include/dwmmc.h - u-boot-mtk - Git at Google

 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2012 SAMSUNG Electronics
  * Jaehoon Chung <jh80.chung@samsung.com>
  */

 #ifndef __DWMMC_HW_H
 #define __DWMMC_HW_H

 #include <asm/io.h>
 #include <mmc.h>

 #define DWMCI_CTRL		0x000
 #define	DWMCI_PWREN		0x004
 #define DWMCI_CLKDIV		0x008
 #define DWMCI_CLKSRC		0x00C
 #define DWMCI_CLKENA		0x010
 #define DWMCI_TMOUT		0x014
 #define DWMCI_CTYPE		0x018
 #define DWMCI_BLKSIZ		0x01C
 #define DWMCI_BYTCNT		0x020
 #define DWMCI_INTMASK		0x024
 #define DWMCI_CMDARG		0x028
 #define DWMCI_CMD		0x02C
 #define DWMCI_RESP0		0x030
 #define DWMCI_RESP1		0x034
 #define DWMCI_RESP2		0x038
 #define DWMCI_RESP3		0x03C
 #define DWMCI_MINTSTS		0x040
 #define DWMCI_RINTSTS		0x044
 #define DWMCI_STATUS		0x048
 #define DWMCI_FIFOTH		0x04C
 #define DWMCI_CDETECT		0x050
 #define DWMCI_WRTPRT		0x054
 #define DWMCI_GPIO		0x058
 #define DWMCI_TCMCNT		0x05C
 #define DWMCI_TBBCNT		0x060
 #define DWMCI_DEBNCE		0x064
 #define DWMCI_USRID		0x068
 #define DWMCI_VERID		0x06C
 #define DWMCI_HCON		0x070
 #define DWMCI_UHS_REG		0x074
 #define DWMCI_BMOD		0x080
 #define DWMCI_PLDMND		0x084
 #define DWMCI_DBADDR		0x088
 #define DWMCI_IDSTS		0x08C
 #define DWMCI_IDINTEN		0x090
 #define DWMCI_DSCADDR		0x094
 #define DWMCI_BUFADDR		0x098
 #define DWMCI_DATA		0x200

 /* Interrupt Mask register */
 #define DWMCI_INTMSK_ALL	0xffffffff
 #define DWMCI_INTMSK_RE		(1 << 1)
 #define DWMCI_INTMSK_CDONE	(1 << 2)
 #define DWMCI_INTMSK_DTO	(1 << 3)
 #define DWMCI_INTMSK_TXDR	(1 << 4)
 #define DWMCI_INTMSK_RXDR	(1 << 5)
 #define DWMCI_INTMSK_RCRC	(1 << 6)
 #define DWMCI_INTMSK_DCRC	(1 << 7)
 #define DWMCI_INTMSK_RTO	(1 << 8)
 #define DWMCI_INTMSK_DRTO	(1 << 9)
 #define DWMCI_INTMSK_HTO	(1 << 10)
 #define DWMCI_INTMSK_FRUN	(1 << 11)
 #define DWMCI_INTMSK_HLE	(1 << 12)
 #define DWMCI_INTMSK_SBE	(1 << 13)
 #define DWMCI_INTMSK_ACD	(1 << 14)
 #define DWMCI_INTMSK_EBE	(1 << 15)

 /* Raw interrupt Regsiter */
 #define DWMCI_DATA_ERR	(DWMCI_INTMSK_EBE | DWMCI_INTMSK_SBE | DWMCI_INTMSK_HLE |\
 			DWMCI_INTMSK_FRUN | DWMCI_INTMSK_EBE | DWMCI_INTMSK_DCRC)
 #define DWMCI_DATA_TOUT	(DWMCI_INTMSK_HTO | DWMCI_INTMSK_DRTO)
 /* CTRL register */
 #define DWMCI_CTRL_RESET	(1 << 0)
 #define DWMCI_CTRL_FIFO_RESET	(1 << 1)
 #define DWMCI_CTRL_DMA_RESET	(1 << 2)
 #define DWMCI_DMA_EN		(1 << 5)
 #define DWMCI_CTRL_SEND_AS_CCSD	(1 << 10)
 #define DWMCI_IDMAC_EN		(1 << 25)
 #define DWMCI_RESET_ALL		(DWMCI_CTRL_RESET | DWMCI_CTRL_FIFO_RESET |\
 				DWMCI_CTRL_DMA_RESET)

