| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (c) 2016-2018, NVIDIA CORPORATION. |
| */ |
| |
| #include <stdlib.h> |
| #include <common.h> |
| #include <fdt_support.h> |
| #include <fdtdec.h> |
| #include <asm/arch/tegra.h> |
| #include <asm/armv8/mmu.h> |
| |
| extern unsigned long nvtboot_boot_x0; |
| |
| /* |
| * The following few functions run late during the boot process and dynamically |
| * calculate the load address of various binaries. To keep track of multiple |
| * allocations, some writable list of RAM banks must be used. tegra_mem_map[] |
| * is used for this purpose to avoid making yet another copy of the list of RAM |
| * banks. This is safe because tegra_mem_map[] is only used once during very |
| * early boot to create U-Boot's page tables, long before this code runs. If |
| * this assumption becomes invalid later, we can just fix the code to copy the |
| * list of RAM banks into some private data structure before running. |
| */ |
| |
| extern struct mm_region tegra_mem_map[]; |
| |
| static char *gen_varname(const char *var, const char *ext) |
| { |
| size_t len_var = strlen(var); |
| size_t len_ext = strlen(ext); |
| size_t len = len_var + len_ext + 1; |
| char *varext = malloc(len); |
| |
| if (!varext) |
| return 0; |
| strcpy(varext, var); |
| strcpy(varext + len_var, ext); |
| return varext; |
| } |
| |
| static void mark_ram_allocated(int bank, u64 allocated_start, u64 allocated_end) |
| { |
| u64 bank_start = tegra_mem_map[bank].virt; |
| u64 bank_size = tegra_mem_map[bank].size; |
| u64 bank_end = bank_start + bank_size; |
| bool keep_front = allocated_start != bank_start; |
| bool keep_tail = allocated_end != bank_end; |
| |
| if (keep_front && keep_tail) { |
| /* |
| * There are CONFIG_NR_DRAM_BANKS DRAM entries in the array, |
| * starting at index 1 (index 0 is MMIO). So, we are at DRAM |
| * entry "bank" not "bank - 1" as for a typical 0-base array. |
| * The number of remaining DRAM entries is therefore |
| * "CONFIG_NR_DRAM_BANKS - bank". We want to duplicate the |
| * current entry and shift up the remaining entries, dropping |
| * the last one. Thus, we must copy one fewer entry than the |
| * number remaining. |
| */ |
| memmove(&tegra_mem_map[bank + 1], &tegra_mem_map[bank], |
| CONFIG_NR_DRAM_BANKS - bank - 1); |
| tegra_mem_map[bank].size = allocated_start - bank_start; |
| bank++; |
| tegra_mem_map[bank].virt = allocated_end; |
| tegra_mem_map[bank].phys = allocated_end; |
| tegra_mem_map[bank].size = bank_end - allocated_end; |
| } else if (keep_front) { |
| tegra_mem_map[bank].size = allocated_start - bank_start; |
| } else if (keep_tail) { |
| tegra_mem_map[bank].virt = allocated_end; |
| tegra_mem_map[bank].phys = allocated_end; |
| tegra_mem_map[bank].size = bank_end - allocated_end; |
| } else { |
| /* |
| * We could move all subsequent banks down in the array but |
| * that's not necessary for subsequent allocations to work, so |
| * we skip doing so. |
| */ |
| tegra_mem_map[bank].size = 0; |
| } |
| } |
| |
| static void reserve_ram(u64 start, u64 size) |
| { |
| int bank; |
| u64 end = start + size; |
| |
| for (bank = 1; bank <= CONFIG_NR_DRAM_BANKS; bank++) { |
| u64 bank_start = tegra_mem_map[bank].virt; |
| u64 bank_size = tegra_mem_map[bank].size; |
| u64 bank_end = bank_start + bank_size; |
| |
| if (end <= bank_start || start > bank_end) |
| continue; |
| mark_ram_allocated(bank, start, end); |
| break; |
| } |
| } |
| |
| static u64 alloc_ram(u64 size, u64 align, u64 offset) |
| { |
| int bank; |
| |
| for (bank = 1; bank <= CONFIG_NR_DRAM_BANKS; bank++) { |
| u64 bank_start = tegra_mem_map[bank].virt; |
| u64 bank_size = tegra_mem_map[bank].size; |
| u64 bank_end = bank_start + bank_size; |
| u64 allocated = ROUND(bank_start, align) + offset; |
| u64 allocated_end = allocated + size; |
| |
| if (allocated_end > bank_end) |
| continue; |
| mark_ram_allocated(bank, allocated, allocated_end); |
| return allocated; |
| } |
| return 0; |
| } |
| |
| static void set_calculated_aliases(char *aliases, u64 address) |
| { |
| char *tmp, *alias; |
| int err; |
| |
| aliases = strdup(aliases); |
| if (!aliases) { |
| pr_err("strdup(aliases) failed"); |
| return; |
| } |
| |
| tmp = aliases; |
| while (true) { |
| alias = strsep(&tmp, " "); |
| if (!alias) |
| break; |
| debug("%s: alias: %s\n", __func__, alias); |
| err = env_set_hex(alias, address); |
| if (err) |
| pr_err("Could not set %s\n", alias); |
| } |
| |
| free(aliases); |
| } |
| |
