| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * MediaTek SD/MMC Card Interface driver |
| * |
| * Copyright (C) 2018 MediaTek Inc. |
| * Author: Weijie Gao <weijie.gao@mediatek.com> |
| */ |
| |
| #include <clk.h> |
| #include <common.h> |
| #include <dm.h> |
| #include <mmc.h> |
| #include <errno.h> |
| #include <malloc.h> |
| #include <stdbool.h> |
| #include <watchdog.h> |
| #include <asm/gpio.h> |
| #include <dm/pinctrl.h> |
| #include <linux/bitops.h> |
| #include <linux/io.h> |
| #include <linux/iopoll.h> |
| |
| /* MSDC_CFG */ |
| #define MSDC_CFG_HS400_CK_MODE_EXT BIT(22) |
| #define MSDC_CFG_CKMOD_EXT_M 0x300000 |
| #define MSDC_CFG_CKMOD_EXT_S 20 |
| #define MSDC_CFG_CKDIV_EXT_M 0xfff00 |
| #define MSDC_CFG_CKDIV_EXT_S 8 |
| #define MSDC_CFG_HS400_CK_MODE BIT(18) |
| #define MSDC_CFG_CKMOD_M 0x30000 |
| #define MSDC_CFG_CKMOD_S 16 |
| #define MSDC_CFG_CKDIV_M 0xff00 |
| #define MSDC_CFG_CKDIV_S 8 |
| #define MSDC_CFG_CKSTB BIT(7) |
| #define MSDC_CFG_PIO BIT(3) |
| #define MSDC_CFG_RST BIT(2) |
| #define MSDC_CFG_CKPDN BIT(1) |
| #define MSDC_CFG_MODE BIT(0) |
| |
| /* MSDC_IOCON */ |
| #define MSDC_IOCON_W_DSPL BIT(8) |
| #define MSDC_IOCON_DSPL BIT(2) |
| #define MSDC_IOCON_RSPL BIT(1) |
| |
| /* MSDC_PS */ |
| #define MSDC_PS_DAT0 BIT(16) |
| #define MSDC_PS_CDDBCE_M 0xf000 |
| #define MSDC_PS_CDDBCE_S 12 |
| #define MSDC_PS_CDSTS BIT(1) |
| #define MSDC_PS_CDEN BIT(0) |
| |
| /* #define MSDC_INT(EN) */ |
| #define MSDC_INT_ACMDRDY BIT(3) |
| #define MSDC_INT_ACMDTMO BIT(4) |
| #define MSDC_INT_ACMDCRCERR BIT(5) |
| #define MSDC_INT_DMAQ_EMPTY BIT(6) |
| #define MSDC_INT_CMDRDY BIT(8) |
| #define MSDC_INT_CMDTMO BIT(9) |
| #define MSDC_INT_RSPCRCERR BIT(10) |
| #define MSDC_INT_XFER_COMPL BIT(12) |
| #define MSDC_INT_DXFER_DONE BIT(13) |
| #define MSDC_INT_DATTMO BIT(14) |
| #define MSDC_INT_DATCRCERR BIT(15) |
| |
| /* MSDC_FIFOCS */ |
| #define MSDC_FIFOCS_CLR BIT(31) |
| #define MSDC_FIFOCS_TXCNT_M 0xff0000 |
| #define MSDC_FIFOCS_TXCNT_S 16 |
| #define MSDC_FIFOCS_RXCNT_M 0xff |
| #define MSDC_FIFOCS_RXCNT_S 0 |
| |
| /* MSDC_DMA */ |
| #define MSDC_DMA_CTRL_BURSTSZ (0x7 << 12) |
| #define MSDC_DMA_CTRL_MODE (0x1 << 8) |
| #define MSDC_DMA_CTRL_LASTBUF (0x1 << 10) |
| #define MSDC_DMA_CTRL_START (0x1 << 0) |
| #define MSDC_DMA_CTRL_STOP (0x1 << 1) |
| #define MSDC_DMA_CFG_STS (0x1 << 0) |
| #define MSDC_DMA_CTRL_BURST_64B (6) |
| #define MSDC_DMA_CTRL_LASTBUF_S (10) |
| #define MSDC_DMA_CTRL_BURSTSZ_S (12) |
| |
| /* #define SDC_CFG */ |
| #define SDC_CFG_DTOC_M 0xff000000 |
| #define SDC_CFG_DTOC_S 24 |
| #define SDC_CFG_SDIOIDE BIT(20) |
| #define SDC_CFG_SDIO BIT(19) |
| #define SDC_CFG_BUSWIDTH_M 0x30000 |
| #define SDC_CFG_BUSWIDTH_S 16 |
| |
| /* SDC_CMD */ |
| #define SDC_CMD_BLK_LEN_M 0xfff0000 |
| #define SDC_CMD_BLK_LEN_S 16 |
| #define SDC_CMD_STOP BIT(14) |
| #define SDC_CMD_WR BIT(13) |
| #define SDC_CMD_DTYPE_M 0x1800 |
| #define SDC_CMD_DTYPE_S 11 |
| #define SDC_CMD_RSPTYP_M 0x380 |
| #define SDC_CMD_RSPTYP_S 7 |
| #define SDC_CMD_CMD_M 0x3f |
| #define SDC_CMD_CMD_S 0 |
| |
| /* SDC_STS */ |
| #define SDC_STS_CMDBUSY BIT(1) |
| #define SDC_STS_SDCBUSY BIT(0) |
| |
| /* SDC_ADV_CFG0 */ |
| #define SDC_RX_ENHANCE_EN BIT(20) |
| |
| /* PATCH_BIT0 */ |
| #define MSDC_INT_DAT_LATCH_CK_SEL_M 0x380 |
| #define MSDC_INT_DAT_LATCH_CK_SEL_S 7 |
| |
| /* PATCH_BIT1 */ |
| #define MSDC_PB1_STOP_DLY_M 0xf00 |
| #define MSDC_PB1_STOP_DLY_S 8 |
| |
| /* PATCH_BIT2 */ |
| #define MSDC_PB2_CRCSTSENSEL_M 0xe0000000 |
| #define MSDC_PB2_CRCSTSENSEL_S 29 |
| #define MSDC_PB2_CFGCRCSTS BIT(28) |
| #define MSDC_PB2_RESPSTSENSEL_M 0x70000 |
| #define MSDC_PB2_RESPSTSENSEL_S 16 |
| #define MSDC_PB2_CFGRESP BIT(15) |
| #define MSDC_PB2_RESPWAIT_M 0x0c |
| #define MSDC_PB2_RESPWAIT_S 2 |
| |
| /* PAD_TUNE */ |
| #define MSDC_PAD_TUNE_CMDRRDLY_M 0x7c00000 |
| #define MSDC_PAD_TUNE_CMDRRDLY_S 22 |
| #define MSDC_PAD_TUNE_CMD_SEL BIT(21) |
| #define MSDC_PAD_TUNE_CMDRDLY_M 0x1f0000 |
| #define MSDC_PAD_TUNE_CMDRDLY_S 16 |
| #define MSDC_PAD_TUNE_RXDLYSEL BIT(15) |
| #define MSDC_PAD_TUNE_RD_SEL BIT(13) |
| #define MSDC_PAD_TUNE_DATRRDLY_M 0x1f00 |
| #define MSDC_PAD_TUNE_DATRRDLY_S 8 |
| #define MSDC_PAD_TUNE_DATWRDLY_M 0x1f |
| #define MSDC_PAD_TUNE_DATWRDLY_S 0 |
| |
| /* EMMC50_CFG0 */ |
| #define EMMC50_CFG_CFCSTS_SEL BIT(4) |
| |
| /* SDC_FIFO_CFG */ |
| #define SDC_FIFO_CFG_WRVALIDSEL BIT(24) |
| #define SDC_FIFO_CFG_RDVALIDSEL BIT(25) |
| |
| /* SDC_CFG_BUSWIDTH */ |
| #define MSDC_BUS_1BITS 0x0 |
| #define MSDC_BUS_4BITS 0x1 |
| #define MSDC_BUS_8BITS 0x2 |
| |
| #define MSDC_FIFO_SIZE 128 |
| |
| #define PAD_DELAY_MAX 32 |
| |
| #define DEFAULT_CD_DEBOUNCE 8 |
| |
| #define CMD_INTS_MASK \ |
| (MSDC_INT_CMDRDY | MSDC_INT_RSPCRCERR | MSDC_INT_CMDTMO) |
| |
| #define DATA_INTS_MASK \ |
| (MSDC_INT_XFER_COMPL | MSDC_INT_DATTMO | MSDC_INT_DATCRCERR) |
| |
| /* Register offset */ |
| struct mtk_sd_regs { |
| u32 msdc_cfg; |
| u32 msdc_iocon; |
| u32 msdc_ps; |
| u32 msdc_int; |
| u32 msdc_inten; |
| u32 msdc_fifocs; |
| u32 msdc_txdata; |
| u32 msdc_rxdata; |
| u32 reserved0[4]; |
| u32 sdc_cfg; |
| u32 sdc_cmd; |
| u32 sdc_arg; |
| u32 sdc_sts; |
| u32 sdc_resp[4]; |
| u32 sdc_blk_num; |
