| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2003 |
| * Steven Scholz, imc Measurement & Control, steven.scholz@imc-berlin.de |
| * |
| * (C) Copyright 2002 |
| * Rich Ireland, Enterasys Networks, rireland@enterasys.com. |
| */ |
| |
| /* |
| * Altera FPGA support |
| */ |
| #include <common.h> |
| #include <errno.h> |
| #include <ACEX1K.h> |
| #include <stratixII.h> |
| |
| /* Define FPGA_DEBUG to 1 to get debug printf's */ |
| #define FPGA_DEBUG 0 |
| |
| static const struct altera_fpga { |
| enum altera_family family; |
| const char *name; |
| int (*load)(Altera_desc *, const void *, size_t); |
| int (*dump)(Altera_desc *, const void *, size_t); |
| int (*info)(Altera_desc *); |
| } altera_fpga[] = { |
| #if defined(CONFIG_FPGA_ACEX1K) |
| { Altera_ACEX1K, "ACEX1K", ACEX1K_load, ACEX1K_dump, ACEX1K_info }, |
| { Altera_CYC2, "ACEX1K", ACEX1K_load, ACEX1K_dump, ACEX1K_info }, |
| #elif defined(CONFIG_FPGA_CYCLON2) |
| { Altera_ACEX1K, "CycloneII", CYC2_load, CYC2_dump, CYC2_info }, |
| { Altera_CYC2, "CycloneII", CYC2_load, CYC2_dump, CYC2_info }, |
| #endif |
| #if defined(CONFIG_FPGA_STRATIX_II) |
| { Altera_StratixII, "StratixII", StratixII_load, |
| StratixII_dump, StratixII_info }, |
| #endif |
| #if defined(CONFIG_FPGA_STRATIX_V) |
| { Altera_StratixV, "StratixV", stratixv_load, NULL, NULL }, |
| #endif |
| #if defined(CONFIG_FPGA_STRATIX10) |
| { Intel_FPGA_Stratix10, "Stratix10", stratix10_load, NULL, NULL }, |
| #endif |
| #if defined(CONFIG_FPGA_SOCFPGA) |
| { Altera_SoCFPGA, "SoC FPGA", socfpga_load, NULL, NULL }, |
| #endif |
| }; |
| |
| static int altera_validate(Altera_desc *desc, const char *fn) |
| { |
| if (!desc) { |
| printf("%s: NULL descriptor!\n", fn); |
| return -EINVAL; |
| } |
| |
| if ((desc->family < min_altera_type) || |
| (desc->family > max_altera_type)) { |
| printf("%s: Invalid family type, %d\n", fn, desc->family); |
| return -EINVAL; |
| } |
| |
| if ((desc->iface < min_altera_iface_type) || |
| (desc->iface > max_altera_iface_type)) { |
| printf("%s: Invalid Interface type, %d\n", fn, desc->iface); |
| return -EINVAL; |
| } |
| |
| if (!desc->size) { |
| printf("%s: NULL part size\n", fn); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static const struct altera_fpga * |
| altera_desc_to_fpga(Altera_desc *desc, const char *fn) |
| { |
| int i; |
| |
| if (altera_validate(desc, fn)) { |
| printf("%s: Invalid device descriptor\n", fn); |
| return NULL; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(altera_fpga); i++) { |
| if (desc->family == altera_fpga[i].family) |
| break; |
| } |
| |
| if (i == ARRAY_SIZE(altera_fpga)) { |
| printf("%s: Unsupported family type, %d\n", fn, desc->family); |
| return NULL; |
| } |
| |
| return &altera_fpga[i]; |
| } |
| |
| int altera_load(Altera_desc *desc, const void *buf, size_t bsize) |
| { |
| const struct altera_fpga *fpga = altera_desc_to_fpga(desc, __func__); |
| |
| if (!fpga) |
| return FPGA_FAIL; |
| |
| debug_cond(FPGA_DEBUG, "%s: Launching the %s Loader...\n", |
| __func__, fpga->name); |
| if (fpga->load) |
| return fpga->load(desc, buf, bsize); |
| return 0; |
| } |
| |
| int altera_dump(Altera_desc *desc, const void *buf, size_t bsize) |
| { |
| const struct altera_fpga *fpga = altera_desc_to_fpga(desc, __func__); |
| |
| if (!fpga) |
| return FPGA_FAIL; |
| |
| debug_cond(FPGA_DEBUG, "%s: Launching the %s Reader...\n", |
| __func__, fpga->name); |
| if (fpga->dump) |
| return fpga->dump(desc, buf, bsize); |
| return 0; |
| } |
| |
| int altera_info(Altera_desc *desc) |
| { |
| const struct altera_fpga *fpga = altera_desc_to_fpga(desc, __func__); |
| |
| if (!fpga) |
| return FPGA_FAIL; |
| |
| printf("Family: \t%s\n", fpga->name); |
| |
| printf("Interface type:\t"); |
| switch (desc->iface) { |
| case passive_serial: |
| printf("Passive Serial (PS)\n"); |
| break; |
| case passive_parallel_synchronous: |
| printf("Passive Parallel Synchronous (PPS)\n"); |
| break; |
| case passive_parallel_asynchronous: |
| printf("Passive Parallel Asynchronous (PPA)\n"); |
| break; |
| case passive_serial_asynchronous: |
| printf("Passive Serial Asynchronous (PSA)\n"); |
| break; |
| case altera_jtag_mode: /* Not used */ |
| printf("JTAG Mode\n"); |
| break; |
| case fast_passive_parallel: |
| printf("Fast Passive Parallel (FPP)\n"); |
| break; |
| case fast_passive_parallel_security: |
| printf("Fast Passive Parallel with Security (FPPS)\n"); |
| break; |
| case secure_device_manager_mailbox: |
| puts("Secure Device Manager (SDM) Mailbox\n"); |
| break; |
| /* Add new interface types here */ |
| default: |
| printf("Unsupported interface type, %d\n", desc->iface); |
| } |
| |
| printf("Device Size: \t%zd bytes\n" |
| "Cookie: \t0x%x (%d)\n", |
| desc->size, desc->cookie, desc->cookie); |
| |
| if (desc->iface_fns) { |
| printf("Device Function Table @ 0x%p\n", desc->iface_fns); |
| if (fpga->info) |
| fpga->info(desc); |
| } else { |
| printf("No Device Function Table.\n"); |
| } |
| |
| return FPGA_SUCCESS; |
| } |