| #ifndef _LINUX_FB_H |
| #define _LINUX_FB_H |
| |
| #include <linux/types.h> |
| #include <linux/list.h> |
| |
| /* Definitions of frame buffers */ |
| |
| #define FB_MAX 32 /* sufficient for now */ |
| |
| #define FB_TYPE_PACKED_PIXELS 0 /* Packed Pixels */ |
| |
| #define FB_VISUAL_MONO01 0 /* Monochr. 1=Black 0=White */ |
| #define FB_VISUAL_MONO10 1 /* Monochr. 1=White 0=Black */ |
| #define FB_VISUAL_TRUECOLOR 2 /* True color */ |
| #define FB_VISUAL_PSEUDOCOLOR 3 /* Pseudo color (like atari) */ |
| #define FB_VISUAL_DIRECTCOLOR 4 /* Direct color */ |
| #define FB_VISUAL_STATIC_PSEUDOCOLOR 5 /* Pseudo color readonly */ |
| |
| #define FB_ACCEL_NONE 0 /* no hardware accelerator */ |
| |
| struct fb_fix_screeninfo { |
| char id[16]; /* identification string eg "TT Builtin" */ |
| unsigned long smem_start; /* Start of frame buffer mem */ |
| /* (physical address) */ |
| __u32 smem_len; /* Length of frame buffer mem */ |
| __u32 type; /* see FB_TYPE_* */ |
| __u32 type_aux; /* Interleave for interleaved Planes */ |
| __u32 visual; /* see FB_VISUAL_* */ |
| __u16 xpanstep; /* zero if no hardware panning */ |
| __u16 ypanstep; /* zero if no hardware panning */ |
| __u16 ywrapstep; /* zero if no hardware ywrap */ |
| __u32 line_length; /* length of a line in bytes */ |
| unsigned long mmio_start; /* Start of Memory Mapped I/O */ |
| /* (physical address) */ |
| __u32 mmio_len; /* Length of Memory Mapped I/O */ |
| __u32 accel; /* Indicate to driver which */ |
| /* specific chip/card we have */ |
| __u16 reserved[3]; /* Reserved for future compatibility */ |
| }; |
| |
| /* |
| * Interpretation of offset for color fields: All offsets are from the right, |
| * inside a "pixel" value, which is exactly 'bits_per_pixel' wide (means: you |
| * can use the offset as right argument to <<). A pixel afterwards is a bit |
| * stream and is written to video memory as that unmodified. |
| * |
| * For pseudocolor: offset and length should be the same for all color |
| * components. Offset specifies the position of the least significant bit |
| * of the pallette index in a pixel value. Length indicates the number |
| * of available palette entries (i.e. # of entries = 1 << length). |
| */ |
| struct fb_bitfield { |
| __u32 offset; /* beginning of bitfield */ |
| __u32 length; /* length of bitfield */ |
| __u32 msb_right; |
| |
| }; |
| |
| #define FB_NONSTD_HAM 1 /* Hold-And-Modify (HAM) */ |
| #define FB_NONSTD_REV_PIX_IN_B 2 /* order of pixels in each byte is reversed */ |
| |
| #define FB_ACTIVATE_NOW 0 /* set values immediately (or vbl)*/ |
| #define FB_ACTIVATE_NXTOPEN 1 /* activate on next open */ |
| #define FB_ACTIVATE_TEST 2 /* don't set, round up impossible */ |
| #define FB_ACTIVATE_MASK 15 |
| /* values */ |
| #define FB_ACTIVATE_VBL 16 /* activate values on next vbl */ |
| #define FB_CHANGE_CMAP_VBL 32 /* change colormap on vbl */ |
| #define FB_ACTIVATE_ALL 64 /* change all VCs on this fb */ |
| #define FB_ACTIVATE_FORCE 128 /* force apply even when no change*/ |
| #define FB_ACTIVATE_INV_MODE 256 /* invalidate videomode */ |
