| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2013 Gateworks Corporation |
| * |
| * Author: Tim Harvey <tharvey@gateworks.com> |
| */ |
| |
| #include <asm/arch/clock.h> |
| #include <asm/arch/mx6-pins.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/gpio.h> |
| #include <asm/mach-imx/mxc_i2c.h> |
| #include <fsl_esdhc.h> |
| #include <hwconfig.h> |
| #include <power/pmic.h> |
| #include <power/ltc3676_pmic.h> |
| #include <power/pfuze100_pmic.h> |
| |
| #include "common.h" |
| |
| /* UART2: Serial Console */ |
| static iomux_v3_cfg_t const uart2_pads[] = { |
| IOMUX_PADS(PAD_SD4_DAT7__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), |
| IOMUX_PADS(PAD_SD4_DAT4__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), |
| }; |
| |
| void setup_iomux_uart(void) |
| { |
| SETUP_IOMUX_PADS(uart2_pads); |
| } |
| |
| /* MMC */ |
| static iomux_v3_cfg_t const gw5904_emmc_pads[] = { |
| IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| IOMUX_PADS(PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| IOMUX_PADS(PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| IOMUX_PADS(PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| IOMUX_PADS(PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| IOMUX_PADS(PAD_SD3_RST__SD3_RESET | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| }; |
| /* 4-bit microSD on SD2 */ |
| static iomux_v3_cfg_t const gw5904_mmc_pads[] = { |
| IOMUX_PADS(PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| IOMUX_PADS(PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| IOMUX_PADS(PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| IOMUX_PADS(PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| IOMUX_PADS(PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| /* CD */ |
| IOMUX_PADS(PAD_NANDF_CS0__GPIO6_IO11 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| }; |
| /* 8-bit eMMC on SD2/NAND */ |
| static iomux_v3_cfg_t const gw560x_emmc_sd2_pads[] = { |
| IOMUX_PADS(PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| IOMUX_PADS(PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| IOMUX_PADS(PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| IOMUX_PADS(PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| IOMUX_PADS(PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| IOMUX_PADS(PAD_NANDF_D4__SD2_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| IOMUX_PADS(PAD_NANDF_D5__SD2_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| IOMUX_PADS(PAD_NANDF_D6__SD2_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| IOMUX_PADS(PAD_NANDF_D7__SD2_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| }; |
| |
| static iomux_v3_cfg_t const usdhc3_pads[] = { |
| IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| IOMUX_PADS(PAD_SD3_DAT5__GPIO7_IO00 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| }; |
| |
| /* |
| * I2C pad configs: |
| * I2C1: GSC |
| * I2C2: PMIC,PCIe Switch,Clock,Mezz |
| * I2C3: Multimedia/Expansion |
| */ |
| static struct i2c_pads_info mx6q_i2c_pad_info[] = { |
| { |
| .scl = { |
| .i2c_mode = MX6Q_PAD_EIM_D21__I2C1_SCL | PC, |
| .gpio_mode = MX6Q_PAD_EIM_D21__GPIO3_IO21 | PC, |
| .gp = IMX_GPIO_NR(3, 21) |
| }, |
| .sda = { |
| .i2c_mode = MX6Q_PAD_EIM_D28__I2C1_SDA | PC, |
| .gpio_mode = MX6Q_PAD_EIM_D28__GPIO3_IO28 | PC, |
| .gp = IMX_GPIO_NR(3, 28) |
| } |
| }, { |
| .scl = { |
| .i2c_mode = MX6Q_PAD_KEY_COL3__I2C2_SCL | PC, |
| .gpio_mode = MX6Q_PAD_KEY_COL3__GPIO4_IO12 | PC, |
| .gp = IMX_GPIO_NR(4, 12) |
| }, |
| .sda = { |
| .i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | PC, |
| .gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO4_IO13 | PC, |
| .gp = IMX_GPIO_NR(4, 13) |
| } |
| }, { |
| .scl = { |
| .i2c_mode = MX6Q_PAD_GPIO_3__I2C3_SCL | PC, |
| .gpio_mode = MX6Q_PAD_GPIO_3__GPIO1_IO03 | PC, |
| .gp = IMX_GPIO_NR(1, 3) |
| }, |
| .sda = { |
| .i2c_mode = MX6Q_PAD_GPIO_6__I2C3_SDA | PC, |
| .gpio_mode = MX6Q_PAD_GPIO_6__GPIO1_IO06 | PC, |
| .gp = IMX_GPIO_NR(1, 6) |
| } |
| } |
| }; |
| |
| static struct i2c_pads_info mx6dl_i2c_pad_info[] = { |
| { |
| .scl = { |
| .i2c_mode = MX6DL_PAD_EIM_D21__I2C1_SCL | PC, |
| .gpio_mode = MX6DL_PAD_EIM_D21__GPIO3_IO21 | PC, |
| .gp = IMX_GPIO_NR(3, 21) |
| }, |
| .sda = { |
| .i2c_mode = MX6DL_PAD_EIM_D28__I2C1_SDA | PC, |
| .gpio_mode = MX6DL_PAD_EIM_D28__GPIO3_IO28 | PC, |
| .gp = IMX_GPIO_NR(3, 28) |
| } |
| }, { |
| .scl = { |
| .i2c_mode = MX6DL_PAD_KEY_COL3__I2C2_SCL | PC, |
| .gpio_mode = MX6DL_PAD_KEY_COL3__GPIO4_IO12 | PC, |
| .gp = IMX_GPIO_NR(4, 12) |
| }, |
| .sda = { |
| .i2c_mode = MX6DL_PAD_KEY_ROW3__I2C2_SDA | PC, |
| .gpio_mode = MX6DL_PAD_KEY_ROW3__GPIO4_IO13 | PC, |
| .gp = IMX_GPIO_NR(4, 13) |
| } |
| }, { |
| .scl = { |
| .i2c_mode = MX6DL_PAD_GPIO_3__I2C3_SCL | PC, |
| .gpio_mode = MX6DL_PAD_GPIO_3__GPIO1_IO03 | PC, |
| .gp = IMX_GPIO_NR(1, 3) |
| }, |
| .sda = { |
| .i2c_mode = MX6DL_PAD_GPIO_6__I2C3_SDA | PC, |
| .gpio_mode = MX6DL_PAD_GPIO_6__GPIO1_IO06 | PC, |
| .gp = IMX_GPIO_NR(1, 6) |
| } |
| } |
| }; |
| |
| void setup_ventana_i2c(int i2c) |
| { |
| struct i2c_pads_info *p; |
| |
| if (is_cpu_type(MXC_CPU_MX6Q)) |
| p = &mx6q_i2c_pad_info[i2c]; |
| else |
| p = &mx6dl_i2c_pad_info[i2c]; |
| |
| setup_i2c(i2c, CONFIG_SYS_I2C_SPEED, 0x7f, p); |
| } |
| |
| /* |
| * Baseboard specific GPIO |
| */ |
| static iomux_v3_cfg_t const gw51xx_gpio_pads[] = { |
| /* PANLEDG# */ |
| IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG), |
| /* PANLEDR# */ |
| IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG), |
| /* IOEXP_PWREN# */ |
| IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | DIO_PAD_CFG), |
| /* IOEXP_IRQ# */ |
| IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(IRQ_PAD_CTRL)), |
| |
| /* GPS_SHDN */ |
| IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | DIO_PAD_CFG), |
| /* VID_PWR */ |
| IOMUX_PADS(PAD_CSI0_DATA_EN__GPIO5_IO20 | DIO_PAD_CFG), |
| /* PCI_RST# */ |
| IOMUX_PADS(PAD_GPIO_0__GPIO1_IO00 | DIO_PAD_CFG), |
| /* PCIESKT_WDIS# */ |
| IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG), |
| }; |
| |
| static iomux_v3_cfg_t const gw52xx_gpio_pads[] = { |
| /* SD3_VSELECT */ |
| IOMUX_PADS(PAD_NANDF_CS1__GPIO6_IO14 | DIO_PAD_CFG), |
| /* RS232_EN# */ |
| IOMUX_PADS(PAD_SD4_DAT3__GPIO2_IO11 | DIO_PAD_CFG), |
| /* MSATA_EN */ |
| IOMUX_PADS(PAD_SD4_DAT0__GPIO2_IO08 | DIO_PAD_CFG), |
| /* PANLEDG# */ |
| IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG), |
| /* PANLEDR# */ |
| IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG), |
