| /* |
| * (C) Copyright 2008, 2009 |
| * Andreas Pfefferle, DENX Software Engineering, ap@denx.de. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <asm/io.h> |
| #include <common.h> |
| #include <command.h> |
| #include <config.h> |
| #include <rtc.h> |
| #include <tws.h> |
| |
| #if defined(CONFIG_CMD_DATE) |
| |
| /* |
| * Note: The acrobatics below is due to the hideously ingenius idea of |
| * the chip designers. As the chip does not allow register |
| * addressing, all values need to be read and written in one go. Sure |
| * enough, the 'wday' field (0-6) is transferred using the economic |
| * number of 4 bits right in the middle of the packet..... |
| */ |
| |
| int rtc_get(struct rtc_time *tm) |
| { |
| int rel = 0; |
| uchar buffer[7]; |
| |
| memset(buffer, 0, 7); |
| |
| /* Read 52 bits into our buffer */ |
| tws_read(buffer, 52); |
| |
| tm->tm_sec = bcd2bin( buffer[0] & 0x7F); |
| tm->tm_min = bcd2bin( buffer[1] & 0x7F); |
| tm->tm_hour = bcd2bin( buffer[2] & 0x3F); |
| tm->tm_wday = bcd2bin( buffer[3] & 0x07); |
| tm->tm_mday = bcd2bin((buffer[3] & 0xF0) >> 4 | (buffer[4] & 0x0F) << 4); |
| tm->tm_mon = bcd2bin((buffer[4] & 0x30) >> 4 | (buffer[5] & 0x0F) << 4); |
| tm->tm_year = bcd2bin((buffer[5] & 0xF0) >> 4 | (buffer[6] & 0x0F) << 4) + 2000; |
| tm->tm_yday = 0; |
| tm->tm_isdst = 0; |
| |
| if (tm->tm_sec & 0x80) { |
| puts("### Warning: RTC Low Voltage - date/time not reliable\n"); |
| rel = -1; |
| } |
| |
| debug("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", |
| tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday, |
| tm->tm_hour, tm->tm_min, tm->tm_sec); |
| |
| return rel; |
| } |
| |
| int rtc_set(struct rtc_time *tm) |
| { |
| uchar buffer[7]; |
| uchar tmp; |
| |
| debug("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", |
| tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday, |
| tm->tm_hour, tm->tm_min, tm->tm_sec); |
| |
| memset(buffer, 0, 7); |
| buffer[0] = bin2bcd(tm->tm_sec); |
| buffer[1] = bin2bcd(tm->tm_min); |
| buffer[2] = bin2bcd(tm->tm_hour); |
| buffer[3] = bin2bcd(tm->tm_wday); |
| tmp = bin2bcd(tm->tm_mday); |
| buffer[3] |= (tmp & 0x0F) << 4; |
| buffer[4] = (tmp & 0xF0) >> 4; |
| tmp = bin2bcd(tm->tm_mon); |
| buffer[4] |= (tmp & 0x0F) << 4; |
| buffer[5] = (tmp & 0xF0) >> 4; |
| tmp = bin2bcd(tm->tm_year % 100); |
| buffer[5] |= (tmp & 0x0F) << 4; |
| buffer[6] = (tmp & 0xF0) >> 4; |
| |
| /* Write the resulting 52 bits to device */ |
| tws_write(buffer, 52); |
| |
| return 0; |
| } |
| |
| void rtc_reset(void) |
| { |
| struct rtc_time tmp; |
| |
| tmp.tm_sec = 0; |
| tmp.tm_min = 0; |
| tmp.tm_hour = 0; |
| tmp.tm_wday = 4; |
| tmp.tm_mday = 1; |
| tmp.tm_mon = 1; |
| tmp.tm_year = 2000; |
| rtc_set(&tmp); |
| } |
| |
| #endif |