header == TI_EEPROM_HEADER_MAGIC)
 		goto already_set;

 	/* Set to 0 all fields */
 	memset(ep, 0, sizeof(*ep));
 	strncpy(ep->name, name, TI_EEPROM_HDR_NAME_LEN);
 	strncpy(ep->version, rev, TI_EEPROM_HDR_REV_LEN);
 	/* Some dummy serial number to identify the platform */
 	strncpy(ep->serial, "0000", TI_EEPROM_HDR_SERIAL_LEN);
 	/* Mark it with a valid header */
 	ep->header = TI_EEPROM_HEADER_MAGIC;

 already_set:
 	return 0;
 }

 int __maybe_unused ti_i2c_eeprom_am_get(int bus_addr, int dev_addr)
 {
 	int rc;
 	struct ti_am_eeprom am_ep;
 	struct ti_common_eeprom *ep;

 	ep = TI_EEPROM_DATA;
 #ifndef CONFIG_SPL_BUILD
 	if (ep->header == TI_EEPROM_HEADER_MAGIC)
 		return 0; /* EEPROM has already been read */
 #endif

 	/* Initialize with a known bad marker for i2c fails.. */
 	ep->header = TI_DEAD_EEPROM_MAGIC;
 	ep->name[0] = 0x0;
 	ep->version[0] = 0x0;
 	ep->serial[0] = 0x0;
 	ep->config[0] = 0x0;

 	rc = ti_i2c_eeprom_get(bus_addr, dev_addr, TI_EEPROM_HEADER_MAGIC,
 			       sizeof(am_ep), (uint8_t *)&am_ep);
 	if (rc)
 		return rc;

 	ep->header = am_ep.header;
 	strlcpy(ep->name, am_ep.name, TI_EEPROM_HDR_NAME_LEN + 1);
 	ti_eeprom_string_cleanup(ep->name);

 	/* BeagleBone Green '1' eeprom, board_rev: 0x1a 0x00 0x00 0x00 */
 	if (am_ep.version[0] == 0x1a && am_ep.version[1] == 0x00 &&
 	    am_ep.version[2] == 0x00 && am_ep.version[3] == 0x00)
 		strlcpy(ep->version, "BBG1", TI_EEPROM_HDR_REV_LEN + 1);
 	else
 		strlcpy(ep->version, am_ep.version, TI_EEPROM_HDR_REV_LEN + 1);
 	ti_eeprom_string_cleanup(ep->version);
 	strlcpy(ep->serial, am_ep.serial, TI_EEPROM_HDR_SERIAL_LEN + 1);
 	ti_eeprom_string_cleanup(ep->serial);
 	strlcpy(ep->config, am_ep.config, TI_EEPROM_HDR_CONFIG_LEN + 1);
 	ti_eeprom_string_cleanup(ep->config);

 	memcpy(ep->mac_addr, am_ep.mac_addr,
 	       TI_EEPROM_HDR_NO_OF_MAC_ADDR * TI_EEPROM_HDR_ETH_ALEN);

 	return 0;
 }

 int __maybe_unused ti_i2c_eeprom_dra7_get(int bus_addr, int dev_addr)
 {
 	int rc, offset = 0;
 	struct dra7_eeprom dra7_ep;
 	struct ti_common_eeprom *ep;

 	ep = TI_EEPROM_DATA;
 #ifndef CONFIG_SPL_BUILD
 	if (ep->header == DRA7_EEPROM_HEADER_MAGIC)
 		return 0; /* EEPROM has already been read */
 #endif

 	/* Initialize with a known bad marker for i2c fails.. */
 	ep->header = TI_DEAD_EEPROM_MAGIC;
 	ep->name[0] = 0x0;
 	ep->version[0] = 0x0;
 	ep->serial[0] = 0x0;
 	ep->config[0] = 0x0;
 	ep->emif1_size = 0;
 	ep->emif2_size = 0;

 	rc = ti_i2c_eeprom_get(bus_addr, dev_addr, DRA7_EEPROM_HEADER_MAGIC,
 			       sizeof(dra7_ep), (uint8_t *)&dra7_ep);
 	if (rc)
 		return rc;

 	ep->header = dra7_ep.header;
 	strlcpy(ep->name, dra7_ep.name, TI_EEPROM_HDR_NAME_LEN + 1);
 	ti_eeprom_string_cleanup(ep->name);

 	offset = dra7_ep.version_major - 1;

