| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2016 Google, Inc |
| * |
| * From coreboot src/soc/intel/broadwell/romstage/raminit.c |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <pci.h> |
| #include <syscon.h> |
| #include <asm/cpu.h> |
| #include <asm/io.h> |
| #include <asm/lpc_common.h> |
| #include <asm/mrccache.h> |
| #include <asm/mrc_common.h> |
| #include <asm/mtrr.h> |
| #include <asm/pci.h> |
| #include <asm/arch/iomap.h> |
| #include <asm/arch/me.h> |
| #include <asm/arch/pch.h> |
| #include <asm/arch/pei_data.h> |
| #include <asm/arch/pm.h> |
| |
| ulong board_get_usable_ram_top(ulong total_size) |
| { |
| return mrc_common_board_get_usable_ram_top(total_size); |
| } |
| |
| int dram_init_banksize(void) |
| { |
| mrc_common_dram_init_banksize(); |
| |
| return 0; |
| } |
| |
| static unsigned long get_top_of_ram(struct udevice *dev) |
| { |
| /* |
| * Base of DPR is top of usable DRAM below 4GiB. The register has |
| * 1 MiB alignment and reports the TOP of the range, the base |
| * must be calculated from the size in MiB in bits 11:4. |
| */ |
| u32 dpr, tom; |
| |
| dm_pci_read_config32(dev, DPR, &dpr); |
| tom = dpr & ~((1 << 20) - 1); |
| |
| debug("dpt %08x tom %08x\n", dpr, tom); |
| /* Subtract DMA Protected Range size if enabled */ |
| if (dpr & DPR_EPM) |
| tom -= (dpr & DPR_SIZE_MASK) << 16; |
| |
| return (unsigned long)tom; |
| } |
| |
| /** |
| * sdram_find() - Find available memory |
| * |
| * This is a bit complicated since on x86 there are system memory holes all |
| * over the place. We create a list of available memory blocks |
| * |
| * @dev: Northbridge device |
| */ |
| static int sdram_find(struct udevice *dev) |
| { |
| struct memory_info *info = &gd->arch.meminfo; |
| ulong top_of_ram; |
| |
| top_of_ram = get_top_of_ram(dev); |
| mrc_add_memory_area(info, 0, top_of_ram); |
| |
| /* Add MTRRs for memory */ |
| mtrr_add_request(MTRR_TYPE_WRBACK, 0, 2ULL << 30); |
| |
| return 0; |
| } |
| |
| static int prepare_mrc_cache(struct pei_data *pei_data) |
| { |
| struct mrc_data_container *mrc_cache; |
| struct mrc_region entry; |
| int ret; |
| |
| ret = mrccache_get_region(NULL, &entry); |
| if (ret) |
| return ret; |
| mrc_cache = mrccache_find_current(&entry); |
| if (!mrc_cache) |
| return -ENOENT; |
| |
| pei_data->saved_data = mrc_cache->data; |
| pei_data->saved_data_size = mrc_cache->data_size; |
| debug("%s: at %p, size %x checksum %04x\n", __func__, |
| pei_data->saved_data, pei_data->saved_data_size, |
| mrc_cache->checksum); |
| |
| return 0; |
| } |
| |
| int dram_init(void) |
| { |
| struct pei_data _pei_data __aligned(8); |
| struct pei_data *pei_data = &_pei_data; |
| struct udevice *dev, *me_dev, *pch_dev; |
| struct chipset_power_state ps; |
| const void *spd_data; |
| int ret, size; |
| |
| memset(pei_data, '\0', sizeof(struct pei_data)); |
| |
| /* Print ME state before MRC */ |
| ret = syscon_get_by_driver_data(X86_SYSCON_ME, &me_dev); |
| if (ret) { |
| debug("Cannot get ME (err=%d)\n", ret); |
| return ret; |
| } |
| intel_me_status(me_dev); |
| |
| /* Save ME HSIO version */ |
| ret = uclass_first_device_err(UCLASS_PCH, &pch_dev); |
| if (ret) { |
| debug("Cannot get PCH (err=%d)\n", ret); |
| return ret; |
| } |
| power_state_get(pch_dev, &ps); |
| |
| intel_me_hsio_version(me_dev, &ps.hsio_version, &ps.hsio_checksum); |
| |
| broadwell_fill_pei_data(pei_data); |
| mainboard_fill_pei_data(pei_data); |
| |
| ret = uclass_first_device_err(UCLASS_NORTHBRIDGE, &dev); |
| if (ret) { |
| debug("Cannot get Northbridge (err=%d)\n", ret); |
| return ret; |
| } |
| size = 256; |
| ret = mrc_locate_spd(dev, size, &spd_data); |
| if (ret) { |
| debug("Cannot locate SPD (err=%d)\n", ret); |
| return ret; |
| } |
| memcpy(pei_data->spd_data[0][0], spd_data, size); |
| memcpy(pei_data->spd_data[1][0], spd_data, size); |
| |
| ret = prepare_mrc_cache(pei_data); |
| if (ret) |
| debug("prepare_mrc_cache failed: %d\n", ret); |
| |
| debug("PEI version %#x\n", pei_data->pei_version); |
| ret = mrc_common_init(dev, pei_data, true); |
| if (ret) { |
| debug("mrc_common_init() failed(err=%d)\n", ret); |
| return ret; |
| } |
| debug("Memory init done\n"); |
| |
| ret = sdram_find(dev); |
| if (ret) { |
| debug("sdram_find() failed (err=%d)\n", ret); |
| return ret; |
| } |
| gd->ram_size = gd->arch.meminfo.total_32bit_memory; |
| debug("RAM size %llx\n", (unsigned long long)gd->ram_size); |
| |
| debug("MRC output data length %#x at %p\n", pei_data->data_to_save_size, |
| pei_data->data_to_save); |
| /* S3 resume: don't save scrambler seed or MRC data */ |
| if (pei_data->boot_mode != SLEEP_STATE_S3) { |
| /* |
| * This will be copied to SDRAM in reserve_arch(), then written |
| * to SPI flash in mrccache_save() |
| */ |
| gd->arch.mrc_output = (char *)pei_data->data_to_save; |
| gd->arch.mrc_output_len = pei_data->data_to_save_size; |
| } |
| gd->arch.pei_meminfo = pei_data->meminfo; |
| |
| return 0; |
| } |
| |
| /* Use this hook to save our SDRAM parameters */ |
| int misc_init_r(void) |
| { |
| int ret; |
| |
| ret = mrccache_save(); |
| if (ret) |
| printf("Unable to save MRC data: %d\n", ret); |
| else |
| debug("Saved MRC cache data\n"); |
| |
| return 0; |
| } |
| |
| static const struct udevice_id broadwell_syscon_ids[] = { |
| { .compatible = "intel,me", .data = X86_SYSCON_ME }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(syscon_intel_me) = { |
| .name = "intel_me_syscon", |
| .id = UCLASS_SYSCON, |
| .of_match = broadwell_syscon_ids, |
| }; |