| #ifndef LIBFDT_H |
| #define LIBFDT_H |
| /* |
| * libfdt - Flat Device Tree manipulation |
| * Copyright (C) 2006 David Gibson, IBM Corporation. |
| * |
| * libfdt is dual licensed: you can use it either under the terms of |
| * the GPL, or the BSD license, at your option. |
| * |
| * a) This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public |
| * License along with this library; if not, write to the Free |
| * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, |
| * MA 02110-1301 USA |
| * |
| * Alternatively, |
| * |
| * b) Redistribution and use in source and binary forms, with or |
| * without modification, are permitted provided that the following |
| * conditions are met: |
| * |
| * 1. Redistributions of source code must retain the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer. |
| * 2. Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials |
| * provided with the distribution. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND |
| * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, |
| * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR |
| * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR |
| * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, |
| * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include "libfdt_env.h" |
| #include "fdt.h" |
| |
| #define FDT_FIRST_SUPPORTED_VERSION 0x02 |
| #define FDT_LAST_SUPPORTED_VERSION 0x11 |
| |
| /* Error codes: informative error codes */ |
| #define FDT_ERR_NOTFOUND 1 |
| /* FDT_ERR_NOTFOUND: The requested node or property does not exist */ |
| #define FDT_ERR_EXISTS 2 |
| /* FDT_ERR_EXISTS: Attempted to create a node or property which |
| * already exists */ |
| #define FDT_ERR_NOSPACE 3 |
| /* FDT_ERR_NOSPACE: Operation needed to expand the device |
| * tree, but its buffer did not have sufficient space to |
| * contain the expanded tree. Use fdt_open_into() to move the |
| * device tree to a buffer with more space. */ |
| |
| /* Error codes: codes for bad parameters */ |
| #define FDT_ERR_BADOFFSET 4 |
| /* FDT_ERR_BADOFFSET: Function was passed a structure block |
| * offset which is out-of-bounds, or which points to an |
| * unsuitable part of the structure for the operation. */ |
| #define FDT_ERR_BADPATH 5 |
| /* FDT_ERR_BADPATH: Function was passed a badly formatted path |
| * (e.g. missing a leading / for a function which requires an |
| * absolute path) */ |
| #define FDT_ERR_BADPHANDLE 6 |
| /* FDT_ERR_BADPHANDLE: Function was passed an invalid phandle. |
| * This can be caused either by an invalid phandle property |
| * length, or the phandle value was either 0 or -1, which are |
| * not permitted. */ |
| #define FDT_ERR_BADSTATE 7 |
| /* FDT_ERR_BADSTATE: Function was passed an incomplete device |
| * tree created by the sequential-write functions, which is |
| * not sufficiently complete for the requested operation. */ |
| |
| /* Error codes: codes for bad device tree blobs */ |
| #define FDT_ERR_TRUNCATED 8 |
| /* FDT_ERR_TRUNCATED: Structure block of the given device tree |
| * ends without an FDT_END tag. */ |
| #define FDT_ERR_BADMAGIC 9 |
| /* FDT_ERR_BADMAGIC: Given "device tree" appears not to be a |
| * device tree at all - it is missing the flattened device |
| * tree magic number. */ |
| #define FDT_ERR_BADVERSION 10 |
| /* FDT_ERR_BADVERSION: Given device tree has a version which |
| * can't be handled by the requested operation. For |
| * read-write functions, this may mean that fdt_open_into() is |
| * required to convert the tree to the expected version. */ |
| #define FDT_ERR_BADSTRUCTURE 11 |
| /* FDT_ERR_BADSTRUCTURE: Given device tree has a corrupt |
| * structure block or other serious error (e.g. misnested |
| * nodes, or subnodes preceding properties). */ |
| #define FDT_ERR_BADLAYOUT 12 |
| /* FDT_ERR_BADLAYOUT: For read-write functions, the given |
| * device tree has it's sub-blocks in an order that the |
| * function can't handle (memory reserve map, then structure, |
| * then strings). Use fdt_open_into() to reorganize the tree |
| * into a form suitable for the read-write operations. */ |
| |
| /* "Can't happen" error indicating a bug in libfdt */ |
| #define FDT_ERR_INTERNAL 13 |
| /* FDT_ERR_INTERNAL: libfdt has failed an internal assertion. |
| * Should never be returned, if it is, it indicates a bug in |
| * libfdt itself. */ |
| |
| /* Errors in device tree content */ |
| #define FDT_ERR_BADNCELLS 14 |
| /* FDT_ERR_BADNCELLS: Device tree has a #address-cells, #size-cells |
| * or similar property with a bad format or value */ |
| |
| #define FDT_ERR_BADVALUE 15 |
| /* FDT_ERR_BADVALUE: Device tree has a property with an unexpected |
| * value. For example: a property expected to contain a string list |
| * is not NUL-terminated within the length of its value. */ |
| |
| #define FDT_ERR_BADOVERLAY 16 |
| /* FDT_ERR_BADOVERLAY: The device tree overlay, while |
| * correctly structured, cannot be applied due to some |
| * unexpected or missing value, property or node. */ |
| |
| #define FDT_ERR_NOPHANDLES 17 |
| /* FDT_ERR_NOPHANDLES: The device tree doesn't have any |
| * phandle available anymore without causing an overflow */ |
| |
| #define FDT_ERR_MAX 17 |
| |
| /* constants */ |
| #define FDT_MAX_PHANDLE 0xfffffffe |
| /* Valid values for phandles range from 1 to 2^32-2. */ |
| |
| /**********************************************************************/ |
| /* Low-level functions (you probably don't need these) */ |
| /**********************************************************************/ |
| |
| #ifndef SWIG /* This function is not useful in Python */ |
| const void *fdt_offset_ptr(const void *fdt, int offset, unsigned int checklen); |
| #endif |
| static inline void *fdt_offset_ptr_w(void *fdt, int offset, int checklen) |
| { |
| return (void *)(uintptr_t)fdt_offset_ptr(fdt, offset, checklen); |
| } |
| |
| uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset); |
| |
| /**********************************************************************/ |
| /* Traversal functions */ |
| /**********************************************************************/ |
| |
| int fdt_next_node(const void *fdt, int offset, int *depth); |
| |
| /** |
| * fdt_first_subnode() - get offset of first direct subnode |
| * |
| * @fdt: FDT blob |
| * @offset: Offset of node to check |
| * @return offset of first subnode, or -FDT_ERR_NOTFOUND if there is none |
| */ |
| int fdt_first_subnode(const void *fdt, int offset); |
| |
| /** |
| * fdt_next_subnode() - get offset of next direct subnode |
| * |
| * After first calling fdt_first_subnode(), call this function repeatedly to |
| * get direct subnodes of a parent node. |
| * |
| * @fdt: FDT blob |
| * @offset: Offset of previous subnode |
| * @return offset of next subnode, or -FDT_ERR_NOTFOUND if there are no more |
| * subnodes |
| */ |
| int fdt_next_subnode(const void *fdt, int offset); |
| |
| /** |
| * fdt_for_each_subnode - iterate over all subnodes of a parent |
| * |
| * @node: child node (int, lvalue) |
| * @fdt: FDT blob (const void *) |
| * @parent: parent node (int) |
| * |
| * This is actually a wrapper around a for loop and would be used like so: |
| * |
| * fdt_for_each_subnode(node, fdt, parent) { |
| * Use node |
| * ... |
| * } |
| * |
| * if ((node < 0) && (node != -FDT_ERR_NOT_FOUND)) { |
| * Error handling |
| * } |
| * |
| * Note that this is implemented as a macro and @node is used as |
| * iterator in the loop. The parent variable be constant or even a |
| * literal. |
| * |
| */ |
| #define fdt_for_each_subnode(node, fdt, parent) \ |
| for (node = fdt_first_subnode(fdt, parent); \ |
| node >= 0; \ |
| node = fdt_next_subnode(fdt, node)) |
| |
| /**********************************************************************/ |
| /* General functions */ |
| /**********************************************************************/ |
| #define fdt_get_header(fdt, field) \ |
| (fdt32_to_cpu(((const struct fdt_header *)(fdt))->field)) |
| #define fdt_magic(fdt) (fdt_get_header(fdt, magic)) |
| #define fdt_totalsize(fdt) (fdt_get_header(fdt, totalsize)) |
| #define fdt_off_dt_struct(fdt) (fdt_get_header(fdt, off_dt_struct)) |
| #define fdt_off_dt_strings(fdt) (fdt_get_header(fdt, off_dt_strings)) |
| #define fdt_off_mem_rsvmap(fdt) (fdt_get_header(fdt, off_mem_rsvmap)) |
| #define fdt_version(fdt) (fdt_get_header(fdt, version)) |
| #define fdt_last_comp_version(fdt) (fdt_get_header(fdt, last_comp_version)) |
| #define fdt_boot_cpuid_phys(fdt) (fdt_get_header(fdt, boot_cpuid_phys)) |
| #define fdt_size_dt_strings(fdt) (fdt_get_header(fdt, size_dt_strings)) |
| #define fdt_size_dt_struct(fdt) (fdt_get_header(fdt, size_dt_struct)) |
| |
| #define fdt_set_hdr_(name) \ |
| static inline void fdt_set_##name(void *fdt, uint32_t val) \ |
| { \ |