| u32 sdc_vol_chg; |
| u32 sdc_csts; |
| u32 sdc_csts_en; |
| u32 sdc_datcrc_sts; |
| u32 sdc_adv_cfg0; |
| u32 reserved1[2]; |
| u32 emmc_cfg0; |
| u32 emmc_cfg1; |
| u32 emmc_sts; |
| u32 emmc_iocon; |
| u32 sd_acmd_resp; |
| u32 sd_acmd19_trg; |
| u32 sd_acmd19_sts; |
| u32 dma_sa_high4bit; |
| u32 dma_sa; |
| u32 dma_ca; |
| u32 dma_ctrl; |
| u32 dma_cfg; |
| u32 sw_dbg_sel; |
| u32 sw_dbg_out; |
| u32 dma_length; |
| u32 reserved2; |
| u32 patch_bit0; |
| u32 patch_bit1; |
| u32 patch_bit2; |
| u32 reserved3; |
| u32 dat0_tune_crc; |
| u32 dat1_tune_crc; |
| u32 dat2_tune_crc; |
| u32 dat3_tune_crc; |
| u32 cmd_tune_crc; |
| u32 sdio_tune_wind; |
| u32 reserved4[5]; |
| u32 pad_tune; |
| u32 pad_tune0; |
| u32 pad_tune1; |
| u32 dat_rd_dly[4]; |
| u32 reserved5[2]; |
| u32 hw_dbg_sel; |
| u32 main_ver; |
| u32 eco_ver; |
| u32 reserved6[27]; |
| u32 pad_ds_tune; |
| u32 reserved7[31]; |
| u32 emmc50_cfg0; |
| u32 reserved8[7]; |
| u32 sdc_fifo_cfg; |
| }; |
| |
| struct msdc_compatible { |
| u8 clk_div_bits; |
| bool pad_tune0; |
| bool async_fifo; |
| bool data_tune; |
| bool busy_check; |
| bool stop_clk_fix; |
| bool enhance_rx; |
| }; |
| |
| struct msdc_delay_phase { |
| u8 maxlen; |
| u8 start; |
| u8 final_phase; |
| }; |
| |
| struct msdc_plat { |
| struct mmc_config cfg; |
| struct mmc mmc; |
| }; |
| |
| struct msdc_tune_para { |
| u32 iocon; |
| u32 pad_tune; |
| }; |
| |
| struct msdc_host { |
| struct mtk_sd_regs *base; |
| struct mmc *mmc; |
| |
| struct msdc_compatible *dev_comp; |
| |
| struct clk src_clk; /* for SD/MMC bus clock */ |
| struct clk src_clk_cg; /* optional, MSDC source clock control gate */ |
| struct clk h_clk; /* MSDC core clock */ |
| |
| u32 src_clk_freq; /* source clock */ |
| u32 mclk; /* mmc framework required bus clock */ |
| u32 sclk; /* actual calculated bus clock */ |
| |
| /* operation timeout clocks */ |
| u32 timeout_ns; |
| u32 timeout_clks; |
| |
| /* tuning options */ |
| u32 hs400_ds_delay; |
| u32 hs200_cmd_int_delay; |
| u32 hs200_write_int_delay; |
| u32 latch_ck; |
| u32 r_smpl; /* sample edge */ |
| bool hs400_mode; |
| |
| /* whether to use gpio detection or built-in hw detection */ |
| bool builtin_cd; |
| |
| /* card detection / write protection GPIOs */ |
| #if CONFIG_IS_ENABLED(DM_GPIO) |
| struct gpio_desc gpio_wp; |
| struct gpio_desc gpio_cd; |
| #endif |
| |
| uint last_resp_type; |
| uint last_data_write; |
| |
| enum bus_mode timing; |
| |
| struct msdc_tune_para def_tune_para; |
| struct msdc_tune_para saved_tune_para; |
| }; |
| |
| static void msdc_set_timeout(struct msdc_host *host, u32 ns, u32 clks); |
| static void msdc_reset_hw(struct msdc_host *host) |
| { |
| u32 reg; |
| |
| setbits_le32(&host->base->msdc_cfg, MSDC_CFG_RST); |
| |
| readl_poll_timeout(&host->base->msdc_cfg, reg, |
| !(reg & MSDC_CFG_RST), 1000000); |
| } |
| |
| static void msdc_fifo_clr(struct msdc_host *host) |
| { |
| u32 reg; |
| |
| setbits_le32(&host->base->msdc_fifocs, MSDC_FIFOCS_CLR); |
| |
| readl_poll_timeout(&host->base->msdc_fifocs, reg, |
| !(reg & MSDC_FIFOCS_CLR), 1000000); |
| } |
| |
| #if defined(CONFIG_MMC_MTK_PIO) |
| static u32 msdc_fifo_rx_bytes(struct msdc_host *host) |
| { |
| return (readl(&host->base->msdc_fifocs) & |
| MSDC_FIFOCS_RXCNT_M) >> MSDC_FIFOCS_RXCNT_S; |
| } |
| |
| static u32 msdc_fifo_tx_bytes(struct msdc_host *host) |
| { |
| return (readl(&host->base->msdc_fifocs) & |
| MSDC_FIFOCS_TXCNT_M) >> MSDC_FIFOCS_TXCNT_S; |
| } |
| #endif // defined(CONFIG_MMC_MTK_PIO) |
| |
| static u32 msdc_cmd_find_resp(struct msdc_host *host, struct mmc_cmd *cmd) |
| { |
| u32 resp; |
| |
| switch (cmd->resp_type) { |
| /* Actually, R1, R5, R6, R7 are the same */ |
| case MMC_RSP_R1: |
| resp = 0x1; |
| break; |
| case MMC_RSP_R1b: |
| resp = 0x7; |
| break; |
| case MMC_RSP_R2: |
| resp = 0x2; |
| break; |
| case MMC_RSP_R3: |
| resp = 0x3; |
| break; |
| case MMC_RSP_NONE: |
| default: |
| resp = 0x0; |
| break; |
| } |
| |
| return resp; |
| } |
| |
| static u32 msdc_cmd_prepare_raw_cmd(struct msdc_host *host, |
| struct mmc_cmd *cmd, |
| struct mmc_data *data) |
| { |
| u32 opcode = cmd->cmdidx; |
| u32 resp_type = msdc_cmd_find_resp(host, cmd); |
| uint blocksize = 0; |
| u32 dtype = 0; |
| u32 rawcmd = 0; |
| |
| switch (opcode) { |
| case MMC_CMD_WRITE_MULTIPLE_BLOCK: |
| case MMC_CMD_READ_MULTIPLE_BLOCK: |
| dtype = 2; |
| break; |
| case MMC_CMD_WRITE_SINGLE_BLOCK: |
| case MMC_CMD_READ_SINGLE_BLOCK: |
| case SD_CMD_APP_SEND_SCR: |
| case MMC_CMD_SEND_TUNING_BLOCK: |
| case MMC_CMD_SEND_TUNING_BLOCK_HS200: |
| dtype = 1; |
| break; |
| case SD_CMD_SWITCH_FUNC: /* same as MMC_CMD_SWITCH */ |
| case SD_CMD_SEND_IF_COND: /* same as MMC_CMD_SEND_EXT_CSD */ |
| case SD_CMD_APP_SD_STATUS: /* same as MMC_CMD_SEND_STATUS */ |
| if (data) |
| dtype = 1; |
| } |
| |
| if (data) { |
| if (data->flags == MMC_DATA_WRITE) |
| rawcmd |= SDC_CMD_WR; |
| |
| if (data->blocks > 1) |
| dtype = 2; |
| |
| blocksize = data->blocksize; |
| } |
| |
| rawcmd |= ((opcode << SDC_CMD_CMD_S) & SDC_CMD_CMD_M) | |
| ((resp_type << SDC_CMD_RSPTYP_S) & SDC_CMD_RSPTYP_M) | |
| ((blocksize << SDC_CMD_BLK_LEN_S) & SDC_CMD_BLK_LEN_M) | |
