| /* |
| * (C) Copyright 2012 |
| * eInfochips Ltd. <www.einfochips.com> |
| * Written-by: Ajay Bhargav <contact@8051projects.net> |
| * |
| * (C) Copyright 2009 |
| * Marvell Semiconductor <www.marvell.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef __UTMI_ARMADA100__ |
| #define __UTMI_ARMADA100__ |
| |
| #define UTMI_PHY_BASE 0xD4206000 |
| |
| /* utmi_ctrl - bits */ |
| #define INPKT_DELAY_SOF (1 << 28) |
| #define PLL_PWR_UP 2 |
| #define PHY_PWR_UP 1 |
| |
| /* utmi_pll - bits */ |
| #define PLL_FBDIV_MASK 0x00000FF0 |
| #define PLL_FBDIV 4 |
| #define PLL_REFDIV_MASK 0x0000000F |
| #define PLL_REFDIV 0 |
| #define PLL_READY 0x800000 |
| #define VCOCAL_START (1 << 21) |
| |
| #define N_DIVIDER 0xEE |
| #define M_DIVIDER 0x0B |
| |
| /* utmi_tx - bits */ |
| #define CK60_PHSEL 17 |
| #define PHSEL_VAL 0x4 |
| #define RCAL_START (1 << 12) |
| |
| /* |
| * USB PHY registers |
| * Refer Datasheet Appendix A.21 |
| */ |
| struct armd1usb_phy_reg { |
| u32 utmi_rev; /* USB PHY Revision */ |
| u32 utmi_ctrl; /* USB PHY Control register */ |
| u32 utmi_pll; /* PLL register */ |
| u32 utmi_tx; /* Tx register */ |
| u32 utmi_rx; /* Rx register */ |
| u32 utmi_ivref; /* IVREF register */ |
| u32 utmi_tst_g0; /* Test group 0 register */ |
| u32 utmi_tst_g1; /* Test group 1 register */ |
| u32 utmi_tst_g2; /* Test group 2 register */ |
| u32 utmi_tst_g3; /* Test group 3 register */ |
| u32 utmi_tst_g4; /* Test group 4 register */ |
| u32 utmi_tst_g5; /* Test group 5 register */ |
| u32 utmi_reserve; /* Reserve Register */ |
| u32 utmi_usb_int; /* USB interuppt register */ |
| u32 utmi_dbg_ctl; /* Debug control register */ |
| u32 utmi_otg_addon; /* OTG addon register */ |
| }; |
| |
| int utmi_init(void); |
| |
| #endif /* __UTMI_ARMADA100__ */ |
