| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2015 Toradex, Inc. |
| * |
| * Based on vf610twr: |
| * Copyright 2013 Freescale Semiconductor, Inc. |
| */ |
| |
| #include <asm/io.h> |
| #include <asm/arch/imx-regs.h> |
| #include <asm/arch/iomux-vf610.h> |
| #include <asm/arch/ddrmc-vf610.h> |
| #include "ddrmc-vf610-calibration.h" |
| |
| void ddrmc_setup_iomux(const iomux_v3_cfg_t *pads, int pads_count) |
| { |
| static const iomux_v3_cfg_t default_pads[] = { |
| VF610_PAD_DDR_A15__DDR_A_15, |
| VF610_PAD_DDR_A14__DDR_A_14, |
| VF610_PAD_DDR_A13__DDR_A_13, |
| VF610_PAD_DDR_A12__DDR_A_12, |
| VF610_PAD_DDR_A11__DDR_A_11, |
| VF610_PAD_DDR_A10__DDR_A_10, |
| VF610_PAD_DDR_A9__DDR_A_9, |
| VF610_PAD_DDR_A8__DDR_A_8, |
| VF610_PAD_DDR_A7__DDR_A_7, |
| VF610_PAD_DDR_A6__DDR_A_6, |
| VF610_PAD_DDR_A5__DDR_A_5, |
| VF610_PAD_DDR_A4__DDR_A_4, |
| VF610_PAD_DDR_A3__DDR_A_3, |
| VF610_PAD_DDR_A2__DDR_A_2, |
| VF610_PAD_DDR_A1__DDR_A_1, |
| VF610_PAD_DDR_A0__DDR_A_0, |
| VF610_PAD_DDR_BA2__DDR_BA_2, |
| VF610_PAD_DDR_BA1__DDR_BA_1, |
| VF610_PAD_DDR_BA0__DDR_BA_0, |
| VF610_PAD_DDR_CAS__DDR_CAS_B, |
| VF610_PAD_DDR_CKE__DDR_CKE_0, |
| VF610_PAD_DDR_CLK__DDR_CLK_0, |
| VF610_PAD_DDR_CS__DDR_CS_B_0, |
| VF610_PAD_DDR_D15__DDR_D_15, |
| VF610_PAD_DDR_D14__DDR_D_14, |
| VF610_PAD_DDR_D13__DDR_D_13, |
| VF610_PAD_DDR_D12__DDR_D_12, |
| VF610_PAD_DDR_D11__DDR_D_11, |
| VF610_PAD_DDR_D10__DDR_D_10, |
| VF610_PAD_DDR_D9__DDR_D_9, |
| VF610_PAD_DDR_D8__DDR_D_8, |
| VF610_PAD_DDR_D7__DDR_D_7, |
| VF610_PAD_DDR_D6__DDR_D_6, |
| VF610_PAD_DDR_D5__DDR_D_5, |
| VF610_PAD_DDR_D4__DDR_D_4, |
| VF610_PAD_DDR_D3__DDR_D_3, |
| VF610_PAD_DDR_D2__DDR_D_2, |
| VF610_PAD_DDR_D1__DDR_D_1, |
| VF610_PAD_DDR_D0__DDR_D_0, |
| VF610_PAD_DDR_DQM1__DDR_DQM_1, |
| VF610_PAD_DDR_DQM0__DDR_DQM_0, |
| VF610_PAD_DDR_DQS1__DDR_DQS_1, |
| VF610_PAD_DDR_DQS0__DDR_DQS_0, |
| VF610_PAD_DDR_RAS__DDR_RAS_B, |
| VF610_PAD_DDR_WE__DDR_WE_B, |
| VF610_PAD_DDR_ODT1__DDR_ODT_0, |
| VF610_PAD_DDR_ODT0__DDR_ODT_1, |
| VF610_PAD_DDR_DDRBYTE1__DDR_DDRBYTE1, |
| VF610_PAD_DDR_DDRBYTE2__DDR_DDRBYTE2, |
| VF610_PAD_DDR_RESETB, |
| }; |
| |
| if ((pads == NULL) || (pads_count == 0)) { |
| pads = default_pads; |
| pads_count = ARRAY_SIZE(default_pads); |
| } |
| |
| imx_iomux_v3_setup_multiple_pads(pads, pads_count); |
| } |
| |
| static struct ddrmc_phy_setting default_phy_settings[] = { |
| { DDRMC_PHY_DQ_TIMING, 0 }, |
| { DDRMC_PHY_DQ_TIMING, 16 }, |
| { DDRMC_PHY_DQ_TIMING, 32 }, |
| |
| { DDRMC_PHY_DQS_TIMING, 1 }, |
| { DDRMC_PHY_DQS_TIMING, 17 }, |
| |
| { DDRMC_PHY_CTRL, 2 }, |
| { DDRMC_PHY_CTRL, 18 }, |
| { DDRMC_PHY_CTRL, 34 }, |
| |
| { DDRMC_PHY_MASTER_CTRL, 3 }, |
| { DDRMC_PHY_MASTER_CTRL, 19 }, |
| { DDRMC_PHY_MASTER_CTRL, 35 }, |
| |
| { DDRMC_PHY_SLAVE_CTRL, 4 }, |
| { DDRMC_PHY_SLAVE_CTRL, 20 }, |
| { DDRMC_PHY_SLAVE_CTRL, 36 }, |
| |
| /* LPDDR2 only parameter */ |
