| config ARCH_LS1021A |
| bool |
| select SYS_FSL_DDR_BE if SYS_FSL_DDR |
| select SYS_FSL_DDR_VER_50 if SYS_FSL_DDR |
| select SYS_FSL_ERRATUM_A008378 |
| select SYS_FSL_ERRATUM_A008407 |
| select SYS_FSL_ERRATUM_A008850 |
| select SYS_FSL_ERRATUM_A008997 |
| select SYS_FSL_ERRATUM_A009007 |
| select SYS_FSL_ERRATUM_A009008 |
| select SYS_FSL_ERRATUM_A009663 |
| select SYS_FSL_ERRATUM_A009798 |
| select SYS_FSL_ERRATUM_A009942 |
| select SYS_FSL_ERRATUM_A010315 |
| select SYS_FSL_HAS_CCI400 |
| select SYS_FSL_HAS_DDR3 if SYS_FSL_DDR |
| select SYS_FSL_HAS_DDR4 if SYS_FSL_DDR |
| select SYS_FSL_HAS_SEC |
| select SYS_FSL_SEC_COMPAT_5 |
| select SYS_FSL_SEC_LE |
| select SYS_FSL_SRDS_1 |
| select SYS_HAS_SERDES |
| imply CMD_PCI |
| imply SCSI |
| imply SCSI_AHCI |
| |
| menu "LS102xA architecture" |
| depends on ARCH_LS1021A |
| |
| config FSL_PCIE_COMPAT |
| string "PCIe compatible of Kernel DT" |
| depends on PCIE_LAYERSCAPE |
| default "fsl,ls1021a-pcie" if ARCH_LS1021A |
| help |
| This compatible is used to find pci controller node in Kernel DT |
| to complete fixup. |
| |
| config LS1_DEEP_SLEEP |
| bool "Deep sleep" |
| depends on ARCH_LS1021A |
| |
| config MAX_CPUS |
| int "Maximum number of CPUs permitted for LS102xA" |
| depends on ARCH_LS1021A |
| default 2 |
| help |
| Set this number to the maximum number of possible CPUs in the SoC. |
| SoCs may have multiple clusters with each cluster may have multiple |
| ports. If some ports are reserved but higher ports are used for |
| cores, count the reserved ports. This will allocate enough memory |
| in spin table to properly handle all cores. |
| |
| config SECURE_BOOT |
| bool "Secure Boot" |
| help |
| Enable Freescale Secure Boot feature. Normally selected |
| by defconfig. If unsure, do not change. |
| |
| config SYS_CCI400_OFFSET |
| hex "Offset for CCI400 base" |
| depends on SYS_FSL_HAS_CCI400 |
| default 0x180000 |
| help |
| Offset for CCI400 base. |
| CCI400 base addr = CCSRBAR + CCI400_OFFSET |
| |
| config SYS_FSL_ERRATUM_A008850 |
| bool |
| help |
| Workaround for DDR erratum A008850 |
| |
| config SYS_FSL_ERRATUM_A008997 |
| bool |
| help |
| Workaround for USB PHY erratum A008997 |
| |
| config SYS_FSL_ERRATUM_A009007 |
| bool |
| help |
| Workaround for USB PHY erratum A009007 |
| |
| config SYS_FSL_ERRATUM_A009008 |
| bool |
| help |
| Workaround for USB PHY erratum A009008 |
| |
| config SYS_FSL_ERRATUM_A009798 |
| bool |
| help |
| Workaround for USB PHY erratum A009798 |
| |
| config SYS_FSL_ERRATUM_A010315 |
| bool "Workaround for PCIe erratum A010315" |
| |
| config SYS_FSL_HAS_CCI400 |
| bool |
| |
| config SYS_FSL_SRDS_1 |
| bool |
| |
| config SYS_FSL_SRDS_2 |
| bool |
| |
| config SYS_HAS_SERDES |
| bool |
| |
| config SYS_FSL_IFC_BANK_COUNT |
| int "Maximum banks of Integrated flash controller" |
| depends on ARCH_LS1021A |
| default 8 |
| |
| config SYS_FSL_ERRATUM_A008407 |
| bool |
| |
| endmenu |