 	/* Rev F is skipped */
 	if (offset >= 5)
 		offset = offset + 1;
 	snprintf(ep->version, TI_EEPROM_HDR_REV_LEN + 1, "%c.%d",
 		 'A' + offset, dra7_ep.version_minor);
 	ti_eeprom_string_cleanup(ep->version);
 	ep->emif1_size = (u64)dra7_ep.emif1_size;
 	ep->emif2_size = (u64)dra7_ep.emif2_size;
 	strlcpy(ep->config, dra7_ep.config, TI_EEPROM_HDR_CONFIG_LEN + 1);
 	ti_eeprom_string_cleanup(ep->config);

 	return 0;
 }

 bool __maybe_unused board_ti_is(char *name_tag)
 {
 	struct ti_common_eeprom *ep = TI_EEPROM_DATA;

 	if (ep->header == TI_DEAD_EEPROM_MAGIC)
 		return false;
 	return !strncmp(ep->name, name_tag, TI_EEPROM_HDR_NAME_LEN);
 }

 bool __maybe_unused board_ti_rev_is(char *rev_tag, int cmp_len)
 {
 	struct ti_common_eeprom *ep = TI_EEPROM_DATA;
 	int l;

 	if (ep->header == TI_DEAD_EEPROM_MAGIC)
 		return false;

 	l = cmp_len > TI_EEPROM_HDR_REV_LEN ? TI_EEPROM_HDR_REV_LEN : cmp_len;
 	return !strncmp(ep->version, rev_tag, l);
 }

 char * __maybe_unused board_ti_get_rev(void)
 {
 	struct ti_common_eeprom *ep = TI_EEPROM_DATA;

 	/* if ep->header == TI_DEAD_EEPROM_MAGIC, this is empty already */
 	return ep->version;
 }

 char * __maybe_unused board_ti_get_config(void)
 {
 	struct ti_common_eeprom *ep = TI_EEPROM_DATA;

 	/* if ep->header == TI_DEAD_EEPROM_MAGIC, this is empty already */
 	return ep->config;
 }

 char * __maybe_unused board_ti_get_name(void)
 {
 	struct ti_common_eeprom *ep = TI_EEPROM_DATA;

 	/* if ep->header == TI_DEAD_EEPROM_MAGIC, this is empty already */
 	return ep->name;
 }

 void __maybe_unused
 board_ti_get_eth_mac_addr(int index,
 			  u8 mac_addr[TI_EEPROM_HDR_ETH_ALEN])
 {
 	struct ti_common_eeprom *ep = TI_EEPROM_DATA;

 	if (ep->header == TI_DEAD_EEPROM_MAGIC)
 		goto fail;

 	if (index < 0 || index >= TI_EEPROM_HDR_NO_OF_MAC_ADDR)
 		goto fail;

 	memcpy(mac_addr, ep->mac_addr[index], TI_EEPROM_HDR_ETH_ALEN);
 	return;

 fail:
 	memset(mac_addr, 0, TI_EEPROM_HDR_ETH_ALEN);
 }

 u64 __maybe_unused board_ti_get_emif1_size(void)
 {
 	struct ti_common_eeprom *ep = TI_EEPROM_DATA;

 	if (ep->header != DRA7_EEPROM_HEADER_MAGIC)
 		return 0;

 	return ep->emif1_size;
 }

 u64 __maybe_unused board_ti_get_emif2_size(void)
 {
 	struct ti_common_eeprom *ep = TI_EEPROM_DATA;

 	if (ep->header != DRA7_EEPROM_HEADER_MAGIC)
 		return 0;

 	return ep->emif2_size;
 }

 void __maybe_unused set_board_info_env(char *name)
 {
 	char *unknown = "unknown";
 	struct ti_common_eeprom *ep = TI_EEPROM_DATA;

 	if (name)
 		env_set("board_name", name);
 	else if (ep->name)
 		env_set("board_name", ep->name);
 	else
 		env_set("board_name", unknown);

 	if (ep->version)
 		env_set("board_rev", ep->version);
 	else
 		env_set("board_rev", unknown);

 	if (ep->serial)
 		env_set("board_serial", ep->serial);
 	else
 		env_set("board_serial", unknown);
 }