| /* IOEXP_PWREN# */ |
| IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | DIO_PAD_CFG), |
| /* IOEXP_IRQ# */ |
| IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(IRQ_PAD_CTRL)), |
| /* CAN_STBY */ |
| IOMUX_PADS(PAD_GPIO_9__GPIO1_IO09 | DIO_PAD_CFG), |
| /* MX6_LOCLED# */ |
| IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG), |
| /* GPS_SHDN */ |
| IOMUX_PADS(PAD_ENET_RXD0__GPIO1_IO27 | DIO_PAD_CFG), |
| /* USBOTG_SEL */ |
| IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | DIO_PAD_CFG), |
| /* VID_PWR */ |
| IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | DIO_PAD_CFG), |
| /* PCI_RST# */ |
| IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | DIO_PAD_CFG), |
| /* PCI_RST# (GW522x) */ |
| IOMUX_PADS(PAD_EIM_D23__GPIO3_IO23 | DIO_PAD_CFG), |
| /* RS485_EN */ |
| IOMUX_PADS(PAD_SD3_DAT4__GPIO7_IO01 | DIO_PAD_CFG), |
| /* PCIESKT_WDIS# */ |
| IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG), |
| }; |
| |
| static iomux_v3_cfg_t const gw53xx_gpio_pads[] = { |
| /* SD3_VSELECT */ |
| IOMUX_PADS(PAD_NANDF_CS1__GPIO6_IO14 | DIO_PAD_CFG), |
| /* RS232_EN# */ |
| IOMUX_PADS(PAD_SD4_DAT3__GPIO2_IO11 | DIO_PAD_CFG), |
| /* MSATA_EN */ |
| IOMUX_PADS(PAD_SD4_DAT0__GPIO2_IO08 | DIO_PAD_CFG), |
| /* CAN_STBY */ |
| IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | DIO_PAD_CFG), |
| /* USB_HUBRST# */ |
| IOMUX_PADS(PAD_GPIO_9__GPIO1_IO09 | DIO_PAD_CFG), |
| /* PANLEDG# */ |
| IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG), |
| /* PANLEDR# */ |
| IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG), |
| /* MX6_LOCLED# */ |
| IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG), |
| /* IOEXP_PWREN# */ |
| IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | DIO_PAD_CFG), |
| /* IOEXP_IRQ# */ |
| IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(IRQ_PAD_CTRL)), |
| /* DIOI2C_DIS# */ |
| IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | DIO_PAD_CFG), |
| /* GPS_SHDN */ |
| IOMUX_PADS(PAD_ENET_RXD0__GPIO1_IO27 | DIO_PAD_CFG), |
| /* VID_EN */ |
| IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | DIO_PAD_CFG), |
| /* PCI_RST# */ |
| IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | DIO_PAD_CFG), |
| /* RS485_EN */ |
| IOMUX_PADS(PAD_SD3_DAT4__GPIO7_IO01 | DIO_PAD_CFG), |
| /* PCIESKT_WDIS# */ |
| IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG), |
| }; |
| |
| static iomux_v3_cfg_t const gw54xx_gpio_pads[] = { |
| /* SD3_VSELECT */ |
| IOMUX_PADS(PAD_NANDF_CS1__GPIO6_IO14 | DIO_PAD_CFG), |
| /* RS232_EN# */ |
| IOMUX_PADS(PAD_SD4_DAT3__GPIO2_IO11 | DIO_PAD_CFG), |
| /* MSATA_EN */ |
| IOMUX_PADS(PAD_SD4_DAT0__GPIO2_IO08 | DIO_PAD_CFG), |
| /* CAN_STBY */ |
| IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | DIO_PAD_CFG), |
| /* PANLEDG# */ |
| IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG), |
| /* PANLEDR# */ |
| IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG), |
| /* MX6_LOCLED# */ |
| IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG), |
| /* USB_HUBRST# */ |
| IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16 | DIO_PAD_CFG), |
| /* MIPI_DIO */ |
| IOMUX_PADS(PAD_SD1_DAT3__GPIO1_IO21 | DIO_PAD_CFG), |
| /* RS485_EN */ |
| IOMUX_PADS(PAD_EIM_D24__GPIO3_IO24 | DIO_PAD_CFG), |
| /* IOEXP_PWREN# */ |
| IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | DIO_PAD_CFG), |
| /* IOEXP_IRQ# */ |
| IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(IRQ_PAD_CTRL)), |
| /* DIOI2C_DIS# */ |
| IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | DIO_PAD_CFG), |
| /* PCI_RST# */ |
| IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | DIO_PAD_CFG), |
| /* VID_EN */ |
| IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | DIO_PAD_CFG), |
| /* RS485_EN */ |
| IOMUX_PADS(PAD_SD3_DAT4__GPIO7_IO01 | DIO_PAD_CFG), |
| /* PCIESKT_WDIS# */ |
| IOMUX_PADS(PAD_DISP0_DAT23__GPIO5_IO17 | DIO_PAD_CFG), |
| }; |
| |
| static iomux_v3_cfg_t const gw551x_gpio_pads[] = { |
| /* CAN_STBY */ |
| IOMUX_PADS(PAD_GPIO_9__GPIO1_IO09 | DIO_PAD_CFG), |
| /* PANLED# */ |
| IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG), |
| /* PCI_RST# */ |
| IOMUX_PADS(PAD_GPIO_0__GPIO1_IO00 | DIO_PAD_CFG), |
| /* PCIESKT_WDIS# */ |
| IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG), |
| }; |
| |
| static iomux_v3_cfg_t const gw552x_gpio_pads[] = { |
| /* MSATA_EN */ |
| IOMUX_PADS(PAD_SD4_DAT0__GPIO2_IO08 | DIO_PAD_CFG), |
| /* USBOTG_SEL */ |
| IOMUX_PADS(PAD_GPIO_7__GPIO1_IO07 | DIO_PAD_CFG), |
| /* USB_HUBRST# */ |
| IOMUX_PADS(PAD_GPIO_9__GPIO1_IO09 | DIO_PAD_CFG), |
| /* PANLEDG# */ |
| IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG), |
| /* PANLEDR# */ |
| IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG), |
| /* MX6_LOCLED# */ |
| IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG), |
| /* PCI_RST# */ |
| IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | DIO_PAD_CFG), |
| /* MX6_DIO[4:9] */ |
| IOMUX_PADS(PAD_CSI0_PIXCLK__GPIO5_IO18 | DIO_PAD_CFG), |
| IOMUX_PADS(PAD_CSI0_DATA_EN__GPIO5_IO20 | DIO_PAD_CFG), |
| IOMUX_PADS(PAD_CSI0_VSYNC__GPIO5_IO21 | DIO_PAD_CFG), |
| IOMUX_PADS(PAD_CSI0_DAT4__GPIO5_IO22 | DIO_PAD_CFG), |
| IOMUX_PADS(PAD_CSI0_DAT5__GPIO5_IO23 | DIO_PAD_CFG), |
| IOMUX_PADS(PAD_CSI0_DAT7__GPIO5_IO25 | DIO_PAD_CFG), |
| /* PCIEGBE1_OFF# */ |
| IOMUX_PADS(PAD_GPIO_1__GPIO1_IO01 | DIO_PAD_CFG), |
| /* PCIEGBE2_OFF# */ |
| IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | DIO_PAD_CFG), |
| /* PCIESKT_WDIS# */ |
| IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG), |
| }; |
| |
| static iomux_v3_cfg_t const gw553x_gpio_pads[] = { |
| /* SD3_VSELECT */ |
| IOMUX_PADS(PAD_NANDF_CS1__GPIO6_IO14 | DIO_PAD_CFG), |
| /* PANLEDG# */ |
| IOMUX_PADS(PAD_KEY_COL2__GPIO4_IO10 | DIO_PAD_CFG), |
| /* PANLEDR# */ |
| IOMUX_PADS(PAD_KEY_ROW2__GPIO4_IO11 | DIO_PAD_CFG), |
| /* VID_PWR */ |
| IOMUX_PADS(PAD_CSI0_DATA_EN__GPIO5_IO20 | DIO_PAD_CFG), |
| /* PCI_RST# */ |
| IOMUX_PADS(PAD_GPIO_0__GPIO1_IO00 | DIO_PAD_CFG), |
| /* PCIESKT_WDIS# */ |
| IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG), |
| }; |
| |
| static iomux_v3_cfg_t const gw560x_gpio_pads[] = { |
| /* RS232_EN# */ |
| IOMUX_PADS(PAD_SD4_DAT3__GPIO2_IO11 | DIO_PAD_CFG), |
| /* CAN_STBY */ |
| IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | DIO_PAD_CFG), |
| /* USB_HUBRST# */ |
| IOMUX_PADS(PAD_GPIO_9__GPIO1_IO09 | DIO_PAD_CFG), |
| /* PANLEDG# */ |
| IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG), |
