| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2012 |
| * Atmel Semiconductor <www.atmel.com> |
| * Written-by: Bo Shen <voice.shen@atmel.com> |
| */ |
| |
| #include <common.h> |
| #include <clk.h> |
| #include <dm.h> |
| #include <usb.h> |
| #include <asm/io.h> |
| #include <asm/arch/clk.h> |
| |
| #include "ehci.h" |
| |
| #if !CONFIG_IS_ENABLED(DM_USB) |
| |
| int ehci_hcd_init(int index, enum usb_init_type init, |
| struct ehci_hccr **hccr, struct ehci_hcor **hcor) |
| { |
| /* Enable UTMI PLL */ |
| if (at91_upll_clk_enable()) |
| return -1; |
| |
| /* Enable USB Host clock */ |
| at91_periph_clk_enable(ATMEL_ID_UHPHS); |
| |
| *hccr = (struct ehci_hccr *)ATMEL_BASE_EHCI; |
| *hcor = (struct ehci_hcor *)((uint32_t)*hccr + |
| HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase))); |
| |
| return 0; |
| } |
| |
| int ehci_hcd_stop(int index) |
| { |
| /* Disable USB Host Clock */ |
| at91_periph_clk_disable(ATMEL_ID_UHPHS); |
| |
| /* Disable UTMI PLL */ |
| if (at91_upll_clk_disable()) |
| return -1; |
| |
| return 0; |
| } |
| |
| #else |
| |
| struct ehci_atmel_priv { |
| struct ehci_ctrl ehci; |
| }; |
| |
| static int ehci_atmel_enable_clk(struct udevice *dev) |
| { |
| struct clk clk; |
| int ret; |
| |
| ret = clk_get_by_index(dev, 0, &clk); |
| if (ret) |
| return ret; |
| |
| ret = clk_enable(&clk); |
| if (ret) |
| return ret; |
| |
| ret = clk_get_by_index(dev, 1, &clk); |
| if (ret) |
| return -EINVAL; |
| |
| ret = clk_enable(&clk); |
| if (ret) |
| return ret; |
| |
| clk_free(&clk); |
| |
| return 0; |
| } |
| |
| static int ehci_atmel_probe(struct udevice *dev) |
| { |
| struct ehci_hccr *hccr; |
| struct ehci_hcor *hcor; |
| fdt_addr_t hcd_base; |
| int ret; |
| |
| ret = ehci_atmel_enable_clk(dev); |
| if (ret) { |
| debug("Failed to enable USB Host clock\n"); |
| return ret; |
| } |
| |
| /* |
| * Get the base address for EHCI controller from the device node |
| */ |
| hcd_base = devfdt_get_addr(dev); |
| if (hcd_base == FDT_ADDR_T_NONE) { |
| debug("Can't get the EHCI register base address\n"); |
| return -ENXIO; |
| } |
| |
| hccr = (struct ehci_hccr *)hcd_base; |
| hcor = (struct ehci_hcor *) |
| ((u32)hccr + HC_LENGTH(ehci_readl(&hccr->cr_capbase))); |
| |
| debug("echi-atmel: init hccr %x and hcor %x hc_length %d\n", |
| (u32)hccr, (u32)hcor, |
| (u32)HC_LENGTH(ehci_readl(&hccr->cr_capbase))); |
| |
| return ehci_register(dev, hccr, hcor, NULL, 0, USB_INIT_HOST); |
| } |
| |
| static const struct udevice_id ehci_usb_ids[] = { |
| { .compatible = "atmel,at91sam9g45-ehci", }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(ehci_atmel) = { |
| .name = "ehci_atmel", |
| .id = UCLASS_USB, |
| .of_match = ehci_usb_ids, |
| .probe = ehci_atmel_probe, |
| .remove = ehci_deregister, |
| .ops = &ehci_usb_ops, |
| .platdata_auto_alloc_size = sizeof(struct usb_platdata), |
| .priv_auto_alloc_size = sizeof(struct ehci_atmel_priv), |
| .flags = DM_FLAG_ALLOC_PRIV_DMA, |
| }; |
| |
| #endif |