| |
| #define FB_SYNC_HOR_HIGH_ACT 1 /* horizontal sync high active */ |
| #define FB_SYNC_VERT_HIGH_ACT 2 /* vertical sync high active */ |
| #define FB_SYNC_EXT 4 /* external sync */ |
| #define FB_SYNC_COMP_HIGH_ACT 8 /* composite sync high active */ |
| #define FB_SYNC_BROADCAST 16 /* broadcast video timings */ |
| /* vtotal = 144d/288n/576i => PAL */ |
| /* vtotal = 121d/242n/484i => NTSC */ |
| #define FB_SYNC_ON_GREEN 32 /* sync on green */ |
| |
| #define FB_VMODE_NONINTERLACED 0 /* non interlaced */ |
| #define FB_VMODE_INTERLACED 1 /* interlaced */ |
| #define FB_VMODE_DOUBLE 2 /* double scan */ |
| #define FB_VMODE_ODD_FLD_FIRST 4 /* interlaced: top line first */ |
| #define FB_VMODE_MASK 255 |
| |
| #define FB_VMODE_YWRAP 256 /* ywrap instead of panning */ |
| #define FB_VMODE_SMOOTH_XPAN 512 /* smooth xpan possible (internally used) */ |
| #define FB_VMODE_CONUPDATE 512 /* don't update x/yoffset */ |
| |
| /* |
| * Display rotation support |
| */ |
| #define FB_ROTATE_UR 0 |
| #define FB_ROTATE_CW 1 |
| #define FB_ROTATE_UD 2 |
| #define FB_ROTATE_CCW 3 |
| |
| #define PICOS2KHZ(a) (1000000000UL/(a)) |
| #define KHZ2PICOS(a) (1000000000UL/(a)) |
| |
| struct fb_var_screeninfo { |
| __u32 xres; /* visible resolution */ |
| __u32 yres; |
| __u32 xres_virtual; /* virtual resolution */ |
| __u32 yres_virtual; |
| __u32 xoffset; /* offset from virtual to visible */ |
| __u32 yoffset; /* resolution */ |
| |
| __u32 bits_per_pixel; /* guess what */ |
| __u32 grayscale; /* != 0 Graylevels instead of colors */ |
| |
| struct fb_bitfield red; /* bitfield in fb mem if true color, */ |
| struct fb_bitfield green; /* else only length is significant */ |
| struct fb_bitfield blue; |
| struct fb_bitfield transp; /* transparency */ |
| |
| __u32 nonstd; /* != 0 Non standard pixel format */ |
| |
| __u32 activate; /* see FB_ACTIVATE_* */ |
| |
| __u32 height; /* height of picture in mm */ |
| __u32 width; /* width of picture in mm */ |
| |
| __u32 accel_flags; /* (OBSOLETE) see fb_info.flags */ |
| |
| /* Timing: All values in pixclocks, except pixclock (of course) */ |
| __u32 pixclock; /* pixel clock in ps (pico seconds) */ |
| __u32 left_margin; /* time from sync to picture */ |
| __u32 right_margin; /* time from picture to sync */ |
| __u32 upper_margin; /* time from sync to picture */ |
| __u32 lower_margin; |
| __u32 hsync_len; /* length of horizontal sync */ |
| __u32 vsync_len; /* length of vertical sync */ |
| __u32 sync; /* see FB_SYNC_* */ |
| __u32 vmode; /* see FB_VMODE_* */ |
| __u32 rotate; /* angle we rotate counter clockwise */ |
| __u32 reserved[5]; /* Reserved for future compatibility */ |
| }; |
| |
| struct fb_cmap { |
| __u32 start; /* First entry */ |
| __u32 len; /* Number of entries */ |
| __u16 *red; /* Red values */ |
| __u16 *green; |
| __u16 *blue; |
| __u16 *transp; /* transparency, can be NULL */ |
| }; |
| |
| struct fb_con2fbmap { |
| __u32 console; |
| __u32 framebuffer; |
| }; |
| |
| /* VESA Blanking Levels */ |
| #define VESA_NO_BLANKING 0 |
| #define VESA_VSYNC_SUSPEND 1 |
