| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2004 |
| * Pierre Aubert, Staubli Faverges , <p.aubert@staubli.com> |
| * Copyright 2011 Freescale Semiconductor, Inc. |
| */ |
| |
| /************************************************************************ |
| Get Parameters for the video mode: |
| The default video mode can be defined in CONFIG_SYS_DEFAULT_VIDEO_MODE. |
| If undefined, default video mode is set to 0x301 |
| Parameters can be set via the variable "videomode" in the environment. |
| 2 diferent ways are possible: |
| "videomode=301" - 301 is a hexadecimal number describing the VESA |
| mode. Following modes are implemented: |
| |
| Colors 640x480 800x600 1024x768 1152x864 1280x1024 |
| --------+--------------------------------------------- |
| 8 bits | 0x301 0x303 0x305 0x161 0x307 |
| 15 bits | 0x310 0x313 0x316 0x162 0x319 |
| 16 bits | 0x311 0x314 0x317 0x163 0x31A |
| 24 bits | 0x312 0x315 0x318 ? 0x31B |
| --------+--------------------------------------------- |
| "videomode=bootargs" |
| - the parameters are parsed from the bootargs. |
| The format is "NAME:VALUE,NAME:VALUE" etc. |
| Ex.: |
| "bootargs=video=ctfb:x:800,y:600,depth:16,pclk:25000" |
| Parameters not included in the list will be taken from |
| the default mode, which is one of the following: |
| mode:0 640x480x24 |
| mode:1 800x600x16 |
| mode:2 1024x768x8 |
| mode:3 960x720x24 |
| mode:4 1152x864x16 |
| mode:5 1280x1024x8 |
| |
| if "mode" is not provided within the parameter list, |
| mode:0 is assumed. |
| Following parameters are supported: |
| x xres = visible resolution horizontal |
| y yres = visible resolution vertical |
| pclk pixelclocks in pico sec |
| le left_marging time from sync to picture in pixelclocks |
| ri right_marging time from picture to sync in pixelclocks |
| up upper_margin time from sync to picture |
| lo lower_margin |
| hs hsync_len length of horizontal sync |
| vs vsync_len length of vertical sync |
| sync see FB_SYNC_* |
| vmode see FB_VMODE_* |
| depth Color depth in bits per pixel |
| All other parameters in the variable bootargs are ignored. |
| It is also possible to set the parameters direct in the |
| variable "videomode", or in another variable i.e. |
| "myvideo" and setting the variable "videomode=myvideo".. |
| ****************************************************************************/ |
| |
| #include <common.h> |
| #include <edid.h> |
| #include <errno.h> |
| #include <linux/ctype.h> |
| |
| #include "videomodes.h" |
| |
| const struct ctfb_vesa_modes vesa_modes[VESA_MODES_COUNT] = { |
| {0x301, RES_MODE_640x480, 8}, |
| {0x310, RES_MODE_640x480, 15}, |
| {0x311, RES_MODE_640x480, 16}, |
| {0x312, RES_MODE_640x480, 24}, |
| {0x303, RES_MODE_800x600, 8}, |
| {0x313, RES_MODE_800x600, 15}, |
| {0x314, RES_MODE_800x600, 16}, |
| {0x315, RES_MODE_800x600, 24}, |
| {0x305, RES_MODE_1024x768, 8}, |
| {0x316, RES_MODE_1024x768, 15}, |
| {0x317, RES_MODE_1024x768, 16}, |
| {0x318, RES_MODE_1024x768, 24}, |
| {0x161, RES_MODE_1152x864, 8}, |
