| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2013 Freescale Semiconductor, Inc. |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <i2c.h> |
| #include <netdev.h> |
| #include <linux/compiler.h> |
| #include <asm/mmu.h> |
| #include <asm/processor.h> |
| #include <asm/cache.h> |
| #include <asm/immap_85xx.h> |
| #include <asm/fsl_law.h> |
| #include <asm/fsl_serdes.h> |
| #include <asm/fsl_liodn.h> |
| #include <fm_eth.h> |
| #include <hwconfig.h> |
| |
| #include "../common/sleep.h" |
| #include "../common/qixis.h" |
| #include "t1040qds.h" |
| #include "t1040qds_qixis.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| int checkboard(void) |
| { |
| char buf[64]; |
| u8 sw; |
| struct cpu_type *cpu = gd->arch.cpu; |
| static const char *const freq[] = {"100", "125", "156.25", "161.13", |
| "122.88", "122.88", "122.88"}; |
| int clock; |
| |
| printf("Board: %sQDS, ", cpu->name); |
| printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, ", |
| QIXIS_READ(id), QIXIS_READ(arch)); |
| |
| sw = QIXIS_READ(brdcfg[0]); |
| sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT; |
| |
| if (sw < 0x8) |
| printf("vBank: %d\n", sw); |
| else if (sw == 0x8) |
| puts("PromJet\n"); |
| else if (sw == 0x9) |
| puts("NAND\n"); |
| else if (sw == 0x15) |
| printf("IFCCard\n"); |
| else |
| printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH); |
| |
| printf("FPGA: v%d (%s), build %d", |
| (int)QIXIS_READ(scver), qixis_read_tag(buf), |
| (int)qixis_read_minor()); |
| /* the timestamp string contains "\n" at the end */ |
| printf(" on %s", qixis_read_time(buf)); |
| |
| /* |
| * Display the actual SERDES reference clocks as configured by the |
| * dip switches on the board. Note that the SWx registers could |
| * technically be set to force the reference clocks to match the |
| * values that the SERDES expects (or vice versa). For now, however, |
| * we just display both values and hope the user notices when they |
| * don't match. |
| */ |
| puts("SERDES Reference: "); |
| sw = QIXIS_READ(brdcfg[2]); |
| clock = (sw >> 6) & 3; |
| printf("Clock1=%sMHz ", freq[clock]); |
| clock = (sw >> 4) & 3; |
| printf("Clock2=%sMHz\n", freq[clock]); |
| |
| return 0; |
| } |
| |
| int select_i2c_ch_pca9547(u8 ch) |
| { |
| int ret; |
| |
| ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1); |
| if (ret) { |
| puts("PCA: failed to select proper channel\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void qe_board_setup(void) |
| { |
| u8 brdcfg15, brdcfg9; |
| |
| if (hwconfig("qe") && hwconfig("tdm")) { |
| brdcfg15 = QIXIS_READ(brdcfg[15]); |
| /* |
| * TDMRiser uses QE-TDM |
| * Route QE_TDM signals to TDM Riser slot |
| */ |
| QIXIS_WRITE(brdcfg[15], brdcfg15 | 7); |
| } else if (hwconfig("qe") && hwconfig("uart")) { |
| brdcfg15 = QIXIS_READ(brdcfg[15]); |
| brdcfg9 = QIXIS_READ(brdcfg[9]); |
| /* |
| * Route QE_TDM signals to UCC |
| * ProfiBus controlled by UCC3 |
| */ |
| brdcfg15 &= 0xfc; |
| QIXIS_WRITE(brdcfg[15], brdcfg15 | 2); |
| QIXIS_WRITE(brdcfg[9], brdcfg9 | 4); |
| } |
| } |
| |
| int board_early_init_f(void) |
| { |
| #if defined(CONFIG_DEEP_SLEEP) |
| if (is_warm_boot()) |
| fsl_dp_disable_console(); |
| #endif |
| |
| return 0; |
| } |
| |
| int board_early_init_r(void) |
| { |
| #ifdef CONFIG_SYS_FLASH_BASE |
| const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; |
| int flash_esel = find_tlb_idx((void *)flashbase, 1); |
| |
| /* |
| * Remap Boot flash + PROMJET region to caching-inhibited |
| * so that flash can be erased properly. |