| #define VESA_HSYNC_SUSPEND 2 |
| #define VESA_POWERDOWN 3 |
| |
| |
| enum { |
| /* screen: unblanked, hsync: on, vsync: on */ |
| FB_BLANK_UNBLANK = VESA_NO_BLANKING, |
| |
| /* screen: blanked, hsync: on, vsync: on */ |
| FB_BLANK_NORMAL = VESA_NO_BLANKING + 1, |
| |
| /* screen: blanked, hsync: on, vsync: off */ |
| FB_BLANK_VSYNC_SUSPEND = VESA_VSYNC_SUSPEND + 1, |
| |
| /* screen: blanked, hsync: off, vsync: on */ |
| FB_BLANK_HSYNC_SUSPEND = VESA_HSYNC_SUSPEND + 1, |
| |
| /* screen: blanked, hsync: off, vsync: off */ |
| FB_BLANK_POWERDOWN = VESA_POWERDOWN + 1 |
| }; |
| |
| #define FB_VBLANK_VBLANKING 0x001 /* currently in a vertical blank */ |
| #define FB_VBLANK_HBLANKING 0x002 /* currently in a horizontal blank */ |
| #define FB_VBLANK_HAVE_VBLANK 0x004 /* vertical blanks can be detected */ |
| #define FB_VBLANK_HAVE_HBLANK 0x008 /* horizontal blanks can be detected */ |
| #define FB_VBLANK_HAVE_COUNT 0x010 /* global retrace counter is available */ |
| #define FB_VBLANK_HAVE_VCOUNT 0x020 /* the vcount field is valid */ |
| #define FB_VBLANK_HAVE_HCOUNT 0x040 /* the hcount field is valid */ |
| #define FB_VBLANK_VSYNCING 0x080 /* currently in a vsync */ |
| #define FB_VBLANK_HAVE_VSYNC 0x100 /* verical syncs can be detected */ |
| |
| struct fb_vblank { |
| __u32 flags; /* FB_VBLANK flags */ |
| __u32 count; /* counter of retraces since boot */ |
| __u32 vcount; /* current scanline position */ |
| __u32 hcount; /* current scandot position */ |
| __u32 reserved[4]; /* reserved for future compatibility */ |
| }; |
| |
| /* Internal HW accel */ |
| #define ROP_COPY 0 |
| #define ROP_XOR 1 |
| |
| struct fb_copyarea { |
| __u32 dx; |
| __u32 dy; |
| __u32 width; |
| __u32 height; |
| __u32 sx; |
| __u32 sy; |
| }; |
| |
| struct fb_fillrect { |
| __u32 dx; /* screen-relative */ |
| __u32 dy; |
| __u32 width; |
| __u32 height; |
| __u32 color; |
| __u32 rop; |
| }; |
| |
| struct fb_image { |
| __u32 dx; /* Where to place image */ |
| __u32 dy; |
| __u32 width; /* Size of image */ |
| __u32 height; |
| __u32 fg_color; /* Only used when a mono bitmap */ |
| __u32 bg_color; |
| __u8 depth; /* Depth of the image */ |
| const char *data; /* Pointer to image data */ |
| struct fb_cmap cmap; /* color map info */ |
| }; |
| |
| /* |
| * hardware cursor control |
| */ |
| |
| #define FB_CUR_SETIMAGE 0x01 |
| #define FB_CUR_SETPOS 0x02 |
| #define FB_CUR_SETHOT 0x04 |
| #define FB_CUR_SETCMAP 0x08 |
| #define FB_CUR_SETSHAPE 0x10 |
| #define FB_CUR_SETSIZE 0x20 |
| #define FB_CUR_SETALL 0xFF |
| |
| struct fbcurpos { |
| __u16 x, y; |
| }; |
| |
| struct fb_cursor { |
| __u16 set; /* what to set */ |
| __u16 enable; /* cursor on/off */ |
| __u16 rop; /* bitop operation */ |
| const char *mask; /* cursor mask bits */ |
| struct fbcurpos hot; /* cursor hot spot */ |
| struct fb_image image; /* Cursor image */ |
| }; |
| |
| #ifdef CONFIG_FB_BACKLIGHT |
| /* Settings for the generic backlight code */ |
| #define FB_BACKLIGHT_LEVELS 128 |
| #define FB_BACKLIGHT_MAX 0xFF |
| #endif |
| |
| #ifdef __KERNEL__ |
| |
| struct vm_area_struct; |
