| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Ingenic JZ MMC driver |
| * |
| * Copyright (c) 2013 Imagination Technologies |
| * Author: Paul Burton <paul.burton@imgtec.com> |
| */ |
| |
| #include <common.h> |
| #include <malloc.h> |
| #include <mmc.h> |
| #include <asm/io.h> |
| #include <asm/unaligned.h> |
| #include <errno.h> |
| #include <mach/jz4780.h> |
| #include <wait_bit.h> |
| |
| /* Registers */ |
| #define MSC_STRPCL 0x000 |
| #define MSC_STAT 0x004 |
| #define MSC_CLKRT 0x008 |
| #define MSC_CMDAT 0x00c |
| #define MSC_RESTO 0x010 |
| #define MSC_RDTO 0x014 |
| #define MSC_BLKLEN 0x018 |
| #define MSC_NOB 0x01c |
| #define MSC_SNOB 0x020 |
| #define MSC_IMASK 0x024 |
| #define MSC_IREG 0x028 |
| #define MSC_CMD 0x02c |
| #define MSC_ARG 0x030 |
| #define MSC_RES 0x034 |
| #define MSC_RXFIFO 0x038 |
| #define MSC_TXFIFO 0x03c |
| #define MSC_LPM 0x040 |
| #define MSC_DMAC 0x044 |
| #define MSC_DMANDA 0x048 |
| #define MSC_DMADA 0x04c |
| #define MSC_DMALEN 0x050 |
| #define MSC_DMACMD 0x054 |
| #define MSC_CTRL2 0x058 |
| #define MSC_RTCNT 0x05c |
| #define MSC_DBG 0x0fc |
| |
| /* MSC Clock and Control Register (MSC_STRPCL) */ |
| #define MSC_STRPCL_EXIT_MULTIPLE BIT(7) |
| #define MSC_STRPCL_EXIT_TRANSFER BIT(6) |
| #define MSC_STRPCL_START_READWAIT BIT(5) |
| #define MSC_STRPCL_STOP_READWAIT BIT(4) |
| #define MSC_STRPCL_RESET BIT(3) |
| #define MSC_STRPCL_START_OP BIT(2) |
| #define MSC_STRPCL_CLOCK_CONTROL_STOP BIT(0) |
| #define MSC_STRPCL_CLOCK_CONTROL_START BIT(1) |
| |
| /* MSC Status Register (MSC_STAT) */ |
| #define MSC_STAT_AUTO_CMD_DONE BIT(31) |
| #define MSC_STAT_IS_RESETTING BIT(15) |
| #define MSC_STAT_SDIO_INT_ACTIVE BIT(14) |
| #define MSC_STAT_PRG_DONE BIT(13) |
| #define MSC_STAT_DATA_TRAN_DONE BIT(12) |
| #define MSC_STAT_END_CMD_RES BIT(11) |
| #define MSC_STAT_DATA_FIFO_AFULL BIT(10) |
| #define MSC_STAT_IS_READWAIT BIT(9) |
| #define MSC_STAT_CLK_EN BIT(8) |
| #define MSC_STAT_DATA_FIFO_FULL BIT(7) |
| #define MSC_STAT_DATA_FIFO_EMPTY BIT(6) |
| #define MSC_STAT_CRC_RES_ERR BIT(5) |
| #define MSC_STAT_CRC_READ_ERROR BIT(4) |
| #define MSC_STAT_CRC_WRITE_ERROR BIT(2) |
| #define MSC_STAT_CRC_WRITE_ERROR_NOSTS BIT(4) |
| #define MSC_STAT_TIME_OUT_RES BIT(1) |
| #define MSC_STAT_TIME_OUT_READ BIT(0) |
| |
| /* MSC Bus Clock Control Register (MSC_CLKRT) */ |
| #define MSC_CLKRT_CLK_RATE_MASK 0x7 |
| |
| /* MSC Command Sequence Control Register (MSC_CMDAT) */ |
| #define MSC_CMDAT_IO_ABORT BIT(11) |
| #define MSC_CMDAT_BUS_WIDTH_1BIT (0x0 << 9) |
| #define MSC_CMDAT_BUS_WIDTH_4BIT (0x2 << 9) |
| #define MSC_CMDAT_DMA_EN BIT(8) |
| #define MSC_CMDAT_INIT BIT(7) |
| #define MSC_CMDAT_BUSY BIT(6) |
| #define MSC_CMDAT_STREAM_BLOCK BIT(5) |
| #define MSC_CMDAT_WRITE BIT(4) |
| #define MSC_CMDAT_DATA_EN BIT(3) |
| #define MSC_CMDAT_RESPONSE_MASK (0x7 << 0) |
