blob: 3757ba26ac264841024d662d2978569ae6353397 [file] [log] [blame]
/*
* Copyright (C) 2016 The Android Open Source Project
*
* Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use, copy,
* modify, merge, publish, distribute, sublicense, and/or sell copies
* of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#if !defined(AVB_INSIDE_LIBAVB_AB_H) && !defined(AVB_COMPILATION)
#error \
"Never include this file directly, include libavb_ab/libavb_ab.h instead."
#endif
#ifndef AVB_AB_FLOW_H_
#define AVB_AB_FLOW_H_
#include "avb_ab_ops.h"
#ifdef __cplusplus
extern "C" {
#endif
/* Magic for the A/B struct when serialized. */
#define AVB_AB_MAGIC "\0AB0"
#define AVB_AB_MAGIC_LEN 4
/* Versioning for the on-disk A/B metadata - keep in sync with avbtool. */
#define AVB_AB_MAJOR_VERSION 1
#define AVB_AB_MINOR_VERSION 0
/* Size of AvbABData struct. */
#define AVB_AB_DATA_SIZE 32
/* Maximum values for slot data */
#define AVB_AB_MAX_PRIORITY 15
#define AVB_AB_MAX_TRIES_REMAINING 7
/* Struct used for recording per-slot metadata.
*
* When serialized, data is stored in network byte-order.
*/
typedef struct AvbABSlotData {
/* Slot priority. Valid values range from 0 to AVB_AB_MAX_PRIORITY,
* both inclusive with 1 being the lowest and AVB_AB_MAX_PRIORITY
* being the highest. The special value 0 is used to indicate the
* slot is unbootable.
*/
uint8_t priority;
/* Number of times left attempting to boot this slot ranging from 0
* to AVB_AB_MAX_TRIES_REMAINING.
*/
uint8_t tries_remaining;
/* Non-zero if this slot has booted successfully, 0 otherwise. */
uint8_t successful_boot;
/* Reserved for future use. */
uint8_t bootloader_verified;
} AVB_ATTR_PACKED AvbABSlotData;
/* Struct used for recording A/B metadata.
*
* When serialized, data is stored in network byte-order.
*/
typedef struct AvbABData {
/* Magic number used for identification - see AVB_AB_MAGIC. */
uint8_t magic[AVB_AB_MAGIC_LEN];
/* Version of on-disk struct - see AVB_AB_{MAJOR,MINOR}_VERSION. */
uint8_t version_major;
uint8_t version_minor;
/* Padding to ensure |slots| field start eight bytes in. */
uint8_t reserved1[2];
/* Per-slot metadata. */
AvbABSlotData slots[2];
/* Reserved for future use. */
uint8_t reserved2[12];
/* CRC32 of all 28 bytes preceding this field. */
uint32_t crc32;
} AVB_ATTR_PACKED AvbABData;
/* Copies |src| to |dest|, byte-swapping fields in the
* process. Returns false if the data is invalid (e.g. wrong magic,
* wrong CRC32 etc.), true otherwise.
*/
bool avb_ab_data_verify_and_byteswap(const AvbABData* src, AvbABData* dest);
/* Copies |src| to |dest|, byte-swapping fields in the process. Also
* updates the |crc32| field in |dest|.
*/
void avb_ab_data_update_crc_and_byteswap(const AvbABData* src, AvbABData* dest);
/* Initializes |data| such that it has two slots and both slots have
* maximum tries remaining. The CRC is not set.
*/
void avb_ab_data_init(AvbABData* data);
/* Reads A/B metadata from the 'misc' partition using |ops|. Returned
* data is properly byteswapped. Returns AVB_IO_RESULT_OK on
* success, error code otherwise.
*
* If the data read from disk is invalid (e.g. wrong magic or CRC
* checksum failure), the metadata will be reset using
* avb_ab_data_init() and then written to disk.
*/
AvbIOResult avb_ab_data_read(AvbABOps* ab_ops, AvbABData* data);
/* Writes A/B metadata to the 'misc' partition using |ops|. This will
* byteswap and update the CRC as needed. Returns AVB_IO_RESULT_OK on
* success, error code otherwise.
*/
AvbIOResult avb_ab_data_write(AvbABOps* ab_ops, const AvbABData* data);
/* Return codes used in avb_ab_flow(), see that function for
* documentation of each value.
*/
typedef enum {
AVB_AB_FLOW_RESULT_OK,
AVB_AB_FLOW_RESULT_OK_WITH_VERIFICATION_ERROR,
AVB_AB_FLOW_RESULT_ERROR_OOM,
AVB_AB_FLOW_RESULT_ERROR_IO,
AVB_AB_FLOW_RESULT_ERROR_NO_BOOTABLE_SLOTS,
AVB_AB_FLOW_RESULT_ERROR_INVALID_ARGUMENT
} AvbABFlowResult;
/* Get a textual representation of |result|. */
const char* avb_ab_flow_result_to_string(AvbABFlowResult result);
/* High-level function to select a slot to boot. The following
* algorithm is used:
*
* 1. A/B metadata is loaded and validated using the
* read_ab_metadata() operation. Typically this means it's read from
* the 'misc' partition and if it's invalid then it's reset using
* avb_ab_data_init() and this reset metadata is returned.