| {0x162, RES_MODE_1152x864, 15}, |
| {0x163, RES_MODE_1152x864, 16}, |
| {0x307, RES_MODE_1280x1024, 8}, |
| {0x319, RES_MODE_1280x1024, 15}, |
| {0x31A, RES_MODE_1280x1024, 16}, |
| {0x31B, RES_MODE_1280x1024, 24}, |
| }; |
| const struct ctfb_res_modes res_mode_init[RES_MODES_COUNT] = { |
| /* x y hz pixclk ps/kHz le ri up lo hs vs s vmode */ |
| #ifndef CONFIG_VIDEO_STD_TIMINGS |
| { 640, 480, 60, 39721, 25180, 40, 24, 32, 11, 96, 2, 0, FB_VMODE_NONINTERLACED}, |
| { 800, 600, 60, 27778, 36000, 64, 24, 22, 1, 72, 2, 0, FB_VMODE_NONINTERLACED}, |
| {1024, 768, 60, 15384, 65000, 168, 8, 29, 3, 144, 4, 0, FB_VMODE_NONINTERLACED}, |
| { 960, 720, 80, 13100, 76335, 160, 40, 32, 8, 80, 4, 0, FB_VMODE_NONINTERLACED}, |
| {1152, 864, 60, 12004, 83300, 200, 64, 32, 16, 80, 4, 0, FB_VMODE_NONINTERLACED}, |
| {1280, 1024, 60, 9090, 110000, 200, 48, 26, 1, 184, 3, 0, FB_VMODE_NONINTERLACED}, |
| #else |
| { 640, 480, 60, 39683, 25200, 48, 16, 33, 10, 96, 2, 0, FB_VMODE_NONINTERLACED}, |
| { 800, 600, 60, 25000, 40000, 88, 40, 23, 1, 128, 4, FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED}, |
| {1024, 768, 60, 15384, 65000, 160, 24, 29, 3, 136, 6, 0, FB_VMODE_NONINTERLACED}, |
| { 960, 720, 75, 13468, 74250, 176, 72, 27, 1, 112, 2, 0, FB_VMODE_NONINTERLACED}, |
| {1152, 864, 75, 9259, 108000, 256, 64, 32, 1, 128, 3, FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED}, |
| {1280, 1024, 60, 9259, 108000, 248, 48, 38, 1, 112, 3, FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED}, |
| #endif |
| {1280, 720, 60, 13468, 74250, 220, 110, 20, 5, 40, 5, FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED}, |
| {1360, 768, 60, 11696, 85500, 256, 64, 17, 3, 112, 7, 0, FB_VMODE_NONINTERLACED}, |
| {1920, 1080, 60, 6734, 148500, 148, 88, 36, 4, 44, 5, FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED}, |
| {1920, 1200, 60, 6494, 154000, 80, 48, 26, 3, 32, 6, FB_SYNC_HOR_HIGH_ACT, FB_VMODE_NONINTERLACED}, |
| }; |
| |
| /************************************************************************ |
| * Get Parameters for the video mode: |
| */ |
| /********************************************************************* |
| * returns the length to the next seperator |
| */ |
| static int |
| video_get_param_len(const char *start, char sep) |
| { |
| int i = 0; |
| while ((*start != 0) && (*start != sep)) { |
| start++; |
| i++; |
| } |
| return i; |
| } |
| |
| static int |
| video_search_param (char *start, char *param) |
| { |
| int len, totallen, i; |
| char *p = start; |
| len = strlen (param); |
| totallen = len + strlen (start); |
| for (i = 0; i < totallen; i++) { |
| if (strncmp (p++, param, len) == 0) |
| return (i); |
| } |
| return -1; |
| } |
| |
| /*************************************************************** |
| * Get parameter via the environment as it is done for the |
| * linux kernel i.e: |
| * video=ctfb:x:800,xv:1280,y:600,yv:1024,depth:16,mode:0,pclk:25000, |
| * le:56,ri:48,up:26,lo:5,hs:152,vs:2,sync:0,vmode:0,accel:0 |