| /* PANLEDR# */ |
| IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG), |
| /* MX6_LOCLED# */ |
| IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG), |
| /* IOEXP_PWREN# */ |
| IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | DIO_PAD_CFG), |
| /* IOEXP_IRQ# */ |
| IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(IRQ_PAD_CTRL)), |
| /* DIOI2C_DIS# */ |
| IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | DIO_PAD_CFG), |
| /* VID_EN */ |
| IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | DIO_PAD_CFG), |
| /* PCI_RST# */ |
| IOMUX_PADS(PAD_DISP0_DAT10__GPIO4_IO31 | DIO_PAD_CFG), |
| /* RS485_EN */ |
| IOMUX_PADS(PAD_SD3_DAT4__GPIO7_IO01 | DIO_PAD_CFG), |
| /* PCIESKT_WDIS# */ |
| IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG), |
| /* USBH2_PEN (OTG) */ |
| IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG), |
| /* 12V0_PWR_EN */ |
| IOMUX_PADS(PAD_DISP0_DAT5__GPIO4_IO26 | DIO_PAD_CFG), |
| }; |
| |
| static iomux_v3_cfg_t const gw5901_gpio_pads[] = { |
| /* MX6_LOCLED# */ |
| IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG), |
| /* ETH1_EN */ |
| IOMUX_PADS(PAD_GPIO_1__GPIO1_IO01 | DIO_PAD_CFG), |
| /* CAN_STBY */ |
| IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | DIO_PAD_CFG), |
| /* PCI_RST# */ |
| IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | DIO_PAD_CFG), |
| /* PMIC reset */ |
| IOMUX_PADS(PAD_DISP0_DAT8__WDOG1_B | DIO_PAD_CFG), |
| /* COM_CFGA/B/C/D */ |
| IOMUX_PADS(PAD_DISP0_DAT20__GPIO5_IO14 | DIO_PAD_CFG), |
| IOMUX_PADS(PAD_DISP0_DAT21__GPIO5_IO15 | DIO_PAD_CFG), |
| IOMUX_PADS(PAD_DISP0_DAT22__GPIO5_IO16 | DIO_PAD_CFG), |
| IOMUX_PADS(PAD_DISP0_DAT23__GPIO5_IO17 | DIO_PAD_CFG), |
| /* ETI_IRQ# */ |
| IOMUX_PADS(PAD_GPIO_5__GPIO1_IO05 | DIO_PAD_CFG), |
| /* DIO_IRQ# */ |
| IOMUX_PADS(PAD_GPIO_7__GPIO1_IO07 | DIO_PAD_CFG), |
| /* FIBER_SIGDET */ |
| IOMUX_PADS(PAD_GPIO_9__GPIO1_IO09 | DIO_PAD_CFG), |
| }; |
| |
| static iomux_v3_cfg_t const gw5902_gpio_pads[] = { |
| /* MX6_LOCLED# */ |
| IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG), |
| /* CAN1_STBY */ |
| IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | DIO_PAD_CFG), |
| /* CAN2_STBY */ |
| IOMUX_PADS(PAD_SD3_CLK__GPIO7_IO03 | DIO_PAD_CFG), |
| /* UART1_EN# */ |
| IOMUX_PADS(PAD_SD4_DAT3__GPIO2_IO11 | DIO_PAD_CFG), |
| /* PCI_RST# */ |
| IOMUX_PADS(PAD_GPIO_0__GPIO1_IO00 | DIO_PAD_CFG), |
| /* 5V_UVLO */ |
| IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG), |
| /* ETI_IRQ# */ |
| IOMUX_PADS(PAD_GPIO_5__GPIO1_IO05 | DIO_PAD_CFG), |
| /* DIO_IRQ# */ |
| IOMUX_PADS(PAD_GPIO_7__GPIO1_IO07 | DIO_PAD_CFG), |
| /* USBOTG_PEN */ |
| IOMUX_PADS(PAD_EIM_D23__GPIO3_IO23 | DIO_PAD_CFG), |
| }; |
| |
| static iomux_v3_cfg_t const gw5903_gpio_pads[] = { |
| /* BKLT_12VEN */ |
| IOMUX_PADS(PAD_GPIO_7__GPIO1_IO07 | DIO_PAD_CFG), |
| /* EMMY_PDN# */ |
| IOMUX_PADS(PAD_NANDF_D2__GPIO2_IO02 | DIO_PAD_CFG), |
| /* EMMY_CFG1# */ |
| IOMUX_PADS(PAD_NANDF_D3__GPIO2_IO03 | DIO_PAD_CFG), |
| /* EMMY_CFG1# */ |
| IOMUX_PADS(PAD_NANDF_D4__GPIO2_IO04 | DIO_PAD_CFG), |
| /* USBH1_PEN (EHCI) */ |
| IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | DIO_PAD_CFG), |
| /* USBH2_PEN (OTG) */ |
| IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG), |
| /* USBDPC_PEN */ |
| IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG), |
| /* TOUCH_RST */ |
| IOMUX_PADS(PAD_KEY_COL1__GPIO4_IO08 | DIO_PAD_CFG), |
| /* AUDIO_RST# */ |
| IOMUX_PADS(PAD_DISP0_DAT23__GPIO5_IO17 | DIO_PAD_CFG), |
| /* UART1_TEN# */ |
| IOMUX_PADS(PAD_CSI0_DAT12__GPIO5_IO30 | DIO_PAD_CFG), |
| /* MX6_LOCLED# */ |
| IOMUX_PADS(PAD_NANDF_CS1__GPIO6_IO14 | DIO_PAD_CFG), |
| /* LVDS_BKLEN # */ |
| IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG), |
| /* RGMII_PDWN# */ |
| IOMUX_PADS(PAD_ENET_CRS_DV__GPIO1_IO25 | DIO_PAD_CFG), |
| /* TOUCH_IRQ# */ |
| IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG), |
| /* TOUCH_RST# */ |
| IOMUX_PADS(PAD_KEY_COL1__GPIO4_IO08 | DIO_PAD_CFG), |
| }; |
| |
| static iomux_v3_cfg_t const gw5904_gpio_pads[] = { |
| /* USB_HUBRST# */ |
| IOMUX_PADS(PAD_GPIO_9__GPIO1_IO09 | DIO_PAD_CFG), |
| /* PANLEDG# */ |
| IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG), |
| /* PANLEDR# */ |
| IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG), |
| /* MX6_LOCLED# */ |
| IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG), |
| /* IOEXP_PWREN# */ |
| IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | DIO_PAD_CFG), |
| /* IOEXP_IRQ# */ |
| IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(IRQ_PAD_CTRL)), |
| /* DIOI2C_DIS# */ |
| IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | DIO_PAD_CFG), |
| /* UART_RS485 */ |
| IOMUX_PADS(PAD_DISP0_DAT2__GPIO4_IO23 | DIO_PAD_CFG), |
| /* UART_HALF */ |
| IOMUX_PADS(PAD_DISP0_DAT3__GPIO4_IO24 | DIO_PAD_CFG), |
| /* SKT1_WDIS# */ |
| IOMUX_PADS(PAD_DISP0_DAT17__GPIO5_IO11 | DIO_PAD_CFG), |
| /* SKT1_RST# */ |
| IOMUX_PADS(PAD_DISP0_DAT18__GPIO5_IO12 | DIO_PAD_CFG), |
| /* SKT2_WDIS# */ |
| IOMUX_PADS(PAD_DISP0_DAT19__GPIO5_IO13 | DIO_PAD_CFG), |
| /* SKT2_RST# */ |
| IOMUX_PADS(PAD_GPIO_0__GPIO1_IO00 | DIO_PAD_CFG), |
| /* M2_OFF# */ |
| IOMUX_PADS(PAD_SD2_DAT0__GPIO1_IO15 | DIO_PAD_CFG), |
| /* M2_WDIS# */ |
| IOMUX_PADS(PAD_SD2_DAT1__GPIO1_IO14 | DIO_PAD_CFG), |
| /* M2_RST# */ |
| IOMUX_PADS(PAD_SD2_DAT2__GPIO1_IO13 | DIO_PAD_CFG), |
| /* RS232_EN# */ |
| IOMUX_PADS(PAD_SD4_DAT3__GPIO2_IO11 | DIO_PAD_CFG), |
| }; |
| |
| static iomux_v3_cfg_t const gw5905_gpio_pads[] = { |
| /* EMMY_PDN# */ |
| IOMUX_PADS(PAD_NANDF_D3__GPIO2_IO03 | DIO_PAD_CFG), |
| /* MX6_LOCLED# */ |
| IOMUX_PADS(PAD_NANDF_CS1__GPIO6_IO14 | DIO_PAD_CFG), |
| /* MIPI_RST */ |
| IOMUX_PADS(PAD_SD2_DAT0__GPIO1_IO15 | DIO_PAD_CFG), |
| /* MIPI_PWDN */ |
| IOMUX_PADS(PAD_SD2_DAT1__GPIO1_IO14 | DIO_PAD_CFG), |
| /* USBEHCI_SEL */ |
| IOMUX_PADS(PAD_GPIO_7__GPIO1_IO07 | DIO_PAD_CFG), |
| /* PCI_RST# */ |
| IOMUX_PADS(PAD_GPIO_16__GPIO7_IO11 | DIO_PAD_CFG), |
| /* LVDS_BKLEN # */ |
| IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG), |
| /* PCIESKT_WDIS# */ |
| IOMUX_PADS(PAD_GPIO_18__GPIO7_IO13 | DIO_PAD_CFG), |
| /* SPK_SHDN# */ |
| IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | DIO_PAD_CFG), |
| /* LOCLED# */ |
| IOMUX_PADS(PAD_NANDF_CS1__GPIO6_IO14 | DIO_PAD_CFG), |
| /* FLASH LED1 */ |
| IOMUX_PADS(PAD_DISP0_DAT11__GPIO5_IO05 | DIO_PAD_CFG), |
| /* FLASH LED2 */ |
| IOMUX_PADS(PAD_DISP0_DAT12__GPIO5_IO06 | DIO_PAD_CFG), |
| /* DECT_RST# */ |