| { DDRMC_PHY_OFF, 49 }, |
| |
| { DDRMC_PHY50_DDR3_MODE | DDRMC_PHY50_EN_SW_HALF_CYCLE, 50 }, |
| |
| /* Processor Pad ODT settings */ |
| { DDRMC_PHY_PROC_PAD_ODT, 52 }, |
| |
| /* end marker */ |
| { 0, -1 } |
| }; |
| |
| void ddrmc_ctrl_init_ddr3(struct ddr3_jedec_timings const *timings, |
| struct ddrmc_cr_setting *board_cr_settings, |
| struct ddrmc_phy_setting *board_phy_settings, |
| int col_diff, int row_diff) |
| { |
| struct ddrmr_regs *ddrmr = (struct ddrmr_regs *)DDR_BASE_ADDR; |
| struct ddrmc_cr_setting *cr_setting; |
| struct ddrmc_phy_setting *phy_setting; |
| |
| writel(DDRMC_CR00_DRAM_CLASS_DDR3, &ddrmr->cr[0]); |
| writel(DDRMC_CR02_DRAM_TINIT(timings->tinit), &ddrmr->cr[2]); |
| writel(DDRMC_CR10_TRST_PWRON(timings->trst_pwron), &ddrmr->cr[10]); |
| |
| writel(DDRMC_CR11_CKE_INACTIVE(timings->cke_inactive), &ddrmr->cr[11]); |
| writel(DDRMC_CR12_WRLAT(timings->wrlat) | |
| DDRMC_CR12_CASLAT_LIN(timings->caslat_lin), &ddrmr->cr[12]); |
| writel(DDRMC_CR13_TRC(timings->trc) | DDRMC_CR13_TRRD(timings->trrd) | |
| DDRMC_CR13_TCCD(timings->tccd) | |
| DDRMC_CR13_TBST_INT_INTERVAL(timings->tbst_int_interval), |
| &ddrmr->cr[13]); |
| writel(DDRMC_CR14_TFAW(timings->tfaw) | DDRMC_CR14_TRP(timings->trp) | |
| DDRMC_CR14_TWTR(timings->twtr) | |
| DDRMC_CR14_TRAS_MIN(timings->tras_min), &ddrmr->cr[14]); |
| writel(DDRMC_CR16_TMRD(timings->tmrd) | |
| DDRMC_CR16_TRTP(timings->trtp), &ddrmr->cr[16]); |
| writel(DDRMC_CR17_TRAS_MAX(timings->tras_max) | |
| DDRMC_CR17_TMOD(timings->tmod), &ddrmr->cr[17]); |
| writel(DDRMC_CR18_TCKESR(timings->tckesr) | |
| DDRMC_CR18_TCKE(timings->tcke), &ddrmr->cr[18]); |
| |
| writel(DDRMC_CR20_AP_EN, &ddrmr->cr[20]); |
| writel(DDRMC_CR21_TRCD_INT(timings->trcd_int) | DDRMC_CR21_CCMAP_EN | |
| DDRMC_CR21_TRAS_LOCKOUT(timings->tras_lockout), |
| &ddrmr->cr[21]); |
| |
| writel(DDRMC_CR22_TDAL(timings->tdal), &ddrmr->cr[22]); |
| writel(DDRMC_CR23_BSTLEN(timings->bstlen) | |
| DDRMC_CR23_TDLL(timings->tdll), &ddrmr->cr[23]); |
| writel(DDRMC_CR24_TRP_AB(timings->trp_ab), &ddrmr->cr[24]); |
| |
| writel(DDRMC_CR25_TREF_EN, &ddrmr->cr[25]); |
| writel(DDRMC_CR26_TREF(timings->tref) | |
| DDRMC_CR26_TRFC(timings->trfc), &ddrmr->cr[26]); |
| writel(DDRMC_CR28_TREF_INT(timings->tref_int), &ddrmr->cr[28]); |
| writel(DDRMC_CR29_TPDEX(timings->tpdex), &ddrmr->cr[29]); |
| |
| writel(DDRMC_CR30_TXPDLL(timings->txpdll), &ddrmr->cr[30]); |
| writel(DDRMC_CR31_TXSNR(timings->txsnr) | |
| DDRMC_CR31_TXSR(timings->txsr), &ddrmr->cr[31]); |
| writel(DDRMC_CR33_EN_QK_SREF, &ddrmr->cr[33]); |
| writel(DDRMC_CR34_CKSRX(timings->cksrx) | |
| DDRMC_CR34_CKSRE(timings->cksre), &ddrmr->cr[34]); |
| |
| writel(DDRMC_CR38_FREQ_CHG_EN(timings->freq_chg_en), &ddrmr->cr[38]); |
| writel(DDRMC_CR39_PHY_INI_COM(1024) | DDRMC_CR39_PHY_INI_STA(16) | |
| DDRMC_CR39_FRQ_CH_DLLOFF(2), &ddrmr->cr[39]); |
| |