| ((dtype << SDC_CMD_DTYPE_S) & SDC_CMD_DTYPE_M); |
| |
| if (opcode == MMC_CMD_STOP_TRANSMISSION) |
| rawcmd |= SDC_CMD_STOP; |
| |
| return rawcmd; |
| } |
| |
| static int msdc_cmd_done(struct msdc_host *host, int events, |
| struct mmc_cmd *cmd) |
| { |
| u32 *rsp = cmd->response; |
| int ret = 0; |
| |
| if (cmd->resp_type & MMC_RSP_PRESENT) { |
| if (cmd->resp_type & MMC_RSP_136) { |
| rsp[0] = readl(&host->base->sdc_resp[3]); |
| rsp[1] = readl(&host->base->sdc_resp[2]); |
| rsp[2] = readl(&host->base->sdc_resp[1]); |
| rsp[3] = readl(&host->base->sdc_resp[0]); |
| } else { |
| rsp[0] = readl(&host->base->sdc_resp[0]); |
| } |
| } |
| |
| if (!(events & MSDC_INT_CMDRDY)) { |
| if (cmd->cmdidx != MMC_CMD_SEND_TUNING_BLOCK && |
| cmd->cmdidx != MMC_CMD_SEND_TUNING_BLOCK_HS200) |
| /* |
| * should not clear fifo/interrupt as the tune data |
| * may have alreay come. |
| */ |
| msdc_reset_hw(host); |
| |
| if (events & MSDC_INT_CMDTMO) |
| ret = -ETIMEDOUT; |
| else |
| ret = -EIO; |
| } |
| |
| return ret; |
| } |
| |
| static bool msdc_cmd_is_ready(struct msdc_host *host) |
| { |
| int ret; |
| u32 reg; |
| |
| /* The max busy time we can endure is 20ms */ |
| ret = readl_poll_timeout(&host->base->sdc_sts, reg, |
| !(reg & SDC_STS_CMDBUSY), 20000); |
| |
| if (ret) { |
| pr_err("CMD bus busy detected\n"); |
| msdc_reset_hw(host); |
| return false; |
| } |
| |
| if (host->last_resp_type == MMC_RSP_R1b && host->last_data_write) { |
| ret = readl_poll_timeout(&host->base->msdc_ps, reg, |
| reg & MSDC_PS_DAT0, 1000000); |
| |
| if (ret) { |
| pr_err("Card stuck in programming state!\n"); |
| msdc_reset_hw(host); |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| static int msdc_start_command(struct msdc_host *host, struct mmc_cmd *cmd, |
| struct mmc_data *data) |
| { |
| u32 rawcmd; |
| u32 status; |
| u32 blocks = 0; |
| int ret; |
| |
| if (!msdc_cmd_is_ready(host)) |
| return -EIO; |
| |
| if ((readl(&host->base->msdc_fifocs) & |
| MSDC_FIFOCS_TXCNT_M) >> MSDC_FIFOCS_TXCNT_S || |
| (readl(&host->base->msdc_fifocs) & |
| MSDC_FIFOCS_RXCNT_M) >> MSDC_FIFOCS_RXCNT_S) { |
| pr_err("TX/RX FIFO non-empty before start of IO. Reset\n"); |
| msdc_reset_hw(host); |
| } |
| |
| msdc_fifo_clr(host); |
| |
| host->last_resp_type = cmd->resp_type; |
| host->last_data_write = 0; |
| |
| rawcmd = msdc_cmd_prepare_raw_cmd(host, cmd, data); |
| |
| if (data) { |
| #if !defined(CONFIG_MMC_MTK_PIO) |
| clrbits_le32(&host->base->msdc_cfg, MSDC_CFG_PIO); |
| #endif |
| |
| blocks = data->blocks; |
| } |
| |
| writel(CMD_INTS_MASK, &host->base->msdc_int); |
| writel(blocks, &host->base->sdc_blk_num); |
| writel(cmd->cmdarg, &host->base->sdc_arg); |
| writel(rawcmd, &host->base->sdc_cmd); |
| |
| ret = readl_poll_timeout(&host->base->msdc_int, status, |
| status & CMD_INTS_MASK, 1000000); |
| |
| if (ret) |
| status = MSDC_INT_CMDTMO; |
| |
| return msdc_cmd_done(host, status, cmd); |
| } |
| |
| #if defined(CONFIG_MMC_MTK_PIO) |
| static void msdc_fifo_read(struct msdc_host *host, u8 *buf, u32 size) |
| { |
| u32 *wbuf; |
| |
| while ((size_t)buf % 4) { |
| *buf++ = readb(&host->base->msdc_rxdata); |
| size--; |
| } |
| |
| wbuf = (u32 *)buf; |
| while (size >= 4) { |
| *wbuf++ = readl(&host->base->msdc_rxdata); |
| size -= 4; |
| } |
| |
| buf = (u8 *)wbuf; |
| while (size) { |
| *buf++ = readb(&host->base->msdc_rxdata); |
| size--; |
| } |
| } |
| |
| static void msdc_fifo_write(struct msdc_host *host, const u8 *buf, u32 size) |
| { |
| const u32 *wbuf; |
| |
| while ((size_t)buf % 4) { |
| writeb(*buf++, &host->base->msdc_txdata); |
| size--; |
| } |
| |
| wbuf = (const u32 *)buf; |
| while (size >= 4) { |
| writel(*wbuf++, &host->base->msdc_txdata); |
| size -= 4; |
| } |
| |
| buf = (const u8 *)wbuf; |
| while (size) { |
| writeb(*buf++, &host->base->msdc_txdata); |
| size--; |
| } |
| } |
| |
| static int msdc_pio_read(struct msdc_host *host, u8 *ptr, u32 size) |
| { |
| u32 status; |
| u32 chksz; |
| int ret = 0; |
| |
| while (1) { |
| status = readl(&host->base->msdc_int); |
| writel(status, &host->base->msdc_int); |
| status &= DATA_INTS_MASK; |
| |
| if (status & MSDC_INT_DATCRCERR) { |
| ret = -EIO; |
| break; |
| } |
| |
| if (status & MSDC_INT_DATTMO) { |
| ret = -ETIMEDOUT; |
| break; |
| } |
| |
| chksz = min(size, (u32)MSDC_FIFO_SIZE); |
| |
| if (msdc_fifo_rx_bytes(host) >= chksz) { |
| msdc_fifo_read(host, ptr, chksz); |
| ptr += chksz; |
| size -= chksz; |
| } |
| |
| if (status & MSDC_INT_XFER_COMPL) { |
| if (size) { |
| pr_err("data not fully read\n"); |
| ret = -EIO; |
| } |
| |
| break; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int msdc_pio_write(struct msdc_host *host, const u8 *ptr, u32 size) |
| { |
| u32 status; |
| u32 chksz; |
| int ret = 0; |
| |
| while (1) { |
| status = readl(&host->base->msdc_int); |
| writel(status, &host->base->msdc_int); |
| status &= DATA_INTS_MASK; |
| |
| if (status & MSDC_INT_DATCRCERR) { |
| ret = -EIO; |
| break; |
| } |
| |
| if (status & MSDC_INT_DATTMO) { |
| ret = -ETIMEDOUT; |
| break; |
| } |
| |
| if (status & MSDC_INT_XFER_COMPL) { |
| if (size) { |
| pr_err("data not fully written\n"); |
| ret = -EIO; |
| } |
| |
| break; |
| } |
| |
| chksz = min(size, (u32)MSDC_FIFO_SIZE); |