| IOMUX_PADS(PAD_DISP0_DAT20__GPIO5_IO14 | DIO_PAD_CFG), |
| /* USBH1_PEN (EHCI) */ |
| IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | DIO_PAD_CFG), |
| /* LVDS_PWM */ |
| IOMUX_PADS(PAD_GPIO_9__GPIO1_IO09 | DIO_PAD_CFG), |
| /* CODEC_RST */ |
| IOMUX_PADS(PAD_DISP0_DAT23__GPIO5_IO17 | DIO_PAD_CFG), |
| /* GYRO_CONTROL/DATA_EN */ |
| IOMUX_PADS(PAD_CSI0_DAT8__GPIO5_IO26 | DIO_PAD_CFG), |
| /* TOUCH_RST */ |
| IOMUX_PADS(PAD_KEY_COL1__GPIO4_IO08 | DIO_PAD_CFG), |
| /* TOUCH_IRQ */ |
| IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG), |
| }; |
| |
| /* Digital I/O */ |
| struct dio_cfg gw51xx_dio[] = { |
| { |
| { IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16) }, |
| IMX_GPIO_NR(1, 16), |
| { 0, 0 }, |
| 0 |
| }, |
| { |
| { IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19) }, |
| IMX_GPIO_NR(1, 19), |
| { IOMUX_PADS(PAD_SD1_DAT2__PWM2_OUT) }, |
| 2 |
| }, |
| { |
| { IOMUX_PADS(PAD_SD1_DAT1__GPIO1_IO17) }, |
| IMX_GPIO_NR(1, 17), |
| { IOMUX_PADS(PAD_SD1_DAT1__PWM3_OUT) }, |
| 3 |
| }, |
| { |
| { IOMUX_PADS(PAD_SD1_CMD__GPIO1_IO18) }, |
| IMX_GPIO_NR(1, 18), |
| { IOMUX_PADS(PAD_SD1_CMD__PWM4_OUT) }, |
| 4 |
| }, |
| }; |
| |
| struct dio_cfg gw52xx_dio[] = { |
| { |
| { IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16) }, |
| IMX_GPIO_NR(1, 16), |
| { 0, 0 }, |
| 0 |
| }, |
| { |
| { IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19) }, |
| IMX_GPIO_NR(1, 19), |
| { IOMUX_PADS(PAD_SD1_DAT2__PWM2_OUT) }, |
| 2 |
| }, |
| { |
| { IOMUX_PADS(PAD_SD1_DAT1__GPIO1_IO17) }, |
| IMX_GPIO_NR(1, 17), |
| { IOMUX_PADS(PAD_SD1_DAT1__PWM3_OUT) }, |
| 3 |
| }, |
| { |
| { IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20) }, |
| IMX_GPIO_NR(1, 20), |
| { 0, 0 }, |
| 0 |
| }, |
| }; |
| |
| struct dio_cfg gw53xx_dio[] = { |
| { |
| { IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16) }, |
| IMX_GPIO_NR(1, 16), |
| { 0, 0 }, |
| 0 |
| }, |
| { |
| { IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19) }, |
| IMX_GPIO_NR(1, 19), |
| { IOMUX_PADS(PAD_SD1_DAT2__PWM2_OUT) }, |
| 2 |
| }, |
| { |
| { IOMUX_PADS(PAD_SD1_DAT1__GPIO1_IO17) }, |
| IMX_GPIO_NR(1, 17), |
| { IOMUX_PADS(PAD_SD1_DAT1__PWM3_OUT) }, |
| 3 |
| }, |
| { |
| {IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20) }, |
| IMX_GPIO_NR(1, 20), |
| { 0, 0 }, |
| 0 |
| }, |
| }; |
| |
| struct dio_cfg gw54xx_dio[] = { |
| { |
| { IOMUX_PADS(PAD_GPIO_9__GPIO1_IO09) }, |
| IMX_GPIO_NR(1, 9), |
| { IOMUX_PADS(PAD_GPIO_9__PWM1_OUT) }, |
| 1 |
| }, |
| { |
| { IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19) }, |
| IMX_GPIO_NR(1, 19), |
| { IOMUX_PADS(PAD_SD1_DAT2__PWM2_OUT) }, |
| 2 |
| }, |
| { |
| { IOMUX_PADS(PAD_SD4_DAT1__GPIO2_IO09) }, |
| IMX_GPIO_NR(2, 9), |
| { IOMUX_PADS(PAD_SD4_DAT1__PWM3_OUT) }, |
| 3 |
| }, |
| { |
| { IOMUX_PADS(PAD_SD4_DAT2__GPIO2_IO10) }, |
| IMX_GPIO_NR(2, 10), |
| { IOMUX_PADS(PAD_SD4_DAT2__PWM4_OUT) }, |
| 4 |
| }, |
| }; |
| |
| struct dio_cfg gw551x_dio[] = { |
| { |
| { IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19) }, |
| IMX_GPIO_NR(1, 19), |
| { IOMUX_PADS(PAD_SD1_DAT2__PWM2_OUT) }, |
| 2 |
| }, |
| { |
| { IOMUX_PADS(PAD_SD1_DAT1__GPIO1_IO17) }, |
| IMX_GPIO_NR(1, 17), |
| { IOMUX_PADS(PAD_SD1_DAT1__PWM3_OUT) }, |
| 3 |
| }, |
| }; |
| |
| struct dio_cfg gw552x_dio[] = { |
| { |
| { IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16) }, |
| IMX_GPIO_NR(1, 16), |
| { 0, 0 }, |
| 0 |
| }, |
| { |
| { IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19) }, |
| IMX_GPIO_NR(1, 19), |
| { IOMUX_PADS(PAD_SD1_DAT2__PWM2_OUT) }, |
| 2 |
| }, |
| { |
| { IOMUX_PADS(PAD_SD1_DAT1__GPIO1_IO17) }, |
| IMX_GPIO_NR(1, 17), |
| { IOMUX_PADS(PAD_SD1_DAT1__PWM3_OUT) }, |
| 3 |
| }, |
| { |
| {IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20) }, |
| IMX_GPIO_NR(1, 20), |
| { 0, 0 }, |
| 0 |
| }, |
| { |
| {IOMUX_PADS(PAD_CSI0_PIXCLK__GPIO5_IO18) }, |
| IMX_GPIO_NR(5, 18), |
| { 0, 0 }, |
| 0 |
| }, |
| { |
| {IOMUX_PADS(PAD_CSI0_DATA_EN__GPIO5_IO20) }, |
| IMX_GPIO_NR(5, 20), |
| { 0, 0 }, |
| 0 |
| }, |
| { |
| {IOMUX_PADS(PAD_CSI0_VSYNC__GPIO5_IO21) }, |
| IMX_GPIO_NR(5, 21), |
| { 0, 0 }, |
| 0 |
| }, |
| { |
| {IOMUX_PADS(PAD_CSI0_DAT4__GPIO5_IO22) }, |
| IMX_GPIO_NR(5, 22), |
| { 0, 0 }, |
| 0 |
| }, |
| { |
| {IOMUX_PADS(PAD_CSI0_DAT5__GPIO5_IO23) }, |
| IMX_GPIO_NR(5, 23), |
| { 0, 0 }, |
| 0 |
| }, |
| { |
| {IOMUX_PADS(PAD_CSI0_DAT7__GPIO5_IO25) }, |
| IMX_GPIO_NR(5, 25), |
| { 0, 0 }, |
| 0 |
| }, |
| }; |
| |
| struct dio_cfg gw553x_dio[] = { |
| { |
| { IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16) }, |
| IMX_GPIO_NR(1, 16), |
| { 0, 0 }, |
| 0 |
| }, |
| { |
| { IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19) }, |
| IMX_GPIO_NR(1, 19), |
| { IOMUX_PADS(PAD_SD1_DAT2__PWM2_OUT) }, |
| 2 |
| }, |
| { |
| { IOMUX_PADS(PAD_SD1_DAT1__GPIO1_IO17) }, |
| IMX_GPIO_NR(1, 17), |
| { IOMUX_PADS(PAD_SD1_DAT1__PWM3_OUT) }, |
| 3 |
| }, |
| { |
| { IOMUX_PADS(PAD_SD1_CMD__GPIO1_IO18) }, |
| IMX_GPIO_NR(1, 18), |
| { IOMUX_PADS(PAD_SD1_CMD__PWM4_OUT) }, |
| 4 |
| }, |
| }; |
| |
| struct dio_cfg gw560x_dio[] = { |
| { |
| { IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16) }, |
| IMX_GPIO_NR(1, 16), |
| { 0, 0 }, |
| 0 |
| }, |
| { |
| { IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19) }, |
| IMX_GPIO_NR(1, 19), |
| { IOMUX_PADS(PAD_SD1_DAT2__PWM2_OUT) }, |
| 2 |
| }, |
| { |
| { IOMUX_PADS(PAD_SD1_DAT1__GPIO1_IO17) }, |
| IMX_GPIO_NR(1, 17), |
| { IOMUX_PADS(PAD_SD1_DAT1__PWM3_OUT) }, |
| 3 |
| }, |
| { |
| {IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20) }, |
| IMX_GPIO_NR(1, 20), |
| { 0, 0 }, |
| 0 |
| }, |
| }; |
| |
| struct dio_cfg gw5901_dio[] = { |
| { |
| { IOMUX_PADS(PAD_DISP0_DAT20__GPIO5_IO14) }, |
| IMX_GPIO_NR(5, 14), |
| { 0, 0 }, |
| 0 |
| }, |
| { |
| { IOMUX_PADS(PAD_DISP0_DAT21__GPIO5_IO15) }, |
| IMX_GPIO_NR(5, 15), |
| { 0, 0 }, |
| 0 |
| }, |
| { |
| { IOMUX_PADS(PAD_DISP0_DAT22__GPIO5_IO16) }, |
| IMX_GPIO_NR(5, 16), |
| { 0, 0 }, |
| 0 |
| }, |
| { |
| { IOMUX_PADS(PAD_DISP0_DAT23__GPIO5_IO17) }, |
| IMX_GPIO_NR(5, 17), |
| { 0, 0 }, |
| 0 |
| }, |
| }; |
| |
| struct dio_cfg gw5902_dio[] = { |
| { |
| { IOMUX_PADS(PAD_DISP0_DAT20__GPIO5_IO14) }, |
| IMX_GPIO_NR(5, 14), |
| { 0, 0 }, |
| 0 |
| }, |
| { |
| { IOMUX_PADS(PAD_DISP0_DAT21__GPIO5_IO15) }, |
| IMX_GPIO_NR(5, 15), |
| { 0, 0 }, |
| 0 |
| }, |
| { |
| { IOMUX_PADS(PAD_DISP0_DAT22__GPIO5_IO16) }, |
| IMX_GPIO_NR(5, 16), |
| { 0, 0 }, |
| 0 |
| }, |
| { |
| { IOMUX_PADS(PAD_DISP0_DAT23__GPIO5_IO17) }, |
