| /* |
| * Copyright (c) 2009, Google Inc. |
| * All rights reserved. |
| * |
| * Copyright (c) 2009-2014, The Linux Foundation. All rights reserved. |
| * Portions Copyright 2014 Broadcom Corporation. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of The Linux Foundation nor |
| * the names of its contributors may be used to endorse or promote |
| * products derived from this software without specific prior written |
| * permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR |
| * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, |
| * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, |
| * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; |
| * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR |
| * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF |
| * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * NOTE: |
| * Although it is very similar, this license text is not identical |
| * to the "BSD-3-Clause", therefore, DO NOT MODIFY THIS LICENSE TEXT! |
| */ |
| |
| #include <config.h> |
| #include <common.h> |
| #include <image-sparse.h> |
| #include <div64.h> |
| #include <malloc.h> |
| #include <part.h> |
| #include <sparse_format.h> |
| |
| #include <linux/math64.h> |
| |
| static void default_log(const char *ignored, char *response) {} |
| |
| int write_sparse_image(struct sparse_storage *info, |
| const char *part_name, void *data, char *response) |
| { |
| lbaint_t blk; |
| lbaint_t blkcnt; |
| lbaint_t blks; |
| uint32_t bytes_written = 0; |
| unsigned int chunk; |
| unsigned int offset; |
| unsigned int chunk_data_sz; |
| uint32_t *fill_buf = NULL; |
| uint32_t fill_val; |
| sparse_header_t *sparse_header; |
| chunk_header_t *chunk_header; |
| uint32_t total_blocks = 0; |
| int fill_buf_num_blks; |
| int i; |
| int j; |
| |
| fill_buf_num_blks = CONFIG_IMAGE_SPARSE_FILLBUF_SIZE / info->blksz; |
| |
| /* Read and skip over sparse image header */ |
| sparse_header = (sparse_header_t *)data; |
| |
| data += sparse_header->file_hdr_sz; |
| if (sparse_header->file_hdr_sz > sizeof(sparse_header_t)) { |
| /* |
| * Skip the remaining bytes in a header that is longer than |
| * we expected. |
| */ |
| data += (sparse_header->file_hdr_sz - sizeof(sparse_header_t)); |
| } |
| |
| if (!info->mssg) |
| info->mssg = default_log; |
| |
| debug("=== Sparse Image Header ===\n"); |
| debug("magic: 0x%x\n", sparse_header->magic); |
| debug("major_version: 0x%x\n", sparse_header->major_version); |
| debug("minor_version: 0x%x\n", sparse_header->minor_version); |
| debug("file_hdr_sz: %d\n", sparse_header->file_hdr_sz); |
| debug("chunk_hdr_sz: %d\n", sparse_header->chunk_hdr_sz); |
| debug("blk_sz: %d\n", sparse_header->blk_sz); |
| debug("total_blks: %d\n", sparse_header->total_blks); |
| debug("total_chunks: %d\n", sparse_header->total_chunks); |
| |
| /* |
| * Verify that the sparse block size is a multiple of our |
| * storage backend block size |
| */ |
| div_u64_rem(sparse_header->blk_sz, info->blksz, &offset); |
| if (offset) { |
| printf("%s: Sparse image block size issue [%u]\n", |
| __func__, sparse_header->blk_sz); |
| info->mssg("sparse image block size issue", response); |
| return -1; |
| } |
| |
| puts("Flashing Sparse Image\n"); |
| |
| /* Start processing chunks */ |
| blk = info->start; |
| for (chunk = 0; chunk < sparse_header->total_chunks; chunk++) { |
| /* Read and skip over chunk header */ |
| chunk_header = (chunk_header_t *)data; |
| data += sizeof(chunk_header_t); |
| |
| if (chunk_header->chunk_type != CHUNK_TYPE_RAW) { |
| debug("=== Chunk Header ===\n"); |
| debug("chunk_type: 0x%x\n", chunk_header->chunk_type); |
| debug("chunk_data_sz: 0x%x\n", chunk_header->chunk_sz); |