| * |
| * penv is a pointer to the environment, containing the string, or the name of |
| * another environment variable. It could even be the term "bootargs" |
| */ |
| |
| #define GET_OPTION(name,var) \ |
| if(strncmp(p,name,strlen(name))==0) { \ |
| val_s=p+strlen(name); \ |
| var=simple_strtoul(val_s, NULL, 10); \ |
| } |
| |
| int video_get_params (struct ctfb_res_modes *pPar, char *penv) |
| { |
| char *p, *s, *val_s; |
| int i = 0; |
| int bpp; |
| int mode; |
| |
| /* first search for the environment containing the real param string */ |
| s = penv; |
| |
| p = env_get(s); |
| if (p) |
| s = p; |
| |
| /* |
| * in case of the bootargs line, we have to start |
| * after "video=ctfb:" |
| */ |
| i = video_search_param (s, "video=ctfb:"); |
| if (i >= 0) { |
| s += i; |
| s += strlen ("video=ctfb:"); |
| } |
| /* search for mode as a default value */ |
| p = s; |
| mode = 0; /* default */ |
| |
| while ((i = video_get_param_len (p, ',')) != 0) { |
| GET_OPTION ("mode:", mode) |
| p += i; |
| if (*p != 0) |
| p++; /* skip ',' */ |
| } |
| |
| if (mode >= RES_MODES_COUNT) |
| mode = 0; |
| |
| *pPar = res_mode_init[mode]; /* copy default values */ |
| bpp = 24 - ((mode % 3) * 8); |
| p = s; /* restart */ |
| |
| while ((i = video_get_param_len (p, ',')) != 0) { |
| GET_OPTION ("x:", pPar->xres) |
| GET_OPTION ("y:", pPar->yres) |
| GET_OPTION ("refresh:", pPar->refresh) |
| GET_OPTION ("le:", pPar->left_margin) |
| GET_OPTION ("ri:", pPar->right_margin) |
| GET_OPTION ("up:", pPar->upper_margin) |
| GET_OPTION ("lo:", pPar->lower_margin) |
| GET_OPTION ("hs:", pPar->hsync_len) |
| GET_OPTION ("vs:", pPar->vsync_len) |
| GET_OPTION ("sync:", pPar->sync) |
| GET_OPTION ("vmode:", pPar->vmode) |
| GET_OPTION ("pclk:", pPar->pixclock) |
| GET_OPTION ("pclk_khz:", pPar->pixclock_khz) |
| GET_OPTION ("depth:", bpp) |
| p += i; |
| if (*p != 0) |
| p++; /* skip ',' */ |
| } |
| return bpp; |
| } |
| |
| /* |
| * Parse the 'video-mode' environment variable |
| * |
| * Example: "video-mode=fslfb:1280x1024-32@60,monitor=dvi". See |
| * doc/README.video for more information on how to set the variable. |
| * |
| * @xres: returned value of X-resolution |
| * @yres: returned value of Y-resolution |
| * @depth: returned value of color depth |
| * @freq: returned value of monitor frequency |
| * @options: pointer to any remaining options, or NULL |
| * |
| * Returns 1 if valid values were found, 0 otherwise |
| */ |
| int video_get_video_mode(unsigned int *xres, unsigned int *yres, |
| unsigned int *depth, unsigned int *freq, const char **options) |
| { |
| char *p = env_get("video-mode"); |
| if (!p) |
| return 0; |
| |
| /* Skip over the driver name, which we don't care about. */ |
| p = strchr(p, ':'); |
| if (!p) |
| return 0; |
| |
| /* Get the X-resolution*/ |
| while (*p && !isdigit(*p)) |
| p++; |
| *xres = simple_strtoul(p, &p, 10); |
| if (!*xres) |
| return 0; |
| |
| /* Get the Y-resolution */ |
| while (*p && !isdigit(*p)) |
| p++; |