| #define MSC_CMDAT_RESPONSE_NONE (0x0 << 0) /* No response */ |
| #define MSC_CMDAT_RESPONSE_R1 (0x1 << 0) /* Format R1 and R1b */ |
| #define MSC_CMDAT_RESPONSE_R2 (0x2 << 0) /* Format R2 */ |
| #define MSC_CMDAT_RESPONSE_R3 (0x3 << 0) /* Format R3 */ |
| #define MSC_CMDAT_RESPONSE_R4 (0x4 << 0) /* Format R4 */ |
| #define MSC_CMDAT_RESPONSE_R5 (0x5 << 0) /* Format R5 */ |
| #define MSC_CMDAT_RESPONSE_R6 (0x6 << 0) /* Format R6 */ |
| |
| /* MSC Interrupts Mask Register (MSC_IMASK) */ |
| #define MSC_IMASK_TIME_OUT_RES BIT(9) |
| #define MSC_IMASK_TIME_OUT_READ BIT(8) |
| #define MSC_IMASK_SDIO BIT(7) |
| #define MSC_IMASK_TXFIFO_WR_REQ BIT(6) |
| #define MSC_IMASK_RXFIFO_RD_REQ BIT(5) |
| #define MSC_IMASK_END_CMD_RES BIT(2) |
| #define MSC_IMASK_PRG_DONE BIT(1) |
| #define MSC_IMASK_DATA_TRAN_DONE BIT(0) |
| |
| /* MSC Interrupts Status Register (MSC_IREG) */ |
| #define MSC_IREG_TIME_OUT_RES BIT(9) |
| #define MSC_IREG_TIME_OUT_READ BIT(8) |
| #define MSC_IREG_SDIO BIT(7) |
| #define MSC_IREG_TXFIFO_WR_REQ BIT(6) |
| #define MSC_IREG_RXFIFO_RD_REQ BIT(5) |
| #define MSC_IREG_END_CMD_RES BIT(2) |
| #define MSC_IREG_PRG_DONE BIT(1) |
| #define MSC_IREG_DATA_TRAN_DONE BIT(0) |
| |
| struct jz_mmc_plat { |
| struct mmc_config cfg; |
| struct mmc mmc; |
| }; |
| |
| struct jz_mmc_priv { |
| void __iomem *regs; |
| u32 flags; |
| /* priv flags */ |
| #define JZ_MMC_BUS_WIDTH_MASK 0x3 |
| #define JZ_MMC_BUS_WIDTH_1 0x0 |
| #define JZ_MMC_BUS_WIDTH_4 0x2 |
| #define JZ_MMC_BUS_WIDTH_8 0x3 |
| #define JZ_MMC_SENT_INIT BIT(2) |
| }; |
| |
| static int jz_mmc_clock_rate(void) |
| { |
| return 24000000; |
| } |
| |
| #if CONFIG_IS_ENABLED(MMC_WRITE) |
| static inline void jz_mmc_write_data(struct jz_mmc_priv *priv, struct mmc_data *data) |
| { |
| int sz = DIV_ROUND_UP(data->blocks * data->blocksize, 4); |
| const void *buf = data->src; |
| |
| while (sz--) { |
| u32 val = get_unaligned_le32(buf); |
| |
| wait_for_bit_le32(priv->regs + MSC_IREG, |
| MSC_IREG_TXFIFO_WR_REQ, |
| true, 10000, false); |
| writel(val, priv->regs + MSC_TXFIFO); |
| buf += 4; |
| } |
| } |
| #else |
| static void jz_mmc_write_data(struct jz_mmc_priv *priv, struct mmc_data *data) |
| {} |
| #endif |
| |
| static inline int jz_mmc_read_data(struct jz_mmc_priv *priv, struct mmc_data *data) |
| { |
| int sz = data->blocks * data->blocksize; |
| void *buf = data->dest; |
| u32 stat, val; |
| |
| do { |
| stat = readl(priv->regs + MSC_STAT); |
| |
| if (stat & MSC_STAT_TIME_OUT_READ) |
| return -ETIMEDOUT; |
| if (stat & MSC_STAT_CRC_READ_ERROR) |
| return -EINVAL; |
| if (stat & MSC_STAT_DATA_FIFO_EMPTY) { |
| udelay(10); |
| continue; |
| } |
| do { |
| val = readl(priv->regs + MSC_RXFIFO); |
| if (sz == 1) |
| *(u8 *)buf = (u8)val; |
| else if (sz == 2) |
| put_unaligned_le16(val, buf); |
| else if (sz >= 4) |
| put_unaligned_le32(val, buf); |
