| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Driver for DS-2502 One wire "Add only Memory". |
| * |
| * The chip has 4 pages of 32 bytes. |
| * In addition it has 8 out of band status bytes that are used, by software, |
| * as page redirection bytes by an algorithm described in the data sheet. |
| * This is useful since data cannot be erased once written but it can be |
| * "patched" up to four times by switching pages. |
| * |
| * So, when a read request is entirely in the first page automatically |
| * apply the page redirection bytes (which allows the device to be seen as |
| * a 32 byte PROM, writable 4 times). |
| * |
| * If the read request is outside of or larger than the first page then read |
| * the raw data (which allows the device to be seen as a 128 byte PROM, |
| * writable once). |
| * |
| * Copyright (c) 2018 Flowbird |
| * Martin Fuzzey <martin.fuzzey@flowbird.group> |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <linux/err.h> |
| #include <w1-eeprom.h> |
| #include <w1.h> |
| |
| #define DS2502_PAGE_SIZE 32 |
| #define DS2502_PAGE_COUNT 4 |
| #define DS2502_STATUS_SIZE 8 |
| |
| #define DS2502_CMD_READ_STATUS 0xAA |
| #define DS2502_CMD_READ_GEN_CRC 0xC3 |
| |
| /* u-boot crc8() is CCITT CRC8, we need x^8 + x^5 + x^4 + 1 LSB first */ |
| static unsigned int ds2502_crc8(const u8 *buf, int len) |
| { |
| static const u8 poly = 0x8C; /* (1 + x^4 + x^5) + x^8 */ |
| u8 crc = 0; |
| int i; |
| |
| for (i = 0; i < len; i++) { |
| u8 data = buf[i]; |
| int j; |
| |
| for (j = 0; j < 8; j++) { |
| u8 mix = (crc ^ data) & 1; |
| |
| crc >>= 1; |
| if (mix) |
| crc ^= poly; |
| data >>= 1; |
| } |
| } |
| return crc; |
| } |
| |
| static int ds2502_read(struct udevice *dev, u8 cmd, |
| int bytes_in_page, int pos, |
| u8 *buf, int bytes_for_user) |
| { |
| int retry; |
| int ret = 0; |
| |
| for (retry = 0; retry < 3; retry++) { |
| u8 pagebuf[DS2502_PAGE_SIZE + 1]; /* 1 byte for CRC8 */ |
| u8 crc; |
| int i; |
| |
| ret = w1_reset_select(dev); |
| if (ret) |
| return ret; |
| |
| /* send read to end of page and generate CRC command */ |
| pagebuf[0] = cmd; |
| pagebuf[1] = pos & 0xff; |
| pagebuf[2] = pos >> 8; |
| crc = ds2502_crc8(pagebuf, 3); |
| for (i = 0; i < 3; i++) |
| w1_write_byte(dev, pagebuf[i]); |
| |
| /* Check command CRC */ |
| ret = w1_read_byte(dev); |
| if (ret < 0) { |
| dev_dbg(dev, "Error %d reading command CRC\n", ret); |
| continue; |
| } |
| |
| if (ret != crc) { |
| dev_dbg(dev, |
| "bad CRC8 for cmd %02x got=%02X exp=%02X\n", |
| cmd, ret, crc); |
| ret = -EIO; |
| continue; |
| } |
| |
| /* read data and check CRC */ |
| ret = w1_read_buf(dev, pagebuf, bytes_in_page + 1); |
| if (ret < 0) { |
| dev_dbg(dev, "Error %d reading data\n", ret); |
| continue; |
| } |
| |
| crc = ds2502_crc8(pagebuf, bytes_in_page); |
| if (crc == pagebuf[bytes_in_page]) { |
| memcpy(buf, pagebuf, bytes_for_user); |
| ret = 0; |
| break; |
| } |
| dev_dbg(dev, "Bad CRC8 got=%02X exp=%02X pos=%04X\n", |
| pagebuf[bytes_in_page], crc, pos); |
| ret = -EIO; |
| } |