| |
| if (MSDC_FIFO_SIZE - msdc_fifo_tx_bytes(host) >= chksz) { |
| msdc_fifo_write(host, ptr, chksz); |
| ptr += chksz; |
| size -= chksz; |
| } |
| } |
| |
| return ret; |
| } |
| #else |
| static int msdc_dma_rw(struct msdc_host *host, struct mmc_cmd *cmd, struct mmc_data *data, bool write) { |
| int ret; |
| u32 reg; |
| int timeout = write ? 250 : 100; |
| |
| msdc_set_timeout(host, timeout * 1000000, 0); |
| |
| // Start Address |
| writel((uintptr_t)data->dest, &host->base->dma_sa); |
| |
| // Burst Size |
| clrsetbits_le32(&host->base->dma_ctrl, MSDC_DMA_CTRL_BURSTSZ, MSDC_DMA_CTRL_BURST_64B << MSDC_DMA_CTRL_BURSTSZ_S); |
| |
| // Clear mode bit to set Basic Mode |
| clrbits_le32(&host->base->dma_ctrl, MSDC_DMA_CTRL_MODE); |
| |
| // Only sending one buffer, so set last buffer bit |
| clrsetbits_le32(&host->base->dma_ctrl, MSDC_DMA_CTRL_LASTBUF, 1 << MSDC_DMA_CTRL_LASTBUF_S); |
| |
| // Transaction Length |
| writel(data->blocks * data->blocksize, &host->base->dma_length); |
| |
| // Enable interrupts that we need to check |
| setbits_le32(&host->base->msdc_inten, MSDC_INT_XFER_COMPL | MSDC_INT_DATTMO | MSDC_INT_DATCRCERR); |
| |
| flush_cache((uintptr_t)data->dest, data->blocks * data->blocksize); |
| |
| // Clear interrupts before beginning DMA |
| u32 wints = MSDC_INT_XFER_COMPL | MSDC_INT_DATTMO | MSDC_INT_DATCRCERR | |
| MSDC_INT_DXFER_DONE | MSDC_INT_DMAQ_EMPTY | |
| MSDC_INT_CMDRDY | MSDC_INT_CMDTMO | MSDC_INT_RSPCRCERR; |
| writel(wints, &host->base->msdc_int); |
| |
| setbits_le32(&host->base->dma_ctrl, MSDC_DMA_CTRL_START); |
| do { |
| reg = readl(&host->base->msdc_int); |
| if (!reg) { |
| continue; |
| } |
| |
| if (reg & MSDC_INT_XFER_COMPL) { |
| ret = 0; |
| break; |
| } |
| |
| if (reg == 0 || reg & MSDC_INT_DATTMO || reg & MSDC_INT_DATCRCERR) { |
| ret = -1; |
| break; |
| } else { |
| printf("MSDC: unexpected err 0x%x\n", reg); |
| ret = -2; |
| break; |
| } |
| } while (1); |
| setbits_le32(&host->base->dma_ctrl, MSDC_DMA_CTRL_STOP); |
| while (readl(&host->base->dma_cfg) & MSDC_DMA_CFG_STS); |
| |
| flush_cache((uintptr_t)data->dest, data->blocks * data->blocksize); |
| |
| return ret; |
| } |
| #endif // defined(CONFIG_MMC_MTK_PIO) |
| |
| static int msdc_start_data(struct msdc_host *host, struct mmc_cmd *cmd, struct mmc_data *data) |
| { |
| int ret; |
| |
| WATCHDOG_RESET(); |
| |
| if (data->flags == MMC_DATA_WRITE) |
| host->last_data_write = 1; |
| |
| writel(DATA_INTS_MASK, &host->base->msdc_int); |
| |
| |
| #if defined(CONFIG_MMC_MTK_PIO) |
| u32 size = data->blocks * data->blocksize; |
| if (data->flags == MMC_DATA_WRITE) |
| ret = msdc_pio_write(host, (const u8 *)data->src, size); |
| else |
| ret = msdc_pio_read(host, (u8 *)data->dest, size); |
| #else |
| if (data->flags == MMC_DATA_WRITE) |
| ret = msdc_dma_rw(host, cmd, data, true); |
| else |
| ret = msdc_dma_rw(host, cmd, data, false); |
| #endif |
| |
| if (ret) { |
| msdc_reset_hw(host); |
| msdc_fifo_clr(host); |
| } |
| |
| return ret; |
| } |
| |
| static int msdc_ops_send_cmd(struct udevice *dev, struct mmc_cmd *cmd, |
| struct mmc_data *data) |
| { |
| struct msdc_host *host = dev_get_priv(dev); |
| int cmd_ret, data_ret; |
| |
| cmd_ret = msdc_start_command(host, cmd, data); |
| if (cmd_ret && |
| !(cmd_ret == -EIO && |
| (cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK || |
| cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200))) |
| return cmd_ret; |
| |
| if (data) { |
| data_ret = msdc_start_data(host, cmd, data); |
| #if defined(CONFIG_MMC_MTK_PIO) |
| setbits_le32(&host->base->msdc_cfg, MSDC_CFG_PIO); |
| #endif |
| |
| if (cmd_ret) |
| return cmd_ret; |
| else |
| return data_ret; |
| } |
| |
| return 0; |
| } |
| |
| static void msdc_set_timeout(struct msdc_host *host, u32 ns, u32 clks) |
| { |
| u32 timeout, clk_ns; |
| u32 mode = 0; |
| |
| host->timeout_ns = ns; |
| host->timeout_clks = clks; |
| |
| if (host->sclk == 0) { |
| timeout = 0; |
| } else { |
| clk_ns = 1000000000UL / host->sclk; |
| timeout = (ns + clk_ns - 1) / clk_ns + clks; |
| /* unit is 1048576 sclk cycles */ |
| timeout = (timeout + (0x1 << 20) - 1) >> 20; |
| if (host->dev_comp->clk_div_bits == 8) |
| mode = (readl(&host->base->msdc_cfg) & |
| MSDC_CFG_CKMOD_M) >> MSDC_CFG_CKMOD_S; |
| else |
| mode = (readl(&host->base->msdc_cfg) & |
| MSDC_CFG_CKMOD_EXT_M) >> MSDC_CFG_CKMOD_EXT_S; |
| /* DDR mode will double the clk cycles for data timeout */ |
| timeout = mode >= 2 ? timeout * 2 : timeout; |
| timeout = timeout > 1 ? timeout - 1 : 0; |
| timeout = timeout > 255 ? 255 : timeout; |
| } |
| |
| clrsetbits_le32(&host->base->sdc_cfg, SDC_CFG_DTOC_M, |
| timeout << SDC_CFG_DTOC_S); |
| } |
| |
| static void msdc_set_buswidth(struct msdc_host *host, u32 width) |
| { |
| u32 val = readl(&host->base->sdc_cfg); |
| |
| val &= ~SDC_CFG_BUSWIDTH_M; |
| |
| switch (width) { |
| default: |
| case 1: |
| val |= (MSDC_BUS_1BITS << SDC_CFG_BUSWIDTH_S); |
| break; |
| case 4: |
| val |= (MSDC_BUS_4BITS << SDC_CFG_BUSWIDTH_S); |
| break; |
| case 8: |
| val |= (MSDC_BUS_8BITS << SDC_CFG_BUSWIDTH_S); |
| break; |
| } |
| |
| writel(val, &host->base->sdc_cfg); |
| } |
| |