 static u64 mac_to_u64(u8 mac[6])
 {
 	int i;
 	u64 addr = 0;

 	for (i = 0; i < 6; i++) {
 		addr <<= 8;
 		addr |= mac[i];
 	}

 	return addr;
 }

 static void u64_to_mac(u64 addr, u8 mac[6])
 {
 	mac[5] = addr;
 	mac[4] = addr >> 8;
 	mac[3] = addr >> 16;
 	mac[2] = addr >> 24;
 	mac[1] = addr >> 32;
 	mac[0] = addr >> 40;
 }

 void board_ti_set_ethaddr(int index)
 {
 	uint8_t mac_addr[6];
 	int i;
 	u64 mac1, mac2;
 	u8 mac_addr1[6], mac_addr2[6];
 	int num_macs;
 	/*
 	 * Export any Ethernet MAC addresses from EEPROM.
 	 * The 2 MAC addresses in EEPROM define the address range.
 	 */
 	board_ti_get_eth_mac_addr(0, mac_addr1);
 	board_ti_get_eth_mac_addr(1, mac_addr2);

 	if (is_valid_ethaddr(mac_addr1) && is_valid_ethaddr(mac_addr2)) {
 		mac1 = mac_to_u64(mac_addr1);
 		mac2 = mac_to_u64(mac_addr2);

 		/* must contain an address range */
 		num_macs = mac2 - mac1 + 1;
 		if (num_macs <= 0)
 			return;

 		if (num_macs > 50) {
 			printf("%s: Too many MAC addresses: %d. Limiting to 50\n",
 			       __func__, num_macs);
 			num_macs = 50;
 		}

 		for (i = 0; i < num_macs; i++) {
 			u64_to_mac(mac1 + i, mac_addr);
 			if (is_valid_ethaddr(mac_addr)) {
 				eth_env_set_enetaddr_by_index("eth", i + index,
 							      mac_addr);
 			}
 		}
 	}
 }

 bool __maybe_unused board_ti_was_eeprom_read(void)
 {
 	struct ti_common_eeprom *ep = TI_EEPROM_DATA;

 	if (ep->header == TI_EEPROM_HEADER_MAGIC)
 		return true;
 	else
 		return false;
 }
	// SPDX-License-Identifier: GPL-2.0+
	/*
	* Library to support early TI EVM EEPROM handling
	*
	* Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
	* Lokesh Vutla
	* Steve Kipisz
	*/

	#include <common.h>
	#include <asm/omap_common.h>
	#include <dm/uclass.h>
	#include <i2c.h>

	#include "board_detect.h"

	#if !defined(CONFIG_DM_I2C)
	/**
	* ti_i2c_eeprom_init - Initialize an i2c bus and probe for a device
	* @i2c_bus: i2c bus number to initialize
	* @dev_addr: Device address to probe for
	*
	* Return: 0 on success or corresponding error on failure.
	*/
	static int __maybe_unused ti_i2c_eeprom_init(int i2c_bus, int dev_addr)
	{
	int rc;

	if (i2c_bus >= 0) {
	rc = i2c_set_bus_num(i2c_bus);
	if (rc)
	return rc;
	}

	return i2c_probe(dev_addr);
	}

	/**
	* ti_i2c_eeprom_read - Read data from an EEPROM
	* @dev_addr: The device address of the EEPROM
	* @offset: Offset to start reading in the EEPROM
	* @ep: Pointer to a buffer to read into
	* @epsize: Size of buffer
	*
	* Return: 0 on success or corresponding result of i2c_read
	*/
	static int __maybe_unused ti_i2c_eeprom_read(int dev_addr, int offset,
	uchar *ep, int epsize)
	{
	return i2c_read(dev_addr, offset, 2, ep, epsize);
	}
	#endif

	/**
	* ti_eeprom_string_cleanup() - Handle eeprom programming errors
	* @s: eeprom string (should be NULL terminated)
	*
	* Some Board manufacturers do not add a NULL termination at the
	* end of string, instead some binary information is kludged in, hence
	* convert the string to just printable characters of ASCII chart.
	*/
	static void __maybe_unused ti_eeprom_string_cleanup(char *s)
	{
	int i, l;

	l = strlen(s);
	for (i = 0; i < l; i++, s++)
	if (s < ' ' \|\| s > '~') {
	*s = 0;
	break;
	}
	}