| debug("total_size: 0x%x\n", chunk_header->total_sz); |
| } |
| |
| if (sparse_header->chunk_hdr_sz > sizeof(chunk_header_t)) { |
| /* |
| * Skip the remaining bytes in a header that is longer |
| * than we expected. |
| */ |
| data += (sparse_header->chunk_hdr_sz - |
| sizeof(chunk_header_t)); |
| } |
| |
| chunk_data_sz = sparse_header->blk_sz * chunk_header->chunk_sz; |
| blkcnt = chunk_data_sz / info->blksz; |
| switch (chunk_header->chunk_type) { |
| case CHUNK_TYPE_RAW: |
| if (chunk_header->total_sz != |
| (sparse_header->chunk_hdr_sz + chunk_data_sz)) { |
| info->mssg("Bogus chunk size for chunk type Raw", |
| response); |
| return -1; |
| } |
| |
| if (blk + blkcnt > info->start + info->size) { |
| printf( |
| "%s: Request would exceed partition size!\n", |
| __func__); |
| info->mssg("Request would exceed partition size!", |
| response); |
| return -1; |
| } |
| |
| blks = info->write(info, blk, blkcnt, data); |
| /* blks might be > blkcnt (eg. NAND bad-blocks) */ |
| if (blks < blkcnt) { |
| printf("%s: %s" LBAFU " [" LBAFU "]\n", |
| __func__, "Write failed, block #", |
| blk, blks); |
| info->mssg("flash write failure", response); |
| return -1; |
| } |
| blk += blks; |
| bytes_written += blkcnt * info->blksz; |
| total_blocks += chunk_header->chunk_sz; |
| data += chunk_data_sz; |
| break; |
| |
| case CHUNK_TYPE_FILL: |
| if (chunk_header->total_sz != |
| (sparse_header->chunk_hdr_sz + sizeof(uint32_t))) { |
| info->mssg("Bogus chunk size for chunk type FILL", response); |
| return -1; |
| } |
| |
| fill_buf = (uint32_t *) |
| memalign(ARCH_DMA_MINALIGN, |
| ROUNDUP( |
| info->blksz * fill_buf_num_blks, |
| ARCH_DMA_MINALIGN)); |
| if (!fill_buf) { |
| info->mssg("Malloc failed for: CHUNK_TYPE_FILL", |
| response); |
| return -1; |
| } |
| |
| fill_val = *(uint32_t *)data; |
| data = (char *)data + sizeof(uint32_t); |
| |
| for (i = 0; |
| i < (info->blksz * fill_buf_num_blks / |
| sizeof(fill_val)); |
| i++) |
| fill_buf[i] = fill_val; |
| |
| if (blk + blkcnt > info->start + info->size) { |
| printf( |
| "%s: Request would exceed partition size!\n", |
| __func__); |
| info->mssg("Request would exceed partition size!", |
| response); |
| return -1; |
| } |
| |
| for (i = 0; i < blkcnt;) { |
| j = blkcnt - i; |
| if (j > fill_buf_num_blks) |
| j = fill_buf_num_blks; |
| blks = info->write(info, blk, j, fill_buf); |
| /* blks might be > j (eg. NAND bad-blocks) */ |
| if (blks < j) { |
| printf("%s: %s " LBAFU " [%d]\n", |
| __func__, |
| "Write failed, block #", |
| blk, j); |
| info->mssg("flash write failure", |
| response); |
| free(fill_buf); |
| return -1; |
| } |
| blk += blks; |
| i += j; |
| } |
| bytes_written += blkcnt * info->blksz; |
| total_blocks += chunk_data_sz / sparse_header->blk_sz; |
| free(fill_buf); |
| break; |
| |
| case CHUNK_TYPE_DONT_CARE: |
| blk += info->reserve(info, blk, blkcnt); |
| total_blocks += chunk_header->chunk_sz; |
| break; |
| |
| case CHUNK_TYPE_CRC32: |
| if (chunk_header->total_sz != |
| sparse_header->chunk_hdr_sz) { |
| info->mssg("Bogus chunk size for chunk type Dont Care", |
| response); |
| return -1; |
| } |
| total_blocks += chunk_header->chunk_sz; |
| data += chunk_data_sz; |
| break; |
| |
| default: |
| printf("%s: Unknown chunk type: %x\n", __func__, |
| chunk_header->chunk_type); |
| info->mssg("Unknown chunk type", response); |
| return -1; |
| } |
| } |
| |
| debug("Wrote %d blocks, expected to write %d blocks\n", |
| total_blocks, sparse_header->total_blks); |
| printf("........ wrote %u bytes to '%s'\n", bytes_written, part_name); |
| |
| if (total_blocks != sparse_header->total_blks) { |
| info->mssg("sparse image write failure", response); |
| return -1; |
| } |
| |
| return 0; |
| } |