| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2017-2018 NXP |
| */ |
| |
| #include <common.h> |
| #include <i2c.h> |
| #include <asm/io.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/fsl_serdes.h> |
| #ifdef CONFIG_FSL_LS_PPA |
| #include <asm/arch/ppa.h> |
| #endif |
| #include <asm/arch/mmu.h> |
| #include <asm/arch/soc.h> |
| #include <fsl_esdhc.h> |
| #include <hwconfig.h> |
| #include <env_internal.h> |
| #include <fsl_mmdc.h> |
| #include <netdev.h> |
| #include <fsl_sec.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| static inline int get_board_version(void) |
| { |
| uint32_t val; |
| #ifdef CONFIG_TARGET_LS1012AFRDM |
| val = 0; |
| #else |
| struct ccsr_gpio *pgpio = (void *)(GPIO2_BASE_ADDR); |
| |
| val = in_be32(&pgpio->gpdat) & BOARD_REV_MASK;/*Get GPIO2 11,12,14*/ |
| |
| #endif |
| return val; |
| } |
| |
| int checkboard(void) |
| { |
| #ifdef CONFIG_TARGET_LS1012AFRDM |
| puts("Board: LS1012AFRDM "); |
| #else |
| int rev; |
| |
| rev = get_board_version(); |
| |
| puts("Board: FRWY-LS1012A "); |
| |
| puts("Version"); |
| |
| switch (rev) { |
| case BOARD_REV_A_B: |
| puts(": RevA/B "); |
| break; |
| case BOARD_REV_C: |
| puts(": RevC "); |
| break; |
| default: |
| puts(": unknown"); |
| break; |
| } |
| #endif |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_TARGET_LS1012AFRWY |
| int esdhc_status_fixup(void *blob, const char *compat) |
| { |
| char esdhc0_path[] = "/soc/esdhc@1560000"; |
| char esdhc1_path[] = "/soc/esdhc@1580000"; |
| |
| do_fixup_by_path(blob, esdhc0_path, "status", "okay", |
| sizeof("okay"), 1); |
| |
| do_fixup_by_path(blob, esdhc1_path, "status", "disabled", |
| sizeof("disabled"), 1); |
| return 0; |
| } |
| #endif |
| |
| #ifdef CONFIG_TFABOOT |
| int dram_init(void) |
| { |
| #ifdef CONFIG_TARGET_LS1012AFRWY |
| int board_rev; |
| #endif |
| |
| gd->ram_size = tfa_get_dram_size(); |
| |
| if (!gd->ram_size) { |
| #ifdef CONFIG_TARGET_LS1012AFRWY |
| board_rev = get_board_version(); |
| |
| if (board_rev & BOARD_REV_C) |
| gd->ram_size = SYS_SDRAM_SIZE_1024; |
| else |
| gd->ram_size = SYS_SDRAM_SIZE_512; |
| #else |
| gd->ram_size = CONFIG_SYS_SDRAM_SIZE; |
| #endif |
| } |
| return 0; |
| } |
| #else |
| int dram_init(void) |
| { |
| #ifdef CONFIG_TARGET_LS1012AFRWY |
| int board_rev; |
| #endif |
| struct fsl_mmdc_info mparam = { |
| 0x04180000, /* mdctl */ |
| 0x00030035, /* mdpdc */ |
| 0x12554000, /* mdotc */ |
| 0xbabf7954, /* mdcfg0 */ |
| 0xdb328f64, /* mdcfg1 */ |
| 0x01ff00db, /* mdcfg2 */ |
| 0x00001680, /* mdmisc */ |
| 0x0f3c8000, /* mdref */ |
| 0x00002000, /* mdrwd */ |
| 0x00bf1023, /* mdor */ |
| 0x0000003f, /* mdasp */ |
| 0x0000022a, /* mpodtctrl */ |
| 0xa1390003, /* mpzqhwctrl */ |
| }; |
| |
| #ifdef CONFIG_TARGET_LS1012AFRWY |
| board_rev = get_board_version(); |
| |
| if (board_rev == BOARD_REV_C) { |
| mparam.mdctl = 0x05180000; |
| gd->ram_size = SYS_SDRAM_SIZE_1024; |
| } else { |
| gd->ram_size = SYS_SDRAM_SIZE_512; |
| } |
| #else |
| gd->ram_size = CONFIG_SYS_SDRAM_SIZE; |
| #endif |
| mmdc_init(&mparam); |
| |
| #if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) |
| /* This will break-before-make MMU for DDR */ |
| update_early_mmu_table(); |
| #endif |
| |
| return 0; |
| } |
| #endif |
| |
| int board_early_init_f(void) |
| { |
| fsl_lsch2_early_init_f(); |
| |
| return 0; |
| } |
| |
| int board_init(void) |
| { |
| struct ccsr_cci400 *cci = (struct ccsr_cci400 *)(CONFIG_SYS_IMMR + |
| CONFIG_SYS_CCI400_OFFSET); |
| |
| /* |
| * Set CCI-400 control override register to enable barrier |
| * transaction |
| */ |
| if (current_el() == 3) |
| out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER); |
| |
| #ifdef CONFIG_ENV_IS_NOWHERE |
| gd->env_addr = (ulong)&default_environment[0]; |
| #endif |
| |
| #ifdef CONFIG_FSL_CAAM |
| sec_init(); |
| #endif |
| |
| #ifdef CONFIG_FSL_LS_PPA |
| ppa_init(); |
| #endif |
| return 0; |
| } |
| |
| int ft_board_setup(void *blob, bd_t *bd) |
| { |
| arch_fixup_fdt(blob); |
| |
| ft_cpu_setup(blob, bd); |
| |
| return 0; |
| } |