| /* |
| * keystone2: commands for clocks |
| * |
| * (C) Copyright 2012-2014 |
| * Texas Instruments Incorporated, <www.ti.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <asm/arch/hardware.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/psc_defs.h> |
| |
| struct pll_init_data cmd_pll_data = { |
| .pll = MAIN_PLL, |
| .pll_m = 16, |
| .pll_d = 1, |
| .pll_od = 2, |
| }; |
| |
| int do_pll_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| if (argc != 5) |
| goto pll_cmd_usage; |
| |
| if (strncmp(argv[1], "pa", 2) == 0) |
| cmd_pll_data.pll = PASS_PLL; |
| #ifndef CONFIG_SOC_K2E |
| else if (strncmp(argv[1], "arm", 3) == 0) |
| cmd_pll_data.pll = TETRIS_PLL; |
| #endif |
| #ifdef CONFIG_SOC_K2HK |
| else if (strncmp(argv[1], "ddr3a", 5) == 0) |
| cmd_pll_data.pll = DDR3A_PLL; |
| else if (strncmp(argv[1], "ddr3b", 5) == 0) |
| cmd_pll_data.pll = DDR3B_PLL; |
| #else |
| else if (strncmp(argv[1], "ddr3", 4) == 0) |
| cmd_pll_data.pll = DDR3_PLL; |
| #endif |
| else |
| goto pll_cmd_usage; |
| |
| cmd_pll_data.pll_m = simple_strtoul(argv[2], NULL, 10); |
| cmd_pll_data.pll_d = simple_strtoul(argv[3], NULL, 10); |
| cmd_pll_data.pll_od = simple_strtoul(argv[4], NULL, 10); |
| |
| printf("Trying to set pll %d; mult %d; div %d; OD %d\n", |
| cmd_pll_data.pll, cmd_pll_data.pll_m, |
| cmd_pll_data.pll_d, cmd_pll_data.pll_od); |
| init_pll(&cmd_pll_data); |
| |
| return 0; |
| |
| pll_cmd_usage: |
| return cmd_usage(cmdtp); |
| } |
| |
| U_BOOT_CMD( |
| pllset, 5, 0, do_pll_cmd, |
| "set pll multiplier and pre divider", |
| PLLSET_CMD_LIST " <mult> <div> <OD>\n" |
| ); |
| |
| int do_getclk_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| unsigned int clk; |
| unsigned long freq; |
| |
| if (argc != 2) |
| goto getclk_cmd_usage; |
| |
| clk = simple_strtoul(argv[1], NULL, 10); |
| |
| freq = ks_clk_get_rate(clk); |
| if (freq) |
| printf("clock index [%d] - frequency %lu\n", clk, freq); |
| else |
| printf("clock index [%d] Not available\n", clk); |
| return 0; |
| |
| getclk_cmd_usage: |
| return cmd_usage(cmdtp); |
| } |
| |
| U_BOOT_CMD( |
| getclk, 2, 0, do_getclk_cmd, |
| "get clock rate", |
| "<clk index>\n" |
| "The indexes for clocks:\n" |
| CLOCK_INDEXES_LIST |
| ); |
| |
| int do_psc_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| int psc_module; |
| int res; |
| |
| if (argc != 3) |
| goto psc_cmd_usage; |
| |
| psc_module = simple_strtoul(argv[1], NULL, 10); |
| if (strcmp(argv[2], "en") == 0) { |
| res = psc_enable_module(psc_module); |
| printf("psc_enable_module(%d) - %s\n", psc_module, |
| (res) ? "ERROR" : "OK"); |
| return 0; |
| } |
| |
| if (strcmp(argv[2], "di") == 0) { |
| res = psc_disable_module(psc_module); |
| printf("psc_disable_module(%d) - %s\n", psc_module, |
| (res) ? "ERROR" : "OK"); |
| return 0; |
| } |
| |
| if (strcmp(argv[2], "domain") == 0) { |
| res = psc_disable_domain(psc_module); |
| printf("psc_disable_domain(%d) - %s\n", psc_module, |
| (res) ? "ERROR" : "OK"); |
| return 0; |
| } |
| |
| psc_cmd_usage: |
| return cmd_usage(cmdtp); |
| } |
| |
| U_BOOT_CMD( |
| psc, 3, 0, do_psc_cmd, |
| "<enable/disable psc module os disable domain>", |
| "<mod/domain index> <en|di|domain>\n" |
| "Intended to control Power and Sleep Controller (PSC) domains and\n" |
| "modules. The module or domain index exectly corresponds to ones\n" |
| "listed in official TRM. For instance, to enable MSMC RAM clock\n" |
| "domain use command: psc 14 en.\n" |
| ); |