| struct fdt_header *fdth = (struct fdt_header *)fdt; \ |
| fdth->name = cpu_to_fdt32(val); \ |
| } |
| fdt_set_hdr_(magic); |
| fdt_set_hdr_(totalsize); |
| fdt_set_hdr_(off_dt_struct); |
| fdt_set_hdr_(off_dt_strings); |
| fdt_set_hdr_(off_mem_rsvmap); |
| fdt_set_hdr_(version); |
| fdt_set_hdr_(last_comp_version); |
| fdt_set_hdr_(boot_cpuid_phys); |
| fdt_set_hdr_(size_dt_strings); |
| fdt_set_hdr_(size_dt_struct); |
| #undef fdt_set_hdr_ |
| |
| /** |
| * fdt_check_header - sanity check a device tree or possible device tree |
| * @fdt: pointer to data which might be a flattened device tree |
| * |
| * fdt_check_header() checks that the given buffer contains what |
| * appears to be a flattened device tree with sane information in its |
| * header. |
| * |
| * returns: |
| * 0, if the buffer appears to contain a valid device tree |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, standard meanings, as above |
| */ |
| int fdt_check_header(const void *fdt); |
| |
| /** |
| * fdt_move - move a device tree around in memory |
| * @fdt: pointer to the device tree to move |
| * @buf: pointer to memory where the device is to be moved |
| * @bufsize: size of the memory space at buf |
| * |
| * fdt_move() relocates, if possible, the device tree blob located at |
| * fdt to the buffer at buf of size bufsize. The buffer may overlap |
| * with the existing device tree blob at fdt. Therefore, |
| * fdt_move(fdt, fdt, fdt_totalsize(fdt)) |
| * should always succeed. |
| * |
| * returns: |
| * 0, on success |
| * -FDT_ERR_NOSPACE, bufsize is insufficient to contain the device tree |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, standard meanings |
| */ |
| int fdt_move(const void *fdt, void *buf, int bufsize); |
| |
| /**********************************************************************/ |
| /* Read-only functions */ |
| /**********************************************************************/ |
| |
| /** |
| * fdt_string - retrieve a string from the strings block of a device tree |
| * @fdt: pointer to the device tree blob |
| * @stroffset: offset of the string within the strings block (native endian) |
| * |
| * fdt_string() retrieves a pointer to a single string from the |
| * strings block of the device tree blob at fdt. |
| * |
| * returns: |
| * a pointer to the string, on success |
| * NULL, if stroffset is out of bounds |
| */ |
| const char *fdt_string(const void *fdt, int stroffset); |
| |
| /** |
| * fdt_get_max_phandle - retrieves the highest phandle in a tree |
| * @fdt: pointer to the device tree blob |
| * |
| * fdt_get_max_phandle retrieves the highest phandle in the given |
| * device tree. This will ignore badly formatted phandles, or phandles |
| * with a value of 0 or -1. |
| * |
| * returns: |
| * the highest phandle on success |
| * 0, if no phandle was found in the device tree |
| * -1, if an error occurred |
| */ |
| uint32_t fdt_get_max_phandle(const void *fdt); |
| |
| /** |
| * fdt_generate_phandle - return a new, unused phandle for a device tree blob |
| * @fdt: pointer to the device tree blob |
| * @phandle: return location for the new phandle |
| * |
| * Walks the device tree blob and looks for the highest phandle value. On |
| * success, the new, unused phandle value (one higher than the previously |
| * highest phandle value in the device tree blob) will be returned in the |
| * @phandle parameter. |
| * |
| * Returns: |
| * 0 on success or a negative error-code on failure |
| */ |
| int fdt_generate_phandle(const void *fdt, uint32_t *phandle); |
| |
| /** |
| * fdt_num_mem_rsv - retrieve the number of memory reserve map entries |
| * @fdt: pointer to the device tree blob |
| * |
| * Returns the number of entries in the device tree blob's memory |
| * reservation map. This does not include the terminating 0,0 entry |
| * or any other (0,0) entries reserved for expansion. |
| * |
| * returns: |
| * the number of entries |
| */ |
| int fdt_num_mem_rsv(const void *fdt); |
| |
| /** |
| * fdt_get_mem_rsv - retrieve one memory reserve map entry |
| * @fdt: pointer to the device tree blob |
| * @address, @size: pointers to 64-bit variables |
| * |
| * On success, *address and *size will contain the address and size of |
| * the n-th reserve map entry from the device tree blob, in |
| * native-endian format. |
| * |
| * returns: |
| * 0, on success |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, standard meanings |
| */ |
| int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size); |
| |
| /** |
| * fdt_subnode_offset_namelen - find a subnode based on substring |
| * @fdt: pointer to the device tree blob |
| * @parentoffset: structure block offset of a node |
| * @name: name of the subnode to locate |
| * @namelen: number of characters of name to consider |
| * |
| * Identical to fdt_subnode_offset(), but only examine the first |
| * namelen characters of name for matching the subnode name. This is |
| * useful for finding subnodes based on a portion of a larger string, |
| * such as a full path. |
| */ |
| #ifndef SWIG /* Not available in Python */ |
| int fdt_subnode_offset_namelen(const void *fdt, int parentoffset, |
| const char *name, int namelen); |
| #endif |
| /** |
| * fdt_subnode_offset - find a subnode of a given node |
| * @fdt: pointer to the device tree blob |
| * @parentoffset: structure block offset of a node |
| * @name: name of the subnode to locate |
| * |
| * fdt_subnode_offset() finds a subnode of the node at structure block |
| * offset parentoffset with the given name. name may include a unit |
| * address, in which case fdt_subnode_offset() will find the subnode |
| * with that unit address, or the unit address may be omitted, in |
| * which case fdt_subnode_offset() will find an arbitrary subnode |
| * whose name excluding unit address matches the given name. |
| * |
| * returns: |
| * structure block offset of the requested subnode (>=0), on success |
| * -FDT_ERR_NOTFOUND, if the requested subnode does not exist |
| * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE |
| * tag |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, |
| * -FDT_ERR_TRUNCATED, standard meanings. |
| */ |
| int fdt_subnode_offset(const void *fdt, int parentoffset, const char *name); |
| |
| /** |
| * fdt_path_offset_namelen - find a tree node by its full path |
| * @fdt: pointer to the device tree blob |
| * @path: full path of the node to locate |
| * @namelen: number of characters of path to consider |
| * |
| * Identical to fdt_path_offset(), but only consider the first namelen |
| * characters of path as the path name. |
| */ |
| #ifndef SWIG /* Not available in Python */ |
| int fdt_path_offset_namelen(const void *fdt, const char *path, int namelen); |
| #endif |
| |
| /** |
| * fdt_path_offset - find a tree node by its full path |
| * @fdt: pointer to the device tree blob |
| * @path: full path of the node to locate |
| * |
| * fdt_path_offset() finds a node of a given path in the device tree. |
| * Each path component may omit the unit address portion, but the |
| * results of this are undefined if any such path component is |
| * ambiguous (that is if there are multiple nodes at the relevant |
| * level matching the given component, differentiated only by unit |
| * address). |
| * |
| * returns: |
| * structure block offset of the node with the requested path (>=0), on |
| * success |
| * -FDT_ERR_BADPATH, given path does not begin with '/' or is invalid |
| * -FDT_ERR_NOTFOUND, if the requested node does not exist |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, |
| * -FDT_ERR_TRUNCATED, standard meanings. |
| */ |
| int fdt_path_offset(const void *fdt, const char *path); |
| |
| /** |
| * fdt_get_name - retrieve the name of a given node |
| * @fdt: pointer to the device tree blob |
| * @nodeoffset: structure block offset of the starting node |
| * @lenp: pointer to an integer variable (will be overwritten) or NULL |
| * |
| * fdt_get_name() retrieves the name (including unit address) of the |
| * device tree node at structure block offset nodeoffset. If lenp is |
| * non-NULL, the length of this name is also returned, in the integer |
| * pointed to by lenp. |
| * |
| * returns: |
| * pointer to the node's name, on success |
| * If lenp is non-NULL, *lenp contains the length of that name |
| * (>=0) |
| * NULL, on error |
| * if lenp is non-NULL *lenp contains an error code (<0): |
| * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE |
| * tag |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, standard meanings |
| */ |
| const char *fdt_get_name(const void *fdt, int nodeoffset, int *lenp); |
| |
| /** |
| * fdt_first_property_offset - find the offset of a node's first property |
| * @fdt: pointer to the device tree blob |
| * @nodeoffset: structure block offset of a node |
| * |