| static void msdc_set_mclk(struct msdc_host *host, enum bus_mode timing, u32 hz) |
| { |
| u32 mode; |
| u32 div; |
| u32 sclk; |
| u32 reg; |
| |
| if (!hz) { |
| host->mclk = 0; |
| clrbits_le32(&host->base->msdc_cfg, MSDC_CFG_CKPDN); |
| return; |
| } |
| |
| if (host->dev_comp->clk_div_bits == 8) |
| clrbits_le32(&host->base->msdc_cfg, MSDC_CFG_HS400_CK_MODE); |
| else |
| clrbits_le32(&host->base->msdc_cfg, |
| MSDC_CFG_HS400_CK_MODE_EXT); |
| |
| if (timing == UHS_DDR50 || timing == MMC_DDR_52 || |
| timing == MMC_HS_400) { |
| if (timing == MMC_HS_400) |
| mode = 0x3; |
| else |
| mode = 0x2; /* ddr mode and use divisor */ |
| |
| if (hz >= (host->src_clk_freq >> 2)) { |
| div = 0; /* mean div = 1/4 */ |
| sclk = host->src_clk_freq >> 2; /* sclk = clk / 4 */ |
| } else { |
| div = (host->src_clk_freq + ((hz << 2) - 1)) / |
| (hz << 2); |
| sclk = (host->src_clk_freq >> 2) / div; |
| div = (div >> 1); |
| } |
| |
| if (timing == MMC_HS_400 && hz >= (host->src_clk_freq >> 1)) { |
| if (host->dev_comp->clk_div_bits == 8) |
| setbits_le32(&host->base->msdc_cfg, |
| MSDC_CFG_HS400_CK_MODE); |
| else |
| setbits_le32(&host->base->msdc_cfg, |
| MSDC_CFG_HS400_CK_MODE_EXT); |
| |
| sclk = host->src_clk_freq >> 1; |
| div = 0; /* div is ignore when bit18 is set */ |
| } |
| } else if (hz >= host->src_clk_freq) { |
| mode = 0x1; /* no divisor */ |
| div = 0; |
| sclk = host->src_clk_freq; |
| } else { |
| mode = 0x0; /* use divisor */ |
| if (hz >= (host->src_clk_freq >> 1)) { |
| div = 0; /* mean div = 1/2 */ |
| sclk = host->src_clk_freq >> 1; /* sclk = clk / 2 */ |
| } else { |
| div = (host->src_clk_freq + ((hz << 2) - 1)) / |
| (hz << 2); |
| sclk = (host->src_clk_freq >> 2) / div; |
| } |
| } |
| |
| clrbits_le32(&host->base->msdc_cfg, MSDC_CFG_CKPDN); |
| |
| if (host->dev_comp->clk_div_bits == 8) { |
| div = min(div, (u32)(MSDC_CFG_CKDIV_M >> MSDC_CFG_CKDIV_S)); |
| clrsetbits_le32(&host->base->msdc_cfg, |
| MSDC_CFG_CKMOD_M | MSDC_CFG_CKDIV_M, |
| (mode << MSDC_CFG_CKMOD_S) | |
| (div << MSDC_CFG_CKDIV_S)); |
| } else { |
| div = min(div, (u32)(MSDC_CFG_CKDIV_EXT_M >> |
| MSDC_CFG_CKDIV_EXT_S)); |
| clrsetbits_le32(&host->base->msdc_cfg, |
| MSDC_CFG_CKMOD_EXT_M | MSDC_CFG_CKDIV_EXT_M, |
| (mode << MSDC_CFG_CKMOD_EXT_S) | |
| (div << MSDC_CFG_CKDIV_EXT_S)); |
| } |
| |
| readl_poll_timeout(&host->base->msdc_cfg, reg, |
| reg & MSDC_CFG_CKSTB, 1000000); |
| |
| setbits_le32(&host->base->msdc_cfg, MSDC_CFG_CKPDN); |
| host->sclk = sclk; |
| host->mclk = hz; |
| host->timing = timing; |
| |
| /* needed because clk changed. */ |
| msdc_set_timeout(host, host->timeout_ns, host->timeout_clks); |
| |
| /* |
| * mmc_select_hs400() will drop to 50Mhz and High speed mode, |
| * tune result of hs200/200Mhz is not suitable for 50Mhz |
| */ |
| if (host->sclk <= 52000000) { |
| writel(host->def_tune_para.iocon, &host->base->msdc_iocon); |
| writel(host->def_tune_para.pad_tune, |
| &host->base->pad_tune); |
| } else { |
| writel(host->saved_tune_para.iocon, &host->base->msdc_iocon); |
| writel(host->saved_tune_para.pad_tune, |
| &host->base->pad_tune); |
| } |
| |
| dev_dbg(dev, "sclk: %d, timing: %d\n", host->sclk, timing); |
| } |
| |
| static int msdc_ops_set_ios(struct udevice *dev) |
| { |
| struct msdc_plat *plat = dev_get_platdata(dev); |
| struct msdc_host *host = dev_get_priv(dev); |
| struct mmc *mmc = &plat->mmc; |
| uint clock = mmc->clock; |
| |
| msdc_set_buswidth(host, mmc->bus_width); |
| |
| if (mmc->clk_disable) |
| clock = 0; |
| else if (clock < mmc->cfg->f_min) |
| clock = mmc->cfg->f_min; |
| |
| if (host->mclk != clock || host->timing != mmc->selected_mode) |
| msdc_set_mclk(host, mmc->selected_mode, clock); |
| |
| return 0; |
| } |
| |
| static int msdc_ops_get_cd(struct udevice *dev) |
| { |
| struct msdc_host *host = dev_get_priv(dev); |
| u32 val; |
| |
| if (host->builtin_cd) { |
| val = readl(&host->base->msdc_ps); |
| return !(val & MSDC_PS_CDSTS); |
| } |
| |
| #if CONFIG_IS_ENABLED(DM_GPIO) |
| if (!host->gpio_cd.dev) |
| return 1; |
| |
| return dm_gpio_get_value(&host->gpio_cd); |
| #else |
| return 1; |
| #endif |
| } |
| |
| static int msdc_ops_get_wp(struct udevice *dev) |
| { |
| #if CONFIG_IS_ENABLED(DM_GPIO) |
| struct msdc_host *host = dev_get_priv(dev); |
| |
| if (!host->gpio_wp.dev) |
| return 0; |
| |
| return !dm_gpio_get_value(&host->gpio_wp); |
| #else |
| return 0; |
| #endif |
| } |
| |
| #ifdef MMC_SUPPORTS_TUNING |
| static u32 test_delay_bit(u32 delay, u32 bit) |
| { |
| bit %= PAD_DELAY_MAX; |
| return delay & (1 << bit); |
| } |
| |
| static int get_delay_len(u32 delay, u32 start_bit) |
| { |
| int i; |
| |
| for (i = 0; i < (PAD_DELAY_MAX - start_bit); i++) { |
| if (test_delay_bit(delay, start_bit + i) == 0) |
| return i; |
| } |
| |
| return PAD_DELAY_MAX - start_bit; |
| } |
| |
| static struct msdc_delay_phase get_best_delay(struct msdc_host *host, u32 delay) |
| { |
| int start = 0, len = 0; |
| int start_final = 0, len_final = 0; |
| u8 final_phase = 0xff; |
| struct msdc_delay_phase delay_phase = { 0, }; |
| |
| if (delay == 0) { |
| dev_err(dev, "phase error: [map:%x]\n", delay); |
| delay_phase.final_phase = final_phase; |
| return delay_phase; |
| } |
| |
| while (start < PAD_DELAY_MAX) { |