| IMX_GPIO_NR(5, 17), |
| { 0, 0 }, |
| 0 |
| }, |
| }; |
| |
| struct dio_cfg gw5903_dio[] = { |
| }; |
| |
| struct dio_cfg gw5904_dio[] = { |
| { |
| { IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16) }, |
| IMX_GPIO_NR(1, 16), |
| { 0, 0 }, |
| 0 |
| }, |
| { |
| { IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19) }, |
| IMX_GPIO_NR(1, 19), |
| { IOMUX_PADS(PAD_SD1_DAT2__PWM2_OUT) }, |
| 2 |
| }, |
| { |
| { IOMUX_PADS(PAD_SD1_DAT1__GPIO1_IO17) }, |
| IMX_GPIO_NR(1, 17), |
| { IOMUX_PADS(PAD_SD1_DAT1__PWM3_OUT) }, |
| 3 |
| }, |
| { |
| {IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20) }, |
| IMX_GPIO_NR(1, 20), |
| { 0, 0 }, |
| 0 |
| }, |
| { |
| {IOMUX_PADS(PAD_NANDF_D0__GPIO2_IO00) }, |
| IMX_GPIO_NR(2, 0), |
| { 0, 0 }, |
| 0 |
| }, |
| { |
| {IOMUX_PADS(PAD_NANDF_D1__GPIO2_IO01) }, |
| IMX_GPIO_NR(2, 1), |
| { 0, 0 }, |
| 0 |
| }, |
| { |
| {IOMUX_PADS(PAD_NANDF_D2__GPIO2_IO02) }, |
| IMX_GPIO_NR(2, 2), |
| { 0, 0 }, |
| 0 |
| }, |
| { |
| {IOMUX_PADS(PAD_NANDF_D3__GPIO2_IO03) }, |
| IMX_GPIO_NR(2, 3), |
| { 0, 0 }, |
| 0 |
| }, |
| { |
| {IOMUX_PADS(PAD_NANDF_D4__GPIO2_IO04) }, |
| IMX_GPIO_NR(2, 4), |
| { 0, 0 }, |
| 0 |
| }, |
| { |
| {IOMUX_PADS(PAD_NANDF_D5__GPIO2_IO05) }, |
| IMX_GPIO_NR(2, 5), |
| { 0, 0 }, |
| 0 |
| }, |
| { |
| {IOMUX_PADS(PAD_NANDF_D6__GPIO2_IO06) }, |
| IMX_GPIO_NR(2, 6), |
| { 0, 0 }, |
| 0 |
| }, |
| { |
| {IOMUX_PADS(PAD_NANDF_D7__GPIO2_IO07) }, |
| IMX_GPIO_NR(2, 7), |
| { 0, 0 }, |
| 0 |
| }, |
| }; |
| |
| struct dio_cfg gw5906_dio[] = { |
| { |
| { IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16) }, |
| IMX_GPIO_NR(1, 16), |
| { 0, 0 }, |
| 0 |
| }, |
| { |
| { IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19) }, |
| IMX_GPIO_NR(1, 19), |
| { IOMUX_PADS(PAD_SD1_DAT2__PWM2_OUT) }, |
| 2 |
| }, |
| { |
| { IOMUX_PADS(PAD_SD1_DAT1__GPIO1_IO17) }, |
| IMX_GPIO_NR(1, 17), |
| { IOMUX_PADS(PAD_SD1_DAT1__PWM3_OUT) }, |
| 3 |
| }, |
| { |
| {IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20) }, |
| IMX_GPIO_NR(1, 20), |
| { 0, 0 }, |
| 0 |
| }, |
| }; |
| |
| /* |
| * Board Specific GPIO |
| */ |
| struct ventana gpio_cfg[GW_UNKNOWN] = { |
| /* GW5400proto */ |
| { |
| .gpio_pads = gw54xx_gpio_pads, |
| .num_pads = ARRAY_SIZE(gw54xx_gpio_pads)/2, |
| .dio_cfg = gw54xx_dio, |
| .dio_num = ARRAY_SIZE(gw54xx_dio), |
| .leds = { |
| IMX_GPIO_NR(4, 6), |
| IMX_GPIO_NR(4, 10), |
| IMX_GPIO_NR(4, 15), |
| }, |
| .pcie_rst = IMX_GPIO_NR(1, 29), |
| .mezz_pwren = IMX_GPIO_NR(4, 7), |
| .mezz_irq = IMX_GPIO_NR(4, 9), |
| .rs485en = IMX_GPIO_NR(3, 24), |
| .dioi2c_en = IMX_GPIO_NR(4, 5), |
| .pcie_sson = IMX_GPIO_NR(1, 20), |
| .otgpwr_en = IMX_GPIO_NR(3, 22), |
| .mmc_cd = IMX_GPIO_NR(7, 0), |
| }, |
| |
| /* GW51xx */ |
| { |
| .gpio_pads = gw51xx_gpio_pads, |
| .num_pads = ARRAY_SIZE(gw51xx_gpio_pads)/2, |
| .dio_cfg = gw51xx_dio, |
| .dio_num = ARRAY_SIZE(gw51xx_dio), |
| .leds = { |
| IMX_GPIO_NR(4, 6), |
| IMX_GPIO_NR(4, 10), |
| }, |
| .pcie_rst = IMX_GPIO_NR(1, 0), |
| .mezz_pwren = IMX_GPIO_NR(2, 19), |
| .mezz_irq = IMX_GPIO_NR(2, 18), |
| .gps_shdn = IMX_GPIO_NR(1, 2), |
| .vidin_en = IMX_GPIO_NR(5, 20), |
| .wdis = IMX_GPIO_NR(7, 12), |
| .otgpwr_en = IMX_GPIO_NR(3, 22), |
| .nand = true, |
| }, |
| |
| /* GW52xx */ |
| { |
| .gpio_pads = gw52xx_gpio_pads, |
| .num_pads = ARRAY_SIZE(gw52xx_gpio_pads)/2, |
| .dio_cfg = gw52xx_dio, |
| .dio_num = ARRAY_SIZE(gw52xx_dio), |
| .leds = { |
| IMX_GPIO_NR(4, 6), |
| IMX_GPIO_NR(4, 7), |
| IMX_GPIO_NR(4, 15), |
| }, |
| .pcie_rst = IMX_GPIO_NR(1, 29), |
| .mezz_pwren = IMX_GPIO_NR(2, 19), |
| .mezz_irq = IMX_GPIO_NR(2, 18), |
| .gps_shdn = IMX_GPIO_NR(1, 27), |
| .vidin_en = IMX_GPIO_NR(3, 31), |
| .usb_sel = IMX_GPIO_NR(1, 2), |
| .wdis = IMX_GPIO_NR(7, 12), |
| .msata_en = GP_MSATA_SEL, |
| .rs232_en = GP_RS232_EN, |
| .otgpwr_en = IMX_GPIO_NR(3, 22), |
| .vsel_pin = IMX_GPIO_NR(6, 14), |
| .mmc_cd = IMX_GPIO_NR(7, 0), |
| .nand = true, |
| }, |
| |
| /* GW53xx */ |
| { |
| .gpio_pads = gw53xx_gpio_pads, |
| .num_pads = ARRAY_SIZE(gw53xx_gpio_pads)/2, |
| .dio_cfg = gw53xx_dio, |
| .dio_num = ARRAY_SIZE(gw53xx_dio), |
| .leds = { |
| IMX_GPIO_NR(4, 6), |
| IMX_GPIO_NR(4, 7), |
| IMX_GPIO_NR(4, 15), |
| }, |
| .pcie_rst = IMX_GPIO_NR(1, 29), |
| .mezz_pwren = IMX_GPIO_NR(2, 19), |
| .mezz_irq = IMX_GPIO_NR(2, 18), |
| .gps_shdn = IMX_GPIO_NR(1, 27), |
| .vidin_en = IMX_GPIO_NR(3, 31), |
| .wdis = IMX_GPIO_NR(7, 12), |
| .msata_en = GP_MSATA_SEL, |
| .rs232_en = GP_RS232_EN, |
| .otgpwr_en = IMX_GPIO_NR(3, 22), |
| .vsel_pin = IMX_GPIO_NR(6, 14), |
| .mmc_cd = IMX_GPIO_NR(7, 0), |
| .nand = true, |
| }, |
| |
| /* GW54xx */ |
| { |
| .gpio_pads = gw54xx_gpio_pads, |
| .num_pads = ARRAY_SIZE(gw54xx_gpio_pads)/2, |
| .dio_cfg = gw54xx_dio, |
| .dio_num = ARRAY_SIZE(gw54xx_dio), |
| .leds = { |
| IMX_GPIO_NR(4, 6), |
| IMX_GPIO_NR(4, 7), |
| IMX_GPIO_NR(4, 15), |
| }, |
| .pcie_rst = IMX_GPIO_NR(1, 29), |
| .mezz_pwren = IMX_GPIO_NR(2, 19), |
| .mezz_irq = IMX_GPIO_NR(2, 18), |
| .rs485en = IMX_GPIO_NR(7, 1), |
| .vidin_en = IMX_GPIO_NR(3, 31), |
| .dioi2c_en = IMX_GPIO_NR(4, 5), |
| .pcie_sson = IMX_GPIO_NR(1, 20), |
| .wdis = IMX_GPIO_NR(5, 17), |
| .msata_en = GP_MSATA_SEL, |
| .rs232_en = GP_RS232_EN, |
| .otgpwr_en = IMX_GPIO_NR(3, 22), |
| .vsel_pin = IMX_GPIO_NR(6, 14), |
| .mmc_cd = IMX_GPIO_NR(7, 0), |
| .nand = true, |
| }, |
| |
| /* GW551x */ |
| { |
| .gpio_pads = gw551x_gpio_pads, |
| .num_pads = ARRAY_SIZE(gw551x_gpio_pads)/2, |
| .dio_cfg = gw551x_dio, |
| .dio_num = ARRAY_SIZE(gw551x_dio), |
| .leds = { |
| IMX_GPIO_NR(4, 7), |
| }, |
| .pcie_rst = IMX_GPIO_NR(1, 0), |
| .wdis = IMX_GPIO_NR(7, 12), |
| .nand = true, |
| }, |
| |
| /* GW552x */ |
| { |
| .gpio_pads = gw552x_gpio_pads, |
| .num_pads = ARRAY_SIZE(gw552x_gpio_pads)/2, |
| .dio_cfg = gw552x_dio, |
| .dio_num = ARRAY_SIZE(gw552x_dio), |
| .leds = { |
| IMX_GPIO_NR(4, 6), |
| IMX_GPIO_NR(4, 7), |
| IMX_GPIO_NR(4, 15), |
| }, |
| .pcie_rst = IMX_GPIO_NR(1, 29), |
| .usb_sel = IMX_GPIO_NR(1, 7), |
| .wdis = IMX_GPIO_NR(7, 12), |
| .msata_en = GP_MSATA_SEL, |
| .nand = true, |
| }, |
| |
| /* GW553x */ |
| { |
| .gpio_pads = gw553x_gpio_pads, |
| .num_pads = ARRAY_SIZE(gw553x_gpio_pads)/2, |
| .dio_cfg = gw553x_dio, |
| .dio_num = ARRAY_SIZE(gw553x_dio), |
| .leds = { |
| IMX_GPIO_NR(4, 10), |
| IMX_GPIO_NR(4, 11), |
| }, |
| .pcie_rst = IMX_GPIO_NR(1, 0), |
| .vidin_en = IMX_GPIO_NR(5, 20), |
| .wdis = IMX_GPIO_NR(7, 12), |