 /* CMD register */
 #define DWMCI_CMD_RESP_EXP	(1 << 6)
 #define DWMCI_CMD_RESP_LENGTH	(1 << 7)
 #define DWMCI_CMD_CHECK_CRC	(1 << 8)
 #define DWMCI_CMD_DATA_EXP	(1 << 9)
 #define DWMCI_CMD_RW		(1 << 10)
 #define DWMCI_CMD_SEND_STOP	(1 << 12)
 #define DWMCI_CMD_ABORT_STOP	(1 << 14)
 #define DWMCI_CMD_PRV_DAT_WAIT	(1 << 13)
 #define DWMCI_CMD_UPD_CLK	(1 << 21)
 #define DWMCI_CMD_USE_HOLD_REG	(1 << 29)
 #define DWMCI_CMD_START		(1 << 31)

 /* CLKENA register */
 #define DWMCI_CLKEN_ENABLE	(1 << 0)
 #define DWMCI_CLKEN_LOW_PWR	(1 << 16)

 /* Card-type registe */
 #define DWMCI_CTYPE_1BIT	0
 #define DWMCI_CTYPE_4BIT	(1 << 0)
 #define DWMCI_CTYPE_8BIT	(1 << 16)

 /* Status Register */
 #define DWMCI_FIFO_EMPTY	(1 << 2)
 #define DWMCI_FIFO_FULL		(1 << 3)
 #define DWMCI_BUSY		(1 << 9)
 #define DWMCI_FIFO_MASK		0x1fff
 #define DWMCI_FIFO_SHIFT	17

 /* FIFOTH Register */
 #define MSIZE(x)		((x) << 28)
 #define RX_WMARK(x)		((x) << 16)
 #define TX_WMARK(x)		(x)
 #define RX_WMARK_SHIFT		16
 #define RX_WMARK_MASK		(0xfff << RX_WMARK_SHIFT)

 #define DWMCI_IDMAC_OWN		(1 << 31)
 #define DWMCI_IDMAC_CH		(1 << 4)
 #define DWMCI_IDMAC_FS		(1 << 3)
 #define DWMCI_IDMAC_LD		(1 << 2)

 /*  Bus Mode Register */
 #define DWMCI_BMOD_IDMAC_RESET	(1 << 0)
 #define DWMCI_BMOD_IDMAC_FB	(1 << 1)
 #define DWMCI_BMOD_IDMAC_EN	(1 << 7)

 /* UHS register */
 #define DWMCI_DDR_MODE	(1 << 16)

 /* Internal IDMAC interrupt defines */
 #define DWMCI_IDINTEN_RI		BIT(1)
 #define DWMCI_IDINTEN_TI		BIT(0)

 #define DWMCI_IDINTEN_MASK	(DWMCI_IDINTEN_TI | \
 				 DWMCI_IDINTEN_RI)

 /* quirks */
 #define DWMCI_QUIRK_DISABLE_SMU		(1 << 0)

 /**
  * struct dwmci_host - Information about a designware MMC host
  *
  * @name:	Device name
  * @ioaddr:	Base I/O address of controller
  * @quirks:	Quick flags - see DWMCI_QUIRK_...
  * @caps:	Capabilities - see MMC_MODE_...
  * @bus_hz:	Bus speed in Hz, if @get_mmc_clk() is NULL
  * @div:	Arbitrary clock divider value for use by controller
  * @dev_index:	Arbitrary device index for use by controller
  * @dev_id:	Arbitrary device ID for use by controller
  * @buswidth:	Bus width in bits (8 or 4)
  * @fifoth_val:	Value for FIFOTH register (or 0 to leave unset)
  * @mmc:	Pointer to generic MMC structure for this device
  * @priv:	Private pointer for use by controller
  */
 struct dwmci_host {
 	const char *name;
 	void *ioaddr;
 	unsigned int quirks;
 	unsigned int caps;
 	unsigned int version;
 	unsigned int clock;
 	unsigned int bus_hz;
 	unsigned int div;
 	int dev_index;
 	int dev_id;
 	int buswidth;
 	u32 fifoth_val;
 	struct mmc *mmc;
 	void *priv;

 	void (*clksel)(struct dwmci_host *host);
 	void (*board_init)(struct dwmci_host *host);