	__weak void gpi2c_init(void)
	{
	}

	static int __maybe_unused ti_i2c_eeprom_get(int bus_addr, int dev_addr,
	u32 header, u32 size, uint8_t *ep)
	{
	u32 hdr_read;
	int rc;

	#if defined(CONFIG_DM_I2C)
	struct udevice *dev;
	struct udevice *bus;

	rc = uclass_get_device_by_seq(UCLASS_I2C, bus_addr, &bus);
	if (rc)
	return rc;
	rc = i2c_get_chip(bus, dev_addr, 1, &dev);
	if (rc)
	return rc;

	/*
	* Read the header first then only read the other contents.
	*/
	rc = i2c_set_chip_offset_len(dev, 2);
	if (rc)
	return rc;

	rc = dm_i2c_read(dev, 0, (uint8_t *)&hdr_read, 4);
	if (rc)
	return rc;

	/* Corrupted data??? */
	if (hdr_read != header) {
	rc = dm_i2c_read(dev, 0, (uint8_t *)&hdr_read, 4);
	/*
	* read the eeprom header using i2c again, but use only a
	* 1 byte address (some legacy boards need this..)
	*/
	if (rc) {
	rc = i2c_set_chip_offset_len(dev, 1);
	if (rc)
	return rc;

	rc = dm_i2c_read(dev, 0, (uint8_t *)&hdr_read, 4);
	}
	if (rc)
	return rc;
	}
	if (hdr_read != header)
	return -1;

	rc = dm_i2c_read(dev, 0, ep, size);
	if (rc)
	return rc;
	#else
	u32 byte;

	gpi2c_init();
	rc = ti_i2c_eeprom_init(bus_addr, dev_addr);
	if (rc)
	return rc;

	/*
	* Read the header first then only read the other contents.
	*/
	byte = 2;

	rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read, 4);
	if (rc)
	return rc;

	/* Corrupted data??? */
	if (hdr_read != header) {
	rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read, 4);
	/*
	* read the eeprom header using i2c again, but use only a
	* 1 byte address (some legacy boards need this..)
	*/
	byte = 1;
	if (rc) {
	rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read,
	4);
	}
	if (rc)
	return rc;
	}
	if (hdr_read != header)
	return -1;

	rc = i2c_read(dev_addr, 0x0, byte, ep, size);
	if (rc)
	return rc;
	#endif
	return 0;
	}

	int __maybe_unused ti_i2c_eeprom_am_set(const char name, const char rev)
	{
	struct ti_common_eeprom *ep;

	if (!name \|\| !rev)
	return -1;

	ep = TI_EEPROM_DATA;
	if (ep->header == TI_EEPROM_HEADER_MAGIC)
	goto already_set;

	/* Set to 0 all fields */
	memset(ep, 0, sizeof(*ep));
	strncpy(ep->name, name, TI_EEPROM_HDR_NAME_LEN);
	strncpy(ep->version, rev, TI_EEPROM_HDR_REV_LEN);
	/* Some dummy serial number to identify the platform */
	strncpy(ep->serial, "0000", TI_EEPROM_HDR_SERIAL_LEN);
	/* Mark it with a valid header */
	ep->header = TI_EEPROM_HEADER_MAGIC;

	already_set:
	return 0;
	}

	int __maybe_unused ti_i2c_eeprom_am_get(int bus_addr, int dev_addr)
	{
	int rc;
	struct ti_am_eeprom am_ep;
	struct ti_common_eeprom *ep;

	ep = TI_EEPROM_DATA;
	#ifndef CONFIG_SPL_BUILD
	if (ep->header == TI_EEPROM_HEADER_MAGIC)
	return 0; /* EEPROM has already been read */
	#endif

	/* Initialize with a known bad marker for i2c fails.. */
	ep->header = TI_DEAD_EEPROM_MAGIC;
	ep->name[0] = 0x0;
	ep->version[0] = 0x0;
	ep->serial[0] = 0x0;
	ep->config[0] = 0x0;

	rc = ti_i2c_eeprom_get(bus_addr, dev_addr, TI_EEPROM_HEADER_MAGIC,
	sizeof(am_ep), (uint8_t *)&am_ep);
	if (rc)
	return rc;

	ep->header = am_ep.header;
	strlcpy(ep->name, am_ep.name, TI_EEPROM_HDR_NAME_LEN + 1);
	ti_eeprom_string_cleanup(ep->name);