| .otgpwr_en = IMX_GPIO_NR(3, 22), |
| .vsel_pin = IMX_GPIO_NR(6, 14), |
| .mmc_cd = IMX_GPIO_NR(7, 0), |
| .nand = true, |
| }, |
| |
| /* GW560x */ |
| { |
| .gpio_pads = gw560x_gpio_pads, |
| .num_pads = ARRAY_SIZE(gw560x_gpio_pads)/2, |
| .dio_cfg = gw560x_dio, |
| .dio_num = ARRAY_SIZE(gw560x_dio), |
| .leds = { |
| IMX_GPIO_NR(4, 6), |
| IMX_GPIO_NR(4, 7), |
| IMX_GPIO_NR(4, 15), |
| }, |
| .pcie_rst = IMX_GPIO_NR(4, 31), |
| .mezz_pwren = IMX_GPIO_NR(2, 19), |
| .mezz_irq = IMX_GPIO_NR(2, 18), |
| .rs232_en = GP_RS232_EN, |
| .vidin_en = IMX_GPIO_NR(3, 31), |
| .wdis = IMX_GPIO_NR(7, 12), |
| .otgpwr_en = IMX_GPIO_NR(4, 15), |
| .mmc_cd = IMX_GPIO_NR(7, 0), |
| }, |
| |
| /* GW5901 */ |
| { |
| .gpio_pads = gw5901_gpio_pads, |
| .num_pads = ARRAY_SIZE(gw5901_gpio_pads)/2, |
| .dio_cfg = gw5901_dio, |
| .leds = { |
| IMX_GPIO_NR(4, 15), |
| }, |
| .pcie_rst = IMX_GPIO_NR(1, 29), |
| .nand = true, |
| }, |
| |
| /* GW5902 */ |
| { |
| .gpio_pads = gw5902_gpio_pads, |
| .num_pads = ARRAY_SIZE(gw5902_gpio_pads)/2, |
| .dio_cfg = gw5902_dio, |
| .leds = { |
| IMX_GPIO_NR(4, 15), |
| }, |
| .pcie_rst = IMX_GPIO_NR(1, 0), |
| .rs232_en = GP_RS232_EN, |
| .otgpwr_en = IMX_GPIO_NR(3, 23), |
| .nand = true, |
| }, |
| |
| /* GW5903 */ |
| { |
| .gpio_pads = gw5903_gpio_pads, |
| .num_pads = ARRAY_SIZE(gw5903_gpio_pads)/2, |
| .dio_cfg = gw5903_dio, |
| .dio_num = ARRAY_SIZE(gw5903_dio), |
| .leds = { |
| IMX_GPIO_NR(6, 14), |
| }, |
| .otgpwr_en = IMX_GPIO_NR(4, 15), |
| .mmc_cd = IMX_GPIO_NR(6, 11), |
| }, |
| |
| /* GW5904 */ |
| { |
| .gpio_pads = gw5904_gpio_pads, |
| .num_pads = ARRAY_SIZE(gw5904_gpio_pads)/2, |
| .dio_cfg = gw5904_dio, |
| .dio_num = ARRAY_SIZE(gw5904_dio), |
| .leds = { |
| IMX_GPIO_NR(4, 6), |
| IMX_GPIO_NR(4, 7), |
| IMX_GPIO_NR(4, 15), |
| }, |
| .pcie_rst = IMX_GPIO_NR(1, 0), |
| .mezz_pwren = IMX_GPIO_NR(2, 19), |
| .mezz_irq = IMX_GPIO_NR(2, 18), |
| .otgpwr_en = IMX_GPIO_NR(3, 22), |
| }, |
| |
| /* GW5905 */ |
| { |
| .gpio_pads = gw5905_gpio_pads, |
| .num_pads = ARRAY_SIZE(gw5905_gpio_pads)/2, |
| .leds = { |
| IMX_GPIO_NR(6, 14), |
| }, |
| .pcie_rst = IMX_GPIO_NR(7, 11), |
| .wdis = IMX_GPIO_NR(7, 13), |
| }, |
| |
| /* GW5906 */ |
| { |
| .gpio_pads = gw552x_gpio_pads, |
| .num_pads = ARRAY_SIZE(gw552x_gpio_pads)/2, |
| .dio_cfg = gw5906_dio, |
| .dio_num = ARRAY_SIZE(gw5906_dio), |
| .leds = { |
| IMX_GPIO_NR(4, 6), |
| IMX_GPIO_NR(4, 7), |
| IMX_GPIO_NR(4, 15), |
| }, |
| .pcie_rst = IMX_GPIO_NR(1, 29), |
| .usb_sel = IMX_GPIO_NR(1, 7), |
| .wdis = IMX_GPIO_NR(7, 12), |
| .msata_en = GP_MSATA_SEL, |
| .nand = true, |
| }, |
| |
| /* GW5907 */ |
| { |
| .gpio_pads = gw51xx_gpio_pads, |
| .num_pads = ARRAY_SIZE(gw51xx_gpio_pads)/2, |
| .dio_cfg = gw51xx_dio, |
| .dio_num = ARRAY_SIZE(gw51xx_dio), |
| .leds = { |
| IMX_GPIO_NR(4, 6), |
| IMX_GPIO_NR(4, 10), |
| }, |
| .pcie_rst = IMX_GPIO_NR(1, 0), |
| .wdis = IMX_GPIO_NR(7, 12), |
| .nand = true, |
| }, |
| |
| /* GW5908 */ |
| { |
| .gpio_pads = gw53xx_gpio_pads, |
| .num_pads = ARRAY_SIZE(gw53xx_gpio_pads)/2, |
| .dio_cfg = gw53xx_dio, |
| .dio_num = ARRAY_SIZE(gw53xx_dio), |
| .leds = { |
| IMX_GPIO_NR(4, 6), |
| IMX_GPIO_NR(4, 7), |
| IMX_GPIO_NR(4, 15), |
| }, |
| .pcie_rst = IMX_GPIO_NR(1, 29), |
| .mezz_pwren = IMX_GPIO_NR(2, 19), |
| .mezz_irq = IMX_GPIO_NR(2, 18), |
| .gps_shdn = IMX_GPIO_NR(1, 27), |
| .vidin_en = IMX_GPIO_NR(3, 31), |
| .wdis = IMX_GPIO_NR(7, 12), |
| .msata_en = GP_MSATA_SEL, |
| .rs232_en = GP_RS232_EN, |
| }, |
| |
| /* GW5909 */ |
| { |
| .gpio_pads = gw5904_gpio_pads, |
| .num_pads = ARRAY_SIZE(gw5904_gpio_pads)/2, |
| .dio_cfg = gw5904_dio, |
| .dio_num = ARRAY_SIZE(gw5904_dio), |
| .leds = { |
| IMX_GPIO_NR(4, 6), |
| IMX_GPIO_NR(4, 7), |
| IMX_GPIO_NR(4, 15), |
| }, |
| .pcie_rst = IMX_GPIO_NR(1, 0), |
| .mezz_pwren = IMX_GPIO_NR(2, 19), |
| .mezz_irq = IMX_GPIO_NR(2, 18), |
| .otgpwr_en = IMX_GPIO_NR(3, 22), |
| }, |
| }; |
| |
| #define SETUP_GPIO_OUTPUT(gpio, name, level) \ |
| gpio_request(gpio, name); \ |
| gpio_direction_output(gpio, level); |
| #define SETUP_GPIO_INPUT(gpio, name) \ |
| gpio_request(gpio, name); \ |
| gpio_direction_input(gpio); |
| void setup_iomux_gpio(int board, struct ventana_board_info *info) |
| { |
| int i; |
| |
| if (board >= GW_UNKNOWN) |
| return; |
| |
| /* board specific iomux */ |
| imx_iomux_v3_setup_multiple_pads(gpio_cfg[board].gpio_pads, |
| gpio_cfg[board].num_pads); |
| |
| /* RS232_EN# */ |
| if (gpio_cfg[board].rs232_en) { |
| gpio_request(gpio_cfg[board].rs232_en, "rs232_en#"); |
| gpio_direction_output(gpio_cfg[board].rs232_en, 0); |
| } |
| |
| /* GW522x Uses GPIO3_IO23 for PCIE_RST# */ |
| if (board == GW52xx && info->model[4] == '2') |
| gpio_cfg[board].pcie_rst = IMX_GPIO_NR(3, 23); |
| |
| /* assert PCI_RST# */ |
| gpio_request(gpio_cfg[board].pcie_rst, "pci_rst#"); |
| gpio_direction_output(gpio_cfg[board].pcie_rst, 0); |
| |
| /* turn off (active-high) user LED's */ |
| for (i = 0; i < ARRAY_SIZE(gpio_cfg[board].leds); i++) { |
| char name[16]; |
| if (gpio_cfg[board].leds[i]) { |
| sprintf(name, "led_user%d", i); |
| gpio_request(gpio_cfg[board].leds[i], name); |
| gpio_direction_output(gpio_cfg[board].leds[i], 1); |
| } |
| } |
| |
| /* MSATA Enable - default to PCI */ |
| if (gpio_cfg[board].msata_en) { |
| gpio_request(gpio_cfg[board].msata_en, "msata_en"); |
| gpio_direction_output(gpio_cfg[board].msata_en, 0); |
| } |
| |
| /* Expansion Mezzanine IO */ |
| if (gpio_cfg[board].mezz_pwren) { |
| gpio_request(gpio_cfg[board].mezz_pwren, "mezz_pwr"); |
| gpio_direction_output(gpio_cfg[board].mezz_pwren, 0); |
| } |
| if (gpio_cfg[board].mezz_irq) { |
| gpio_request(gpio_cfg[board].mezz_irq, "mezz_irq#"); |
| gpio_direction_input(gpio_cfg[board].mezz_irq); |
| } |
| |
| /* RS485 Transmit Enable */ |
| if (gpio_cfg[board].rs485en) { |
| gpio_request(gpio_cfg[board].rs485en, "rs485_en"); |
| gpio_direction_output(gpio_cfg[board].rs485en, 0); |
| } |
| |
| /* GPS_SHDN */ |
| if (gpio_cfg[board].gps_shdn) { |
| gpio_request(gpio_cfg[board].gps_shdn, "gps_shdn"); |
| gpio_direction_output(gpio_cfg[board].gps_shdn, 1); |
| } |
| |
| /* Analog video codec power enable */ |
| if (gpio_cfg[board].vidin_en) { |
| gpio_request(gpio_cfg[board].vidin_en, "anavidin_en"); |
| gpio_direction_output(gpio_cfg[board].vidin_en, 1); |
| } |
| |
| /* DIOI2C_DIS# */ |
| if (gpio_cfg[board].dioi2c_en) { |
| gpio_request(gpio_cfg[board].dioi2c_en, "dioi2c_dis#"); |
| gpio_direction_output(gpio_cfg[board].dioi2c_en, 0); |