| struct fb_info; |
| struct device; |
| struct file; |
| |
| /* Definitions below are used in the parsed monitor specs */ |
| #define FB_DPMS_ACTIVE_OFF 1 |
| #define FB_DPMS_SUSPEND 2 |
| #define FB_DPMS_STANDBY 4 |
| |
| #define FB_DISP_DDI 1 |
| #define FB_DISP_ANA_700_300 2 |
| #define FB_DISP_ANA_714_286 4 |
| #define FB_DISP_ANA_1000_400 8 |
| #define FB_DISP_ANA_700_000 16 |
| |
| #define FB_DISP_MONO 32 |
| #define FB_DISP_RGB 64 |
| #define FB_DISP_MULTI 128 |
| #define FB_DISP_UNKNOWN 256 |
| |
| #define FB_SIGNAL_NONE 0 |
| #define FB_SIGNAL_BLANK_BLANK 1 |
| #define FB_SIGNAL_SEPARATE 2 |
| #define FB_SIGNAL_COMPOSITE 4 |
| #define FB_SIGNAL_SYNC_ON_GREEN 8 |
| #define FB_SIGNAL_SERRATION_ON 16 |
| |
| #define FB_MISC_PRIM_COLOR 1 |
| #define FB_MISC_1ST_DETAIL 2 /* First Detailed Timing is preferred */ |
| struct fb_chroma { |
| __u32 redx; /* in fraction of 1024 */ |
| __u32 greenx; |
| __u32 bluex; |
| __u32 whitex; |
| __u32 redy; |
| __u32 greeny; |
| __u32 bluey; |
| __u32 whitey; |
| }; |
| |
| struct fb_monspecs { |
| struct fb_chroma chroma; |
| struct fb_videomode *modedb; /* mode database */ |
| __u8 manufacturer[4]; /* Manufacturer */ |
| __u8 monitor[14]; /* Monitor String */ |
| __u8 serial_no[14]; /* Serial Number */ |
| __u8 ascii[14]; /* ? */ |
| __u32 modedb_len; /* mode database length */ |
| __u32 model; /* Monitor Model */ |
| __u32 serial; /* Serial Number - Integer */ |
| __u32 year; /* Year manufactured */ |
| __u32 week; /* Week Manufactured */ |
| __u32 hfmin; /* hfreq lower limit (Hz) */ |
| __u32 hfmax; /* hfreq upper limit (Hz) */ |
| __u32 dclkmin; /* pixelclock lower limit (Hz) */ |
| __u32 dclkmax; /* pixelclock upper limit (Hz) */ |
| __u16 input; /* display type - see FB_DISP_* */ |
| __u16 dpms; /* DPMS support - see FB_DPMS_ */ |
| __u16 signal; /* Signal Type - see FB_SIGNAL_* */ |
| __u16 vfmin; /* vfreq lower limit (Hz) */ |
| __u16 vfmax; /* vfreq upper limit (Hz) */ |
| __u16 gamma; /* Gamma - in fractions of 100 */ |
| __u16 gtf : 1; /* supports GTF */ |
| __u16 misc; /* Misc flags - see FB_MISC_* */ |
| __u8 version; /* EDID version... */ |
| __u8 revision; /* ...and revision */ |
| __u8 max_x; /* Maximum horizontal size (cm) */ |
| __u8 max_y; /* Maximum vertical size (cm) */ |
| }; |
| |
| struct fb_cmap_user { |
| __u32 start; /* First entry */ |
| __u32 len; /* Number of entries */ |
| __u16 *red; /* Red values */ |
| __u16 *green; |
| __u16 *blue; |
| __u16 *transp; /* transparency, can be NULL */ |
| }; |
| |
| struct fb_image_user { |
| __u32 dx; /* Where to place image */ |
| __u32 dy; |
| __u32 width; /* Size of image */ |
| __u32 height; |
| __u32 fg_color; /* Only used when a mono bitmap */ |
| __u32 bg_color; |
| __u8 depth; /* Depth of the image */ |
| const char *data; /* Pointer to image data */ |
| struct fb_cmap_user cmap; /* color map info */ |
| }; |
| |
| struct fb_cursor_user { |
| __u16 set; /* what to set */ |
| __u16 enable; /* cursor on/off */ |
| __u16 rop; /* bitop operation */ |
| const char *mask; /* cursor mask bits */ |