| buf += 4; |
| sz -= 4; |
| stat = readl(priv->regs + MSC_STAT); |
| } while (!(stat & MSC_STAT_DATA_FIFO_EMPTY)); |
| } while (!(stat & MSC_STAT_DATA_TRAN_DONE)); |
| return 0; |
| } |
| |
| static int jz_mmc_send_cmd(struct mmc *mmc, struct jz_mmc_priv *priv, |
| struct mmc_cmd *cmd, struct mmc_data *data) |
| { |
| u32 stat, mask, cmdat = 0; |
| int i, ret; |
| |
| /* stop the clock */ |
| writel(MSC_STRPCL_CLOCK_CONTROL_STOP, priv->regs + MSC_STRPCL); |
| ret = wait_for_bit_le32(priv->regs + MSC_STAT, |
| MSC_STAT_CLK_EN, false, 10000, false); |
| if (ret) |
| return ret; |
| |
| writel(0, priv->regs + MSC_DMAC); |
| |
| /* setup command */ |
| writel(cmd->cmdidx, priv->regs + MSC_CMD); |
| writel(cmd->cmdarg, priv->regs + MSC_ARG); |
| |
| if (data) { |
| /* setup data */ |
| cmdat |= MSC_CMDAT_DATA_EN; |
| if (data->flags & MMC_DATA_WRITE) |
| cmdat |= MSC_CMDAT_WRITE; |
| |
| writel(data->blocks, priv->regs + MSC_NOB); |
| writel(data->blocksize, priv->regs + MSC_BLKLEN); |
| } else { |
| writel(0, priv->regs + MSC_NOB); |
| writel(0, priv->regs + MSC_BLKLEN); |
| } |
| |
| /* setup response */ |
| switch (cmd->resp_type) { |
| case MMC_RSP_NONE: |
| break; |
| case MMC_RSP_R1: |
| case MMC_RSP_R1b: |
| cmdat |= MSC_CMDAT_RESPONSE_R1; |
| break; |
| case MMC_RSP_R2: |
| cmdat |= MSC_CMDAT_RESPONSE_R2; |
| break; |
| case MMC_RSP_R3: |
| cmdat |= MSC_CMDAT_RESPONSE_R3; |
| break; |
| default: |
| break; |
| } |
| |
| if (cmd->resp_type & MMC_RSP_BUSY) |
| cmdat |= MSC_CMDAT_BUSY; |
| |
| /* set init for the first command only */ |
| if (!(priv->flags & JZ_MMC_SENT_INIT)) { |
| cmdat |= MSC_CMDAT_INIT; |
| priv->flags |= JZ_MMC_SENT_INIT; |
| } |
| |
| cmdat |= (priv->flags & JZ_MMC_BUS_WIDTH_MASK) << 9; |
| |
| /* write the data setup */ |
| writel(cmdat, priv->regs + MSC_CMDAT); |
| |
| /* unmask interrupts */ |
| mask = 0xffffffff & ~(MSC_IMASK_END_CMD_RES | MSC_IMASK_TIME_OUT_RES); |
| if (data) { |
| mask &= ~MSC_IMASK_DATA_TRAN_DONE; |
| if (data->flags & MMC_DATA_WRITE) { |
| mask &= ~MSC_IMASK_TXFIFO_WR_REQ; |
| } else { |
| mask &= ~(MSC_IMASK_RXFIFO_RD_REQ | |
| MSC_IMASK_TIME_OUT_READ); |
| } |
| } |
| writel(mask, priv->regs + MSC_IMASK); |
| |
| /* clear interrupts */ |
| writel(0xffffffff, priv->regs + MSC_IREG); |
| |
| /* start the command (& the clock) */ |
| writel(MSC_STRPCL_START_OP | MSC_STRPCL_CLOCK_CONTROL_START, |
| priv->regs + MSC_STRPCL); |
| |
| /* wait for completion */ |
| for (i = 0; i < 100; i++) { |
| stat = readl(priv->regs + MSC_IREG); |
| stat &= MSC_IREG_END_CMD_RES | MSC_IREG_TIME_OUT_RES; |
| if (stat) |
| break; |
| mdelay(1); |
| } |
| writel(stat, priv->regs + MSC_IREG); |
| if (stat & MSC_IREG_TIME_OUT_RES) |
| return -ETIMEDOUT; |
| |
| if (cmd->resp_type & MMC_RSP_PRESENT) { |
| /* read the response */ |
| if (cmd->resp_type & MMC_RSP_136) { |