| * fdt_first_property_offset() finds the first property of the node at |
| * the given structure block offset. |
| * |
| * returns: |
| * structure block offset of the property (>=0), on success |
| * -FDT_ERR_NOTFOUND, if the requested node has no properties |
| * -FDT_ERR_BADOFFSET, if nodeoffset did not point to an FDT_BEGIN_NODE tag |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, |
| * -FDT_ERR_TRUNCATED, standard meanings. |
| */ |
| int fdt_first_property_offset(const void *fdt, int nodeoffset); |
| |
| /** |
| * fdt_next_property_offset - step through a node's properties |
| * @fdt: pointer to the device tree blob |
| * @offset: structure block offset of a property |
| * |
| * fdt_next_property_offset() finds the property immediately after the |
| * one at the given structure block offset. This will be a property |
| * of the same node as the given property. |
| * |
| * returns: |
| * structure block offset of the next property (>=0), on success |
| * -FDT_ERR_NOTFOUND, if the given property is the last in its node |
| * -FDT_ERR_BADOFFSET, if nodeoffset did not point to an FDT_PROP tag |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, |
| * -FDT_ERR_TRUNCATED, standard meanings. |
| */ |
| int fdt_next_property_offset(const void *fdt, int offset); |
| |
| /** |
| * fdt_for_each_property_offset - iterate over all properties of a node |
| * |
| * @property_offset: property offset (int, lvalue) |
| * @fdt: FDT blob (const void *) |
| * @node: node offset (int) |
| * |
| * This is actually a wrapper around a for loop and would be used like so: |
| * |
| * fdt_for_each_property_offset(property, fdt, node) { |
| * Use property |
| * ... |
| * } |
| * |
| * if ((property < 0) && (property != -FDT_ERR_NOT_FOUND)) { |
| * Error handling |
| * } |
| * |
| * Note that this is implemented as a macro and property is used as |
| * iterator in the loop. The node variable can be constant or even a |
| * literal. |
| */ |
| #define fdt_for_each_property_offset(property, fdt, node) \ |
| for (property = fdt_first_property_offset(fdt, node); \ |
| property >= 0; \ |
| property = fdt_next_property_offset(fdt, property)) |
| |
| /** |
| * fdt_get_property_by_offset - retrieve the property at a given offset |
| * @fdt: pointer to the device tree blob |
| * @offset: offset of the property to retrieve |
| * @lenp: pointer to an integer variable (will be overwritten) or NULL |
| * |
| * fdt_get_property_by_offset() retrieves a pointer to the |
| * fdt_property structure within the device tree blob at the given |
| * offset. If lenp is non-NULL, the length of the property value is |
| * also returned, in the integer pointed to by lenp. |
| * |
| * Note that this code only works on device tree versions >= 16. fdt_getprop() |
| * works on all versions. |
| * |
| * returns: |
| * pointer to the structure representing the property |
| * if lenp is non-NULL, *lenp contains the length of the property |
| * value (>=0) |
| * NULL, on error |
| * if lenp is non-NULL, *lenp contains an error code (<0): |
| * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_PROP tag |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, |
| * -FDT_ERR_TRUNCATED, standard meanings |
| */ |
| const struct fdt_property *fdt_get_property_by_offset(const void *fdt, |
| int offset, |
| int *lenp); |
| |
| /** |
| * fdt_get_property_namelen - find a property based on substring |
| * @fdt: pointer to the device tree blob |
| * @nodeoffset: offset of the node whose property to find |
| * @name: name of the property to find |
| * @namelen: number of characters of name to consider |
| * @lenp: pointer to an integer variable (will be overwritten) or NULL |
| * |
| * Identical to fdt_get_property(), but only examine the first namelen |
| * characters of name for matching the property name. |
| */ |
| #ifndef SWIG /* Not available in Python */ |
| const struct fdt_property *fdt_get_property_namelen(const void *fdt, |
| int nodeoffset, |
| const char *name, |
| int namelen, int *lenp); |
| #endif |
| |
| /** |
| * fdt_get_property - find a given property in a given node |
| * @fdt: pointer to the device tree blob |
| * @nodeoffset: offset of the node whose property to find |
| * @name: name of the property to find |
| * @lenp: pointer to an integer variable (will be overwritten) or NULL |
| * |
| * fdt_get_property() retrieves a pointer to the fdt_property |
| * structure within the device tree blob corresponding to the property |
| * named 'name' of the node at offset nodeoffset. If lenp is |
| * non-NULL, the length of the property value is also returned, in the |
| * integer pointed to by lenp. |
| * |
| * returns: |
| * pointer to the structure representing the property |
| * if lenp is non-NULL, *lenp contains the length of the property |
| * value (>=0) |
| * NULL, on error |
| * if lenp is non-NULL, *lenp contains an error code (<0): |
| * -FDT_ERR_NOTFOUND, node does not have named property |
| * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE |
| * tag |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, |
| * -FDT_ERR_TRUNCATED, standard meanings |
| */ |
| const struct fdt_property *fdt_get_property(const void *fdt, int nodeoffset, |
| const char *name, int *lenp); |
| static inline struct fdt_property *fdt_get_property_w(void *fdt, int nodeoffset, |
| const char *name, |
| int *lenp) |
| { |
| return (struct fdt_property *)(uintptr_t) |
| fdt_get_property(fdt, nodeoffset, name, lenp); |
| } |
| |
| /** |
| * fdt_getprop_by_offset - retrieve the value of a property at a given offset |
| * @fdt: pointer to the device tree blob |
| * @ffset: offset of the property to read |
| * @namep: pointer to a string variable (will be overwritten) or NULL |
| * @lenp: pointer to an integer variable (will be overwritten) or NULL |
| * |
| * fdt_getprop_by_offset() retrieves a pointer to the value of the |
| * property at structure block offset 'offset' (this will be a pointer |
| * to within the device blob itself, not a copy of the value). If |
| * lenp is non-NULL, the length of the property value is also |
| * returned, in the integer pointed to by lenp. If namep is non-NULL, |
| * the property's namne will also be returned in the char * pointed to |
| * by namep (this will be a pointer to within the device tree's string |
| * block, not a new copy of the name). |
| * |
| * returns: |
| * pointer to the property's value |
| * if lenp is non-NULL, *lenp contains the length of the property |
| * value (>=0) |
| * if namep is non-NULL *namep contiains a pointer to the property |
| * name. |
| * NULL, on error |
| * if lenp is non-NULL, *lenp contains an error code (<0): |
| * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_PROP tag |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, |
| * -FDT_ERR_TRUNCATED, standard meanings |
| */ |
| #ifndef SWIG /* This function is not useful in Python */ |
| const void *fdt_getprop_by_offset(const void *fdt, int offset, |
| const char **namep, int *lenp); |
| #endif |
| |
| /** |
| * fdt_getprop_namelen - get property value based on substring |
| * @fdt: pointer to the device tree blob |
| * @nodeoffset: offset of the node whose property to find |
| * @name: name of the property to find |
| * @namelen: number of characters of name to consider |
| * @lenp: pointer to an integer variable (will be overwritten) or NULL |
| * |
| * Identical to fdt_getprop(), but only examine the first namelen |
| * characters of name for matching the property name. |
| */ |
| #ifndef SWIG /* Not available in Python */ |
| const void *fdt_getprop_namelen(const void *fdt, int nodeoffset, |
| const char *name, int namelen, int *lenp); |
| static inline void *fdt_getprop_namelen_w(void *fdt, int nodeoffset, |
| const char *name, int namelen, |
| int *lenp) |
| { |
| return (void *)(uintptr_t)fdt_getprop_namelen(fdt, nodeoffset, name, |
| namelen, lenp); |
| } |
| #endif |
| |
| /** |
| * fdt_getprop - retrieve the value of a given property |
| * @fdt: pointer to the device tree blob |
| * @nodeoffset: offset of the node whose property to find |
| * @name: name of the property to find |
| * @lenp: pointer to an integer variable (will be overwritten) or NULL |
| * |
| * fdt_getprop() retrieves a pointer to the value of the property |
| * named 'name' of the node at offset nodeoffset (this will be a |
| * pointer to within the device blob itself, not a copy of the value). |
| * If lenp is non-NULL, the length of the property value is also |
| * returned, in the integer pointed to by lenp. |
| * |
| * returns: |
| * pointer to the property's value |
| * if lenp is non-NULL, *lenp contains the length of the property |
| * value (>=0) |
| * NULL, on error |
| * if lenp is non-NULL, *lenp contains an error code (<0): |
| * -FDT_ERR_NOTFOUND, node does not have named property |
| * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE |
| * tag |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, |
| * -FDT_ERR_TRUNCATED, standard meanings |
| */ |
| const void *fdt_getprop(const void *fdt, int nodeoffset, |
| const char *name, int *lenp); |
| static inline void *fdt_getprop_w(void *fdt, int nodeoffset, |
| const char *name, int *lenp) |
| { |
| return (void *)(uintptr_t)fdt_getprop(fdt, nodeoffset, name, lenp); |
| } |
| |
| /** |
| * fdt_get_phandle - retrieve the phandle of a given node |
| * @fdt: pointer to the device tree blob |
| * @nodeoffset: structure block offset of the node |
| * |
| * fdt_get_phandle() retrieves the phandle of the device tree node at |
| * structure block offset nodeoffset. |
| * |
| * returns: |
| * the phandle of the node at nodeoffset, on success (!= 0, != -1) |
| * 0, if the node has no phandle, or another error occurs |
| */ |
| uint32_t fdt_get_phandle(const void *fdt, int nodeoffset); |
| |
| /** |
| * fdt_get_alias_namelen - get alias based on substring |
| * @fdt: pointer to the device tree blob |
| * @name: name of the alias th look up |
| * @namelen: number of characters of name to consider |
| * |
| * Identical to fdt_get_alias(), but only examine the first namelen |
| * characters of name for matching the alias name. |
| */ |
| #ifndef SWIG /* Not available in Python */ |
| const char *fdt_get_alias_namelen(const void *fdt, |
| const char *name, int namelen); |
| #endif |
| |
| /** |
| * fdt_get_alias - retrieve the path referenced by a given alias |
| * @fdt: pointer to the device tree blob |
| * @name: name of the alias th look up |
| * |
| * fdt_get_alias() retrieves the value of a given alias. That is, the |
| * value of the property named 'name' in the node /aliases. |
| * |
| * returns: |
| * a pointer to the expansion of the alias named 'name', if it exists |
| * NULL, if the given alias or the /aliases node does not exist |
| */ |
| const char *fdt_get_alias(const void *fdt, const char *name); |
| |
| /** |
| * fdt_get_path - determine the full path of a node |
| * @fdt: pointer to the device tree blob |
| * @nodeoffset: offset of the node whose path to find |
| * @buf: character buffer to contain the returned path (will be overwritten) |
| * @buflen: size of the character buffer at buf |
| * |
| * fdt_get_path() computes the full path of the node at offset |
| * nodeoffset, and records that path in the buffer at buf. |
| * |
| * NOTE: This function is expensive, as it must scan the device tree |
| * structure from the start to nodeoffset. |
| * |
| * returns: |
| * 0, on success |
| * buf contains the absolute path of the node at |
| * nodeoffset, as a NUL-terminated string. |
| * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag |
| * -FDT_ERR_NOSPACE, the path of the given node is longer than (bufsize-1) |
| * characters and will not fit in the given buffer. |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, standard meanings |
| */ |
| int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen); |
| |
| /** |
| * fdt_supernode_atdepth_offset - find a specific ancestor of a node |
| * @fdt: pointer to the device tree blob |
| * @nodeoffset: offset of the node whose parent to find |
| * @supernodedepth: depth of the ancestor to find |
| * @nodedepth: pointer to an integer variable (will be overwritten) or NULL |
| * |
| * fdt_supernode_atdepth_offset() finds an ancestor of the given node |
| * at a specific depth from the root (where the root itself has depth |
| * 0, its immediate subnodes depth 1 and so forth). So |
| * fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, NULL); |
| * will always return 0, the offset of the root node. If the node at |
| * nodeoffset has depth D, then: |
| * fdt_supernode_atdepth_offset(fdt, nodeoffset, D, NULL); |
| * will return nodeoffset itself. |
| * |
| * NOTE: This function is expensive, as it must scan the device tree |
| * structure from the start to nodeoffset. |
| * |
| * returns: |
| * structure block offset of the node at node offset's ancestor |
| * of depth supernodedepth (>=0), on success |
| * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag |
| * -FDT_ERR_NOTFOUND, supernodedepth was greater than the depth of |
| * nodeoffset |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, standard meanings |
| */ |
| int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset, |
| int supernodedepth, int *nodedepth); |
| |
| /** |
| * fdt_node_depth - find the depth of a given node |
| * @fdt: pointer to the device tree blob |
| * @nodeoffset: offset of the node whose parent to find |
| * |
| * fdt_node_depth() finds the depth of a given node. The root node |
| * has depth 0, its immediate subnodes depth 1 and so forth. |
| * |
| * NOTE: This function is expensive, as it must scan the device tree |
| * structure from the start to nodeoffset. |
| * |
| * returns: |
| * depth of the node at nodeoffset (>=0), on success |
| * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, standard meanings |
| */ |
| int fdt_node_depth(const void *fdt, int nodeoffset); |
| |
| /** |
| * fdt_parent_offset - find the parent of a given node |
| * @fdt: pointer to the device tree blob |
| * @nodeoffset: offset of the node whose parent to find |
| * |
| * fdt_parent_offset() locates the parent node of a given node (that |
| * is, it finds the offset of the node which contains the node at |
| * nodeoffset as a subnode). |
| * |
| * NOTE: This function is expensive, as it must scan the device tree |
| * structure from the start to nodeoffset, *twice*. |
| * |
| * returns: |
| * structure block offset of the parent of the node at nodeoffset |
| * (>=0), on success |
| * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, standard meanings |
| */ |
| int fdt_parent_offset(const void *fdt, int nodeoffset); |
| |
| /** |
| * fdt_node_offset_by_prop_value - find nodes with a given property value |
| * @fdt: pointer to the device tree blob |
| * @startoffset: only find nodes after this offset |
| * @propname: property name to check |
| * @propval: property value to search for |
| * @proplen: length of the value in propval |
| * |
| * fdt_node_offset_by_prop_value() returns the offset of the first |
| * node after startoffset, which has a property named propname whose |
| * value is of length proplen and has value equal to propval; or if |
| * startoffset is -1, the very first such node in the tree. |
| * |
| * To iterate through all nodes matching the criterion, the following |
| * idiom can be used: |
| * offset = fdt_node_offset_by_prop_value(fdt, -1, propname, |
| * propval, proplen); |
| * while (offset != -FDT_ERR_NOTFOUND) { |
| * // other code here |
| * offset = fdt_node_offset_by_prop_value(fdt, offset, propname, |
| * propval, proplen); |
| * } |
| * |
| * Note the -1 in the first call to the function, if 0 is used here |
| * instead, the function will never locate the root node, even if it |
| * matches the criterion. |
| * |
| * returns: |
| * structure block offset of the located node (>= 0, >startoffset), |
| * on success |
| * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the |
| * tree after startoffset |
| * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, standard meanings |
| */ |
| int fdt_node_offset_by_prop_value(const void *fdt, int startoffset, |
| const char *propname, |
| const void *propval, int proplen); |
| |
| /** |
| * fdt_node_offset_by_phandle - find the node with a given phandle |
| * @fdt: pointer to the device tree blob |
| * @phandle: phandle value |
| * |
| * fdt_node_offset_by_phandle() returns the offset of the node |
| * which has the given phandle value. If there is more than one node |
| * in the tree with the given phandle (an invalid tree), results are |
| * undefined. |
| * |
| * returns: |
| * structure block offset of the located node (>= 0), on success |
| * -FDT_ERR_NOTFOUND, no node with that phandle exists |
| * -FDT_ERR_BADPHANDLE, given phandle value was invalid (0 or -1) |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, standard meanings |
| */ |
| int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle); |
| |
| /** |
| * fdt_node_check_compatible: check a node's compatible property |
| * @fdt: pointer to the device tree blob |
| * @nodeoffset: offset of a tree node |
| * @compatible: string to match against |
| * |
| * |
| * fdt_node_check_compatible() returns 0 if the given node contains a |
| * 'compatible' property with the given string as one of its elements, |
| * it returns non-zero otherwise, or on error. |
| * |
| * returns: |
| * 0, if the node has a 'compatible' property listing the given string |
| * 1, if the node has a 'compatible' property, but it does not list |
| * the given string |
| * -FDT_ERR_NOTFOUND, if the given node has no 'compatible' property |
