|  | // SPDX-License-Identifier: GPL-2.0+ | 
|  | /* | 
|  | * | 
|  | * Common security related functions for OMAP devices | 
|  | * | 
|  | * (C) Copyright 2016-2017 | 
|  | * Texas Instruments, <www.ti.com> | 
|  | * | 
|  | * Daniel Allred <d-allred@ti.com> | 
|  | * Andreas Dannenberg <dannenberg@ti.com> | 
|  | * Harinarayan Bhatta <harinarayan@ti.com> | 
|  | * Andrew F. Davis <afd@ti.com> | 
|  | */ | 
|  |  | 
|  | #include <common.h> | 
|  | #include <stdarg.h> | 
|  |  | 
|  | #include <asm/arch/sys_proto.h> | 
|  | #include <asm/cache.h> | 
|  | #include <asm/omap_common.h> | 
|  | #include <asm/omap_sec_common.h> | 
|  | #include <asm/spl.h> | 
|  | #include <asm/ti-common/sys_proto.h> | 
|  | #include <mapmem.h> | 
|  | #include <spl.h> | 
|  | #include <tee/optee.h> | 
|  |  | 
|  | /* Index for signature verify ROM API */ | 
|  | #ifdef CONFIG_AM33XX | 
|  | #define API_HAL_KM_VERIFYCERTIFICATESIGNATURE_INDEX	(0x0000000C) | 
|  | #else | 
|  | #define API_HAL_KM_VERIFYCERTIFICATESIGNATURE_INDEX	(0x0000000E) | 
|  | #endif | 
|  |  | 
|  | /* Index for signature PPA-based TI HAL APIs */ | 
|  | #define PPA_HAL_SERVICES_START_INDEX        (0x200) | 
|  | #define PPA_SERV_HAL_TEE_LOAD_MASTER        (PPA_HAL_SERVICES_START_INDEX + 23) | 
|  | #define PPA_SERV_HAL_TEE_LOAD_SLAVE         (PPA_HAL_SERVICES_START_INDEX + 24) | 
|  | #define PPA_SERV_HAL_SETUP_SEC_RESVD_REGION (PPA_HAL_SERVICES_START_INDEX + 25) | 
|  | #define PPA_SERV_HAL_SETUP_EMIF_FW_REGION   (PPA_HAL_SERVICES_START_INDEX + 26) | 
|  | #define PPA_SERV_HAL_LOCK_EMIF_FW           (PPA_HAL_SERVICES_START_INDEX + 27) | 
|  |  | 
|  | /* Offset of header size if image is signed as ISW */ | 
|  | #define HEADER_SIZE_OFFSET	(0x6D) | 
|  |  | 
|  | int tee_loaded = 0; | 
|  |  | 
|  | /* Argument for PPA_SERV_HAL_TEE_LOAD_MASTER */ | 
|  | struct ppa_tee_load_info { | 
|  | u32 tee_sec_mem_start; /* Physical start address reserved for TEE */ | 
|  | u32 tee_sec_mem_size;  /* Size of the memory reserved for TEE */ | 
|  | u32 tee_cert_start;    /* Address where signed TEE binary is loaded */ | 
|  | u32 tee_cert_size;     /* Size of TEE certificate (signed binary) */ | 
|  | u32 tee_jump_addr;     /* Address to jump to start TEE execution */ | 
|  | u32 tee_arg0;          /* argument to TEE jump function, in r0 */ | 
|  | }; | 
|  |  | 
|  | static uint32_t secure_rom_call_args[5] __aligned(ARCH_DMA_MINALIGN) __section(".data"); | 
|  |  | 
|  | u32 secure_rom_call(u32 service, u32 proc_id, u32 flag, ...) | 
|  | { | 
|  | int i; | 
|  | u32 num_args; | 
|  | va_list ap; | 
|  |  | 
|  | va_start(ap, flag); | 
|  |  | 
|  | num_args = va_arg(ap, u32); | 
|  |  | 
|  | if (num_args > 4) { | 
|  | va_end(ap); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* Copy args to aligned args structure */ | 
|  | for (i = 0; i < num_args; i++) | 
|  | secure_rom_call_args[i + 1] = va_arg(ap, u32); | 
|  |  | 
|  | secure_rom_call_args[0] = num_args; | 
|  |  | 
|  | va_end(ap); | 
|  |  | 
|  | /* if data cache is enabled, flush the aligned args structure */ | 
|  | flush_dcache_range( | 
|  | (unsigned int)&secure_rom_call_args[0], | 
|  | (unsigned int)&secure_rom_call_args[0] + | 
|  | roundup(sizeof(secure_rom_call_args), ARCH_DMA_MINALIGN)); | 
|  |  | 
|  | return omap_smc_sec(service, proc_id, flag, secure_rom_call_args); | 