| u16 a, b, c, i; |
| |
| a = readw(priv->regs + MSC_RES); |
| for (i = 0; i < 4; i++) { |
| b = readw(priv->regs + MSC_RES); |
| c = readw(priv->regs + MSC_RES); |
| cmd->response[i] = |
| (a << 24) | (b << 8) | (c >> 8); |
| a = c; |
| } |
| } else { |
| cmd->response[0] = readw(priv->regs + MSC_RES) << 24; |
| cmd->response[0] |= readw(priv->regs + MSC_RES) << 8; |
| cmd->response[0] |= readw(priv->regs + MSC_RES) & 0xff; |
| } |
| } |
| if (data) { |
| if (data->flags & MMC_DATA_WRITE) |
| jz_mmc_write_data(priv, data); |
| else if (data->flags & MMC_DATA_READ) { |
| ret = jz_mmc_read_data(priv, data); |
| if (ret) |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int jz_mmc_set_ios(struct mmc *mmc, struct jz_mmc_priv *priv) |
| { |
| u32 real_rate = jz_mmc_clock_rate(); |
| u8 clk_div = 0; |
| |
| /* calculate clock divide */ |
| while ((real_rate > mmc->clock) && (clk_div < 7)) { |
| real_rate >>= 1; |
| clk_div++; |
| } |
| writel(clk_div & MSC_CLKRT_CLK_RATE_MASK, priv->regs + MSC_CLKRT); |
| |
| /* set the bus width for the next command */ |
| priv->flags &= ~JZ_MMC_BUS_WIDTH_MASK; |
| if (mmc->bus_width == 8) |
| priv->flags |= JZ_MMC_BUS_WIDTH_8; |
| else if (mmc->bus_width == 4) |
| priv->flags |= JZ_MMC_BUS_WIDTH_4; |
| else |
| priv->flags |= JZ_MMC_BUS_WIDTH_1; |
| |
| return 0; |
| } |
| |
| static int jz_mmc_core_init(struct mmc *mmc) |
| { |
| struct jz_mmc_priv *priv = mmc->priv; |
| int ret; |
| |
| /* Reset */ |
| writel(MSC_STRPCL_RESET, priv->regs + MSC_STRPCL); |
| ret = wait_for_bit_le32(priv->regs + MSC_STAT, |
| MSC_STAT_IS_RESETTING, false, 10000, false); |
| if (ret) |
| return ret; |
| |
| /* Maximum timeouts */ |
| writel(0xffff, priv->regs + MSC_RESTO); |
| writel(0xffffffff, priv->regs + MSC_RDTO); |
| |
| /* Enable low power mode */ |
| writel(0x1, priv->regs + MSC_LPM); |
| |
| return 0; |
| } |
| |
| #if !CONFIG_IS_ENABLED(DM_MMC) |
| |
| static int jz_mmc_legacy_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, |
| struct mmc_data *data) |
| { |
| struct jz_mmc_priv *priv = mmc->priv; |
| |
| return jz_mmc_send_cmd(mmc, priv, cmd, data); |
| } |
| |
| static int jz_mmc_legacy_set_ios(struct mmc *mmc) |
| { |
| struct jz_mmc_priv *priv = mmc->priv; |
| |
| return jz_mmc_set_ios(mmc, priv); |
| }; |
| |
| static const struct mmc_ops jz_msc_ops = { |
| .send_cmd = jz_mmc_legacy_send_cmd, |
| .set_ios = jz_mmc_legacy_set_ios, |
| .init = jz_mmc_core_init, |
| }; |
| |
| static struct jz_mmc_priv jz_mmc_priv_static; |
| static struct jz_mmc_plat jz_mmc_plat_static = { |
| .cfg = { |
| .name = "MSC", |
| .ops = &jz_msc_ops, |
| |
| .voltages = MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 | |
| MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | |
| MMC_VDD_33_34 | MMC_VDD_34_35 | MMC_VDD_35_36, |
| .host_caps = MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS, |
