| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2016-2018 Intel Corporation <www.intel.com> |
| * |
| */ |
| |
| #include <altera.h> |
| #include <common.h> |
| #include <errno.h> |
| #include <fdtdec.h> |
| #include <miiphy.h> |
| #include <netdev.h> |
| #include <asm/io.h> |
| #include <asm/arch/reset_manager.h> |
| #include <asm/arch/system_manager.h> |
| #include <asm/arch/misc.h> |
| #include <asm/pl310.h> |
| #include <linux/libfdt.h> |
| |
| #include <dt-bindings/reset/altr,rst-mgr-s10.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| static struct socfpga_system_manager *sysmgr_regs = |
| (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS; |
| |
| /* |
| * FPGA programming support for SoC FPGA Stratix 10 |
| */ |
| static Altera_desc altera_fpga[] = { |
| { |
| /* Family */ |
| Intel_FPGA_Stratix10, |
| /* Interface type */ |
| secure_device_manager_mailbox, |
| /* No limitation as additional data will be ignored */ |
| -1, |
| /* No device function table */ |
| NULL, |
| /* Base interface address specified in driver */ |
| NULL, |
| /* No cookie implementation */ |
| 0 |
| }, |
| }; |
| |
| /* |
| * DesignWare Ethernet initialization |
| */ |
| #ifdef CONFIG_ETH_DESIGNWARE |
| |
| static u32 socfpga_phymode_setup(u32 gmac_index, const char *phymode) |
| { |
| u32 modereg; |
| |
| if (!phymode) |
| return -EINVAL; |
| |
| if (!strcmp(phymode, "mii") || !strcmp(phymode, "gmii") || |
| !strcmp(phymode, "sgmii")) |
| modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII; |
| else if (!strcmp(phymode, "rgmii")) |
| modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII; |
| else if (!strcmp(phymode, "rmii")) |
| modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII; |
| else |
| return -EINVAL; |
| |
| clrsetbits_le32(&sysmgr_regs->emac0 + gmac_index, |
| SYSMGR_EMACGRP_CTRL_PHYSEL_MASK, |
| modereg); |
| |
| return 0; |
| } |
| |
| static int socfpga_set_phymode(void) |
| { |
| const void *fdt = gd->fdt_blob; |
| struct fdtdec_phandle_args args; |
| const char *phy_mode; |
| u32 gmac_index; |
| int nodes[3]; /* Max. 3 GMACs */ |
| int ret, count; |
| int i, node; |
| |
| count = fdtdec_find_aliases_for_id(fdt, "ethernet", |
| COMPAT_ALTERA_SOCFPGA_DWMAC, |
| nodes, ARRAY_SIZE(nodes)); |
| for (i = 0; i < count; i++) { |
| node = nodes[i]; |
| if (node <= 0) |
| continue; |
| |
| ret = fdtdec_parse_phandle_with_args(fdt, node, "resets", |
| "#reset-cells", 1, 0, |
| &args); |
| if (ret || args.args_count != 1) { |
| debug("GMAC%i: Failed to parse DT 'resets'!\n", i); |
| continue; |
| } |
| |
| gmac_index = args.args[0] - EMAC0_RESET; |
| |
| phy_mode = fdt_getprop(fdt, node, "phy-mode", NULL); |
| ret = socfpga_phymode_setup(gmac_index, phy_mode); |
| if (ret) { |
| debug("GMAC%i: Failed to parse DT 'phy-mode'!\n", i); |
| continue; |
| } |
| } |
| |
| return 0; |
| } |
| #else |
| static int socfpga_set_phymode(void) |
| { |
| return 0; |
| }; |
| #endif |
| |
| /* |
| * Print CPU information |
| */ |
| #if defined(CONFIG_DISPLAY_CPUINFO) |
| int print_cpuinfo(void) |
| { |
| puts("CPU: Intel FPGA SoCFPGA Platform (ARMv8 64bit Cortex-A53)\n"); |
| |
| return 0; |
| } |
| #endif |
| |
| #ifdef CONFIG_ARCH_MISC_INIT |
| int arch_misc_init(void) |
| { |
| char qspi_string[13]; |
| |
| sprintf(qspi_string, "<0x%08x>", cm_get_qspi_controller_clk_hz()); |
| env_set("qspi_clock", qspi_string); |
| |
| socfpga_set_phymode(); |
| return 0; |
| } |
| #endif |
| |
| int arch_early_init_r(void) |
| { |
| socfpga_fpga_add(&altera_fpga[0]); |
| |
| return 0; |
| } |
| |
| void do_bridge_reset(int enable) |
| { |
| socfpga_bridges_reset(enable); |
| } |