| * -FDT_ERR_BADOFFSET, if nodeoffset does not refer to a BEGIN_NODE tag |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, standard meanings |
| */ |
| int fdt_node_check_compatible(const void *fdt, int nodeoffset, |
| const char *compatible); |
| |
| /** |
| * fdt_node_offset_by_compatible - find nodes with a given 'compatible' value |
| * @fdt: pointer to the device tree blob |
| * @startoffset: only find nodes after this offset |
| * @compatible: 'compatible' string to match against |
| * |
| * fdt_node_offset_by_compatible() returns the offset of the first |
| * node after startoffset, which has a 'compatible' property which |
| * lists the given compatible string; or if startoffset is -1, the |
| * very first such node in the tree. |
| * |
| * To iterate through all nodes matching the criterion, the following |
| * idiom can be used: |
| * offset = fdt_node_offset_by_compatible(fdt, -1, compatible); |
| * while (offset != -FDT_ERR_NOTFOUND) { |
| * // other code here |
| * offset = fdt_node_offset_by_compatible(fdt, offset, compatible); |
| * } |
| * |
| * Note the -1 in the first call to the function, if 0 is used here |
| * instead, the function will never locate the root node, even if it |
| * matches the criterion. |
| * |
| * returns: |
| * structure block offset of the located node (>= 0, >startoffset), |
| * on success |
| * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the |
| * tree after startoffset |
| * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, standard meanings |
| */ |
| int fdt_node_offset_by_compatible(const void *fdt, int startoffset, |
| const char *compatible); |
| |
| /** |
| * fdt_stringlist_contains - check a string list property for a string |
| * @strlist: Property containing a list of strings to check |
| * @listlen: Length of property |
| * @str: String to search for |
| * |
| * This is a utility function provided for convenience. The list contains |
| * one or more strings, each terminated by \0, as is found in a device tree |
| * "compatible" property. |
| * |
| * @return: 1 if the string is found in the list, 0 not found, or invalid list |
| */ |
| int fdt_stringlist_contains(const char *strlist, int listlen, const char *str); |
| |
| /** |
| * fdt_stringlist_count - count the number of strings in a string list |
| * @fdt: pointer to the device tree blob |
| * @nodeoffset: offset of a tree node |
| * @property: name of the property containing the string list |
| * @return: |
| * the number of strings in the given property |
| * -FDT_ERR_BADVALUE if the property value is not NUL-terminated |
| * -FDT_ERR_NOTFOUND if the property does not exist |
| */ |
| int fdt_stringlist_count(const void *fdt, int nodeoffset, const char *property); |
| |
| /** |
| * fdt_stringlist_search - find a string in a string list and return its index |
| * @fdt: pointer to the device tree blob |
| * @nodeoffset: offset of a tree node |
| * @property: name of the property containing the string list |
| * @string: string to look up in the string list |
| * |
| * Note that it is possible for this function to succeed on property values |
| * that are not NUL-terminated. That's because the function will stop after |
| * finding the first occurrence of @string. This can for example happen with |
| * small-valued cell properties, such as #address-cells, when searching for |
| * the empty string. |
| * |
| * @return: |
| * the index of the string in the list of strings |
| * -FDT_ERR_BADVALUE if the property value is not NUL-terminated |
| * -FDT_ERR_NOTFOUND if the property does not exist or does not contain |
| * the given string |
| */ |
| int fdt_stringlist_search(const void *fdt, int nodeoffset, const char *property, |
| const char *string); |
| |
| /** |
| * fdt_stringlist_get() - obtain the string at a given index in a string list |
| * @fdt: pointer to the device tree blob |
| * @nodeoffset: offset of a tree node |
| * @property: name of the property containing the string list |
| * @index: index of the string to return |
| * @lenp: return location for the string length or an error code on failure |
| * |
| * Note that this will successfully extract strings from properties with |
| * non-NUL-terminated values. For example on small-valued cell properties |
| * this function will return the empty string. |
| * |
| * If non-NULL, the length of the string (on success) or a negative error-code |
| * (on failure) will be stored in the integer pointer to by lenp. |
| * |
| * @return: |
| * A pointer to the string at the given index in the string list or NULL on |
| * failure. On success the length of the string will be stored in the memory |
| * location pointed to by the lenp parameter, if non-NULL. On failure one of |
| * the following negative error codes will be returned in the lenp parameter |
| * (if non-NULL): |
| * -FDT_ERR_BADVALUE if the property value is not NUL-terminated |
| * -FDT_ERR_NOTFOUND if the property does not exist |
| */ |
| const char *fdt_stringlist_get(const void *fdt, int nodeoffset, |
| const char *property, int index, |
| int *lenp); |
| |
| /**********************************************************************/ |
| /* Read-only functions (addressing related) */ |
| /**********************************************************************/ |
| |
| /** |
| * FDT_MAX_NCELLS - maximum value for #address-cells and #size-cells |
| * |
| * This is the maximum value for #address-cells, #size-cells and |
| * similar properties that will be processed by libfdt. IEE1275 |
| * requires that OF implementations handle values up to 4. |
| * Implementations may support larger values, but in practice higher |
| * values aren't used. |
| */ |
| #define FDT_MAX_NCELLS 4 |
| |
| /** |
| * fdt_address_cells - retrieve address size for a bus represented in the tree |
| * @fdt: pointer to the device tree blob |
| * @nodeoffset: offset of the node to find the address size for |
| * |
| * When the node has a valid #address-cells property, returns its value. |
| * |
| * returns: |
| * 0 <= n < FDT_MAX_NCELLS, on success |
| * 2, if the node has no #address-cells property |
| * -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid |
| * #address-cells property |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, |
| * -FDT_ERR_TRUNCATED, standard meanings |
| */ |
| int fdt_address_cells(const void *fdt, int nodeoffset); |
| |
| /** |
| * fdt_size_cells - retrieve address range size for a bus represented in the |
| * tree |
| * @fdt: pointer to the device tree blob |
| * @nodeoffset: offset of the node to find the address range size for |
| * |
| * When the node has a valid #size-cells property, returns its value. |
| * |
| * returns: |
| * 0 <= n < FDT_MAX_NCELLS, on success |
| * 2, if the node has no #address-cells property |
| * -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid |
| * #size-cells property |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, |
| * -FDT_ERR_TRUNCATED, standard meanings |
| */ |
| int fdt_size_cells(const void *fdt, int nodeoffset); |
| |
| |
| /**********************************************************************/ |
| /* Write-in-place functions */ |
| /**********************************************************************/ |
| |
| /** |
| * fdt_setprop_inplace_namelen_partial - change a property's value, |
| * but not its size |
| * @fdt: pointer to the device tree blob |
| * @nodeoffset: offset of the node whose property to change |
| * @name: name of the property to change |
| * @namelen: number of characters of name to consider |
| * @idx: index of the property to change in the array |
| * @val: pointer to data to replace the property value with |
| * @len: length of the property value |
| * |
| * Identical to fdt_setprop_inplace(), but modifies the given property |
| * starting from the given index, and using only the first characters |
| * of the name. It is useful when you want to manipulate only one value of |
| * an array and you have a string that doesn't end with \0. |
| */ |
| #ifndef SWIG /* Not available in Python */ |
| int fdt_setprop_inplace_namelen_partial(void *fdt, int nodeoffset, |
| const char *name, int namelen, |
| uint32_t idx, const void *val, |
| int len); |
| #endif |
| |
| /** |
| * fdt_setprop_inplace - change a property's value, but not its size |
| * @fdt: pointer to the device tree blob |
| * @nodeoffset: offset of the node whose property to change |
| * @name: name of the property to change |
| * @val: pointer to data to replace the property value with |
| * @len: length of the property value |
| * |
| * fdt_setprop_inplace() replaces the value of a given property with |
| * the data in val, of length len. This function cannot change the |
| * size of a property, and so will only work if len is equal to the |
| * current length of the property. |