| writel(DDRMC_CR41_PHY_INI_STRT_INI_DIS, &ddrmr->cr[41]); |
| writel(DDRMC_CR48_MR1_DA_0(70) | |
| DDRMC_CR48_MR0_DA_0(1056), &ddrmr->cr[48]); |
| |
| writel(DDRMC_CR66_ZQCL(timings->zqcl) | |
| DDRMC_CR66_ZQINIT(timings->zqinit), &ddrmr->cr[66]); |
| writel(DDRMC_CR67_ZQCS(timings->zqcs), &ddrmr->cr[67]); |
| writel(DDRMC_CR69_ZQ_ON_SREF_EX(2), &ddrmr->cr[69]); |
| |
| writel(DDRMC_CR70_REF_PER_ZQ(timings->ref_per_zq), &ddrmr->cr[70]); |
| writel(DDRMC_CR72_ZQCS_ROTATE(timings->zqcs_rotate), &ddrmr->cr[72]); |
| |
| writel(DDRMC_CR73_APREBIT(timings->aprebit) | |
| DDRMC_CR73_COL_DIFF(col_diff) | |
| DDRMC_CR73_ROW_DIFF(row_diff), &ddrmr->cr[73]); |
| writel(DDRMC_CR74_BANKSPLT_EN | DDRMC_CR74_ADDR_CMP_EN | |
| DDRMC_CR74_CMD_AGE_CNT(timings->cmd_age_cnt) | |
| DDRMC_CR74_AGE_CNT(timings->age_cnt), |
| &ddrmr->cr[74]); |
| writel(DDRMC_CR75_RW_PG_EN | DDRMC_CR75_RW_EN | DDRMC_CR75_PRI_EN | |
| DDRMC_CR75_PLEN, &ddrmr->cr[75]); |
| writel(DDRMC_CR76_NQENT_ACTDIS(3) | DDRMC_CR76_D_RW_G_BKCN(3) | |
| DDRMC_CR76_W2R_SPLT_EN, &ddrmr->cr[76]); |
| writel(DDRMC_CR77_CS_MAP | DDRMC_CR77_DI_RD_INTLEAVE | |
| DDRMC_CR77_SWAP_EN, &ddrmr->cr[77]); |
| writel(DDRMC_CR78_Q_FULLNESS(timings->q_fullness) | |
| DDRMC_CR78_BUR_ON_FLY_BIT(12), &ddrmr->cr[78]); |
| |
| writel(DDRMC_CR82_INT_MASK, &ddrmr->cr[82]); |
| |
| writel(DDRMC_CR87_ODT_RD_MAPCS0(timings->odt_rd_mapcs0) | |
| DDRMC_CR87_ODT_WR_MAPCS0(timings->odt_wr_mapcs0), |
| &ddrmr->cr[87]); |
| writel(DDRMC_CR88_TODTL_CMD(4), &ddrmr->cr[88]); |
| writel(DDRMC_CR89_AODT_RWSMCS(2), &ddrmr->cr[89]); |
| |
| writel(DDRMC_CR91_R2W_SMCSDL(2), &ddrmr->cr[91]); |
| writel(DDRMC_CR96_WLMRD(timings->wlmrd) | |
| DDRMC_CR96_WLDQSEN(timings->wldqsen), &ddrmr->cr[96]); |
| |
| /* execute custom CR setting sequence (may be NULL) */ |
| cr_setting = board_cr_settings; |
| if (cr_setting != NULL) |
| while (cr_setting->cr_rnum >= 0) { |
| writel(cr_setting->setting, |
| &ddrmr->cr[cr_setting->cr_rnum]); |
| cr_setting++; |
| } |
| |
| /* perform default PHY settings (may be overridden by custom settings */ |
| phy_setting = default_phy_settings; |
| while (phy_setting->phy_rnum >= 0) { |
| writel(phy_setting->setting, |
| &ddrmr->phy[phy_setting->phy_rnum]); |
| phy_setting++; |
| } |
| |
| /* execute custom PHY setting sequence (may be NULL) */ |
| phy_setting = board_phy_settings; |
| if (phy_setting != NULL) |
| while (phy_setting->phy_rnum >= 0) { |
| writel(phy_setting->setting, |
| &ddrmr->phy[phy_setting->phy_rnum]); |
| phy_setting++; |
| } |
| |
| /* all inits done, start the DDR controller */ |
| writel(DDRMC_CR00_DRAM_CLASS_DDR3 | DDRMC_CR00_START, &ddrmr->cr[0]); |
| |
| while (!(readl(&ddrmr->cr[80]) & DDRMC_CR80_MC_INIT_COMPLETE)) |
| udelay(10); |
| writel(DDRMC_CR80_MC_INIT_COMPLETE, &ddrmr->cr[81]); |
| |
| #ifdef CONFIG_DDRMC_VF610_CALIBRATION |
| ddrmc_calibration(ddrmr); |
| #endif |
| } |