	/* BeagleBone Green '1' eeprom, board_rev: 0x1a 0x00 0x00 0x00 */
	if (am_ep.version[0] == 0x1a && am_ep.version[1] == 0x00 &&
	am_ep.version[2] == 0x00 && am_ep.version[3] == 0x00)
	strlcpy(ep->version, "BBG1", TI_EEPROM_HDR_REV_LEN + 1);
	else
	strlcpy(ep->version, am_ep.version, TI_EEPROM_HDR_REV_LEN + 1);
	ti_eeprom_string_cleanup(ep->version);
	strlcpy(ep->serial, am_ep.serial, TI_EEPROM_HDR_SERIAL_LEN + 1);
	ti_eeprom_string_cleanup(ep->serial);
	strlcpy(ep->config, am_ep.config, TI_EEPROM_HDR_CONFIG_LEN + 1);
	ti_eeprom_string_cleanup(ep->config);

	memcpy(ep->mac_addr, am_ep.mac_addr,
	TI_EEPROM_HDR_NO_OF_MAC_ADDR * TI_EEPROM_HDR_ETH_ALEN);

	return 0;
	}

	int __maybe_unused ti_i2c_eeprom_dra7_get(int bus_addr, int dev_addr)
	{
	int rc, offset = 0;
	struct dra7_eeprom dra7_ep;
	struct ti_common_eeprom *ep;

	ep = TI_EEPROM_DATA;
	#ifndef CONFIG_SPL_BUILD
	if (ep->header == DRA7_EEPROM_HEADER_MAGIC)
	return 0; /* EEPROM has already been read */
	#endif

	/* Initialize with a known bad marker for i2c fails.. */
	ep->header = TI_DEAD_EEPROM_MAGIC;
	ep->name[0] = 0x0;
	ep->version[0] = 0x0;
	ep->serial[0] = 0x0;
	ep->config[0] = 0x0;
	ep->emif1_size = 0;
	ep->emif2_size = 0;

	rc = ti_i2c_eeprom_get(bus_addr, dev_addr, DRA7_EEPROM_HEADER_MAGIC,
	sizeof(dra7_ep), (uint8_t *)&dra7_ep);
	if (rc)
	return rc;

	ep->header = dra7_ep.header;
	strlcpy(ep->name, dra7_ep.name, TI_EEPROM_HDR_NAME_LEN + 1);
	ti_eeprom_string_cleanup(ep->name);

	offset = dra7_ep.version_major - 1;

	/* Rev F is skipped */
	if (offset >= 5)
	offset = offset + 1;
	snprintf(ep->version, TI_EEPROM_HDR_REV_LEN + 1, "%c.%d",
	'A' + offset, dra7_ep.version_minor);
	ti_eeprom_string_cleanup(ep->version);
	ep->emif1_size = (u64)dra7_ep.emif1_size;
	ep->emif2_size = (u64)dra7_ep.emif2_size;
	strlcpy(ep->config, dra7_ep.config, TI_EEPROM_HDR_CONFIG_LEN + 1);
	ti_eeprom_string_cleanup(ep->config);

	return 0;
	}

	bool __maybe_unused board_ti_is(char *name_tag)
	{
	struct ti_common_eeprom *ep = TI_EEPROM_DATA;

	if (ep->header == TI_DEAD_EEPROM_MAGIC)
	return false;
	return !strncmp(ep->name, name_tag, TI_EEPROM_HDR_NAME_LEN);
	}

	bool __maybe_unused board_ti_rev_is(char *rev_tag, int cmp_len)
	{
	struct ti_common_eeprom *ep = TI_EEPROM_DATA;
	int l;

	if (ep->header == TI_DEAD_EEPROM_MAGIC)
	return false;

	l = cmp_len > TI_EEPROM_HDR_REV_LEN ? TI_EEPROM_HDR_REV_LEN : cmp_len;
	return !strncmp(ep->version, rev_tag, l);
	}

	char * __maybe_unused board_ti_get_rev(void)
	{
	struct ti_common_eeprom *ep = TI_EEPROM_DATA;

	/* if ep->header == TI_DEAD_EEPROM_MAGIC, this is empty already */
	return ep->version;
	}

	char * __maybe_unused board_ti_get_config(void)
	{
	struct ti_common_eeprom *ep = TI_EEPROM_DATA;