| } |
| |
| /* PCICK_SSON: disable spread-spectrum clock */ |
| if (gpio_cfg[board].pcie_sson) { |
| gpio_request(gpio_cfg[board].pcie_sson, "pci_sson"); |
| gpio_direction_output(gpio_cfg[board].pcie_sson, 0); |
| } |
| |
| /* USBOTG mux routing */ |
| if (gpio_cfg[board].usb_sel) { |
| gpio_request(gpio_cfg[board].usb_sel, "usb_pcisel"); |
| gpio_direction_output(gpio_cfg[board].usb_sel, 0); |
| } |
| |
| /* PCISKT_WDIS# (Wireless disable GPIO to miniPCIe sockets) */ |
| if (gpio_cfg[board].wdis) { |
| gpio_request(gpio_cfg[board].wdis, "wlan_dis"); |
| gpio_direction_output(gpio_cfg[board].wdis, 1); |
| } |
| |
| /* OTG power off */ |
| if (gpio_cfg[board].otgpwr_en) { |
| gpio_request(gpio_cfg[board].otgpwr_en, "usbotg_pwr"); |
| gpio_direction_output(gpio_cfg[board].otgpwr_en, 0); |
| } |
| |
| /* sense vselect pin to see if we support uhs-i */ |
| if (gpio_cfg[board].vsel_pin) { |
| gpio_request(gpio_cfg[board].vsel_pin, "sd3_vselect"); |
| gpio_direction_input(gpio_cfg[board].vsel_pin); |
| gpio_cfg[board].usd_vsel = !gpio_get_value(gpio_cfg[board].vsel_pin); |
| } |
| |
| /* microSD CD */ |
| if (gpio_cfg[board].mmc_cd) { |
| gpio_request(gpio_cfg[board].mmc_cd, "sd_cd"); |
| gpio_direction_input(gpio_cfg[board].mmc_cd); |
| } |
| |
| /* Anything else board specific */ |
| switch(board) { |
| case GW560x: |
| gpio_request(IMX_GPIO_NR(4, 26), "12p0_en"); |
| gpio_direction_output(IMX_GPIO_NR(4, 26), 1); |
| break; |
| case GW5901: |
| SETUP_GPIO_OUTPUT(IMX_GPIO_NR(1, 2), "can_stby", 0); |
| break; |
| case GW5902: |
| SETUP_GPIO_OUTPUT(IMX_GPIO_NR(1, 2), "can1_stby", 0); |
| SETUP_GPIO_OUTPUT(IMX_GPIO_NR(7, 3), "can2_stby", 0); |
| SETUP_GPIO_OUTPUT(IMX_GPIO_NR(7, 12), "5P0V_EN", 1); |
| break; |
| case GW5903: |
| gpio_request(IMX_GPIO_NR(3, 31) , "usbh1-ehci_pwr"); |
| gpio_direction_output(IMX_GPIO_NR(3, 31), 1); |
| gpio_request(IMX_GPIO_NR(4, 15) , "usbh2-otg_pwr"); |
| gpio_direction_output(IMX_GPIO_NR(4, 15), 1); |
| gpio_request(IMX_GPIO_NR(4, 7) , "usbdpc_pwr"); |
| gpio_direction_output(IMX_GPIO_NR(4, 15), 1); |
| gpio_request(IMX_GPIO_NR(1, 25) , "rgmii_en"); |
| gpio_direction_output(IMX_GPIO_NR(1, 25), 1); |
| gpio_request(IMX_GPIO_NR(4, 6) , "touch_irq#"); |
| gpio_direction_input(IMX_GPIO_NR(4, 6)); |
| gpio_request(IMX_GPIO_NR(4, 8) , "touch_rst"); |
| gpio_direction_output(IMX_GPIO_NR(4, 8), 1); |
| gpio_request(IMX_GPIO_NR(1, 7) , "bklt_12ven"); |
| gpio_direction_output(IMX_GPIO_NR(1, 7), 1); |
| break; |
| case GW5909: |
| case GW5904: |
| gpio_request(IMX_GPIO_NR(4, 23), "rs485_en"); |
| gpio_direction_output(IMX_GPIO_NR(4, 23), 0); |
| gpio_request(IMX_GPIO_NR(5, 11), "skt1_wdis#"); |
| gpio_direction_output(IMX_GPIO_NR(5, 11), 1); |
| gpio_request(IMX_GPIO_NR(5, 12), "skt1_rst#"); |
| gpio_direction_output(IMX_GPIO_NR(5, 12), 1); |
| gpio_request(IMX_GPIO_NR(5, 13), "skt2_wdis#"); |
| gpio_direction_output(IMX_GPIO_NR(5, 13), 1); |
| gpio_request(IMX_GPIO_NR(1, 15), "m2_off#"); |
| gpio_direction_output(IMX_GPIO_NR(1, 15), 1); |
| gpio_request(IMX_GPIO_NR(1, 14), "m2_wdis#"); |
| gpio_direction_output(IMX_GPIO_NR(1, 14), 1); |
| gpio_request(IMX_GPIO_NR(1, 13), "m2_rst#"); |
| gpio_direction_output(IMX_GPIO_NR(1, 13), 1); |
| break; |
| case GW5905: |
| SETUP_GPIO_OUTPUT(IMX_GPIO_NR(1, 7), "usb_pcisel", 0); |
| SETUP_GPIO_OUTPUT(IMX_GPIO_NR(1, 9), "lvds_cabc", 1); |
| SETUP_GPIO_OUTPUT(IMX_GPIO_NR(1, 14), "mipi_pdwn", 1); |
| SETUP_GPIO_OUTPUT(IMX_GPIO_NR(1, 15), "mipi_rst#", 0); |
| SETUP_GPIO_OUTPUT(IMX_GPIO_NR(2, 3), "emmy_pdwn#", 1); |
| SETUP_GPIO_OUTPUT(IMX_GPIO_NR(4, 5), "spk_shdn#", 0); |
| SETUP_GPIO_OUTPUT(IMX_GPIO_NR(4, 8), "touch_rst", 0); |
| SETUP_GPIO_OUTPUT(IMX_GPIO_NR(4, 6), "touch_irq", 0); |
| SETUP_GPIO_OUTPUT(IMX_GPIO_NR(5, 5), "flash_en1", 0); |
| SETUP_GPIO_OUTPUT(IMX_GPIO_NR(5, 6), "flash_en2", 0); |
| SETUP_GPIO_OUTPUT(IMX_GPIO_NR(5, 14), "dect_rst#", 1); |
| SETUP_GPIO_OUTPUT(IMX_GPIO_NR(5, 17), "codec_rst#", 0); |
| SETUP_GPIO_OUTPUT(IMX_GPIO_NR(5, 26), "imu_den", 1); |
| SETUP_GPIO_OUTPUT(IMX_GPIO_NR(7, 12), "lvds_cabc", 0); |
| mdelay(100); |
| /* |
| * gauruntee touch controller comes out of reset with INT |
| * low for address |
| */ |
| SETUP_GPIO_OUTPUT(IMX_GPIO_NR(4, 8), "touch_rst", 1); |
| break; |
| } |
| } |
| |
| /* setup GPIO pinmux and default configuration per baseboard and env */ |
| void setup_board_gpio(int board, struct ventana_board_info *info) |
| { |
| const char *s; |
| char arg[10]; |
| size_t len; |
| int i; |
| int quiet = simple_strtol(env_get("quiet"), NULL, 10); |
| |
| if (board >= GW_UNKNOWN) |
| return; |
| |
| /* RS232_EN# */ |
| if (gpio_cfg[board].rs232_en) { |
| gpio_direction_output(gpio_cfg[board].rs232_en, |
| (hwconfig("rs232")) ? 0 : 1); |
| } |
| |
| /* MSATA Enable */ |
| if (gpio_cfg[board].msata_en && is_cpu_type(MXC_CPU_MX6Q)) { |
| gpio_direction_output(GP_MSATA_SEL, |
| (hwconfig("msata")) ? 1 : 0); |
| } |
| |
| /* USBOTG Select (PCISKT or FrontPanel) */ |
| if (gpio_cfg[board].usb_sel) { |
| gpio_direction_output(gpio_cfg[board].usb_sel, |
| (hwconfig("usb_pcisel")) ? 1 : 0); |
| } |
| |
| /* |
| * Configure DIO pinmux/padctl registers |
| * see IMX6DQRM/IMX6SDLRM IOMUXC_SW_PAD_CTL_PAD_* register definitions |
| */ |
| for (i = 0; i < gpio_cfg[board].dio_num; i++) { |
| struct dio_cfg *cfg = &gpio_cfg[board].dio_cfg[i]; |
| iomux_v3_cfg_t ctrl = DIO_PAD_CFG; |
| unsigned cputype = is_cpu_type(MXC_CPU_MX6Q) ? 0 : 1; |
| |
| if (!cfg->gpio_padmux[0] && !cfg->gpio_padmux[1]) |
| continue; |
| sprintf(arg, "dio%d", i); |
| if (!hwconfig(arg)) |
| continue; |
| s = hwconfig_subarg(arg, "padctrl", &len); |
| if (s) { |
| ctrl = MUX_PAD_CTRL(simple_strtoul(s, NULL, 16) |
| & 0x1ffff) | MUX_MODE_SION; |
| } |
| if (hwconfig_subarg_cmp(arg, "mode", "gpio")) { |
| if (!quiet) { |
| printf("DIO%d: GPIO%d_IO%02d (gpio-%d)\n", i, |
| (cfg->gpio_param/32)+1, |
| cfg->gpio_param%32, |
| cfg->gpio_param); |
| } |
| imx_iomux_v3_setup_pad(cfg->gpio_padmux[cputype] | |
| ctrl); |
| gpio_requestf(cfg->gpio_param, "dio%d", i); |
| gpio_direction_input(cfg->gpio_param); |
| } else if (hwconfig_subarg_cmp(arg, "mode", "pwm") && |
| cfg->pwm_padmux) { |
| if (!cfg->pwm_param) { |
| printf("DIO%d: Error: pwm config invalid\n", |
| i); |
| continue; |
| } |
| if (!quiet) |
| printf("DIO%d: pwm%d\n", i, cfg->pwm_param); |
| imx_iomux_v3_setup_pad(cfg->pwm_padmux[cputype] | |
| MUX_PAD_CTRL(ctrl)); |
| } |
| } |
| |
| if (!quiet) { |
| if (gpio_cfg[board].msata_en && is_cpu_type(MXC_CPU_MX6Q)) { |