| * |
| * This function will alter only the bytes in the blob which contain |
| * the given property value, and will not alter or move any other part |
| * of the tree. |
| * |
| * returns: |
| * 0, on success |
| * -FDT_ERR_NOSPACE, if len is not equal to the property's current length |
| * -FDT_ERR_NOTFOUND, node does not have the named property |
| * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, |
| * -FDT_ERR_TRUNCATED, standard meanings |
| */ |
| #ifndef SWIG /* Not available in Python */ |
| int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, |
| const void *val, int len); |
| #endif |
| |
| /** |
| * fdt_setprop_inplace_u32 - change the value of a 32-bit integer property |
| * @fdt: pointer to the device tree blob |
| * @nodeoffset: offset of the node whose property to change |
| * @name: name of the property to change |
| * @val: 32-bit integer value to replace the property with |
| * |
| * fdt_setprop_inplace_u32() replaces the value of a given property |
| * with the 32-bit integer value in val, converting val to big-endian |
| * if necessary. This function cannot change the size of a property, |
| * and so will only work if the property already exists and has length |
| * 4. |
| * |
| * This function will alter only the bytes in the blob which contain |
| * the given property value, and will not alter or move any other part |
| * of the tree. |
| * |
| * returns: |
| * 0, on success |
| * -FDT_ERR_NOSPACE, if the property's length is not equal to 4 |
| * -FDT_ERR_NOTFOUND, node does not have the named property |
| * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, |
| * -FDT_ERR_TRUNCATED, standard meanings |
| */ |
| static inline int fdt_setprop_inplace_u32(void *fdt, int nodeoffset, |
| const char *name, uint32_t val) |
| { |
| fdt32_t tmp = cpu_to_fdt32(val); |
| return fdt_setprop_inplace(fdt, nodeoffset, name, &tmp, sizeof(tmp)); |
| } |
| |
| /** |
| * fdt_setprop_inplace_u64 - change the value of a 64-bit integer property |
| * @fdt: pointer to the device tree blob |
| * @nodeoffset: offset of the node whose property to change |
| * @name: name of the property to change |
| * @val: 64-bit integer value to replace the property with |
| * |
| * fdt_setprop_inplace_u64() replaces the value of a given property |
| * with the 64-bit integer value in val, converting val to big-endian |
| * if necessary. This function cannot change the size of a property, |
| * and so will only work if the property already exists and has length |
| * 8. |
| * |
| * This function will alter only the bytes in the blob which contain |
| * the given property value, and will not alter or move any other part |
| * of the tree. |
| * |
| * returns: |
| * 0, on success |
| * -FDT_ERR_NOSPACE, if the property's length is not equal to 8 |
| * -FDT_ERR_NOTFOUND, node does not have the named property |
| * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, |
| * -FDT_ERR_TRUNCATED, standard meanings |
| */ |
| static inline int fdt_setprop_inplace_u64(void *fdt, int nodeoffset, |
| const char *name, uint64_t val) |
| { |
| fdt64_t tmp = cpu_to_fdt64(val); |
| return fdt_setprop_inplace(fdt, nodeoffset, name, &tmp, sizeof(tmp)); |
| } |
| |
| /** |
| * fdt_setprop_inplace_cell - change the value of a single-cell property |
| * |
| * This is an alternative name for fdt_setprop_inplace_u32() |
| */ |
| static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset, |
| const char *name, uint32_t val) |
| { |
| return fdt_setprop_inplace_u32(fdt, nodeoffset, name, val); |
| } |
| |
| /** |
| * fdt_nop_property - replace a property with nop tags |
| * @fdt: pointer to the device tree blob |
| * @nodeoffset: offset of the node whose property to nop |
| * @name: name of the property to nop |
| * |
| * fdt_nop_property() will replace a given property's representation |
| * in the blob with FDT_NOP tags, effectively removing it from the |
| * tree. |
| * |
| * This function will alter only the bytes in the blob which contain |
| * the property, and will not alter or move any other part of the |
| * tree. |
| * |
| * returns: |
| * 0, on success |
| * -FDT_ERR_NOTFOUND, node does not have the named property |
| * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, |
| * -FDT_ERR_TRUNCATED, standard meanings |
| */ |
| int fdt_nop_property(void *fdt, int nodeoffset, const char *name); |
| |
| /** |
| * fdt_nop_node - replace a node (subtree) with nop tags |
| * @fdt: pointer to the device tree blob |
| * @nodeoffset: offset of the node to nop |
| * |
| * fdt_nop_node() will replace a given node's representation in the |
| * blob, including all its subnodes, if any, with FDT_NOP tags, |
| * effectively removing it from the tree. |
| * |
| * This function will alter only the bytes in the blob which contain |
| * the node and its properties and subnodes, and will not alter or |
| * move any other part of the tree. |
| * |
| * returns: |
| * 0, on success |
| * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, |
| * -FDT_ERR_TRUNCATED, standard meanings |
| */ |
| int fdt_nop_node(void *fdt, int nodeoffset); |
| |
| /**********************************************************************/ |
| /* Sequential write functions */ |
| /**********************************************************************/ |
| |
| int fdt_create(void *buf, int bufsize); |
| int fdt_resize(void *fdt, void *buf, int bufsize); |
| int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size); |
| int fdt_finish_reservemap(void *fdt); |
| int fdt_begin_node(void *fdt, const char *name); |
| int fdt_property(void *fdt, const char *name, const void *val, int len); |
| static inline int fdt_property_u32(void *fdt, const char *name, uint32_t val) |
| { |
| fdt32_t tmp = cpu_to_fdt32(val); |
| return fdt_property(fdt, name, &tmp, sizeof(tmp)); |
| } |
| static inline int fdt_property_u64(void *fdt, const char *name, uint64_t val) |
| { |
| fdt64_t tmp = cpu_to_fdt64(val); |
| return fdt_property(fdt, name, &tmp, sizeof(tmp)); |
| } |
| |
| #ifndef SWIG /* Not available in Python */ |
| static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val) |
| { |
| return fdt_property_u32(fdt, name, val); |
| } |
| #endif |
| |
| /** |
| * fdt_property_placeholder - add a new property and return a ptr to its value |
| * |
| * @fdt: pointer to the device tree blob |
| * @name: name of property to add |
| * @len: length of property value in bytes |
| * @valp: returns a pointer to where where the value should be placed |
| * |
| * returns: |
| * 0, on success |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_NOSPACE, standard meanings |
| */ |
| int fdt_property_placeholder(void *fdt, const char *name, int len, void **valp); |
| |
| #define fdt_property_string(fdt, name, str) \ |
| fdt_property(fdt, name, str, strlen(str)+1) |
| int fdt_end_node(void *fdt); |
| int fdt_finish(void *fdt); |
| |
| /**********************************************************************/ |
| /* Read-write functions */ |
| /**********************************************************************/ |
| |
| int fdt_create_empty_tree(void *buf, int bufsize); |
| int fdt_open_into(const void *fdt, void *buf, int bufsize); |
| int fdt_pack(void *fdt); |
| |
| /** |
| * fdt_add_mem_rsv - add one memory reserve map entry |
| * @fdt: pointer to the device tree blob |
| * @address, @size: 64-bit values (native endian) |
| * |
| * Adds a reserve map entry to the given blob reserving a region at |
| * address address of length size. |
| * |
| * This function will insert data into the reserve map and will |
| * therefore change the indexes of some entries in the table. |
| * |
| * returns: |
| * 0, on success |
| * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to |
| * contain the new reservation entry |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, |
| * -FDT_ERR_BADLAYOUT, |
| * -FDT_ERR_TRUNCATED, standard meanings |
| */ |
| int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size); |
| |
| /** |
| * fdt_del_mem_rsv - remove a memory reserve map entry |
| * @fdt: pointer to the device tree blob |
| * @n: entry to remove |
| * |
| * fdt_del_mem_rsv() removes the n-th memory reserve map entry from |
| * the blob. |
| * |
| * This function will delete data from the reservation table and will |
| * therefore change the indexes of some entries in the table. |
| * |
| * returns: |
| * 0, on success |
| * -FDT_ERR_NOTFOUND, there is no entry of the given index (i.e. there |
| * are less than n+1 reserve map entries) |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, |
| * -FDT_ERR_BADLAYOUT, |
| * -FDT_ERR_TRUNCATED, standard meanings |
| */ |
| int fdt_del_mem_rsv(void *fdt, int n); |
| |
| /** |
| * fdt_set_name - change the name of a given node |
| * @fdt: pointer to the device tree blob |