| |
| return ret; |
| } |
| |
| static inline int ds2502_read_status_bytes(struct udevice *dev, u8 *buf) |
| { |
| return ds2502_read(dev, DS2502_CMD_READ_STATUS, |
| DS2502_STATUS_SIZE, 0, |
| buf, DS2502_STATUS_SIZE); |
| } |
| |
| /* |
| * Status bytes (from index 1) contain 1's complement page indirection |
| * So for N writes: |
| * N=1: ff ff ff ff ff ff ff 00 |
| * N=2: ff fe ff ff ff ff ff 00 |
| * N=3: ff fe fd ff ff ff ff 00 |
| * N=4: ff fe fd fc ff ff ff 00 |
| */ |
| static int ds2502_indirect_page(struct udevice *dev, u8 *status, int page) |
| { |
| int page_seen = 0; |
| |
| do { |
| u8 sb = status[page + 1]; |
| |
| if (sb == 0xff) |
| break; |
| |
| page = ~sb & 0xff; |
| |
| if (page >= DS2502_PAGE_COUNT) { |
| dev_err(dev, |
| "Illegal page redirection status byte %02x\n", |
| sb); |
| return -EINVAL; |
| } |
| |
| if (page_seen & (1 << page)) { |
| dev_err(dev, "Infinite loop in page redirection\n"); |
| return -EINVAL; |
| } |
| |
| page_seen |= (1 << page); |
| } while (1); |
| |
| return page; |
| } |
| |
| static int ds2502_read_buf(struct udevice *dev, unsigned int offset, |
| u8 *buf, unsigned int count) |
| { |
| unsigned int min_page = offset / DS2502_PAGE_SIZE; |
| unsigned int max_page = (offset + count - 1) / DS2502_PAGE_SIZE; |
| int xfered = 0; |
| u8 status_bytes[DS2502_STATUS_SIZE]; |
| int i; |
| int ret; |
| |
| if (min_page >= DS2502_PAGE_COUNT || max_page >= DS2502_PAGE_COUNT) |
| return -EINVAL; |
| |
| if (min_page == 0 && max_page == 0) { |
| ret = ds2502_read_status_bytes(dev, status_bytes); |
| if (ret) |
| return ret; |
| } else { |
| /* Dummy one to one page redirection */ |
| memset(status_bytes, 0xff, sizeof(status_bytes)); |
| } |
| |
| for (i = min_page; i <= max_page; i++) { |
| int page; |
| int pos; |
| int bytes_in_page; |
| int bytes_for_user; |
| |
| page = ds2502_indirect_page(dev, status_bytes, i); |
| if (page < 0) |
| return page; |
| dev_dbg(dev, "page logical %d => physical %d\n", i, page); |
| |
| pos = page * DS2502_PAGE_SIZE; |
| if (i == min_page) |
| pos += offset % DS2502_PAGE_SIZE; |
| |
| bytes_in_page = DS2502_PAGE_SIZE - (pos % DS2502_PAGE_SIZE); |
| |
| if (i == max_page) |
| bytes_for_user = count - xfered; |
| else |
| bytes_for_user = bytes_in_page; |
| |
| ret = ds2502_read(dev, DS2502_CMD_READ_GEN_CRC, |
| bytes_in_page, pos, |
| &buf[xfered], bytes_for_user); |
| if (ret < 0) |
| return ret; |
| |
| xfered += bytes_for_user; |
| } |
| |
| return 0; |
| } |
| |
| static int ds2502_probe(struct udevice *dev) |
| { |
| struct w1_device *w1; |
| |
| w1 = dev_get_parent_platdata(dev); |
| w1->id = 0; |
| return 0; |
| } |
| |
| static const struct w1_eeprom_ops ds2502_ops = { |
| .read_buf = ds2502_read_buf, |
| }; |
| |
| static const struct udevice_id ds2502_id[] = { |
| { .compatible = "maxim,ds2502", .data = W1_FAMILY_DS2502 }, |
| { }, |
| }; |
| |
| U_BOOT_DRIVER(ds2502) = { |
| .name = "ds2502", |
| .id = UCLASS_W1_EEPROM, |
| .of_match = ds2502_id, |
| .ops = &ds2502_ops, |
| .probe = ds2502_probe, |
| }; |