| printf("MSATA: %s\n", (hwconfig("msata") ? |
| "enabled" : "disabled")); |
| } |
| if (gpio_cfg[board].rs232_en) { |
| printf("RS232: %s\n", (hwconfig("rs232")) ? |
| "enabled" : "disabled"); |
| } |
| } |
| } |
| |
| /* setup board specific PMIC */ |
| void setup_pmic(void) |
| { |
| struct pmic *p; |
| struct ventana_board_info ventana_info; |
| int board = read_eeprom(CONFIG_I2C_GSC, &ventana_info); |
| const int i2c_pmic = 1; |
| u32 reg; |
| |
| i2c_set_bus_num(i2c_pmic); |
| |
| /* configure PFUZE100 PMIC */ |
| if (!i2c_probe(CONFIG_POWER_PFUZE100_I2C_ADDR)) { |
| debug("probed PFUZE100@0x%x\n", CONFIG_POWER_PFUZE100_I2C_ADDR); |
| power_pfuze100_init(i2c_pmic); |
| p = pmic_get("PFUZE100"); |
| if (p && !pmic_probe(p)) { |
| pmic_reg_read(p, PFUZE100_DEVICEID, ®); |
| printf("PMIC: PFUZE100 ID=0x%02x\n", reg); |
| |
| /* Set VGEN1 to 1.5V and enable */ |
| pmic_reg_read(p, PFUZE100_VGEN1VOL, ®); |
| reg &= ~(LDO_VOL_MASK); |
| reg |= (LDOA_1_50V | LDO_EN); |
| pmic_reg_write(p, PFUZE100_VGEN1VOL, reg); |
| |
| /* Set SWBST to 5.0V and enable */ |
| pmic_reg_read(p, PFUZE100_SWBSTCON1, ®); |
| reg &= ~(SWBST_MODE_MASK | SWBST_VOL_MASK); |
| reg |= (SWBST_5_00V | (SWBST_MODE_AUTO << SWBST_MODE_SHIFT)); |
| pmic_reg_write(p, PFUZE100_SWBSTCON1, reg); |
| } |
| } |
| |
| /* configure LTC3676 PMIC */ |
| else if (!i2c_probe(CONFIG_POWER_LTC3676_I2C_ADDR)) { |
| debug("probed LTC3676@0x%x\n", CONFIG_POWER_LTC3676_I2C_ADDR); |
| power_ltc3676_init(i2c_pmic); |
| p = pmic_get("LTC3676_PMIC"); |
| if (!p || pmic_probe(p)) |
| return; |
| puts("PMIC: LTC3676\n"); |
| /* |
| * set board-specific scalar for max CPU frequency |
| * per CPU based on the LDO enabled Operating Ranges |
| * defined in the respective IMX6DQ and IMX6SDL |
| * datasheets. The voltage resulting from the R1/R2 |
| * feedback inputs on Ventana is 1308mV. Note that this |
| * is a bit shy of the Vmin of 1350mV in the datasheet |
| * for LDO enabled mode but is as high as we can go. |
| */ |
| switch (board) { |
| case GW560x: |
| /* mask PGOOD during SW3 transition */ |
| pmic_reg_write(p, LTC3676_DVB3B, |
| 0x1f | LTC3676_PGOOD_MASK); |
| /* set SW3 (VDD_ARM) */ |
| pmic_reg_write(p, LTC3676_DVB3A, 0x1f); |
| break; |
| case GW5903: |
| /* mask PGOOD during SW3 transition */ |
| pmic_reg_write(p, LTC3676_DVB3B, |
| 0x1f | LTC3676_PGOOD_MASK); |
| /* set SW3 (VDD_ARM) */ |
| pmic_reg_write(p, LTC3676_DVB3A, 0x1f); |
| |
| /* mask PGOOD during SW4 transition */ |
| pmic_reg_write(p, LTC3676_DVB4B, |
| 0x1f | LTC3676_PGOOD_MASK); |
| /* set SW4 (VDD_SOC) */ |
| pmic_reg_write(p, LTC3676_DVB4A, 0x1f); |
| break; |
| case GW5905: |
| /* mask PGOOD during SW1 transition */ |
| pmic_reg_write(p, LTC3676_DVB1B, |
| 0x1f | LTC3676_PGOOD_MASK); |
| /* set SW1 (VDD_ARM) */ |
| pmic_reg_write(p, LTC3676_DVB1A, 0x1f); |
| |
| /* mask PGOOD during SW3 transition */ |
| pmic_reg_write(p, LTC3676_DVB3B, |
| 0x1f | LTC3676_PGOOD_MASK); |
| /* set SW3 (VDD_SOC) */ |
| pmic_reg_write(p, LTC3676_DVB3A, 0x1f); |
| break; |
| default: |
| /* mask PGOOD during SW1 transition */ |
| pmic_reg_write(p, LTC3676_DVB1B, |
| 0x1f | LTC3676_PGOOD_MASK); |
| /* set SW1 (VDD_SOC) */ |
| pmic_reg_write(p, LTC3676_DVB1A, 0x1f); |
| |
| /* mask PGOOD during SW3 transition */ |
| pmic_reg_write(p, LTC3676_DVB3B, |
| 0x1f | LTC3676_PGOOD_MASK); |
| /* set SW3 (VDD_ARM) */ |
| pmic_reg_write(p, LTC3676_DVB3A, 0x1f); |
| } |
| } |
| } |
| |
| #ifdef CONFIG_FSL_ESDHC |
| static struct fsl_esdhc_cfg usdhc_cfg[2]; |
| |
| int board_mmc_init(bd_t *bis) |
| { |
| struct ventana_board_info ventana_info; |
| int board_type = read_eeprom(CONFIG_I2C_GSC, &ventana_info); |
| int ret; |
| |
| switch (board_type) { |
| case GW52xx: |
| case GW53xx: |
| case GW54xx: |
| case GW553x: |
| /* usdhc3: 4bit microSD */ |
| SETUP_IOMUX_PADS(usdhc3_pads); |
| usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR; |
| usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); |
| usdhc_cfg[0].max_bus_width = 4; |
| return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); |
| case GW560x: |
| /* usdhc2: 8-bit eMMC */ |
| SETUP_IOMUX_PADS(gw560x_emmc_sd2_pads); |
| usdhc_cfg[0].esdhc_base = USDHC2_BASE_ADDR; |
| usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); |
| usdhc_cfg[0].max_bus_width = 8; |
| ret = fsl_esdhc_initialize(bis, &usdhc_cfg[0]); |
| if (ret) |
| return ret; |
| /* usdhc3: 4-bit microSD */ |
| SETUP_IOMUX_PADS(usdhc3_pads); |
| usdhc_cfg[1].esdhc_base = USDHC3_BASE_ADDR; |
| usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); |
| usdhc_cfg[1].max_bus_width = 4; |
| return fsl_esdhc_initialize(bis, &usdhc_cfg[1]); |
| case GW5903: |
| /* usdhc3: 8-bit eMMC */ |
| SETUP_IOMUX_PADS(gw5904_emmc_pads); |
| usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR; |
| usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); |
| usdhc_cfg[0].max_bus_width = 8; |
| ret = fsl_esdhc_initialize(bis, &usdhc_cfg[0]); |
| if (ret) |
| return ret; |
| /* usdhc2: 4-bit microSD */ |
| SETUP_IOMUX_PADS(gw5904_mmc_pads); |
| usdhc_cfg[1].esdhc_base = USDHC2_BASE_ADDR; |
| usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); |
| usdhc_cfg[1].max_bus_width = 4; |
| return fsl_esdhc_initialize(bis, &usdhc_cfg[1]); |
| case GW5904: |
| case GW5905: |
| case GW5909: |
| /* usdhc3: 8bit eMMC */ |
| SETUP_IOMUX_PADS(gw5904_emmc_pads); |
| usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR; |
| usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); |
| usdhc_cfg[0].max_bus_width = 8; |
| return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); |
| default: |
| /* doesn't have MMC */ |
| return -1; |
| } |
| } |
| |
| int board_mmc_getcd(struct mmc *mmc) |
| { |
| struct ventana_board_info ventana_info; |
| struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; |
| int board = read_eeprom(CONFIG_I2C_GSC, &ventana_info); |
| int gpio = gpio_cfg[board].mmc_cd; |
| |
| /* Card Detect */ |
| switch (board) { |
| case GW560x: |
| /* emmc is always present */ |
| if (cfg->esdhc_base == USDHC2_BASE_ADDR) |
| return 1; |
| break; |
| case GW5903: |
| case GW5904: |
| case GW5905: |
| case GW5909: |
| /* emmc is always present */ |
| if (cfg->esdhc_base == USDHC3_BASE_ADDR) |
| return 1; |
| break; |
| } |
| |
| if (gpio) { |
| debug("%s: gpio%d=%d\n", __func__, gpio, gpio_get_value(gpio)); |
| return !gpio_get_value(gpio); |
| } |
| |
| return -1; |
| } |
| |
| #endif /* CONFIG_FSL_ESDHC */ |