| * @nodeoffset: structure block offset of a node |
| * @name: name to give the node |
| * |
| * fdt_set_name() replaces the name (including unit address, if any) |
| * of the given node with the given string. NOTE: this function can't |
| * efficiently check if the new name is unique amongst the given |
| * node's siblings; results are undefined if this function is invoked |
| * with a name equal to one of the given node's siblings. |
| * |
| * This function may insert or delete data from the blob, and will |
| * therefore change the offsets of some existing nodes. |
| * |
| * returns: |
| * 0, on success |
| * -FDT_ERR_NOSPACE, there is insufficient free space in the blob |
| * to contain the new name |
| * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, standard meanings |
| */ |
| int fdt_set_name(void *fdt, int nodeoffset, const char *name); |
| |
| /** |
| * fdt_setprop - create or change a property |
| * @fdt: pointer to the device tree blob |
| * @nodeoffset: offset of the node whose property to change |
| * @name: name of the property to change |
| * @val: pointer to data to set the property value to |
| * @len: length of the property value |
| * |
| * fdt_setprop() sets the value of the named property in the given |
| * node to the given value and length, creating the property if it |
| * does not already exist. |
| * |
| * This function may insert or delete data from the blob, and will |
| * therefore change the offsets of some existing nodes. |
| * |
| * returns: |
| * 0, on success |
| * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to |
| * contain the new property value |
| * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag |
| * -FDT_ERR_BADLAYOUT, |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, |
| * -FDT_ERR_BADLAYOUT, |
| * -FDT_ERR_TRUNCATED, standard meanings |
| */ |
| int fdt_setprop(void *fdt, int nodeoffset, const char *name, |
| const void *val, int len); |
| |
| /** |
| * fdt_setprop_placeholder - allocate space for a property |
| * @fdt: pointer to the device tree blob |
| * @nodeoffset: offset of the node whose property to change |
| * @name: name of the property to change |
| * @len: length of the property value |
| * @prop_data: return pointer to property data |
| * |
| * fdt_setprop_placeholer() allocates the named property in the given node. |
| * If the property exists it is resized. In either case a pointer to the |
| * property data is returned. |
| * |
| * This function may insert or delete data from the blob, and will |
| * therefore change the offsets of some existing nodes. |
| * |
| * returns: |
| * 0, on success |
| * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to |
| * contain the new property value |
| * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag |
| * -FDT_ERR_BADLAYOUT, |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, |
| * -FDT_ERR_BADLAYOUT, |
| * -FDT_ERR_TRUNCATED, standard meanings |
| */ |
| int fdt_setprop_placeholder(void *fdt, int nodeoffset, const char *name, |
| int len, void **prop_data); |
| |
| /** |
| * fdt_setprop_u32 - set a property to a 32-bit integer |
| * @fdt: pointer to the device tree blob |
| * @nodeoffset: offset of the node whose property to change |
| * @name: name of the property to change |
| * @val: 32-bit integer value for the property (native endian) |
| * |
| * fdt_setprop_u32() sets the value of the named property in the given |
| * node to the given 32-bit integer value (converting to big-endian if |
| * necessary), or creates a new property with that value if it does |
| * not already exist. |
| * |
| * This function may insert or delete data from the blob, and will |
| * therefore change the offsets of some existing nodes. |
| * |
| * returns: |
| * 0, on success |
| * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to |
| * contain the new property value |
| * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag |
| * -FDT_ERR_BADLAYOUT, |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, |
| * -FDT_ERR_BADLAYOUT, |
| * -FDT_ERR_TRUNCATED, standard meanings |
| */ |
| static inline int fdt_setprop_u32(void *fdt, int nodeoffset, const char *name, |
| uint32_t val) |
| { |
| fdt32_t tmp = cpu_to_fdt32(val); |
| return fdt_setprop(fdt, nodeoffset, name, &tmp, sizeof(tmp)); |
| } |
| |
| /** |
| * fdt_setprop_u64 - set a property to a 64-bit integer |
| * @fdt: pointer to the device tree blob |
| * @nodeoffset: offset of the node whose property to change |
| * @name: name of the property to change |
| * @val: 64-bit integer value for the property (native endian) |
| * |
| * fdt_setprop_u64() sets the value of the named property in the given |
| * node to the given 64-bit integer value (converting to big-endian if |
| * necessary), or creates a new property with that value if it does |
| * not already exist. |
| * |
| * This function may insert or delete data from the blob, and will |
| * therefore change the offsets of some existing nodes. |
| * |
| * returns: |
| * 0, on success |
| * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to |
| * contain the new property value |
| * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag |
| * -FDT_ERR_BADLAYOUT, |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, |
| * -FDT_ERR_BADLAYOUT, |
| * -FDT_ERR_TRUNCATED, standard meanings |
| */ |
| static inline int fdt_setprop_u64(void *fdt, int nodeoffset, const char *name, |
| uint64_t val) |
| { |
| fdt64_t tmp = cpu_to_fdt64(val); |
| return fdt_setprop(fdt, nodeoffset, name, &tmp, sizeof(tmp)); |
| } |
| |
| /** |
| * fdt_setprop_cell - set a property to a single cell value |
| * |
| * This is an alternative name for fdt_setprop_u32() |
| */ |
| static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name, |
| uint32_t val) |
| { |
| return fdt_setprop_u32(fdt, nodeoffset, name, val); |
| } |
| |
| /** |
| * fdt_setprop_string - set a property to a string value |
| * @fdt: pointer to the device tree blob |
| * @nodeoffset: offset of the node whose property to change |
| * @name: name of the property to change |
| * @str: string value for the property |
| * |
| * fdt_setprop_string() sets the value of the named property in the |
| * given node to the given string value (using the length of the |
| * string to determine the new length of the property), or creates a |
| * new property with that value if it does not already exist. |
| * |
| * This function may insert or delete data from the blob, and will |
| * therefore change the offsets of some existing nodes. |
| * |
| * returns: |
| * 0, on success |
| * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to |
| * contain the new property value |
| * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag |
| * -FDT_ERR_BADLAYOUT, |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, |
| * -FDT_ERR_BADLAYOUT, |
| * -FDT_ERR_TRUNCATED, standard meanings |
| */ |
| #define fdt_setprop_string(fdt, nodeoffset, name, str) \ |
| fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1) |
| |
| |
| /** |
| * fdt_setprop_empty - set a property to an empty value |
| * @fdt: pointer to the device tree blob |
| * @nodeoffset: offset of the node whose property to change |
| * @name: name of the property to change |
| * |
| * fdt_setprop_empty() sets the value of the named property in the |
| * given node to an empty (zero length) value, or creates a new empty |
| * property if it does not already exist. |
| * |
| * This function may insert or delete data from the blob, and will |
| * therefore change the offsets of some existing nodes. |
| * |
| * returns: |
| * 0, on success |
| * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to |
| * contain the new property value |
| * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag |
| * -FDT_ERR_BADLAYOUT, |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, |
| * -FDT_ERR_BADLAYOUT, |
| * -FDT_ERR_TRUNCATED, standard meanings |
| */ |
| #define fdt_setprop_empty(fdt, nodeoffset, name) \ |
| fdt_setprop((fdt), (nodeoffset), (name), NULL, 0) |
| |
| /** |
| * fdt_appendprop - append to or create a property |
| * @fdt: pointer to the device tree blob |
| * @nodeoffset: offset of the node whose property to change |
| * @name: name of the property to append to |
| * @val: pointer to data to append to the property value |
| * @len: length of the data to append to the property value |
| * |
| * fdt_appendprop() appends the value to the named property in the |
| * given node, creating the property if it does not already exist. |
| * |
| * This function may insert data into the blob, and will therefore |
| * change the offsets of some existing nodes. |
| * |
| * returns: |
| * 0, on success |
| * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to |
| * contain the new property value |
| * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag |
| * -FDT_ERR_BADLAYOUT, |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, |
| * -FDT_ERR_BADLAYOUT, |
| * -FDT_ERR_TRUNCATED, standard meanings |
| */ |
| int fdt_appendprop(void *fdt, int nodeoffset, const char *name, |
| const void *val, int len); |
| |
| /** |
| * fdt_appendprop_u32 - append a 32-bit integer value to a property |
| * @fdt: pointer to the device tree blob |
| * @nodeoffset: offset of the node whose property to change |
| * @name: name of the property to change |
| * @val: 32-bit integer value to append to the property (native endian) |
| * |
| * fdt_appendprop_u32() appends the given 32-bit integer value |
| * (converting to big-endian if necessary) to the value of the named |
| * property in the given node, or creates a new property with that |
| * value if it does not already exist. |
| * |
| * This function may insert data into the blob, and will therefore |
| * change the offsets of some existing nodes. |
| * |
| * returns: |
| * 0, on success |
| * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to |
| * contain the new property value |
| * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag |
| * -FDT_ERR_BADLAYOUT, |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, |
| * -FDT_ERR_BADLAYOUT, |
| * -FDT_ERR_TRUNCATED, standard meanings |
| */ |
| static inline int fdt_appendprop_u32(void *fdt, int nodeoffset, |
| const char *name, uint32_t val) |
| { |
| fdt32_t tmp = cpu_to_fdt32(val); |
| return fdt_appendprop(fdt, nodeoffset, name, &tmp, sizeof(tmp)); |
| } |
| |
| /** |
| * fdt_appendprop_u64 - append a 64-bit integer value to a property |
| * @fdt: pointer to the device tree blob |
| * @nodeoffset: offset of the node whose property to change |
| * @name: name of the property to change |
| * @val: 64-bit integer value to append to the property (native endian) |
| * |
| * fdt_appendprop_u64() appends the given 64-bit integer value |
| * (converting to big-endian if necessary) to the value of the named |
| * property in the given node, or creates a new property with that |
| * value if it does not already exist. |
| * |
| * This function may insert data into the blob, and will therefore |
| * change the offsets of some existing nodes. |
| * |
| * returns: |
| * 0, on success |
| * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to |
| * contain the new property value |
| * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag |
| * -FDT_ERR_BADLAYOUT, |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, |
| * -FDT_ERR_BADLAYOUT, |
| * -FDT_ERR_TRUNCATED, standard meanings |
| */ |
| static inline int fdt_appendprop_u64(void *fdt, int nodeoffset, |
| const char *name, uint64_t val) |
| { |
| fdt64_t tmp = cpu_to_fdt64(val); |
| return fdt_appendprop(fdt, nodeoffset, name, &tmp, sizeof(tmp)); |
| } |
| |
| /** |
| * fdt_appendprop_cell - append a single cell value to a property |
| * |
| * This is an alternative name for fdt_appendprop_u32() |
| */ |
| static inline int fdt_appendprop_cell(void *fdt, int nodeoffset, |
| const char *name, uint32_t val) |
| { |
| return fdt_appendprop_u32(fdt, nodeoffset, name, val); |
| } |
| |
| /** |
| * fdt_appendprop_string - append a string to a property |
| * @fdt: pointer to the device tree blob |
| * @nodeoffset: offset of the node whose property to change |
| * @name: name of the property to change |
| * @str: string value to append to the property |
| * |
| * fdt_appendprop_string() appends the given string to the value of |
| * the named property in the given node, or creates a new property |
| * with that value if it does not already exist. |
| * |
| * This function may insert data into the blob, and will therefore |
| * change the offsets of some existing nodes. |
| * |
| * returns: |
| * 0, on success |
| * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to |
| * contain the new property value |
| * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag |
| * -FDT_ERR_BADLAYOUT, |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, |
| * -FDT_ERR_BADLAYOUT, |
| * -FDT_ERR_TRUNCATED, standard meanings |
| */ |
| #define fdt_appendprop_string(fdt, nodeoffset, name, str) \ |
| fdt_appendprop((fdt), (nodeoffset), (name), (str), strlen(str)+1) |
| |
| /** |
| * fdt_delprop - delete a property |
| * @fdt: pointer to the device tree blob |
| * @nodeoffset: offset of the node whose property to nop |
| * @name: name of the property to nop |
| * |
| * fdt_del_property() will delete the given property. |
| * |
| * This function will delete data from the blob, and will therefore |
| * change the offsets of some existing nodes. |
| * |
| * returns: |
| * 0, on success |
| * -FDT_ERR_NOTFOUND, node does not have the named property |
| * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag |
| * -FDT_ERR_BADLAYOUT, |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, |
| * -FDT_ERR_TRUNCATED, standard meanings |
| */ |
| int fdt_delprop(void *fdt, int nodeoffset, const char *name); |
| |
| /** |
| * fdt_add_subnode_namelen - creates a new node based on substring |
| * @fdt: pointer to the device tree blob |
| * @parentoffset: structure block offset of a node |
| * @name: name of the subnode to locate |
| * @namelen: number of characters of name to consider |
| * |
| * Identical to fdt_add_subnode(), but use only the first namelen |
| * characters of name as the name of the new node. This is useful for |
| * creating subnodes based on a portion of a larger string, such as a |
| * full path. |
| */ |
| #ifndef SWIG /* Not available in Python */ |
| int fdt_add_subnode_namelen(void *fdt, int parentoffset, |
| const char *name, int namelen); |
| #endif |
| |
| /** |
| * fdt_add_subnode - creates a new node |
| * @fdt: pointer to the device tree blob |
| * @parentoffset: structure block offset of a node |
| * @name: name of the subnode to locate |
| * |
| * fdt_add_subnode() creates a new node as a subnode of the node at |
| * structure block offset parentoffset, with the given name (which |
| * should include the unit address, if any). |
| * |
| * This function will insert data into the blob, and will therefore |
| * change the offsets of some existing nodes. |
| |
| * returns: |
| * structure block offset of the created nodeequested subnode (>=0), on |
| * success |
| * -FDT_ERR_NOTFOUND, if the requested subnode does not exist |
| * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE |
| * tag |
| * -FDT_ERR_EXISTS, if the node at parentoffset already has a subnode of |
| * the given name |
| * -FDT_ERR_NOSPACE, if there is insufficient free space in the |
| * blob to contain the new node |
| * -FDT_ERR_NOSPACE |
| * -FDT_ERR_BADLAYOUT |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, |
| * -FDT_ERR_TRUNCATED, standard meanings. |
| */ |
| int fdt_add_subnode(void *fdt, int parentoffset, const char *name); |
| |
| /** |
| * fdt_del_node - delete a node (subtree) |
| * @fdt: pointer to the device tree blob |
| * @nodeoffset: offset of the node to nop |
| * |
| * fdt_del_node() will remove the given node, including all its |
| * subnodes if any, from the blob. |
| * |
| * This function will delete data from the blob, and will therefore |
| * change the offsets of some existing nodes. |
| * |
| * returns: |
| * 0, on success |
| * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag |
| * -FDT_ERR_BADLAYOUT, |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_BADSTRUCTURE, |
| * -FDT_ERR_TRUNCATED, standard meanings |
| */ |
| int fdt_del_node(void *fdt, int nodeoffset); |
| |
| /** |
| * fdt_overlay_apply - Applies a DT overlay on a base DT |
| * @fdt: pointer to the base device tree blob |
| * @fdto: pointer to the device tree overlay blob |
| * |
| * fdt_overlay_apply() will apply the given device tree overlay on the |
| * given base device tree. |
| * |
| * Expect the base device tree to be modified, even if the function |
| * returns an error. |
| * |
| * returns: |
| * 0, on success |
| * -FDT_ERR_NOSPACE, there's not enough space in the base device tree |
| * -FDT_ERR_NOTFOUND, the overlay points to some inexistant nodes or |
| * properties in the base DT |
| * -FDT_ERR_BADPHANDLE, |
| * -FDT_ERR_BADOVERLAY, |
| * -FDT_ERR_NOPHANDLES, |
| * -FDT_ERR_INTERNAL, |
| * -FDT_ERR_BADLAYOUT, |
| * -FDT_ERR_BADMAGIC, |
| * -FDT_ERR_BADOFFSET, |
| * -FDT_ERR_BADPATH, |
| * -FDT_ERR_BADVERSION, |
| * -FDT_ERR_BADSTRUCTURE, |
| * -FDT_ERR_BADSTATE, |
| * -FDT_ERR_TRUNCATED, standard meanings |
| */ |
| int fdt_overlay_apply(void *fdt, void *fdto); |
| |
| /**********************************************************************/ |
| /* Debugging / informational functions */ |
| /**********************************************************************/ |
| |
| const char *fdt_strerror(int errval); |
| |
| #endif /* LIBFDT_H */ |