|  | } | 
|  |  | 
|  | static u32 find_sig_start(char *image, size_t size) | 
|  | { | 
|  | char *image_end = image + size; | 
|  | char *sig_start_magic = "CERT_"; | 
|  | int magic_str_len = strlen(sig_start_magic); | 
|  | char *ch; | 
|  |  | 
|  | while (--image_end > image) { | 
|  | if (*image_end == '_') { | 
|  | ch = image_end - magic_str_len + 1; | 
|  | if (!strncmp(ch, sig_start_magic, magic_str_len)) | 
|  | return (u32)ch; | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int secure_boot_verify_image(void **image, size_t *size) | 
|  | { | 
|  | int result = 1; | 
|  | u32 cert_addr, sig_addr; | 
|  | size_t cert_size; | 
|  |  | 
|  | /* Perform cache writeback on input buffer */ | 
|  | flush_dcache_range( | 
|  | rounddown((u32)*image, ARCH_DMA_MINALIGN), | 
|  | roundup((u32)*image + *size, ARCH_DMA_MINALIGN)); | 
|  |  | 
|  | cert_addr = (uint32_t)*image; | 
|  | sig_addr = find_sig_start((char *)*image, *size); | 
|  |  | 
|  | if (sig_addr == 0) { | 
|  | printf("No signature found in image!\n"); | 
|  | result = 1; | 
|  | goto auth_exit; | 
|  | } | 
|  |  | 
|  | *size = sig_addr - cert_addr;	/* Subtract out the signature size */ | 
|  | /* Subtract header if present */ | 
|  | if (strncmp((char *)sig_addr, "CERT_ISW_", 9) == 0) | 
|  | *size -= ((u32 *)*image)[HEADER_SIZE_OFFSET]; | 
|  | cert_size = *size; | 
|  |  | 
|  | /* Check if image load address is 32-bit aligned */ | 
|  | if (!IS_ALIGNED(cert_addr, 4)) { | 
|  | printf("Image is not 4-byte aligned!\n"); | 
|  | result = 1; | 
|  | goto auth_exit; | 
|  | } | 
|  |  | 
|  | /* Image size also should be multiple of 4 */ | 
|  | if (!IS_ALIGNED(cert_size, 4)) { | 
|  | printf("Image size is not 4-byte aligned!\n"); | 
|  | result = 1; | 
|  | goto auth_exit; | 
|  | } | 
|  |  | 
|  | /* Call ROM HAL API to verify certificate signature */ | 
|  | debug("%s: load_addr = %x, size = %x, sig_addr = %x\n", __func__, | 
|  | cert_addr, cert_size, sig_addr); | 
|  |  | 
|  | result = secure_rom_call( | 
|  | API_HAL_KM_VERIFYCERTIFICATESIGNATURE_INDEX, 0, 0, | 
|  | 4, cert_addr, cert_size, sig_addr, 0xFFFFFFFF); | 
|  |  | 
|  | /* Perform cache writeback on output buffer */ | 
|  | flush_dcache_range( | 
|  | rounddown((u32)*image, ARCH_DMA_MINALIGN), | 
|  | roundup((u32)*image + *size, ARCH_DMA_MINALIGN)); | 
|  |  | 
|  | auth_exit: | 
|  | if (result != 0) { | 
|  | printf("Authentication failed!\n"); | 
|  | printf("Return Value = %08X\n", result); | 
|  | hang(); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Output notification of successful authentication to re-assure the | 
|  | * user that the secure code is being processed as expected. However | 
|  | * suppress any such log output in case of building for SPL and booting | 
|  | * via YMODEM. This is done to avoid disturbing the YMODEM serial | 
|  | * protocol transactions. | 
|  | */ | 
|  | if (!(IS_ENABLED(CONFIG_SPL_BUILD) && | 
|  | IS_ENABLED(CONFIG_SPL_YMODEM_SUPPORT) && | 
|  | spl_boot_device() == BOOT_DEVICE_UART)) | 
|  | printf("Authentication passed\n"); | 
|  |  | 
|  | return result; | 
|  | } | 
|  |  | 
|  | u32 get_sec_mem_start(void) | 
|  | { | 
|  | u32 sec_mem_start = CONFIG_TI_SECURE_EMIF_REGION_START; | 
|  | u32 sec_mem_size = CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE; | 
