blob: c3c2328dcd2094609417cae7b743446d5bf8cf46 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2006-2009 Freescale Semiconductor, Inc.
*/
#include <common.h>
#include <asm/mmu.h>
#include <asm/io.h>
#include <mpc83xx.h>
#include <pci.h>
#include <i2c.h>
#include <asm/fsl_i2c.h>
static struct pci_region pci1_regions[] = {
{
bus_start: CONFIG_SYS_PCI1_MEM_BASE,
phys_start: CONFIG_SYS_PCI1_MEM_PHYS,
size: CONFIG_SYS_PCI1_MEM_SIZE,
flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
},
{
bus_start: CONFIG_SYS_PCI1_IO_BASE,
phys_start: CONFIG_SYS_PCI1_IO_PHYS,
size: CONFIG_SYS_PCI1_IO_SIZE,
flags: PCI_REGION_IO
},
{
bus_start: CONFIG_SYS_PCI1_MMIO_BASE,
phys_start: CONFIG_SYS_PCI1_MMIO_PHYS,
size: CONFIG_SYS_PCI1_MMIO_SIZE,
flags: PCI_REGION_MEM
},
};
#ifdef CONFIG_MPC83XX_PCI2
static struct pci_region pci2_regions[] = {
{
bus_start: CONFIG_SYS_PCI2_MEM_BASE,
phys_start: CONFIG_SYS_PCI2_MEM_PHYS,
size: CONFIG_SYS_PCI2_MEM_SIZE,
flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
},
{
bus_start: CONFIG_SYS_PCI2_IO_BASE,
phys_start: CONFIG_SYS_PCI2_IO_PHYS,
size: CONFIG_SYS_PCI2_IO_SIZE,
flags: PCI_REGION_IO
},
{
bus_start: CONFIG_SYS_PCI2_MMIO_BASE,
phys_start: CONFIG_SYS_PCI2_MMIO_PHYS,
size: CONFIG_SYS_PCI2_MMIO_SIZE,
flags: PCI_REGION_MEM
},
};
#endif
void pci_init_board(void)
{
volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
#ifndef CONFIG_MPC83XX_PCI2
struct pci_region *reg[] = { pci1_regions };
#else
struct pci_region *reg[] = { pci1_regions, pci2_regions };
#endif
u8 reg8;
#if defined(CONFIG_SYS_I2C)
i2c_set_bus_num(1);
/* Read the PCI_M66EN jumper setting */
if ((i2c_read(CONFIG_SYS_I2C_8574_ADDR2, 0, 0, &reg8, sizeof(reg8)) == 0) ||
(i2c_read(CONFIG_SYS_I2C_8574A_ADDR2, 0, 0, &reg8, sizeof(reg8)) == 0)) {
if (reg8 & I2C_8574_PCI66)
clk->occr = 0xff000000; /* 66 MHz PCI */
else
clk->occr = 0xff600001; /* 33 MHz PCI */
} else {
clk->occr = 0xff600001; /* 33 MHz PCI */
}
#else
clk->occr = 0xff000000; /* 66 MHz PCI */
#endif
udelay(2000);
/* Configure PCI Local Access Windows */
pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G;
pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_32M;
udelay(2000);
#ifndef CONFIG_MPC83XX_PCI2
mpc83xx_pci_init(1, reg);
#else
mpc83xx_pci_init(2, reg);
#endif
}