| struct fbcurpos hot; /* cursor hot spot */ |
| struct fb_image_user image; /* Cursor image */ |
| }; |
| |
| /* |
| * Register/unregister for framebuffer events |
| */ |
| |
| /* The resolution of the passed in fb_info about to change */ |
| #define FB_EVENT_MODE_CHANGE 0x01 |
| /* The display on this fb_info is beeing suspended, no access to the |
| * framebuffer is allowed any more after that call returns |
| */ |
| #define FB_EVENT_SUSPEND 0x02 |
| /* The display on this fb_info was resumed, you can restore the display |
| * if you own it |
| */ |
| #define FB_EVENT_RESUME 0x03 |
| /* An entry from the modelist was removed */ |
| #define FB_EVENT_MODE_DELETE 0x04 |
| /* A driver registered itself */ |
| #define FB_EVENT_FB_REGISTERED 0x05 |
| /* A driver unregistered itself */ |
| #define FB_EVENT_FB_UNREGISTERED 0x06 |
| /* CONSOLE-SPECIFIC: get console to framebuffer mapping */ |
| #define FB_EVENT_GET_CONSOLE_MAP 0x07 |
| /* CONSOLE-SPECIFIC: set console to framebuffer mapping */ |
| #define FB_EVENT_SET_CONSOLE_MAP 0x08 |
| /* A hardware display blank change occurred */ |
| #define FB_EVENT_BLANK 0x09 |
| /* Private modelist is to be replaced */ |
| #define FB_EVENT_NEW_MODELIST 0x0A |
| /* The resolution of the passed in fb_info about to change and |
| all vc's should be changed */ |
| #define FB_EVENT_MODE_CHANGE_ALL 0x0B |
| /* A software display blank change occurred */ |
| #define FB_EVENT_CONBLANK 0x0C |
| /* Get drawing requirements */ |
| #define FB_EVENT_GET_REQ 0x0D |
| /* Unbind from the console if possible */ |
| #define FB_EVENT_FB_UNBIND 0x0E |
| |
| struct fb_event { |
| struct fb_info *info; |
| void *data; |
| }; |
| |
| struct fb_blit_caps { |
| u32 x; |
| u32 y; |
| u32 len; |
| u32 flags; |
| }; |
| |
| /* |
| * Pixmap structure definition |
| * |
| * The purpose of this structure is to translate data |
| * from the hardware independent format of fbdev to what |
| * format the hardware needs. |
| */ |
| |
| #define FB_PIXMAP_DEFAULT 1 /* used internally by fbcon */ |
| #define FB_PIXMAP_SYSTEM 2 /* memory is in system RAM */ |
| #define FB_PIXMAP_IO 4 /* memory is iomapped */ |
| #define FB_PIXMAP_SYNC 256 /* set if GPU can DMA */ |
| |
| struct fb_pixmap { |
| u8 *addr; /* pointer to memory */ |
| u32 size; /* size of buffer in bytes */ |
| u32 offset; /* current offset to buffer */ |
| u32 buf_align; /* byte alignment of each bitmap */ |
| u32 scan_align; /* alignment per scanline */ |
| u32 access_align; /* alignment per read/write (bits) */ |
| u32 flags; /* see FB_PIXMAP_* */ |
| u32 blit_x; /* supported bit block dimensions (1-32)*/ |
| u32 blit_y; /* Format: blit_x = 1 << (width - 1) */ |
| /* blit_y = 1 << (height - 1) */ |
| /* if 0, will be set to 0xffffffff (all)*/ |
| /* access methods */ |
| void (*writeio)(struct fb_info *info, void *dst, void *src, unsigned int size); |
| void (*readio) (struct fb_info *info, void *dst, void *src, unsigned int size); |
| }; |
| |
| #ifdef CONFIG_FB_DEFERRED_IO |
| struct fb_deferred_io { |
| /* delay between mkwrite and deferred handler */ |
| unsigned long delay; |