	/* if ep->header == TI_DEAD_EEPROM_MAGIC, this is empty already */
	return ep->config;
	}

	char * __maybe_unused board_ti_get_name(void)
	{
	struct ti_common_eeprom *ep = TI_EEPROM_DATA;

	/* if ep->header == TI_DEAD_EEPROM_MAGIC, this is empty already */
	return ep->name;
	}

	void __maybe_unused
	board_ti_get_eth_mac_addr(int index,
	u8 mac_addr[TI_EEPROM_HDR_ETH_ALEN])
	{
	struct ti_common_eeprom *ep = TI_EEPROM_DATA;

	if (ep->header == TI_DEAD_EEPROM_MAGIC)
	goto fail;

	if (index < 0 \|\| index >= TI_EEPROM_HDR_NO_OF_MAC_ADDR)
	goto fail;

	memcpy(mac_addr, ep->mac_addr[index], TI_EEPROM_HDR_ETH_ALEN);
	return;

	fail:
	memset(mac_addr, 0, TI_EEPROM_HDR_ETH_ALEN);
	}

	u64 __maybe_unused board_ti_get_emif1_size(void)
	{
	struct ti_common_eeprom *ep = TI_EEPROM_DATA;

	if (ep->header != DRA7_EEPROM_HEADER_MAGIC)
	return 0;

	return ep->emif1_size;
	}

	u64 __maybe_unused board_ti_get_emif2_size(void)
	{
	struct ti_common_eeprom *ep = TI_EEPROM_DATA;

	if (ep->header != DRA7_EEPROM_HEADER_MAGIC)
	return 0;

	return ep->emif2_size;
	}

	void __maybe_unused set_board_info_env(char *name)
	{
	char *unknown = "unknown";
	struct ti_common_eeprom *ep = TI_EEPROM_DATA;

	if (name)
	env_set("board_name", name);
	else if (ep->name)
	env_set("board_name", ep->name);
	else
	env_set("board_name", unknown);

	if (ep->version)
	env_set("board_rev", ep->version);
	else
	env_set("board_rev", unknown);

	if (ep->serial)
	env_set("board_serial", ep->serial);
	else
	env_set("board_serial", unknown);
	}

	static u64 mac_to_u64(u8 mac[6])
	{
	int i;
	u64 addr = 0;

	for (i = 0; i < 6; i++) {
	addr <<= 8;
	addr \|= mac[i];
	}

	return addr;
	}

	static void u64_to_mac(u64 addr, u8 mac[6])
	{
	mac[5] = addr;
	mac[4] = addr >> 8;
	mac[3] = addr >> 16;
	mac[2] = addr >> 24;
	mac[1] = addr >> 32;
	mac[0] = addr >> 40;
	}

	void board_ti_set_ethaddr(int index)
	{
	uint8_t mac_addr[6];
	int i;
	u64 mac1, mac2;
	u8 mac_addr1[6], mac_addr2[6];
	int num_macs;
	/*
	* Export any Ethernet MAC addresses from EEPROM.
	* The 2 MAC addresses in EEPROM define the address range.
	*/
	board_ti_get_eth_mac_addr(0, mac_addr1);
	board_ti_get_eth_mac_addr(1, mac_addr2);

	if (is_valid_ethaddr(mac_addr1) && is_valid_ethaddr(mac_addr2)) {
	mac1 = mac_to_u64(mac_addr1);
	mac2 = mac_to_u64(mac_addr2);

	/* must contain an address range */
	num_macs = mac2 - mac1 + 1;
	if (num_macs <= 0)
	return;

	if (num_macs > 50) {
	printf("%s: Too many MAC addresses: %d. Limiting to 50\n",
	__func__, num_macs);
	num_macs = 50;
	}

	for (i = 0; i < num_macs; i++) {
	u64_to_mac(mac1 + i, mac_addr);
	if (is_valid_ethaddr(mac_addr)) {
	eth_env_set_enetaddr_by_index("eth", i + index,
	mac_addr);
	}
	}
	}
	}

	bool __maybe_unused board_ti_was_eeprom_read(void)
	{
	struct ti_common_eeprom *ep = TI_EEPROM_DATA;

	if (ep->header == TI_EEPROM_HEADER_MAGIC)
	return true;
	else
	return false;
	}