| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) Freescale Semiconductor, Inc. 2006-2007 |
| * |
| * Author: Scott Wood <scottwood@freescale.com> |
| */ |
| |
| #include <common.h> |
| #if defined(CONFIG_OF_LIBFDT) |
| #include <linux/libfdt.h> |
| #endif |
| #include <pci.h> |
| #include <mpc83xx.h> |
| #include <vsc7385.h> |
| #include <ns16550.h> |
| #include <nand.h> |
| #if defined(CONFIG_MPC83XX_GPIO) && !defined(CONFIG_SPL_BUILD) |
| #include <asm/gpio.h> |
| #endif |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| int board_early_init_f(void) |
| { |
| #ifndef CONFIG_SYS_8313ERDB_BROKEN_PMC |
| volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; |
| |
| if (im->pmc.pmccr1 & PMCCR1_POWER_OFF) |
| gd->flags |= GD_FLG_SILENT; |
| #endif |
| #if defined(CONFIG_MPC83XX_GPIO) && !defined(CONFIG_SPL_BUILD) |
| mpc83xx_gpio_init_f(); |
| #endif |
| |
| return 0; |
| } |
| |
| int board_early_init_r(void) |
| { |
| #if defined(CONFIG_MPC83XX_GPIO) && !defined(CONFIG_SPL_BUILD) |
| mpc83xx_gpio_init_r(); |
| #endif |
| |
| return 0; |
| } |
| |
| int checkboard(void) |
| { |
| puts("Board: Freescale MPC8313ERDB\n"); |
| return 0; |
| } |
| |
| #ifndef CONFIG_SPL_BUILD |
| static struct pci_region pci_regions[] = { |
| { |
| .bus_start = CONFIG_SYS_PCI1_MEM_BASE, |
| .phys_start = CONFIG_SYS_PCI1_MEM_PHYS, |
| .size = CONFIG_SYS_PCI1_MEM_SIZE, |
| .flags = PCI_REGION_MEM | PCI_REGION_PREFETCH |
| }, |
| { |
| .bus_start = CONFIG_SYS_PCI1_MMIO_BASE, |
| .phys_start = CONFIG_SYS_PCI1_MMIO_PHYS, |
| .size = CONFIG_SYS_PCI1_MMIO_SIZE, |
| .flags = PCI_REGION_MEM |
| }, |
| { |
| .bus_start = CONFIG_SYS_PCI1_IO_BASE, |
| .phys_start = CONFIG_SYS_PCI1_IO_PHYS, |
| .size = CONFIG_SYS_PCI1_IO_SIZE, |
| .flags = PCI_REGION_IO |
| } |
| }; |
| |
| void pci_init_board(void) |
| { |
| volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR; |
| volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk; |
| volatile law83xx_t *pci_law = immr->sysconf.pcilaw; |
| struct pci_region *reg[] = { pci_regions }; |
| |
| /* Enable all 3 PCI_CLK_OUTPUTs. */ |
| clk->occr |= 0xe0000000; |
| |
| /* |
| * Configure PCI Local Access Windows |
| */ |
| pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR; |
| pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB; |
| |
| pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR; |
| pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB; |
| |
| mpc83xx_pci_init(1, reg); |
| } |
| |
| /* |
| * Miscellaneous late-boot configurations |
| * |
| * If a VSC7385 microcode image is present, then upload it. |
| */ |
| int misc_init_r(void) |
| { |
| int rc = 0; |
| |
| #ifdef CONFIG_VSC7385_IMAGE |
| if (vsc7385_upload_firmware((void *) CONFIG_VSC7385_IMAGE, |
| CONFIG_VSC7385_IMAGE_SIZE)) { |
| puts("Failure uploading VSC7385 microcode.\n"); |
| rc = 1; |
| } |
| #endif |
| |
| return rc; |
| } |
| |
| #if defined(CONFIG_OF_BOARD_SETUP) |
| int ft_board_setup(void *blob, bd_t *bd) |
| { |
| ft_cpu_setup(blob, bd); |
| #ifdef CONFIG_PCI |
| ft_pci_setup(blob, bd); |
| #endif |
| |
| return 0; |
| } |
| #endif |
| #else /* CONFIG_SPL_BUILD */ |
| void board_init_f(ulong bootflag) |
| { |
| board_early_init_f(); |
| NS16550_init((NS16550_t)(CONFIG_SYS_IMMR + 0x4500), |
| CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE); |
| puts("NAND boot... "); |
| timer_init(); |
| dram_init(); |
| relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC_SP, (gd_t *)gd, |
| CONFIG_SYS_NAND_U_BOOT_RELOC); |
| } |
| |
| void board_init_r(gd_t *gd, ulong dest_addr) |
| { |
| nand_boot(); |
| } |
| |
| void putc(char c) |
| { |
| if (gd->flags & GD_FLG_SILENT) |
| return; |
| |
| if (c == '\n') |
| NS16550_putc((NS16550_t)(CONFIG_SYS_IMMR + 0x4500), '\r'); |
| |
| NS16550_putc((NS16550_t)(CONFIG_SYS_IMMR + 0x4500), c); |
| } |
| #endif |