| /* |
| * Toradex Colibri PXA270 configuration file |
| * |
| * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> |
| * Copyright (C) 2015-2016 Marcel Ziswiler <marcel@ziswiler.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| /* |
| * High Level Board Configuration Options |
| */ |
| #define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */ |
| #define CONFIG_SYS_TEXT_BASE 0x0 |
| /* Avoid overwriting factory configuration block */ |
| #define CONFIG_BOARD_SIZE_LIMIT 0x40000 |
| |
| /* We will never enable dcache because we have to setup MMU first */ |
| #define CONFIG_SYS_DCACHE_OFF |
| |
| #define CONFIG_DISPLAY_BOARDINFO_LATE /* Calls show_board_info() */ |
| |
| /* |
| * Environment settings |
| */ |
| #define CONFIG_ENV_OVERWRITE |
| #define CONFIG_ENV_VARS_UBOOT_CONFIG |
| #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG |
| #define CONFIG_SYS_MALLOC_LEN (128 * 1024) |
| #define CONFIG_ARCH_CPU_INIT |
| #define CONFIG_BOOTCOMMAND \ |
| "if fatload mmc 0 0xa0000000 uImage; then " \ |
| "bootm 0xa0000000; " \ |
| "fi; " \ |
| "if usb reset && fatload usb 0 0xa0000000 uImage; then " \ |
| "bootm 0xa0000000; " \ |
| "fi; " \ |
| "bootm 0xc0000;" |
| #define CONFIG_BOOTARGS "console=tty0 console=ttyS0,115200" |
| #define CONFIG_TIMESTAMP |
| #define CONFIG_CMDLINE_TAG |
| #define CONFIG_SETUP_MEMORY_TAGS |
| |
| /* |
| * Serial Console Configuration |
| */ |
| #define CONFIG_BAUDRATE 115200 |
| |
| /* |
| * Bootloader Components Configuration |
| */ |
| #define CONFIG_CMD_ENV |
| |
| /* I2C support */ |
| #ifdef CONFIG_SYS_I2C |
| #define CONFIG_SYS_I2C_PXA |
| #define CONFIG_PXA_STD_I2C |
| #define CONFIG_PXA_PWR_I2C |
| #define CONFIG_SYS_I2C_SPEED 100000 |
| #endif |
| |
| /* LCD support */ |
| #ifdef CONFIG_LCD |
| #define CONFIG_PXA_LCD |
| #define CONFIG_PXA_VGA |
| #define CONFIG_SYS_WHITE_ON_BLACK |
| #define CONFIG_CMD_BMP |
| #define CONFIG_LCD_LOGO |
| #endif |
| |
| /* |
| * Networking Configuration |
| */ |
| #ifdef CONFIG_CMD_NET |
| |
| #define CONFIG_DRIVER_DM9000 1 |
| #define CONFIG_DM9000_BASE 0x08000000 |
| #define DM9000_IO (CONFIG_DM9000_BASE) |
| #define DM9000_DATA (CONFIG_DM9000_BASE + 4) |
| #define CONFIG_NET_RETRY_COUNT 10 |
| |
| #define CONFIG_BOOTP_BOOTFILESIZE |
| #define CONFIG_BOOTP_BOOTPATH |
| #define CONFIG_BOOTP_GATEWAY |
| #define CONFIG_BOOTP_HOSTNAME |
| #endif |
| |
| #undef CONFIG_SYS_LONGHELP /* Saves 10 KB */ |
| #define CONFIG_SYS_CBSIZE 256 |
| #define CONFIG_SYS_PBSIZE \ |
| (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) |
| #define CONFIG_SYS_MAXARGS 16 |
| #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE |
| #define CONFIG_SYS_DEVICE_NULLDEV 1 |
| #undef CONFIG_CMDLINE_EDITING /* Saves 2.5 KB */ |
| #undef CONFIG_AUTO_COMPLETE /* Saves 2.5 KB */ |
| |
| /* |
| * Clock Configuration |
| */ |
| #define CONFIG_SYS_CPUSPEED 0x290 /* 520MHz */ |
| |
| /* |
| * DRAM Map |
| */ |
| #define CONFIG_NR_DRAM_BANKS 1 /* We have 1 bank of DRAM */ |
| #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ |
| #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ |
| |
| #define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */ |
| #define CONFIG_SYS_DRAM_SIZE 0x04000000 /* 64 MB DRAM */ |
| |
| #define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ |
| #define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ |
| |