|  | /* | 
|  | * Total reserved region is all contiguous with protected | 
|  | * region coming first, followed by the non-secure region. | 
|  | * If 0x0 start address is given, we simply put the reserved | 
|  | * region at the end of the external DRAM. | 
|  | */ | 
|  | if (sec_mem_start == 0) | 
|  | sec_mem_start = | 
|  | (CONFIG_SYS_SDRAM_BASE + ( | 
|  | #if defined(CONFIG_OMAP54XX) | 
|  | omap_sdram_size() | 
|  | #else | 
|  | get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, | 
|  | CONFIG_MAX_RAM_BANK_SIZE) | 
|  | #endif | 
|  | - sec_mem_size)); | 
|  | return sec_mem_start; | 
|  | } | 
|  |  | 
|  | int secure_emif_firewall_setup(uint8_t region_num, uint32_t start_addr, | 
|  | uint32_t size, uint32_t access_perm, | 
|  | uint32_t initiator_perm) | 
|  | { | 
|  | int result = 1; | 
|  |  | 
|  | /* | 
|  | * Call PPA HAL API to do any other general firewall | 
|  | * configuration for regions 1-6 of the EMIF firewall. | 
|  | */ | 
|  | debug("%s: regionNum = %x, startAddr = %x, size = %x", __func__, | 
|  | region_num, start_addr, size); | 
|  |  | 
|  | result = secure_rom_call( | 
|  | PPA_SERV_HAL_SETUP_EMIF_FW_REGION, 0, 0, 4, | 
|  | (start_addr & 0xFFFFFFF0) | (region_num & 0x0F), | 
|  | size, access_perm, initiator_perm); | 
|  |  | 
|  | if (result != 0) { | 
|  | puts("Secure EMIF Firewall Setup failed!\n"); | 
|  | debug("Return Value = %x\n", result); | 
|  | } | 
|  |  | 
|  | return result; | 
|  | } | 
|  |  | 
|  | #if	(CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE <  \ | 
|  | CONFIG_TI_SECURE_EMIF_PROTECTED_REGION_SIZE) | 
|  | #error	"TI Secure EMIF: Protected size cannot be larger than total size." | 
|  | #endif | 
|  | int secure_emif_reserve(void) | 
|  | { | 
|  | int result = 1; | 
|  | u32 sec_mem_start = get_sec_mem_start(); | 
|  | u32 sec_prot_size = CONFIG_TI_SECURE_EMIF_PROTECTED_REGION_SIZE; | 
|  |  | 
|  | /* If there is no protected region, there is no reservation to make */ | 
|  | if (sec_prot_size == 0) | 
|  | return 0; | 
|  |  | 
|  | /* | 
|  | * Call PPA HAL API to reserve a chunk of EMIF SDRAM | 
|  | * for secure world use. This region should be carved out | 
|  | * from use by any public code. EMIF firewall region 7 | 
|  | * will be used to protect this block of memory. | 
|  | */ | 
|  | result = secure_rom_call( | 
|  | PPA_SERV_HAL_SETUP_SEC_RESVD_REGION, | 
|  | 0, 0, 2, sec_mem_start, sec_prot_size); | 
|  |  | 
|  | if (result != 0) { | 
|  | puts("SDRAM Firewall: Secure memory reservation failed!\n"); | 
|  | debug("Return Value = %x\n", result); | 
|  | } | 
|  |  | 
|  | return result; | 
|  | } | 
|  |  | 
|  | int secure_emif_firewall_lock(void) | 
|  | { | 
|  | int result = 1; | 
|  |  | 
|  | /* | 
|  | * Call PPA HAL API to lock the EMIF firewall configurations. | 
|  | * After this API is called, none of the PPA HAL APIs for | 
|  | * configuring the EMIF firewalls will be usable again (that | 
|  | * is, calls to those APIs will return failure and have no | 
|  | * effect). | 
|  | */ | 
|  |  | 
|  | result = secure_rom_call( | 
|  | PPA_SERV_HAL_LOCK_EMIF_FW, | 
|  | 0, 0, 0); | 
|  |  | 
|  | if (result != 0) { | 
|  | puts("Secure EMIF Firewall Lock failed!\n"); | 
|  | debug("Return Value = %x\n", result); | 
|  | } | 
|  |  | 
|  | return result; | 
|  | } | 
|  |  | 