| *yres = simple_strtoul(p, &p, 10); |
| if (!*yres) |
| return 0; |
| |
| /* Get the depth */ |
| while (*p && !isdigit(*p)) |
| p++; |
| *depth = simple_strtoul(p, &p, 10); |
| if (!*depth) |
| return 0; |
| |
| /* Get the frequency */ |
| while (*p && !isdigit(*p)) |
| p++; |
| *freq = simple_strtoul(p, &p, 10); |
| if (!*freq) |
| return 0; |
| |
| /* Find the extra options, if any */ |
| p = strchr(p, ','); |
| *options = p ? p + 1 : NULL; |
| |
| return 1; |
| } |
| |
| /* |
| * Parse the 'video-mode' environment variable using video_get_video_mode() |
| * and lookup the matching ctfb_res_modes in res_mode_init. |
| * |
| * @default_mode: RES_MODE_##x## define for the mode to store in mode_ret |
| * when 'video-mode' is not set or does not contain a valid mode |
| * @default_depth: depth to set when 'video-mode' is not set |
| * @mode_ret: pointer where the mode will be stored |
| * @depth_ret: pointer where the depth will be stored |
| * @options: pointer to any remaining options, or NULL |
| */ |
| void video_get_ctfb_res_modes(int default_mode, unsigned int default_depth, |
| const struct ctfb_res_modes **mode_ret, |
| unsigned int *depth_ret, |
| const char **options) |
| { |
| unsigned int i, xres, yres, depth, refresh; |
| |
| *mode_ret = &res_mode_init[default_mode]; |
| *depth_ret = default_depth; |
| *options = NULL; |
| |
| if (!video_get_video_mode(&xres, &yres, &depth, &refresh, options)) |
| return; |
| |
| for (i = 0; i < RES_MODES_COUNT; i++) { |
| if (res_mode_init[i].xres == xres && |
| res_mode_init[i].yres == yres && |
| res_mode_init[i].refresh == refresh) { |
| *mode_ret = &res_mode_init[i]; |
| *depth_ret = depth; |
| return; |
| } |
| } |
| |
| printf("video-mode %dx%d-%d@%d not available, falling back to %dx%d-%d@%d\n", |
| xres, yres, depth, refresh, (*mode_ret)->xres, |
| (*mode_ret)->yres, *depth_ret, (*mode_ret)->refresh); |
| } |
| |
| /* |
| * Find the named string option within the ',' separated options string, and |
| * store its value in dest. |
| * |
| * @options: ',' separated options string |
| * @name: name of the option to look for |
| * @dest: destination buffer to store the value of the option in |
| * @dest_len: length of dest |
| * @def: value to store in dest if the option is not present in options |
| */ |
| void video_get_option_string(const char *options, const char *name, |
| char *dest, int dest_len, const char *def) |
| { |
| const char *p = options; |
| const int name_len = strlen(name); |
| int i, len; |
| |
| while (p && (i = video_get_param_len(p, ',')) != 0) { |
| if (strncmp(p, name, name_len) == 0 && p[name_len] == '=') { |
| len = i - (name_len + 1); |
| if (len >= dest_len) |
| len = dest_len - 1; |
| memcpy(dest, &p[name_len + 1], len); |
| dest[len] = 0; |
| return; |
| } |
| p += i; |
| if (*p != 0) |
| p++; /* skip ',' */ |
| } |
| strcpy(dest, def); |
| } |
| |
| /* |
| * Find the named integer option within the ',' separated options string, and |
| * return its value. |
| * |