| len = get_delay_len(delay, start); |
| if (len_final < len) { |
| start_final = start; |
| len_final = len; |
| } |
| |
| start += len ? len : 1; |
| if (len >= 12 && start_final < 4) |
| break; |
| } |
| |
| /* The rule is to find the smallest delay cell */ |
| if (start_final == 0) |
| final_phase = (start_final + len_final / 3) % PAD_DELAY_MAX; |
| else |
| final_phase = (start_final + len_final / 2) % PAD_DELAY_MAX; |
| |
| dev_info(dev, "phase: [map:%x] [maxlen:%d] [final:%d]\n", |
| delay, len_final, final_phase); |
| |
| delay_phase.maxlen = len_final; |
| delay_phase.start = start_final; |
| delay_phase.final_phase = final_phase; |
| return delay_phase; |
| } |
| |
| static int msdc_tune_response(struct udevice *dev, u32 opcode) |
| { |
| struct msdc_plat *plat = dev_get_platdata(dev); |
| struct msdc_host *host = dev_get_priv(dev); |
| struct mmc *mmc = &plat->mmc; |
| u32 rise_delay = 0, fall_delay = 0; |
| struct msdc_delay_phase final_rise_delay, final_fall_delay = { 0, }; |
| struct msdc_delay_phase internal_delay_phase; |
| u8 final_delay, final_maxlen; |
| u32 internal_delay = 0; |
| void __iomem *tune_reg = &host->base->pad_tune; |
| int cmd_err; |
| int i, j; |
| |
| if (host->dev_comp->pad_tune0) |
| tune_reg = &host->base->pad_tune0; |
| |
| if (mmc->selected_mode == MMC_HS_200 || |
| mmc->selected_mode == UHS_SDR104) |
| clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_CMDRRDLY_M, |
| host->hs200_cmd_int_delay << |
| MSDC_PAD_TUNE_CMDRRDLY_S); |
| |
| clrbits_le32(&host->base->msdc_iocon, MSDC_IOCON_RSPL); |
| |
| for (i = 0; i < PAD_DELAY_MAX; i++) { |
| clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_CMDRDLY_M, |
| i << MSDC_PAD_TUNE_CMDRDLY_S); |
| |
| for (j = 0; j < 3; j++) { |
| cmd_err = mmc_send_tuning(mmc, opcode, NULL); |
| if (!cmd_err) { |
| rise_delay |= (1 << i); |
| } else { |
| rise_delay &= ~(1 << i); |
| break; |
| } |
| } |
| } |
| |
| final_rise_delay = get_best_delay(host, rise_delay); |
| /* if rising edge has enough margin, do not scan falling edge */ |
| if (final_rise_delay.maxlen >= 12 || |
| (final_rise_delay.start == 0 && final_rise_delay.maxlen >= 4)) |
| goto skip_fall; |
| |
| setbits_le32(&host->base->msdc_iocon, MSDC_IOCON_RSPL); |
| for (i = 0; i < PAD_DELAY_MAX; i++) { |
| clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_CMDRDLY_M, |
| i << MSDC_PAD_TUNE_CMDRDLY_S); |
| |
| for (j = 0; j < 3; j++) { |
| cmd_err = mmc_send_tuning(mmc, opcode, NULL); |
| if (!cmd_err) { |
| fall_delay |= (1 << i); |
| } else { |
| fall_delay &= ~(1 << i); |
| break; |
| } |
| } |
| } |
| |
| final_fall_delay = get_best_delay(host, fall_delay); |
| |
| skip_fall: |
| final_maxlen = max(final_rise_delay.maxlen, final_fall_delay.maxlen); |
| if (final_maxlen == final_rise_delay.maxlen) { |
| clrbits_le32(&host->base->msdc_iocon, MSDC_IOCON_RSPL); |
| clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_CMDRDLY_M, |
| final_rise_delay.final_phase << |
| MSDC_PAD_TUNE_CMDRDLY_S); |
| final_delay = final_rise_delay.final_phase; |
| } else { |
| setbits_le32(&host->base->msdc_iocon, MSDC_IOCON_RSPL); |
| clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_CMDRDLY_M, |
| final_fall_delay.final_phase << |
| MSDC_PAD_TUNE_CMDRDLY_S); |
| final_delay = final_fall_delay.final_phase; |
| } |
| |
| if (host->dev_comp->async_fifo || host->hs200_cmd_int_delay) |
| goto skip_internal; |
| |
| for (i = 0; i < PAD_DELAY_MAX; i++) { |
| clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_CMDRRDLY_M, |
| i << MSDC_PAD_TUNE_CMDRRDLY_S); |
| |
| cmd_err = mmc_send_tuning(mmc, opcode, NULL); |
| if (!cmd_err) |
| internal_delay |= (1 << i); |
| } |
| |
| dev_dbg(dev, "Final internal delay: 0x%x\n", internal_delay); |
| |
| internal_delay_phase = get_best_delay(host, internal_delay); |
| clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_CMDRRDLY_M, |
| internal_delay_phase.final_phase << |
| MSDC_PAD_TUNE_CMDRRDLY_S); |
| |
| skip_internal: |
| dev_dbg(dev, "Final cmd pad delay: %x\n", final_delay); |
| return final_delay == 0xff ? -EIO : 0; |
| } |
| |
| static int msdc_tune_data(struct udevice *dev, u32 opcode) |
| { |
| struct msdc_plat *plat = dev_get_platdata(dev); |
| struct msdc_host *host = dev_get_priv(dev); |
| struct mmc *mmc = &plat->mmc; |
| u32 rise_delay = 0, fall_delay = 0; |
| struct msdc_delay_phase final_rise_delay, final_fall_delay = { 0, }; |
| u8 final_delay, final_maxlen; |
| void __iomem *tune_reg = &host->base->pad_tune; |
| int cmd_err; |
| int i, ret; |
| |
| if (host->dev_comp->pad_tune0) |
| tune_reg = &host->base->pad_tune0; |
| |
| clrbits_le32(&host->base->msdc_iocon, MSDC_IOCON_DSPL); |
| clrbits_le32(&host->base->msdc_iocon, MSDC_IOCON_W_DSPL); |
| |
| for (i = 0; i < PAD_DELAY_MAX; i++) { |
| clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_DATRRDLY_M, |
| i << MSDC_PAD_TUNE_DATRRDLY_S); |
| |
| ret = mmc_send_tuning(mmc, opcode, &cmd_err); |
| if (!ret) { |
| rise_delay |= (1 << i); |
| } else if (cmd_err) { |
| /* in this case, retune response is needed */ |
| ret = msdc_tune_response(dev, opcode); |
| if (ret) |
| break; |
| } |
| } |
| |
| final_rise_delay = get_best_delay(host, rise_delay); |
