| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * (C) Copyright 2018 |
| * Mario Six, Guntermann & Drunck GmbH, mario.six@gdsys.cc |
| */ |
| |
| #ifndef __GDSYS_IOEP_H_ |
| #define __GDSYS_IOEP_H_ |
| |
| /** |
| * struct io_generic_packet - header structure for GDSYS IOEP packets |
| * @target_address: Target protocol address of the packet. |
| * @source_address: Source protocol address of the packet. |
| * @packet_type: Packet type. |
| * @bc: Block counter (filled in by FPGA). |
| * @packet_length: Length of the packet's payload bytes. |
| */ |
| struct io_generic_packet { |
| u16 target_address; |
| u16 source_address; |
| u8 packet_type; |
| u8 bc; |
| u16 packet_length; |
| } __attribute__((__packed__)); |
| |
| /** |
| * struct gdsys_ioep_regs - Registers of a IOEP device |
| * @transmit_data: Register that receives data to be sent |
| * @tx_control: TX control register |
| * @receive_data: Register filled with the received data |
| * @rx_tx_status: RX/TX status register |
| * @device_address: Register for setting/reading the device's address |
| * @target_address: Register for setting/reading the remote endpoint's address |
| * @int_enable: Interrupt/Interrupt enable register |
| */ |
| struct gdsys_ioep_regs { |
| u16 transmit_data; |
| u16 tx_control; |
| u16 receive_data; |
| u16 rx_tx_status; |
| u16 device_address; |
| u16 target_address; |
| u16 int_enable; |
| }; |
| |
| /** |
| * gdsys_ioep_set() - Convenience macro to write registers of a IOEP device |
| * @map: Register map to write the value in |
| * @member: Name of the member in the gdsys_ioep_regs structure to write |
| * @val: Value to write to the register |
| */ |
| #define gdsys_ioep_set(map, member, val) \ |
| regmap_set(map, struct gdsys_ioep_regs, member, val) |
| |
| /** |
| * gdsys_ioep_get() - Convenience macro to read registers of a IOEP device |
| * @map: Register map to read the value from |
| * @member: Name of the member in the gdsys_ioep_regs structure to read |
| * @valp: Pointer to buffer to read the register value into |
| */ |
| #define gdsys_ioep_get(map, member, valp) \ |
| regmap_get(map, struct gdsys_ioep_regs, member, valp) |
| |
| /** |
| * enum rx_tx_status_values - Enum to describe the fields of the rx_tx_status |
| * register |
| * @STATE_TX_PACKET_BUILDING: The device is currently building a packet |
| * (and accepting data for it) |
| * @STATE_TX_TRANSMITTING: A packet is currenly being transmitted |
| * @STATE_TX_BUFFER_FULL: The TX buffer is full |
| * @STATE_TX_ERR: A TX error occurred |
| * @STATE_RECEIVE_TIMEOUT: A receive timeout occurred |
| * @STATE_PROC_RX_STORE_TIMEOUT: A RX store timeout for a processor packet |
| * occurred |
| * @STATE_PROC_RX_RECEIVE_TIMEOUT: A RX receive timeout for a processor packet |
| * occurred |
| * @STATE_RX_DIST_ERR: A error occurred in the distribution block |
| * @STATE_RX_LENGTH_ERR: A length invalid error occurred |
| * @STATE_RX_FRAME_CTR_ERR: A frame count error occurred (two |
| * non-increasing frame count numbers |
| * encountered) |
| * @STATE_RX_FCS_ERR: A CRC error occurred |
| * @STATE_RX_PACKET_DROPPED: A RX packet has been dropped |
| * @STATE_RX_DATA_LAST: The data to be read is the final data of the |
| * current packet |
| * @STATE_RX_DATA_FIRST: The data to be read is the first data of the |
| * current packet |
| * @STATE_RX_DATA_AVAILABLE: RX data is available to be read |
| */ |
| enum rx_tx_status_values { |
| STATE_TX_PACKET_BUILDING = BIT(0), |
| STATE_TX_TRANSMITTING = BIT(1), |
| STATE_TX_BUFFER_FULL = BIT(2), |
| STATE_TX_ERR = BIT(3), |
| STATE_RECEIVE_TIMEOUT = BIT(4), |
| STATE_PROC_RX_STORE_TIMEOUT = BIT(5), |
| STATE_PROC_RX_RECEIVE_TIMEOUT = BIT(6), |
| STATE_RX_DIST_ERR = BIT(7), |
| STATE_RX_LENGTH_ERR = BIT(8), |
| STATE_RX_FRAME_CTR_ERR = BIT(9), |
| STATE_RX_FCS_ERR = BIT(10), |
| STATE_RX_PACKET_DROPPED = BIT(11), |
| STATE_RX_DATA_LAST = BIT(12), |
| STATE_RX_DATA_FIRST = BIT(13), |
| STATE_RX_DATA_AVAILABLE = BIT(15), |
| }; |
| |
| /** |
| * enum tx_control_values - Enum to describe the fields of the tx_control |
| * register |
| * @CTRL_PROC_RECEIVE_ENABLE: Enable packet reception for the processor |
| * @CTRL_FLUSH_TRANSMIT_BUFFER: Flush the transmit buffer (and send packet data) |
| */ |
| enum tx_control_values { |
| CTRL_PROC_RECEIVE_ENABLE = BIT(12), |
| CTRL_FLUSH_TRANSMIT_BUFFER = BIT(15), |
| }; |
| |
| /** |
| * enum int_enable_values - Enum to describe the fields of the int_enable |
| * register |
| * @IRQ_CPU_TRANSMITBUFFER_FREE_STATUS: The transmit buffer is free (packet |
| * data can be transmitted to the |
| * device) |
| * @IRQ_CPU_PACKET_TRANSMITTED_EVENT: A packet has been transmitted |
| * @IRQ_NEW_CPU_PACKET_RECEIVED_EVENT: A new packet has been received |
| * @IRQ_CPU_RECEIVE_DATA_AVAILABLE_STATUS: RX packet data are available to be |
| * read |
| */ |
| enum int_enable_values { |
| IRQ_CPU_TRANSMITBUFFER_FREE_STATUS = BIT(5), |
| IRQ_CPU_PACKET_TRANSMITTED_EVENT = BIT(6), |
| IRQ_NEW_CPU_PACKET_RECEIVED_EVENT = BIT(7), |
| IRQ_CPU_RECEIVE_DATA_AVAILABLE_STATUS = BIT(8), |
| }; |
| |
| #endif /* __GDSYS_IOEP_H_ */ |
