| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2015 Samsung Electronics |
| * Przemyslaw Marczak <p.marczak@samsung.com> |
| */ |
| |
| #include <common.h> |
| #include <errno.h> |
| #include <dm.h> |
| #include <i2c.h> |
| #include <power/pmic.h> |
| #include <power/sandbox_pmic.h> |
| |
| /** |
| * struct sandbox_i2c_pmic_plat_data - platform data for the PMIC |
| * |
| * @rw_reg: PMICs register of the chip I/O transaction |
| * @reg: PMICs registers array |
| */ |
| struct sandbox_i2c_pmic_plat_data { |
| u8 rw_reg, rw_idx; |
| u8 reg_count; |
| u8 trans_len; |
| u8 buf_size; |
| u8 *reg; |
| }; |
| |
| static int sandbox_i2c_pmic_read_data(struct udevice *emul, uchar chip, |
| uchar *buffer, int len) |
| { |
| struct sandbox_i2c_pmic_plat_data *plat = dev_get_platdata(emul); |
| |
| if (plat->rw_idx + len > plat->buf_size) { |
| pr_err("Request exceeds PMIC register range! Max register: %#x", |
| plat->reg_count); |
| return -EFAULT; |
| } |
| |
| debug("Read PMIC: %#x at register: %#x idx: %#x count: %d\n", |
| (unsigned int)chip & 0xff, plat->rw_reg, plat->rw_idx, len); |
| |
| memcpy(buffer, plat->reg + plat->rw_idx, len); |
| |
| return 0; |
| } |
| |
| static int sandbox_i2c_pmic_write_data(struct udevice *emul, uchar chip, |
| uchar *buffer, int len, |
| bool next_is_read) |
| { |
| struct sandbox_i2c_pmic_plat_data *plat = dev_get_platdata(emul); |
| |
| /* Probe only */ |
| if (!len) |
| return 0; |
| |
| /* Set PMIC register for I/O */ |
| plat->rw_reg = *buffer; |
| plat->rw_idx = plat->rw_reg * plat->trans_len; |
| |
| debug("Write PMIC: %#x at register: %#x idx: %#x count: %d\n", |
| (unsigned int)chip & 0xff, plat->rw_reg, plat->rw_idx, len); |
| |
| /* For read operation, set (write) only chip reg */ |
| if (next_is_read) |
| return 0; |
| |
| buffer++; |
| len--; |
| |
| if (plat->rw_idx + len > plat->buf_size) { |
| pr_err("Request exceeds PMIC register range! Max register: %#x", |
| plat->reg_count); |
| } |
| |
| memcpy(plat->reg + plat->rw_idx, buffer, len); |
| |
| return 0; |
| } |
| |
| static int sandbox_i2c_pmic_xfer(struct udevice *emul, struct i2c_msg *msg, |
| int nmsgs) |
| { |
| int ret = 0; |
| |
| for (; nmsgs > 0; nmsgs--, msg++) { |
| bool next_is_read = nmsgs > 1 && (msg[1].flags & I2C_M_RD); |
| if (msg->flags & I2C_M_RD) { |
| ret = sandbox_i2c_pmic_read_data(emul, msg->addr, |
| msg->buf, msg->len); |
| } else { |
| ret = sandbox_i2c_pmic_write_data(emul, msg->addr, |
| msg->buf, msg->len, |
| next_is_read); |
| } |
| |
| if (ret) |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int sandbox_i2c_pmic_ofdata_to_platdata(struct udevice *emul) |
| { |
| struct sandbox_i2c_pmic_plat_data *plat = dev_get_platdata(emul); |
| struct udevice *pmic_dev = i2c_emul_get_device(emul); |
| struct uc_pmic_priv *priv = dev_get_uclass_priv(pmic_dev); |
| const u8 *reg_defaults; |
| |
| debug("%s:%d Setting PMIC default registers\n", __func__, __LINE__); |
| plat->reg_count = pmic_reg_count(pmic_dev); |
| plat->trans_len = priv->trans_len; |
| plat->buf_size = plat->reg_count * plat->trans_len; |
| |
| plat->reg = calloc(1, plat->buf_size); |
| if (!plat->reg) { |
| debug("Canot allocate memory (%d B) for PMIC I2C emulation!\n", |
| plat->buf_size); |
| return -ENOMEM; |
| } |
| |
| reg_defaults = dev_read_u8_array_ptr(emul, "reg-defaults", |
| plat->buf_size); |
| |
| if (!reg_defaults) { |
| pr_err("Property \"reg-defaults\" not found for device: %s!", |
| emul->name); |
| free(plat->reg); |
| return -EINVAL; |
| } |
| |
| memcpy(plat->reg, reg_defaults, plat->buf_size); |
| |
| return 0; |
| } |
| |
| struct dm_i2c_ops sandbox_i2c_pmic_emul_ops = { |
| .xfer = sandbox_i2c_pmic_xfer, |
| }; |
| |
| static const struct udevice_id sandbox_i2c_pmic_ids[] = { |
| { .compatible = "sandbox,i2c-pmic" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(sandbox_i2c_pmic_emul) = { |
| .name = "sandbox_i2c_pmic_emul", |
| .id = UCLASS_I2C_EMUL, |
| .of_match = sandbox_i2c_pmic_ids, |
| .ofdata_to_platdata = sandbox_i2c_pmic_ofdata_to_platdata, |
| .platdata_auto_alloc_size = sizeof(struct sandbox_i2c_pmic_plat_data), |
| .ops = &sandbox_i2c_pmic_emul_ops, |
| }; |