| if (final_rise_delay.maxlen >= 12 || |
| (final_rise_delay.start == 0 && final_rise_delay.maxlen >= 4)) |
| goto skip_fall; |
| |
| setbits_le32(&host->base->msdc_iocon, MSDC_IOCON_DSPL); |
| setbits_le32(&host->base->msdc_iocon, MSDC_IOCON_W_DSPL); |
| |
| for (i = 0; i < PAD_DELAY_MAX; i++) { |
| clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_DATRRDLY_M, |
| i << MSDC_PAD_TUNE_DATRRDLY_S); |
| |
| ret = mmc_send_tuning(mmc, opcode, &cmd_err); |
| if (!ret) { |
| fall_delay |= (1 << i); |
| } else if (cmd_err) { |
| /* in this case, retune response is needed */ |
| ret = msdc_tune_response(dev, opcode); |
| if (ret) |
| break; |
| } |
| } |
| |
| final_fall_delay = get_best_delay(host, fall_delay); |
| |
| skip_fall: |
| final_maxlen = max(final_rise_delay.maxlen, final_fall_delay.maxlen); |
| if (final_maxlen == final_rise_delay.maxlen) { |
| clrbits_le32(&host->base->msdc_iocon, MSDC_IOCON_DSPL); |
| clrbits_le32(&host->base->msdc_iocon, MSDC_IOCON_W_DSPL); |
| clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_DATRRDLY_M, |
| final_rise_delay.final_phase << |
| MSDC_PAD_TUNE_DATRRDLY_S); |
| final_delay = final_rise_delay.final_phase; |
| } else { |
| setbits_le32(&host->base->msdc_iocon, MSDC_IOCON_DSPL); |
| setbits_le32(&host->base->msdc_iocon, MSDC_IOCON_W_DSPL); |
| clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_DATRRDLY_M, |
| final_fall_delay.final_phase << |
| MSDC_PAD_TUNE_DATRRDLY_S); |
| final_delay = final_fall_delay.final_phase; |
| } |
| |
| if (mmc->selected_mode == MMC_HS_200 || |
| mmc->selected_mode == UHS_SDR104) |
| clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_DATWRDLY_M, |
| host->hs200_write_int_delay << |
| MSDC_PAD_TUNE_DATWRDLY_S); |
| |
| dev_dbg(dev, "Final data pad delay: %x\n", final_delay); |
| |
| return final_delay == 0xff ? -EIO : 0; |
| } |
| |
| static int msdc_execute_tuning(struct udevice *dev, uint opcode) |
| { |
| struct msdc_plat *plat = dev_get_platdata(dev); |
| struct msdc_host *host = dev_get_priv(dev); |
| struct mmc *mmc = &plat->mmc; |
| int ret; |
| |
| if (mmc->selected_mode == MMC_HS_400) { |
| writel(host->hs400_ds_delay, &host->base->pad_ds_tune); |
| /* for hs400 mode it must be set to 0 */ |
| clrbits_le32(&host->base->patch_bit2, MSDC_PB2_CFGCRCSTS); |
| host->hs400_mode = true; |
| } |
| |
| ret = msdc_tune_response(dev, opcode); |
| if (ret == -EIO) { |
| dev_err(dev, "Tune response fail!\n"); |
| return ret; |
| } |
| |
| if (!host->hs400_mode) { |
| ret = msdc_tune_data(dev, opcode); |
| if (ret == -EIO) |
| dev_err(dev, "Tune data fail!\n"); |
| } |
| |
| host->saved_tune_para.iocon = readl(&host->base->msdc_iocon); |
| host->saved_tune_para.pad_tune = readl(&host->base->pad_tune); |
| |
| return ret; |
| } |
| #endif |
| |
| static void msdc_init_hw(struct msdc_host *host) |
| { |
| u32 val; |
| void __iomem *tune_reg = &host->base->pad_tune; |
| |
| if (host->dev_comp->pad_tune0) |
| tune_reg = &host->base->pad_tune0; |
| |
| /* Configure to MMC/SD mode, clock free running */ |
| setbits_le32(&host->base->msdc_cfg, MSDC_CFG_MODE); |
| |
| /* Use PIO mode */ |
| setbits_le32(&host->base->msdc_cfg, MSDC_CFG_PIO); |
| |
| /* Reset */ |
| msdc_reset_hw(host); |
| |
| /* Enable/disable hw card detection according to fdt option */ |
| if (host->builtin_cd) |
| clrsetbits_le32(&host->base->msdc_ps, |
| MSDC_PS_CDDBCE_M, |
| (DEFAULT_CD_DEBOUNCE << MSDC_PS_CDDBCE_S) | |
| MSDC_PS_CDEN); |
| else |
| clrbits_le32(&host->base->msdc_ps, MSDC_PS_CDEN); |
| |
| /* Clear all interrupts */ |
| val = readl(&host->base->msdc_int); |
| writel(val, &host->base->msdc_int); |
| |
| /* Enable data & cmd interrupts */ |
| writel(DATA_INTS_MASK | CMD_INTS_MASK, &host->base->msdc_inten); |
| |
| writel(0, tune_reg); |
| writel(0, &host->base->msdc_iocon); |
| |
| if (host->r_smpl) |
| setbits_le32(&host->base->msdc_iocon, MSDC_IOCON_RSPL); |
| else |
| clrbits_le32(&host->base->msdc_iocon, MSDC_IOCON_RSPL); |
| |
| writel(0x403c0046, &host->base->patch_bit0); |
| writel(0xffff4089, &host->base->patch_bit1); |
| |
| if (host->dev_comp->stop_clk_fix) |
| clrsetbits_le32(&host->base->patch_bit1, MSDC_PB1_STOP_DLY_M, |
| 3 << MSDC_PB1_STOP_DLY_S); |
| |
| if (host->dev_comp->busy_check) |
| clrbits_le32(&host->base->patch_bit1, (1 << 7)); |
| |
| setbits_le32(&host->base->emmc50_cfg0, EMMC50_CFG_CFCSTS_SEL); |
| |
| if (host->dev_comp->async_fifo) { |
| clrsetbits_le32(&host->base->patch_bit2, MSDC_PB2_RESPWAIT_M, |
| 3 << MSDC_PB2_RESPWAIT_S); |
| |
| if (host->dev_comp->enhance_rx) { |
| setbits_le32(&host->base->sdc_adv_cfg0, |
| SDC_RX_ENHANCE_EN); |
| } else { |
| clrsetbits_le32(&host->base->patch_bit2, |
| MSDC_PB2_RESPSTSENSEL_M, |
| 2 << MSDC_PB2_RESPSTSENSEL_S); |
| clrsetbits_le32(&host->base->patch_bit2, |
| MSDC_PB2_CRCSTSENSEL_M, |
| 2 << MSDC_PB2_CRCSTSENSEL_S); |
| } |
| |
| /* use async fifo to avoid tune internal delay */ |
| clrbits_le32(&host->base->patch_bit2, |
| MSDC_PB2_CFGRESP); |
| clrbits_le32(&host->base->patch_bit2, |
| MSDC_PB2_CFGCRCSTS); |
| } |
| |
| if (host->dev_comp->data_tune) { |
| setbits_le32(tune_reg, |
| MSDC_PAD_TUNE_RD_SEL | MSDC_PAD_TUNE_CMD_SEL); |
| clrsetbits_le32(&host->base->patch_bit0, |