| struct mutex lock; /* mutex that protects the page list */ |
| struct list_head pagelist; /* list of touched pages */ |
| /* callback */ |
| void (*deferred_io)(struct fb_info *info, struct list_head *pagelist); |
| }; |
| #endif |
| |
| /* FBINFO_* = fb_info.flags bit flags */ |
| #define FBINFO_MODULE 0x0001 /* Low-level driver is a module */ |
| #define FBINFO_HWACCEL_DISABLED 0x0002 |
| /* When FBINFO_HWACCEL_DISABLED is set: |
| * Hardware acceleration is turned off. Software implementations |
| * of required functions (copyarea(), fillrect(), and imageblit()) |
| * takes over; acceleration engine should be in a quiescent state */ |
| |
| /* hints */ |
| #define FBINFO_PARTIAL_PAN_OK 0x0040 /* otw use pan only for double-buffering */ |
| #define FBINFO_READS_FAST 0x0080 /* soft-copy faster than rendering */ |
| |
| /* |
| * A driver may set this flag to indicate that it does want a set_par to be |
| * called every time when fbcon_switch is executed. The advantage is that with |
| * this flag set you can really be sure that set_par is always called before |
| * any of the functions dependant on the correct hardware state or altering |
| * that state, even if you are using some broken X releases. The disadvantage |
| * is that it introduces unwanted delays to every console switch if set_par |
| * is slow. It is a good idea to try this flag in the drivers initialization |
| * code whenever there is a bug report related to switching between X and the |
| * framebuffer console. |
| */ |
| #define FBINFO_MISC_ALWAYS_SETPAR 0x40000 |
| |
| /* |
| * Host and GPU endianness differ. |
| */ |
| #define FBINFO_FOREIGN_ENDIAN 0x100000 |
| /* |
| * Big endian math. This is the same flags as above, but with different |
| * meaning, it is set by the fb subsystem depending FOREIGN_ENDIAN flag |
| * and host endianness. Drivers should not use this flag. |
| */ |
| #define FBINFO_BE_MATH 0x100000 |
| |
| struct fb_info { |
| int node; |
| int flags; |
| struct fb_var_screeninfo var; /* Current var */ |
| struct fb_fix_screeninfo fix; /* Current fix */ |
| struct fb_monspecs monspecs; /* Current Monitor specs */ |
| struct fb_pixmap pixmap; /* Image hardware mapper */ |
| struct fb_pixmap sprite; /* Cursor hardware mapper */ |
| struct fb_cmap cmap; /* Current cmap */ |
| struct list_head modelist; /* mode list */ |
| struct fb_videomode *mode; /* current mode */ |
| |
| char *screen_base; /* Virtual address */ |
| unsigned long screen_size; /* Amount of ioremapped VRAM or 0 */ |
| void *pseudo_palette; /* Fake palette of 16 colors */ |
| #define FBINFO_STATE_RUNNING 0 |
| #define FBINFO_STATE_SUSPENDED 1 |
| u32 state; /* Hardware state i.e suspend */ |
| void *fbcon_par; /* fbcon use-only private area */ |
| /* From here on everything is device dependent */ |
| void *par; |
| }; |
| |
| #define FBINFO_DEFAULT 0 |
| |
| #define FBINFO_FLAG_MODULE FBINFO_MODULE |
| #define FBINFO_FLAG_DEFAULT FBINFO_DEFAULT |
| |
| /* This will go away */ |
| #if defined(__sparc__) |
| |
| /* We map all of our framebuffers such that big-endian accesses |