| |
| .f_min = 375000, |
| .f_max = 48000000, |
| .b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT, |
| }, |
| }; |
| |
| int jz_mmc_init(void __iomem *base) |
| { |
| struct mmc *mmc; |
| |
| jz_mmc_priv_static.regs = base; |
| |
| mmc = mmc_create(&jz_mmc_plat_static.cfg, &jz_mmc_priv_static); |
| |
| return mmc ? 0 : -ENODEV; |
| } |
| |
| #else /* CONFIG_DM_MMC */ |
| |
| #include <dm.h> |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| static int jz_mmc_dm_send_cmd(struct udevice *dev, struct mmc_cmd *cmd, |
| struct mmc_data *data) |
| { |
| struct jz_mmc_priv *priv = dev_get_priv(dev); |
| struct mmc *mmc = mmc_get_mmc_dev(dev); |
| |
| return jz_mmc_send_cmd(mmc, priv, cmd, data); |
| } |
| |
| static int jz_mmc_dm_set_ios(struct udevice *dev) |
| { |
| struct jz_mmc_priv *priv = dev_get_priv(dev); |
| struct mmc *mmc = mmc_get_mmc_dev(dev); |
| |
| return jz_mmc_set_ios(mmc, priv); |
| }; |
| |
| static const struct dm_mmc_ops jz_msc_ops = { |
| .send_cmd = jz_mmc_dm_send_cmd, |
| .set_ios = jz_mmc_dm_set_ios, |
| }; |
| |
| static int jz_mmc_ofdata_to_platdata(struct udevice *dev) |
| { |
| struct jz_mmc_priv *priv = dev_get_priv(dev); |
| struct jz_mmc_plat *plat = dev_get_platdata(dev); |
| struct mmc_config *cfg; |
| int ret; |
| |
| priv->regs = map_physmem(devfdt_get_addr(dev), 0x100, MAP_NOCACHE); |
| cfg = &plat->cfg; |
| |
| cfg->name = "MSC"; |
| cfg->host_caps = MMC_MODE_HS_52MHz | MMC_MODE_HS; |
| |
| ret = mmc_of_parse(dev, cfg); |
| if (ret < 0) { |
| dev_err(dev, "failed to parse host caps\n"); |
| return ret; |
| } |
| |
| cfg->f_min = 400000; |
| cfg->f_max = 52000000; |
| |
| cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; |
| cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT; |
| |
| return 0; |
| } |
| |
| static int jz_mmc_bind(struct udevice *dev) |
| { |
| struct jz_mmc_plat *plat = dev_get_platdata(dev); |
| |
| return mmc_bind(dev, &plat->mmc, &plat->cfg); |
| } |
| |
| static int jz_mmc_probe(struct udevice *dev) |
| { |
| struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); |
| struct jz_mmc_priv *priv = dev_get_priv(dev); |
| struct jz_mmc_plat *plat = dev_get_platdata(dev); |
| |
| plat->mmc.priv = priv; |
| upriv->mmc = &plat->mmc; |
| return jz_mmc_core_init(&plat->mmc); |
| } |
| |
| static const struct udevice_id jz_mmc_ids[] = { |
| { .compatible = "ingenic,jz4780-mmc" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(jz_mmc_drv) = { |
| .name = "jz_mmc", |
| .id = UCLASS_MMC, |
| .of_match = jz_mmc_ids, |
| .ofdata_to_platdata = jz_mmc_ofdata_to_platdata, |
| .bind = jz_mmc_bind, |
| .probe = jz_mmc_probe, |
| .priv_auto_alloc_size = sizeof(struct jz_mmc_priv), |
| .platdata_auto_alloc_size = sizeof(struct jz_mmc_plat), |
| .ops = &jz_msc_ops, |
| }; |
| #endif /* CONFIG_DM_MMC */ |