| MSDC_INT_DAT_LATCH_CK_SEL_M, |
| host->latch_ck << |
| MSDC_INT_DAT_LATCH_CK_SEL_S); |
| } else { |
| /* choose clock tune */ |
| setbits_le32(tune_reg, MSDC_PAD_TUNE_RXDLYSEL); |
| } |
| |
| /* Configure to enable SDIO mode otherwise sdio cmd5 won't work */ |
| setbits_le32(&host->base->sdc_cfg, SDC_CFG_SDIO); |
| |
| /* disable detecting SDIO device interrupt function */ |
| clrbits_le32(&host->base->sdc_cfg, SDC_CFG_SDIOIDE); |
| |
| /* Configure to default data timeout */ |
| clrsetbits_le32(&host->base->sdc_cfg, SDC_CFG_DTOC_M, |
| 3 << SDC_CFG_DTOC_S); |
| |
| if (host->dev_comp->stop_clk_fix) { |
| clrbits_le32(&host->base->sdc_fifo_cfg, |
| SDC_FIFO_CFG_WRVALIDSEL); |
| clrbits_le32(&host->base->sdc_fifo_cfg, |
| SDC_FIFO_CFG_RDVALIDSEL); |
| } |
| |
| host->def_tune_para.iocon = readl(&host->base->msdc_iocon); |
| host->def_tune_para.pad_tune = readl(&host->base->pad_tune); |
| } |
| |
| static void msdc_ungate_clock(struct msdc_host *host) |
| { |
| clk_enable(&host->src_clk); |
| clk_enable(&host->h_clk); |
| if (host->src_clk_cg.dev) |
| clk_enable(&host->src_clk_cg); |
| } |
| |
| static int msdc_drv_probe(struct udevice *dev) |
| { |
| struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); |
| struct msdc_plat *plat = dev_get_platdata(dev); |
| struct msdc_host *host = dev_get_priv(dev); |
| struct mmc_config *cfg = &plat->cfg; |
| |
| cfg->name = dev->name; |
| |
| host->dev_comp = (struct msdc_compatible *)dev_get_driver_data(dev); |
| |
| host->src_clk_freq = clk_get_rate(&host->src_clk); |
| |
| if (host->dev_comp->clk_div_bits == 8) |
| cfg->f_min = host->src_clk_freq / (4 * 255); |
| else |
| cfg->f_min = host->src_clk_freq / (4 * 4095); |
| cfg->f_max = host->src_clk_freq / 2; |
| |
| cfg->b_max = 1024; |
| cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; |
| |
| host->mmc = &plat->mmc; |
| host->timeout_ns = 100000000; |
| host->timeout_clks = 3 * 1048576; |
| |
| #ifdef CONFIG_PINCTRL |
| pinctrl_select_state(dev, "default"); |
| #endif |
| |
| msdc_ungate_clock(host); |
| msdc_init_hw(host); |
| |
| upriv->mmc = &plat->mmc; |
| |
| return 0; |
| } |
| |
| static int msdc_ofdata_to_platdata(struct udevice *dev) |
| { |
| struct msdc_plat *plat = dev_get_platdata(dev); |
| struct msdc_host *host = dev_get_priv(dev); |
| struct mmc_config *cfg = &plat->cfg; |
| int ret; |
| |
| host->base = (void *)dev_read_addr(dev); |
| if (!host->base) |
| return -EINVAL; |
| |
| ret = mmc_of_parse(dev, cfg); |
| if (ret) |
| return ret; |
| |
| ret = clk_get_by_name(dev, "source", &host->src_clk); |
| if (ret < 0) |
| return ret; |
| |
| ret = clk_get_by_name(dev, "hclk", &host->h_clk); |
| if (ret < 0) |
| return ret; |
| |
| clk_get_by_name(dev, "source_cg", &host->src_clk_cg); /* optional */ |
| |
| #if CONFIG_IS_ENABLED(DM_GPIO) |
| gpio_request_by_name(dev, "wp-gpios", 0, &host->gpio_wp, GPIOD_IS_IN); |
| gpio_request_by_name(dev, "cd-gpios", 0, &host->gpio_cd, GPIOD_IS_IN); |
| #endif |
| |
| host->hs400_ds_delay = dev_read_u32_default(dev, "hs400-ds-delay", 0); |
| host->hs200_cmd_int_delay = |
| dev_read_u32_default(dev, "cmd_int_delay", 0); |
| host->hs200_write_int_delay = |
| dev_read_u32_default(dev, "write_int_delay", 0); |
| host->latch_ck = dev_read_u32_default(dev, "latch-ck", 0); |
| host->r_smpl = dev_read_u32_default(dev, "r_smpl", 0); |
| host->builtin_cd = dev_read_u32_default(dev, "builtin-cd", 0); |
| |
| return 0; |
| } |
| |
| static int msdc_drv_bind(struct udevice *dev) |
| { |
| struct msdc_plat *plat = dev_get_platdata(dev); |
| |
| return mmc_bind(dev, &plat->mmc, &plat->cfg); |
| } |
| |
| static const struct dm_mmc_ops msdc_ops = { |
| .send_cmd = msdc_ops_send_cmd, |
| .set_ios = msdc_ops_set_ios, |
| .get_cd = msdc_ops_get_cd, |
| .get_wp = msdc_ops_get_wp, |
| #ifdef MMC_SUPPORTS_TUNING |
| .execute_tuning = msdc_execute_tuning, |
| #endif |
| }; |
| |
| static const struct msdc_compatible mt7623_compat = { |
| .clk_div_bits = 12, |
| .pad_tune0 = true, |
| .async_fifo = true, |
| .data_tune = true, |
| .busy_check = false, |
| .stop_clk_fix = false, |
| .enhance_rx = false |
| }; |
| |
| static const struct msdc_compatible mt8516_compat = { |
| .clk_div_bits = 12, |
| .pad_tune0 = true, |
| .async_fifo = true, |
| .data_tune = true, |
| .busy_check = true, |
| .stop_clk_fix = true, |
| }; |
| |
| static const struct msdc_compatible mt8183_compat = { |
| .clk_div_bits = 12, |
| .pad_tune0 = true, |
| .async_fifo = true, |
| .data_tune = true, |
| .busy_check = true, |
| .stop_clk_fix = true, |
| }; |
| |
| static const struct udevice_id msdc_ids[] = { |
| { .compatible = "mediatek,mt7623-mmc", .data = (ulong)&mt7623_compat }, |
| { .compatible = "mediatek,mt8516-mmc", .data = (ulong)&mt8516_compat }, |
| { .compatible = "mediatek,mt8183-mmc", .data = (ulong)&mt8183_compat }, |
| {} |
| }; |
| |
| U_BOOT_DRIVER(mtk_sd_drv) = { |
| .name = "mtk_sd", |
| .id = UCLASS_MMC, |
| .of_match = msdc_ids, |
| .ofdata_to_platdata = msdc_ofdata_to_platdata, |
| .bind = msdc_drv_bind, |
| .probe = msdc_drv_probe, |
| .ops = &msdc_ops, |
| .platdata_auto_alloc_size = sizeof(struct msdc_plat), |
| .priv_auto_alloc_size = sizeof(struct msdc_host), |
| }; |