| #define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM_1 |
| #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 |
| #define CONFIG_SYS_INIT_SP_ADDR 0x5c010000 |
| |
| /* |
| * NOR FLASH |
| */ |
| #ifdef CONFIG_CMD_FLASH |
| #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ |
| #define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */ |
| #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 |
| |
| #define CONFIG_SYS_FLASH_CFI |
| #define CONFIG_FLASH_CFI_DRIVER 1 |
| #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_32BIT |
| |
| #define CONFIG_SYS_MAX_FLASH_SECT (4 + 255) |
| #define CONFIG_SYS_MAX_FLASH_BANKS 1 |
| |
| #define CONFIG_SYS_FLASH_ERASE_TOUT (25 * CONFIG_SYS_HZ) |
| #define CONFIG_SYS_FLASH_WRITE_TOUT (25 * CONFIG_SYS_HZ) |
| #define CONFIG_SYS_FLASH_LOCK_TOUT (25 * CONFIG_SYS_HZ) |
| #define CONFIG_SYS_FLASH_UNLOCK_TOUT (25 * CONFIG_SYS_HZ) |
| |
| #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 |
| #define CONFIG_SYS_FLASH_PROTECTION 1 |
| |
| #define CONFIG_ENV_IS_IN_FLASH 1 |
| |
| #else /* No flash */ |
| #define CONFIG_ENV_IS_NOWHERE |
| #endif |
| |
| #define CONFIG_SYS_MONITOR_BASE 0x0 |
| #define CONFIG_SYS_MONITOR_LEN 0x40000 |
| |
| /* Skip factory configuration block */ |
| #define CONFIG_ENV_ADDR \ |
| (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN + 0x40000) |
| #define CONFIG_ENV_SIZE 0x40000 |
| #define CONFIG_ENV_SECT_SIZE 0x40000 |
| |
| /* |
| * GPIO settings |
| */ |
| #define CONFIG_SYS_GPSR0_VAL 0x00000000 |
| #define CONFIG_SYS_GPSR1_VAL 0x00020000 |
| #define CONFIG_SYS_GPSR2_VAL 0x0002c000 |
| #define CONFIG_SYS_GPSR3_VAL 0x00000000 |
| |
| #define CONFIG_SYS_GPCR0_VAL 0x00000000 |
| #define CONFIG_SYS_GPCR1_VAL 0x00000000 |
| #define CONFIG_SYS_GPCR2_VAL 0x00000000 |
| #define CONFIG_SYS_GPCR3_VAL 0x00000000 |
| |
| #define CONFIG_SYS_GPDR0_VAL 0xc8008000 |
| #define CONFIG_SYS_GPDR1_VAL 0xfc02a981 |
| #define CONFIG_SYS_GPDR2_VAL 0x92c3ffff |
| #define CONFIG_SYS_GPDR3_VAL 0x0061e804 |
| |
| #define CONFIG_SYS_GAFR0_L_VAL 0x80100000 |
| #define CONFIG_SYS_GAFR0_U_VAL 0xa5c00010 |
| #define CONFIG_SYS_GAFR1_L_VAL 0x6992901a |
| #define CONFIG_SYS_GAFR1_U_VAL 0xaaa50008 |
| #define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa |
| #define CONFIG_SYS_GAFR2_U_VAL 0x4109a002 |
| #define CONFIG_SYS_GAFR3_L_VAL 0x54000310 |
| #define CONFIG_SYS_GAFR3_U_VAL 0x00005401 |
| |
| #define CONFIG_SYS_PSSR_VAL 0x30 |
| |
| /* |
| * Clock settings |
| */ |
| #define CONFIG_SYS_CKEN 0x00500240 |
| #define CONFIG_SYS_CCCR 0x02000290 |
| |
| /* |
| * Memory settings |
| */ |
| #define CONFIG_SYS_MSC0_VAL 0x9ee1c5f2 |
| #define CONFIG_SYS_MSC1_VAL 0x9ee1f994 |
| #define CONFIG_SYS_MSC2_VAL 0x9ee19ee1 |
| #define CONFIG_SYS_MDCNFG_VAL 0x090009c9 |
| #define CONFIG_SYS_MDREFR_VAL 0x2003a031 |
| #define CONFIG_SYS_MDMRS_VAL 0x00220022 |
| #define CONFIG_SYS_FLYCNFG_VAL 0x00010001 |
| #define CONFIG_SYS_SXCNFG_VAL 0x40044004 |
| |
| /* |
| * PCMCIA and CF Interfaces |
| */ |
| #define CONFIG_SYS_MECR_VAL 0x00000000 |
| #define CONFIG_SYS_MCMEM0_VAL 0x00028307 |
| #define CONFIG_SYS_MCMEM1_VAL 0x00014307 |
| #define CONFIG_SYS_MCATT0_VAL 0x00038787 |
| #define CONFIG_SYS_MCATT1_VAL 0x0001c787 |
| #define CONFIG_SYS_MCIO0_VAL 0x0002830f |
| #define CONFIG_SYS_MCIO1_VAL 0x0001430f |
| |
| #include "pxa-common.h" |
| |
| #endif /* __CONFIG_H */ |