 	/**
 	 * Get / set a particular MMC clock frequency
 	 *
 	 * This is used to request the current clock frequency of the clock
 	 * that drives the DWMMC peripheral. The caller will then use this
 	 * information to work out the divider it needs to achieve the
 	 * required MMC bus clock frequency. If you want to handle the
 	 * clock external to DWMMC, use @freq to select the frequency and
 	 * return that value too. Then DWMMC will put itself in bypass mode.
 	 *
 	 * @host:	DWMMC host
 	 * @freq:	Frequency the host is trying to achieve
 	 */
 	unsigned int (*get_mmc_clk)(struct dwmci_host *host, uint freq);
 #ifndef CONFIG_BLK
 	struct mmc_config cfg;
 #endif

 	/* use fifo mode to read and write data */
 	bool fifo_mode;
 };

 struct dwmci_idmac {
 	u32 flags;
 	u32 cnt;
 	u32 addr;
 	u32 next_addr;
 } __aligned(ARCH_DMA_MINALIGN);

 static inline void dwmci_writel(struct dwmci_host *host, int reg, u32 val)
 {
 	writel(val, host->ioaddr + reg);
 }

 static inline void dwmci_writew(struct dwmci_host *host, int reg, u16 val)
 {
 	writew(val, host->ioaddr + reg);
 }

 static inline void dwmci_writeb(struct dwmci_host *host, int reg, u8 val)
 {
 	writeb(val, host->ioaddr + reg);
 }
 static inline u32 dwmci_readl(struct dwmci_host *host, int reg)
 {
 	return readl(host->ioaddr + reg);
 }

 static inline u16 dwmci_readw(struct dwmci_host *host, int reg)
 {
 	return readw(host->ioaddr + reg);
 }

 static inline u8 dwmci_readb(struct dwmci_host *host, int reg)
 {
 	return readb(host->ioaddr + reg);
 }

 #ifdef CONFIG_BLK
 /**
  * dwmci_setup_cfg() - Set up the configuration for DWMMC
  *
  * This is used to set up a DWMMC device when you are using CONFIG_BLK.
  *
  * This should be called from your MMC driver's probe() method once you have
  * the information required.
  *
  * Generally your driver will have a platform data structure which holds both
  * the configuration (struct mmc_config) and the MMC device info (struct mmc).
  * For example:
  *
  * struct rockchip_mmc_plat {
  *	struct mmc_config cfg;
  *	struct mmc mmc;
  * };
  *
  * ...
  *
  * Inside U_BOOT_DRIVER():
  *	.platdata_auto_alloc_size = sizeof(struct rockchip_mmc_plat),
  *
  * To access platform data:
  *	struct rockchip_mmc_plat *plat = dev_get_platdata(dev);
  *
  * See rockchip_dw_mmc.c for an example.
  *
  * @cfg:	Configuration structure to fill in (generally &plat->mmc)
  * @host:	DWMMC host
  * @max_clk:	Maximum supported clock speed in HZ (e.g. 150000000)
  * @min_clk:	Minimum supported clock speed in HZ (e.g. 400000)
  */
 void dwmci_setup_cfg(struct mmc_config *cfg, struct dwmci_host *host,
 		u32 max_clk, u32 min_clk);

 /**
  * dwmci_bind() - Set up a new MMC block device
  *
  * This is used to set up a DWMMC block device when you are using CONFIG_BLK.
  * It should be called from your driver's bind() method.
  *
  * See rockchip_dw_mmc.c for an example.
  *
  * @dev:	Device to set up
  * @mmc:	Pointer to mmc structure (normally &plat->mmc)
  * @cfg:	Empty configuration structure (generally &plat->cfg). This is
  *		normally all zeroes at this point. The only purpose of passing
  *		this in is to set mmc->cfg to it.
  * @return 0 if OK, -ve if the block device could not be created
  */
 int dwmci_bind(struct udevice *dev, struct mmc *mmc, struct mmc_config *cfg);

 #else
 /**
  * add_dwmci() - Add a new DWMMC interface
  *
  * This is used when you are not using CONFIG_BLK. Convert your driver over!
  *
  * @host:	DWMMC host structure
  * @max_clk:	Maximum supported clock speed in HZ (e.g. 150000000)
  * @min_clk:	Minimum supported clock speed in HZ (e.g. 400000)
  * @return 0 if OK, -ve on error
  */
 int add_dwmci(struct dwmci_host *host, u32 max_clk, u32 min_clk);
 #endif /* !CONFIG_BLK */

