| /* |
| * Copyright (C) 2011-2012 |
| * Gerald Kerma <dreagle@doukki.net> |
| * Luka Perkov <luka@openwrt.org> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef _CONFIG_IB62x0_H |
| #define _CONFIG_IB62x0_H |
| |
| /* |
| * High level configuration options |
| */ |
| #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ |
| #define CONFIG_KW88F6281 /* SOC Name */ |
| #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ |
| |
| /* Add target to build it automatically upon "make" */ |
| #define CONFIG_BUILD_TARGET "u-boot.kwb" |
| |
| /* |
| * Compression configuration |
| */ |
| #define CONFIG_BZIP2 |
| #define CONFIG_LZMA |
| |
| /* |
| * Commands configuration |
| */ |
| #define CONFIG_SYS_MVFS |
| #define CONFIG_CMD_IDE |
| |
| /* |
| * mv-common.h should be defined after CMD configs since it used them |
| * to enable certain macros |
| */ |
| #include "mv-common.h" |
| |
| /* |
| * Environment variables configuration |
| */ |
| #ifdef CONFIG_CMD_NAND |
| #define CONFIG_ENV_IS_IN_NAND |
| #define CONFIG_ENV_SECT_SIZE 0x20000 |
| #else |
| #define CONFIG_ENV_IS_NOWHERE |
| #endif |
| #define CONFIG_ENV_SIZE 0x20000 |
| #define CONFIG_ENV_OFFSET 0xe0000 |
| |
| /* |
| * Default environment variables |
| */ |
| #define CONFIG_BOOTCOMMAND \ |
| "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ |
| "ubi part root; " \ |
| "ubifsmount ubi:rootfs; " \ |
| "ubifsload 0x800000 ${kernel}; " \ |
| "ubifsload 0x700000 ${fdt}; " \ |
| "ubifsumount; " \ |
| "fdt addr 0x700000; fdt resize; fdt chosen; " \ |
| "bootz 0x800000 - 0x700000" |
| |
| #define CONFIG_MTDPARTS \ |
| "mtdparts=orion_nand:" \ |
| "0xe0000@0x0(uboot)," \ |
| "0x20000@0xe0000(uboot_env)," \ |
| "-@0x100000(root)\0" |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "console=console=ttyS0,115200\0" \ |
| "mtdids=nand0=orion_nand\0" \ |
| "mtdparts="CONFIG_MTDPARTS \ |
| "kernel=/boot/zImage\0" \ |
| "fdt=/boot/ib62x0.dtb\0" \ |
| "bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rw\0" |
| |
| /* |
| * Ethernet driver configuration |
| */ |
| #ifdef CONFIG_CMD_NET |
| #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ |
| #define CONFIG_PHY_BASE_ADR 0 |
| #undef CONFIG_RESET_PHY_R |
| #endif /* CONFIG_CMD_NET */ |
| |
| /* |
| * SATA driver configuration |
| */ |
| #ifdef CONFIG_CMD_IDE |
| #define __io |
| #define CONFIG_IDE_PREINIT |
| #define CONFIG_MVSATA_IDE_USE_PORT0 |
| #define CONFIG_MVSATA_IDE_USE_PORT1 |
| #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET |
| #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET |
| #endif /* CONFIG_CMD_IDE */ |
| |
| /* |
| * RTC driver configuration |
| */ |
| #ifdef CONFIG_CMD_DATE |
| #define CONFIG_RTC_MV |
| #endif /* CONFIG_CMD_DATE */ |
| |
| #endif /* _CONFIG_IB62x0_H */ |