*
* 2. All bootable slots listed in the A/B metadata are verified using
* avb_slot_verify(). If a slot is invalid or if it fails verification
* (and AVB_SLOT_VERIFY_FLAGS_ALLOW_VERIFICATION_ERROR is not set, see
* below), it will be marked as unbootable in the A/B metadata and the
* metadata will be saved to disk before returning.
*
* 3. If there are no bootable slots, the value
* AVB_AB_FLOW_RESULT_ERROR_NO_BOOTABLE_SLOTS is returned.
*
* 4. For each bootable slot, the Stored Rollback Indexes are updated
* such that for each rollback index location, the Stored Rollback
* Index is the largest number smaller than or equal to the Rollback
* Index of each slot.
*
* 5. The bootable slot with the highest priority is selected and
* returned in |out_data|. If this slot is already marked as
* successful, the A/B metadata is not modified. However, if the slot
* is not marked as bootable its |tries_remaining| count is
* decremented and the A/B metadata is saved to disk before returning.
* In either case the value AVB_AB_FLOW_RESULT_OK is returning.
*
* The partitions to load is given in |requested_partitions| as a
* NULL-terminated array of NUL-terminated strings. Typically the
* |requested_partitions| array only contains a single item for the
* boot partition, 'boot'.
*
* If the device is unlocked (and _only_ if it's unlocked), the
* AVB_SLOT_VERIFY_FLAGS_ALLOW_VERIFICATION_ERROR flag should be set
* in the |flags| parameter. This will allow considering slots as
* verified even when avb_slot_verify() returns
* AVB_SLOT_VERIFY_RESULT_ERROR_PUBLIC_KEY_REJECTED,
* AVB_SLOT_VERIFY_RESULT_ERROR_VERIFICATION, or
* AVB_SLOT_VERIFY_RESULT_ERROR_ROLLBACK_INDEX for the slot in
* question.
*
* Note that neither androidboot.slot_suffix nor androidboot.slot are
* set in the |cmdline| field in |AvbSlotVerifyData| - you will have
* to pass these yourself.
*
* If a slot was selected and it verified then AVB_AB_FLOW_RESULT_OK
* is returned.
*
* If a slot was selected but it didn't verify then
* AVB_AB_FLOW_RESULT_OK_WITH_VERIFICATION_ERROR is returned. This can
* only happen when the AVB_SLOT_VERIFY_FLAGS_ALLOW_VERIFICATION_ERROR
* flag is set.
*
* If an I/O operation - such as loading/saving metadata or checking
* rollback indexes - fail, the value AVB_AB_FLOW_RESULT_ERROR_IO is
* returned.
*
* If memory allocation fails, AVB_AB_FLOW_RESULT_ERROR_OOM is
* returned.
*
* If invalid arguments are passed,
* AVB_AB_FLOW_RESULT_ERROR_INVALID_ARGUMENT is returned. For example
* this can happen if using AVB_HASHTREE_ERROR_MODE_LOGGING without
* AVB_SLOT_VERIFY_FLAGS_ALLOW_VERIFICATION_ERROR.
*
* Reasonable behavior for handling AVB_AB_FLOW_RESULT_ERROR_NO_BOOTABLE_SLOTS
* is to initiate device repair (which is device-dependent).
*/
AvbABFlowResult avb_ab_flow(AvbABOps* ab_ops,
const char* const* requested_partitions,
AvbSlotVerifyFlags flags,
AvbHashtreeErrorMode hashtree_error_mode,
AvbSlotVerifyData** out_data);
/* Marks the slot with the given slot number as active. Returns
* AVB_IO_RESULT_OK on success, error code otherwise.
*
* This function is typically used by the OS updater when completing
* an update. It can also used by the firmware for implementing the
* "set_active" command.
*/
AvbIOResult avb_ab_mark_slot_active(AvbABOps* ab_ops, unsigned int slot_number);
/* Marks the slot with the given slot number as unbootable. Returns
* AVB_IO_RESULT_OK on success, error code otherwise.
*
* This function is typically used by the OS updater before writing to
* a slot.
*/
AvbIOResult avb_ab_mark_slot_unbootable(AvbABOps* ab_ops,
unsigned int slot_number);
/* Marks the slot with the given slot number as having booted
* successfully. Returns AVB_IO_RESULT_OK on success, error code
* otherwise.
*
* Calling this on an unbootable slot is an error - AVB_IO_RESULT_OK
* will be returned yet the function will have no side-effects.
*
* This function is typically used by the OS updater after having
* confirmed that the slot works as intended.
*/
AvbIOResult avb_ab_mark_slot_successful(AvbABOps* ab_ops,
unsigned int slot_number);
#ifdef __cplusplus
}
#endif
#endif /* AVB_AB_FLOW_H_ */