| static void set_calculated_env_var(const char *var) |
| { |
| char *var_size; |
| char *var_align; |
| char *var_offset; |
| char *var_aliases; |
| u64 size; |
| u64 align; |
| u64 offset; |
| char *aliases; |
| u64 address; |
| int err; |
| |
| var_size = gen_varname(var, "_size"); |
| if (!var_size) |
| return; |
| var_align = gen_varname(var, "_align"); |
| if (!var_align) |
| goto out_free_var_size; |
| var_offset = gen_varname(var, "_offset"); |
| if (!var_offset) |
| goto out_free_var_align; |
| var_aliases = gen_varname(var, "_aliases"); |
| if (!var_aliases) |
| goto out_free_var_offset; |
| |
| size = env_get_hex(var_size, 0); |
| if (!size) { |
| pr_err("%s not set or zero\n", var_size); |
| goto out_free_var_aliases; |
| } |
| align = env_get_hex(var_align, 1); |
| /* Handle extant variables, but with a value of 0 */ |
| if (!align) |
| align = 1; |
| offset = env_get_hex(var_offset, 0); |
| aliases = env_get(var_aliases); |
| |
| debug("%s: Calc var %s; size=%llx, align=%llx, offset=%llx\n", |
| __func__, var, size, align, offset); |
| if (aliases) |
| debug("%s: Aliases: %s\n", __func__, aliases); |
| |
| address = alloc_ram(size, align, offset); |
| if (!address) { |
| pr_err("Could not allocate %s\n", var); |
| goto out_free_var_aliases; |
| } |
| debug("%s: Address %llx\n", __func__, address); |
| |
| err = env_set_hex(var, address); |
| if (err) |
| pr_err("Could not set %s\n", var); |
| if (aliases) |
| set_calculated_aliases(aliases, address); |
| |
| out_free_var_aliases: |
| free(var_aliases); |
| out_free_var_offset: |
| free(var_offset); |
| out_free_var_align: |
| free(var_align); |
| out_free_var_size: |
| free(var_size); |
| } |
| |
| #ifdef DEBUG |
| static void dump_ram_banks(void) |
| { |
| int bank; |
| |
| for (bank = 1; bank <= CONFIG_NR_DRAM_BANKS; bank++) { |
| u64 bank_start = tegra_mem_map[bank].virt; |
| u64 bank_size = tegra_mem_map[bank].size; |
| u64 bank_end = bank_start + bank_size; |
| |
| if (!bank_size) |
| continue; |
| printf("%d: %010llx..%010llx (+%010llx)\n", bank - 1, |
| bank_start, bank_end, bank_size); |
| } |
| } |
| #endif |
| |
| static void set_calculated_env_vars(void) |
| { |
| char *vars, *tmp, *var; |
| |
| #ifdef DEBUG |
| printf("RAM banks before any calculated env. var.s:\n"); |
| dump_ram_banks(); |
| #endif |
| |
| reserve_ram(nvtboot_boot_x0, fdt_totalsize(nvtboot_boot_x0)); |
| |
| #ifdef DEBUG |
| printf("RAM after reserving cboot DTB:\n"); |
| dump_ram_banks(); |
| #endif |
| |
| vars = env_get("calculated_vars"); |
| if (!vars) { |
| debug("%s: No env var calculated_vars\n", __func__); |
| return; |
| } |
| |
| vars = strdup(vars); |
| if (!vars) { |
| pr_err("strdup(calculated_vars) failed"); |
| return; |
| } |
| |
| tmp = vars; |
| while (true) { |
| var = strsep(&tmp, " "); |
| if (!var) |
| break; |
| debug("%s: var: %s\n", __func__, var); |
| set_calculated_env_var(var); |
| #ifdef DEBUG |
| printf("RAM banks affter allocating %s:\n", var); |
| dump_ram_banks(); |
| #endif |
| } |
| |
| free(vars); |
| } |
| |
| static int set_fdt_addr(void) |
| { |
| int ret; |
| |
| ret = env_set_hex("fdt_addr", nvtboot_boot_x0); |
| if (ret) { |
| printf("Failed to set fdt_addr to point at DTB: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Attempt to use /chosen/nvidia,ether-mac in the nvtboot DTB to U-Boot's |
| * ethaddr environment variable if possible. |
| */ |
| static int set_ethaddr_from_nvtboot(void) |
| { |
| const void *nvtboot_blob = (void *)nvtboot_boot_x0; |
| int ret, node, len; |
| const u32 *prop; |
| |
| /* Already a valid address in the environment? If so, keep it */ |
| if (env_get("ethaddr")) |
| return 0; |
| |
| node = fdt_path_offset(nvtboot_blob, "/chosen"); |
| if (node < 0) { |
| printf("Can't find /chosen node in nvtboot DTB\n"); |
| return node; |
| } |
| prop = fdt_getprop(nvtboot_blob, node, "nvidia,ether-mac", &len); |
| if (!prop) { |
| printf("Can't find nvidia,ether-mac property in nvtboot DTB\n"); |
| return -ENOENT; |
| } |
| |
| ret = env_set("ethaddr", (void *)prop); |
| if (ret) { |
| printf("Failed to set ethaddr from nvtboot DTB: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| int tegra_soc_board_init_late(void) |
| { |
| set_calculated_env_vars(); |
| /* |
| * Ignore errors here; the value may not be used depending on |
| * extlinux.conf or boot script content. |
| */ |
| set_fdt_addr(); |
| /* Ignore errors here; not all cases care about Ethernet addresses */ |
| set_ethaddr_from_nvtboot(); |
| |
| return 0; |
| } |