 #ifdef CONFIG_DM_MMC
 /* Export the operations to drivers */
 int dwmci_probe(struct udevice *dev);
 extern const struct dm_mmc_ops dm_dwmci_ops;
 #endif

 #endif	/* __DWMMC_HW_H */
	/* SPDX-License-Identifier: GPL-2.0+ */
	/*
	* (C) Copyright 2012 SAMSUNG Electronics
	* Jaehoon Chung <jh80.chung@samsung.com>
	*/

	#ifndef __DWMMC_HW_H
	#define __DWMMC_HW_H

	#include <asm/io.h>
	#include <mmc.h>

	#define DWMCI_CTRL 0x000
	#define DWMCI_PWREN 0x004
	#define DWMCI_CLKDIV 0x008
	#define DWMCI_CLKSRC 0x00C
	#define DWMCI_CLKENA 0x010
	#define DWMCI_TMOUT 0x014
	#define DWMCI_CTYPE 0x018
	#define DWMCI_BLKSIZ 0x01C
	#define DWMCI_BYTCNT 0x020
	#define DWMCI_INTMASK 0x024
	#define DWMCI_CMDARG 0x028
	#define DWMCI_CMD 0x02C
	#define DWMCI_RESP0 0x030
	#define DWMCI_RESP1 0x034
	#define DWMCI_RESP2 0x038
	#define DWMCI_RESP3 0x03C
	#define DWMCI_MINTSTS 0x040
	#define DWMCI_RINTSTS 0x044
	#define DWMCI_STATUS 0x048
	#define DWMCI_FIFOTH 0x04C
	#define DWMCI_CDETECT 0x050
	#define DWMCI_WRTPRT 0x054
	#define DWMCI_GPIO 0x058
	#define DWMCI_TCMCNT 0x05C
	#define DWMCI_TBBCNT 0x060
	#define DWMCI_DEBNCE 0x064
	#define DWMCI_USRID 0x068
	#define DWMCI_VERID 0x06C
	#define DWMCI_HCON 0x070
	#define DWMCI_UHS_REG 0x074
	#define DWMCI_BMOD 0x080
	#define DWMCI_PLDMND 0x084
	#define DWMCI_DBADDR 0x088
	#define DWMCI_IDSTS 0x08C
	#define DWMCI_IDINTEN 0x090
	#define DWMCI_DSCADDR 0x094
	#define DWMCI_BUFADDR 0x098
	#define DWMCI_DATA 0x200

	/* Interrupt Mask register */
	#define DWMCI_INTMSK_ALL 0xffffffff
	#define DWMCI_INTMSK_RE (1 << 1)
	#define DWMCI_INTMSK_CDONE (1 << 2)
	#define DWMCI_INTMSK_DTO (1 << 3)
	#define DWMCI_INTMSK_TXDR (1 << 4)
	#define DWMCI_INTMSK_RXDR (1 << 5)
	#define DWMCI_INTMSK_RCRC (1 << 6)
	#define DWMCI_INTMSK_DCRC (1 << 7)
	#define DWMCI_INTMSK_RTO (1 << 8)
	#define DWMCI_INTMSK_DRTO (1 << 9)
	#define DWMCI_INTMSK_HTO (1 << 10)
	#define DWMCI_INTMSK_FRUN (1 << 11)
	#define DWMCI_INTMSK_HLE (1 << 12)
	#define DWMCI_INTMSK_SBE (1 << 13)
	#define DWMCI_INTMSK_ACD (1 << 14)
	#define DWMCI_INTMSK_EBE (1 << 15)

	/* Raw interrupt Regsiter */
	#define DWMCI_DATA_ERR (DWMCI_INTMSK_EBE \| DWMCI_INTMSK_SBE \| DWMCI_INTMSK_HLE \|\
	DWMCI_INTMSK_FRUN \| DWMCI_INTMSK_EBE \| DWMCI_INTMSK_DCRC)
	#define DWMCI_DATA_TOUT (DWMCI_INTMSK_HTO \| DWMCI_INTMSK_DRTO)
	/* CTRL register */
	#define DWMCI_CTRL_RESET (1 << 0)
	#define DWMCI_CTRL_FIFO_RESET (1 << 1)
	#define DWMCI_CTRL_DMA_RESET (1 << 2)
	#define DWMCI_DMA_EN (1 << 5)
	#define DWMCI_CTRL_SEND_AS_CCSD (1 << 10)
	#define DWMCI_IDMAC_EN (1 << 25)
	#define DWMCI_RESET_ALL (DWMCI_CTRL_RESET \| DWMCI_CTRL_FIFO_RESET \|\
	DWMCI_CTRL_DMA_RESET)