|  | static struct ppa_tee_load_info tee_info __aligned(ARCH_DMA_MINALIGN); | 
|  |  | 
|  | int secure_tee_install(u32 addr) | 
|  | { | 
|  | struct optee_header *hdr; | 
|  | void *loadptr; | 
|  | u32 tee_file_size; | 
|  | u32 sec_mem_start = get_sec_mem_start(); | 
|  | const u32 size = CONFIG_TI_SECURE_EMIF_PROTECTED_REGION_SIZE; | 
|  | u32 ret; | 
|  |  | 
|  | /* If there is no protected region, there is no place to put the TEE */ | 
|  | if (size == 0) { | 
|  | printf("Error loading TEE, no protected memory region available\n"); | 
|  | return -ENOBUFS; | 
|  | } | 
|  |  | 
|  | hdr = (struct optee_header *)map_sysmem(addr, sizeof(struct optee_header)); | 
|  | /* 280 bytes = size of signature */ | 
|  | tee_file_size = hdr->init_size + hdr->paged_size + | 
|  | sizeof(struct optee_header) + 280; | 
|  |  | 
|  | if ((hdr->magic != OPTEE_MAGIC) || | 
|  | (hdr->version != OPTEE_VERSION) || | 
|  | (tee_file_size > size)) { | 
|  | printf("Error in TEE header. Check firewall and TEE sizes\n"); | 
|  | unmap_sysmem(hdr); | 
|  | return CMD_RET_FAILURE; | 
|  | } | 
|  |  | 
|  | tee_info.tee_sec_mem_start = sec_mem_start; | 
|  | tee_info.tee_sec_mem_size = size; | 
|  | tee_info.tee_jump_addr = hdr->init_load_addr_lo; | 
|  | tee_info.tee_cert_start = addr; | 
|  | tee_info.tee_cert_size = tee_file_size; | 
|  | tee_info.tee_arg0 = hdr->init_size + tee_info.tee_jump_addr; | 
|  | unmap_sysmem(hdr); | 
|  | loadptr = map_sysmem(addr, tee_file_size); | 
|  |  | 
|  | debug("tee_info.tee_sec_mem_start= %08X\n", tee_info.tee_sec_mem_start); | 
|  | debug("tee_info.tee_sec_mem_size = %08X\n", tee_info.tee_sec_mem_size); | 
|  | debug("tee_info.tee_jump_addr = %08X\n", tee_info.tee_jump_addr); | 
|  | debug("tee_info.tee_cert_start = %08X\n", tee_info.tee_cert_start); | 
|  | debug("tee_info.tee_cert_size = %08X\n", tee_info.tee_cert_size); | 
|  | debug("tee_info.tee_arg0 = %08X\n", tee_info.tee_arg0); | 
|  | debug("tee_file_size = %d\n", tee_file_size); | 
|  |  | 
|  | #if !defined(CONFIG_SYS_DCACHE_OFF) | 
|  | flush_dcache_range( | 
|  | rounddown((u32)loadptr, ARCH_DMA_MINALIGN), | 
|  | roundup((u32)loadptr + tee_file_size, ARCH_DMA_MINALIGN)); | 
|  |  | 
|  | flush_dcache_range((u32)&tee_info, (u32)&tee_info + | 
|  | roundup(sizeof(tee_info), ARCH_DMA_MINALIGN)); | 
|  | #endif | 
|  | unmap_sysmem(loadptr); | 
|  |  | 
|  | ret = secure_rom_call(PPA_SERV_HAL_TEE_LOAD_MASTER, 0, 0, 1, &tee_info); | 
|  | if (ret) { | 
|  | printf("TEE_LOAD_MASTER Failed\n"); | 
|  | return ret; | 
|  | } | 
|  | printf("TEE_LOAD_MASTER Done\n"); | 
|  |  | 
|  | #if defined(CONFIG_OMAP54XX) | 
|  | if (!is_dra72x()) { | 
|  | u32 *smc_cpu1_params; | 
|  | /* Reuse the tee_info buffer for SMC params */ | 
|  | smc_cpu1_params = (u32 *)&tee_info; | 
|  | smc_cpu1_params[0] = 0; | 
|  | #if !defined(CONFIG_SYS_DCACHE_OFF) | 
|  | flush_dcache_range((u32)smc_cpu1_params, (u32)smc_cpu1_params + | 
|  | roundup(sizeof(u32), ARCH_DMA_MINALIGN)); | 
|  | #endif | 
|  | ret = omap_smc_sec_cpu1(PPA_SERV_HAL_TEE_LOAD_SLAVE, 0, 0, | 
|  | smc_cpu1_params); | 
|  | if (ret) { | 
|  | printf("TEE_LOAD_SLAVE Failed\n"); | 
|  | return ret; | 
|  | } | 
|  | printf("TEE_LOAD_SLAVE Done\n"); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | tee_loaded = 1; | 
|  |  | 
|  | return 0; | 
|  | } |