| * @options: ',' separated options string |
| * @name: name of the option to look for |
| * @def: value to return if the option is not present in options |
| */ |
| int video_get_option_int(const char *options, const char *name, int def) |
| { |
| const char *p = options; |
| const int name_len = strlen(name); |
| int i; |
| |
| while (p && (i = video_get_param_len(p, ',')) != 0) { |
| if (strncmp(p, name, name_len) == 0 && p[name_len] == '=') |
| return simple_strtoul(&p[name_len + 1], NULL, 10); |
| |
| p += i; |
| if (*p != 0) |
| p++; /* skip ',' */ |
| } |
| return def; |
| } |
| |
| /** |
| * Convert an EDID detailed timing to a struct ctfb_res_modes |
| * |
| * @param t The EDID detailed timing to be converted |
| * @param mode Returns the converted timing |
| * |
| * @return 0 on success, or a negative errno on error |
| */ |
| int video_edid_dtd_to_ctfb_res_modes(struct edid_detailed_timing *t, |
| struct ctfb_res_modes *mode) |
| { |
| int margin, h_total, v_total; |
| |
| /* Check all timings are non 0 */ |
| if (EDID_DETAILED_TIMING_PIXEL_CLOCK(*t) == 0 || |
| EDID_DETAILED_TIMING_HORIZONTAL_ACTIVE(*t) == 0 || |
| EDID_DETAILED_TIMING_HORIZONTAL_BLANKING(*t) == 0 || |
| EDID_DETAILED_TIMING_VERTICAL_ACTIVE(*t) == 0 || |
| EDID_DETAILED_TIMING_VERTICAL_BLANKING(*t) == 0 || |
| EDID_DETAILED_TIMING_HSYNC_OFFSET(*t) == 0 || |
| EDID_DETAILED_TIMING_VSYNC_OFFSET(*t) == 0 || |
| /* 3d formats are not supported*/ |
| EDID_DETAILED_TIMING_FLAG_STEREO(*t) != 0) |
| return -EINVAL; |
| |
| mode->xres = EDID_DETAILED_TIMING_HORIZONTAL_ACTIVE(*t); |
| mode->yres = EDID_DETAILED_TIMING_VERTICAL_ACTIVE(*t); |
| |
| h_total = mode->xres + EDID_DETAILED_TIMING_HORIZONTAL_BLANKING(*t); |
| v_total = mode->yres + EDID_DETAILED_TIMING_VERTICAL_BLANKING(*t); |
| mode->refresh = EDID_DETAILED_TIMING_PIXEL_CLOCK(*t) / |
| (h_total * v_total); |
| |
| mode->pixclock_khz = EDID_DETAILED_TIMING_PIXEL_CLOCK(*t) / 1000; |
| mode->pixclock = 1000000000L / mode->pixclock_khz; |
| |
| mode->right_margin = EDID_DETAILED_TIMING_HSYNC_OFFSET(*t); |
| mode->hsync_len = EDID_DETAILED_TIMING_HSYNC_PULSE_WIDTH(*t); |
| margin = EDID_DETAILED_TIMING_HORIZONTAL_BLANKING(*t) - |
| (mode->right_margin + mode->hsync_len); |
| if (margin <= 0) |
| return -EINVAL; |
| |
| mode->left_margin = margin; |
| |
| mode->lower_margin = EDID_DETAILED_TIMING_VSYNC_OFFSET(*t); |
| mode->vsync_len = EDID_DETAILED_TIMING_VSYNC_PULSE_WIDTH(*t); |
| margin = EDID_DETAILED_TIMING_VERTICAL_BLANKING(*t) - |
| (mode->lower_margin + mode->vsync_len); |
| if (margin <= 0) |
| return -EINVAL; |
| |
| mode->upper_margin = margin; |
| |
| mode->sync = 0; |
| if (EDID_DETAILED_TIMING_FLAG_HSYNC_POLARITY(*t)) |
| mode->sync |= FB_SYNC_HOR_HIGH_ACT; |
| if (EDID_DETAILED_TIMING_FLAG_VSYNC_POLARITY(*t)) |
| mode->sync |= FB_SYNC_VERT_HIGH_ACT; |
| |
| if (EDID_DETAILED_TIMING_FLAG_INTERLACED(*t)) |
| mode->vmode = FB_VMODE_INTERLACED; |
| else |
| mode->vmode = FB_VMODE_NONINTERLACED; |
| |
| return 0; |
| } |