	/* CMD register */
	#define DWMCI_CMD_RESP_EXP (1 << 6)
	#define DWMCI_CMD_RESP_LENGTH (1 << 7)
	#define DWMCI_CMD_CHECK_CRC (1 << 8)
	#define DWMCI_CMD_DATA_EXP (1 << 9)
	#define DWMCI_CMD_RW (1 << 10)
	#define DWMCI_CMD_SEND_STOP (1 << 12)
	#define DWMCI_CMD_ABORT_STOP (1 << 14)
	#define DWMCI_CMD_PRV_DAT_WAIT (1 << 13)
	#define DWMCI_CMD_UPD_CLK (1 << 21)
	#define DWMCI_CMD_USE_HOLD_REG (1 << 29)
	#define DWMCI_CMD_START (1 << 31)

	/* CLKENA register */
	#define DWMCI_CLKEN_ENABLE (1 << 0)
	#define DWMCI_CLKEN_LOW_PWR (1 << 16)

	/* Card-type registe */
	#define DWMCI_CTYPE_1BIT 0
	#define DWMCI_CTYPE_4BIT (1 << 0)
	#define DWMCI_CTYPE_8BIT (1 << 16)

	/* Status Register */
	#define DWMCI_FIFO_EMPTY (1 << 2)
	#define DWMCI_FIFO_FULL (1 << 3)
	#define DWMCI_BUSY (1 << 9)
	#define DWMCI_FIFO_MASK 0x1fff
	#define DWMCI_FIFO_SHIFT 17

	/* FIFOTH Register */
	#define MSIZE(x) ((x) << 28)
	#define RX_WMARK(x) ((x) << 16)
	#define TX_WMARK(x) (x)
	#define RX_WMARK_SHIFT 16
	#define RX_WMARK_MASK (0xfff << RX_WMARK_SHIFT)

	#define DWMCI_IDMAC_OWN (1 << 31)
	#define DWMCI_IDMAC_CH (1 << 4)
	#define DWMCI_IDMAC_FS (1 << 3)
	#define DWMCI_IDMAC_LD (1 << 2)

	/* Bus Mode Register */
	#define DWMCI_BMOD_IDMAC_RESET (1 << 0)
	#define DWMCI_BMOD_IDMAC_FB (1 << 1)
	#define DWMCI_BMOD_IDMAC_EN (1 << 7)

	/* UHS register */
	#define DWMCI_DDR_MODE (1 << 16)

	/* Internal IDMAC interrupt defines */
	#define DWMCI_IDINTEN_RI BIT(1)
	#define DWMCI_IDINTEN_TI BIT(0)

	#define DWMCI_IDINTEN_MASK (DWMCI_IDINTEN_TI \| \
	DWMCI_IDINTEN_RI)

	/* quirks */
	#define DWMCI_QUIRK_DISABLE_SMU (1 << 0)

	/**
	* struct dwmci_host - Information about a designware MMC host
	*
	* @name: Device name
	* @ioaddr: Base I/O address of controller
	* @quirks: Quick flags - see DWMCI_QUIRK_...
	* @caps: Capabilities - see MMC_MODE_...
	* @bus_hz: Bus speed in Hz, if @get_mmc_clk() is NULL
	* @div: Arbitrary clock divider value for use by controller
	* @dev_index: Arbitrary device index for use by controller
	* @dev_id: Arbitrary device ID for use by controller
	* @buswidth: Bus width in bits (8 or 4)
	* @fifoth_val: Value for FIFOTH register (or 0 to leave unset)
	* @mmc: Pointer to generic MMC structure for this device
	* @priv: Private pointer for use by controller
	*/
	struct dwmci_host {
	const char *name;
	void *ioaddr;
	unsigned int quirks;
	unsigned int caps;
	unsigned int version;
	unsigned int clock;
	unsigned int bus_hz;
	unsigned int div;
	int dev_index;
	int dev_id;
	int buswidth;
	u32 fifoth_val;
	struct mmc *mmc;
	void *priv;

	void (clksel)(struct dwmci_host host);
	void (board_init)(struct dwmci_host host);