| */ |
| |
| /* Flush d-cache and invalidate i-cache of any FLASH data */ |
| flush_dcache(); |
| invalidate_icache(); |
| |
| if (flash_esel == -1) { |
| /* very unlikely unless something is messed up */ |
| puts("Error: Could not find TLB for FLASH BASE\n"); |
| flash_esel = 2; /* give our best effort to continue */ |
| } else { |
| /* invalidate existing TLB entry for flash + promjet */ |
| disable_tlb(flash_esel); |
| } |
| |
| set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, |
| MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, |
| 0, flash_esel, BOOKE_PAGESZ_256M, 1); |
| #endif |
| select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); |
| |
| return 0; |
| } |
| |
| unsigned long get_board_sys_clk(void) |
| { |
| u8 sysclk_conf = QIXIS_READ(brdcfg[1]); |
| |
| switch (sysclk_conf & 0x0F) { |
| case QIXIS_SYSCLK_64: |
| return 64000000; |
| case QIXIS_SYSCLK_83: |
| return 83333333; |
| case QIXIS_SYSCLK_100: |
| return 100000000; |
| case QIXIS_SYSCLK_125: |
| return 125000000; |
| case QIXIS_SYSCLK_133: |
| return 133333333; |
| case QIXIS_SYSCLK_150: |
| return 150000000; |
| case QIXIS_SYSCLK_160: |
| return 160000000; |
| case QIXIS_SYSCLK_166: |
| return 166666666; |
| } |
| return 66666666; |
| } |
| |
| unsigned long get_board_ddr_clk(void) |
| { |
| u8 ddrclk_conf = QIXIS_READ(brdcfg[1]); |
| |
| switch ((ddrclk_conf & 0x30) >> 4) { |
| case QIXIS_DDRCLK_100: |
| return 100000000; |
| case QIXIS_DDRCLK_125: |
| return 125000000; |
| case QIXIS_DDRCLK_133: |
| return 133333333; |
| } |
| return 66666666; |
| } |
| |
| #define NUM_SRDS_BANKS 2 |
| int misc_init_r(void) |
| { |
| u8 sw; |
| serdes_corenet_t *srds_regs = |
| (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR; |
| u32 actual[NUM_SRDS_BANKS] = { 0 }; |
| int i; |
| |
| sw = QIXIS_READ(brdcfg[2]); |
| for (i = 0; i < NUM_SRDS_BANKS; i++) { |
| unsigned int clock = (sw >> (6 - 2 * i)) & 3; |
| switch (clock) { |
| case 0: |
| actual[i] = SRDS_PLLCR0_RFCK_SEL_100; |
| break; |
| case 1: |
| actual[i] = SRDS_PLLCR0_RFCK_SEL_125; |
| break; |
| case 2: |
| actual[i] = SRDS_PLLCR0_RFCK_SEL_156_25; |
| break; |
| } |
| } |
| |
| puts("SerDes1"); |
| for (i = 0; i < NUM_SRDS_BANKS; i++) { |
| u32 pllcr0 = srds_regs->bank[i].pllcr0; |
| u32 expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK; |
| if (expected != actual[i]) { |
| printf("expects ref clk%d %sMHz, but actual is %sMHz\n", |
| i + 1, serdes_clock_to_string(expected), |
| serdes_clock_to_string(actual[i])); |
| } |
| } |
| |
| qe_board_setup(); |
| |
| return 0; |
| } |
| |
| int ft_board_setup(void *blob, bd_t *bd) |
| { |
| phys_addr_t base; |
| phys_size_t size; |
| |
| ft_cpu_setup(blob, bd); |
| |
| base = env_get_bootm_low(); |
| size = env_get_bootm_size(); |
| |
| fdt_fixup_memory(blob, (u64)base, (u64)size); |
| |
| #ifdef CONFIG_PCI |
| pci_of_setup(blob, bd); |
| #endif |
| |
| fdt_fixup_liodn(blob); |
| |
| #ifdef CONFIG_HAS_FSL_DR_USB |
| fsl_fdt_fixup_dr_usb(blob, bd); |
| #endif |
| |
| #ifdef CONFIG_SYS_DPAA_FMAN |
| fdt_fixup_fman_ethernet(blob); |
| fdt_fixup_board_enet(blob); |
| #endif |
| |
| return 0; |
| } |
| |
| void qixis_dump_switch(void) |
| { |
| int i, nr_of_cfgsw; |
| |
| QIXIS_WRITE(cms[0], 0x00); |
| nr_of_cfgsw = QIXIS_READ(cms[1]); |
| |
| puts("DIP switch settings dump:\n"); |
| for (i = 1; i <= nr_of_cfgsw; i++) { |
| QIXIS_WRITE(cms[0], i); |
| printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1])); |
| } |
| } |
| |
| int board_need_mem_reset(void) |
| { |
| return 1; |
| } |