| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Meson GXL Internal PHY Driver |
| * |
| * Copyright (C) 2015 Amlogic, Inc. All rights reserved. |
| * Copyright (C) 2016 BayLibre, SAS. All rights reserved. |
| * Author: Neil Armstrong <narmstrong@baylibre.com> |
| */ |
| #include <config.h> |
| #include <common.h> |
| #include <linux/bitops.h> |
| #include <dm.h> |
| #include <phy.h> |
| |
| /* This function is provided to cope with the possible failures of this phy |
| * during aneg process. When aneg fails, the PHY reports that aneg is done |
| * but the value found in MII_LPA is wrong: |
| * - Early failures: MII_LPA is just 0x0001. if MII_EXPANSION reports that |
| * the link partner (LP) supports aneg but the LP never acked our base |
| * code word, it is likely that we never sent it to begin with. |
| * - Late failures: MII_LPA is filled with a value which seems to make sense |
| * but it actually is not what the LP is advertising. It seems that we |
| * can detect this using a magic bit in the WOL bank (reg 12 - bit 12). |
| * If this particular bit is not set when aneg is reported being done, |
| * it means MII_LPA is likely to be wrong. |
| * |
| * In both case, forcing a restart of the aneg process solve the problem. |
| * When this failure happens, the first retry is usually successful but, |
| * in some cases, it may take up to 6 retries to get a decent result |
| */ |
| int meson_gxl_startup(struct phy_device *phydev) |
| { |
| unsigned int retries = 10; |
| int ret, wol, lpa, exp; |
| |
| restart_aneg: |
| ret = genphy_update_link(phydev); |
| if (ret) |
| return ret; |
| |
| if (phydev->autoneg == AUTONEG_ENABLE) { |
| /* Need to access WOL bank, make sure the access is open */ |
| ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x14, 0x0000); |
| if (ret) |
| return ret; |
| ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x14, 0x0400); |
| if (ret) |
| return ret; |
| ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x14, 0x0000); |
| if (ret) |
| return ret; |
| ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x14, 0x0400); |
| if (ret) |
| return ret; |
| |
| /* Request LPI_STATUS WOL register */ |
| ret = phy_write(phydev, MDIO_DEVAD_NONE, 0x14, 0x8D80); |
| if (ret) |
| return ret; |
| |
| /* Read LPI_STATUS value */ |
| wol = phy_read(phydev, MDIO_DEVAD_NONE, 0x15); |
| if (wol < 0) |
| return wol; |
| |
| lpa = phy_read(phydev, MDIO_DEVAD_NONE, MII_LPA); |
| if (lpa < 0) |
| return lpa; |
| |
| exp = phy_read(phydev, MDIO_DEVAD_NONE, MII_EXPANSION); |
| if (exp < 0) |
| return exp; |
| |
| if (!(wol & BIT(12)) || |
| ((exp & EXPANSION_NWAY) && !(lpa & LPA_LPACK))) { |
| |
| /* Looks like aneg failed after all */ |
| if (!retries) { |
| printf("%s LPA corruption max attempts\n", |
| phydev->dev->name); |
| return -ETIMEDOUT; |
| } |
| |
| printf("%s LPA corruption - aneg restart\n", |
| phydev->dev->name); |
| |
| ret = genphy_restart_aneg(phydev); |
| if (ret) |
| return ret; |
| |
| --retries; |
| |
| goto restart_aneg; |
| } |
| } |
| |
| return genphy_parse_link(phydev); |
| } |
| |
| static int meson_gxl_phy_config(struct phy_device *phydev) |
| { |
| /* Enable Analog and DSP register Bank access by */ |
| phy_write(phydev, MDIO_DEVAD_NONE, 0x14, 0x0000); |
| phy_write(phydev, MDIO_DEVAD_NONE, 0x14, 0x0400); |
| phy_write(phydev, MDIO_DEVAD_NONE, 0x14, 0x0000); |
| phy_write(phydev, MDIO_DEVAD_NONE, 0x14, 0x0400); |
| |
| /* Write Analog register 23 */ |
| phy_write(phydev, MDIO_DEVAD_NONE, 0x17, 0x8E0D); |
| phy_write(phydev, MDIO_DEVAD_NONE, 0x14, 0x4417); |
| |
| /* Enable fractional PLL */ |
| phy_write(phydev, MDIO_DEVAD_NONE, 0x17, 0x0005); |
| phy_write(phydev, MDIO_DEVAD_NONE, 0x14, 0x5C1B); |
| |
| /* Program fraction FR_PLL_DIV1 */ |
| phy_write(phydev, MDIO_DEVAD_NONE, 0x17, 0x029A); |
| phy_write(phydev, MDIO_DEVAD_NONE, 0x14, 0x5C1D); |
| |
| /* Program fraction FR_PLL_DIV1 */ |
| phy_write(phydev, MDIO_DEVAD_NONE, 0x17, 0xAAAA); |
| phy_write(phydev, MDIO_DEVAD_NONE, 0x14, 0x5C1C); |
| |
| return genphy_config(phydev); |
| } |
| |
| static struct phy_driver meson_gxl_phy_driver = { |
| .name = "Meson GXL Internal PHY", |
| .uid = 0x01814400, |
| .mask = 0xfffffff0, |
| .features = PHY_BASIC_FEATURES, |
| .config = &meson_gxl_phy_config, |
| .startup = &meson_gxl_startup, |
| .shutdown = &genphy_shutdown, |
| }; |
| |
| int phy_meson_gxl_init(void) |
| { |
| phy_register(&meson_gxl_phy_driver); |
| |
| return 0; |
| } |