	/**
	* Get / set a particular MMC clock frequency
	*
	* This is used to request the current clock frequency of the clock
	* that drives the DWMMC peripheral. The caller will then use this
	* information to work out the divider it needs to achieve the
	* required MMC bus clock frequency. If you want to handle the
	* clock external to DWMMC, use @freq to select the frequency and
	* return that value too. Then DWMMC will put itself in bypass mode.
	*
	* @host: DWMMC host
	* @freq: Frequency the host is trying to achieve
	*/
	unsigned int (get_mmc_clk)(struct dwmci_host host, uint freq);
	#ifndef CONFIG_BLK
	struct mmc_config cfg;
	#endif

	/* use fifo mode to read and write data */
	bool fifo_mode;
	};

	struct dwmci_idmac {
	u32 flags;
	u32 cnt;
	u32 addr;
	u32 next_addr;
	} __aligned(ARCH_DMA_MINALIGN);

	static inline void dwmci_writel(struct dwmci_host *host, int reg, u32 val)
	{
	writel(val, host->ioaddr + reg);
	}

	static inline void dwmci_writew(struct dwmci_host *host, int reg, u16 val)
	{
	writew(val, host->ioaddr + reg);
	}

	static inline void dwmci_writeb(struct dwmci_host *host, int reg, u8 val)
	{
	writeb(val, host->ioaddr + reg);
	}
	static inline u32 dwmci_readl(struct dwmci_host *host, int reg)
	{
	return readl(host->ioaddr + reg);
	}

	static inline u16 dwmci_readw(struct dwmci_host *host, int reg)
	{
	return readw(host->ioaddr + reg);
	}

	static inline u8 dwmci_readb(struct dwmci_host *host, int reg)
	{
	return readb(host->ioaddr + reg);
	}

	#ifdef CONFIG_BLK
	/**
	* dwmci_setup_cfg() - Set up the configuration for DWMMC
	*
	* This is used to set up a DWMMC device when you are using CONFIG_BLK.
	*
	* This should be called from your MMC driver's probe() method once you have
	* the information required.
	*
	* Generally your driver will have a platform data structure which holds both
	* the configuration (struct mmc_config) and the MMC device info (struct mmc).
	* For example:
	*
	* struct rockchip_mmc_plat {
	* struct mmc_config cfg;
	* struct mmc mmc;
	* };
	*
	* ...
	*
	* Inside U_BOOT_DRIVER():
	* .platdata_auto_alloc_size = sizeof(struct rockchip_mmc_plat),
	*
	* To access platform data:
	* struct rockchip_mmc_plat *plat = dev_get_platdata(dev);
	*
	* See rockchip_dw_mmc.c for an example.
	*
	* @cfg: Configuration structure to fill in (generally &plat->mmc)
	* @host: DWMMC host
	* @max_clk: Maximum supported clock speed in HZ (e.g. 150000000)
	* @min_clk: Minimum supported clock speed in HZ (e.g. 400000)
	*/
	void dwmci_setup_cfg(struct mmc_config cfg, struct dwmci_host host,
	u32 max_clk, u32 min_clk);

	/**
	* dwmci_bind() - Set up a new MMC block device
	*
	* This is used to set up a DWMMC block device when you are using CONFIG_BLK.
	* It should be called from your driver's bind() method.
	*
	* See rockchip_dw_mmc.c for an example.
	*
	* @dev: Device to set up
	* @mmc: Pointer to mmc structure (normally &plat->mmc)
	* @cfg: Empty configuration structure (generally &plat->cfg). This is
	* normally all zeroes at this point. The only purpose of passing
	* this in is to set mmc->cfg to it.
	* @return 0 if OK, -ve if the block device could not be created
	*/
	int dwmci_bind(struct udevice dev, struct mmc mmc, struct mmc_config *cfg);

	#else
	/**
	* add_dwmci() - Add a new DWMMC interface
	*
	* This is used when you are not using CONFIG_BLK. Convert your driver over!
	*
	* @host: DWMMC host structure
	* @max_clk: Maximum supported clock speed in HZ (e.g. 150000000)
	* @min_clk: Minimum supported clock speed in HZ (e.g. 400000)
	* @return 0 if OK, -ve on error
	*/
	int add_dwmci(struct dwmci_host *host, u32 max_clk, u32 min_clk);
	#endif /* !CONFIG_BLK */

	#ifdef CONFIG_DM_MMC
	/* Export the operations to drivers */
	int dwmci_probe(struct udevice *dev);
	extern const struct dm_mmc_ops dm_dwmci_ops;
	#endif

	#endif /* __DWMMC_HW_H */