| * are what we want, so the following is sufficient. |
| */ |
| |
| /* This will go away */ |
| #define fb_readb sbus_readb |
| #define fb_readw sbus_readw |
| #define fb_readl sbus_readl |
| #define fb_readq sbus_readq |
| #define fb_writeb sbus_writeb |
| #define fb_writew sbus_writew |
| #define fb_writel sbus_writel |
| #define fb_writeq sbus_writeq |
| #define fb_memset sbus_memset_io |
| |
| #elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || defined(__hppa__) || defined(__sh__) || defined(__powerpc__) || defined(__bfin__) |
| |
| #define fb_readb __raw_readb |
| #define fb_readw __raw_readw |
| #define fb_readl __raw_readl |
| #define fb_readq __raw_readq |
| #define fb_writeb __raw_writeb |
| #define fb_writew __raw_writew |
| #define fb_writel __raw_writel |
| #define fb_writeq __raw_writeq |
| #define fb_memset memset_io |
| |
| #else |
| |
| #define fb_readb(addr) (*(volatile u8 *) (addr)) |
| #define fb_readw(addr) (*(volatile u16 *) (addr)) |
| #define fb_readl(addr) (*(volatile u32 *) (addr)) |
| #define fb_readq(addr) (*(volatile u64 *) (addr)) |
| #define fb_writeb(b,addr) (*(volatile u8 *) (addr) = (b)) |
| #define fb_writew(b,addr) (*(volatile u16 *) (addr) = (b)) |
| #define fb_writel(b,addr) (*(volatile u32 *) (addr) = (b)) |
| #define fb_writeq(b,addr) (*(volatile u64 *) (addr) = (b)) |
| #define fb_memset memset |
| |
| #endif |
| |
| #define FB_LEFT_POS(p, bpp) (fb_be_math(p) ? (32 - (bpp)) : 0) |
| #define FB_SHIFT_HIGH(p, val, bits) (fb_be_math(p) ? (val) >> (bits) : \ |
| (val) << (bits)) |
| #define FB_SHIFT_LOW(p, val, bits) (fb_be_math(p) ? (val) << (bits) : \ |
| (val) >> (bits)) |
| /* drivers/video/fbmon.c */ |
| #define FB_MAXTIMINGS 0 |
| #define FB_VSYNCTIMINGS 1 |
| #define FB_HSYNCTIMINGS 2 |
| #define FB_DCLKTIMINGS 3 |
| #define FB_IGNOREMON 0x100 |
| |
| #define FB_MODE_IS_UNKNOWN 0 |
| #define FB_MODE_IS_DETAILED 1 |
| #define FB_MODE_IS_STANDARD 2 |
| #define FB_MODE_IS_VESA 4 |
| #define FB_MODE_IS_CALCULATED 8 |
| #define FB_MODE_IS_FIRST 16 |
| #define FB_MODE_IS_FROM_VAR 32 |
| |
| |
| /* drivers/video/fbcmap.c */ |
| |
| extern int fb_alloc_cmap(struct fb_cmap *cmap, int len, int transp); |
| extern void fb_dealloc_cmap(struct fb_cmap *cmap); |
| extern int fb_copy_cmap(const struct fb_cmap *from, struct fb_cmap *to); |
| extern int fb_cmap_to_user(const struct fb_cmap *from, struct fb_cmap_user *to); |
| extern int fb_set_cmap(struct fb_cmap *cmap, struct fb_info *fb_info); |
| extern int fb_set_user_cmap(struct fb_cmap_user *cmap, struct fb_info *fb_info); |
| extern const struct fb_cmap *fb_default_cmap(int len); |
| extern void fb_invert_cmaps(void); |
| |
| struct fb_videomode { |
| const char *name; /* optional */ |
| u32 refresh; /* optional */ |
| u32 xres; |
| u32 yres; |
| u32 pixclock; |
| u32 left_margin; |
| u32 right_margin; |
| u32 upper_margin; |
| u32 lower_margin; |
| u32 hsync_len; |
| u32 vsync_len; |
| u32 sync; |
| u32 vmode; |
| u32 flag; |
| }; |
| |
| int board_video_skip(void); |
| |
| #endif /* __KERNEL__ */ |
| |
| #endif /* _LINUX_FB_H */ |