| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * (C) Copyright 2013 Philippe Reynes <tremyfr@yahoo.fr> |
| */ |
| |
| #include <config.h> |
| #include <generated/asm-offsets.h> |
| #include <asm/macro.h> |
| #include <asm/arch/imx-regs.h> |
| #include "apf27.h" |
| |
| .macro init_aipi |
| /* |
| * setup AIPI1 and AIPI2 |
| */ |
| write32 AIPI1_PSR0, ACFG_AIPI1_PSR0_VAL |
| write32 AIPI1_PSR1, ACFG_AIPI1_PSR1_VAL |
| write32 AIPI2_PSR0, ACFG_AIPI2_PSR0_VAL |
| write32 AIPI2_PSR1, ACFG_AIPI2_PSR1_VAL |
| |
| /* Change SDRAM signal strengh */ |
| ldr r0, =GPCR |
| ldr r1, =ACFG_GPCR_VAL |
| ldr r5, [r0] |
| orr r5, r5, r1 |
| str r5, [r0] |
| |
| .endm /* init_aipi */ |
| |
| .macro init_clock |
| ldr r0, =CSCR |
| /* disable MPLL/SPLL first */ |
| ldr r1, [r0] |
| bic r1, r1, #(CSCR_MPEN|CSCR_SPEN) |
| str r1, [r0] |
| |
| /* |
| * pll clock initialization predefined in apf27.h |
| */ |
| write32 MPCTL0, ACFG_MPCTL0_VAL |
| write32 SPCTL0, ACFG_SPCTL0_VAL |
| |
| write32 CSCR, ACFG_CSCR_VAL|CSCR_MPLL_RESTART|CSCR_SPLL_RESTART |
| |
| /* |
| * add some delay here |
| */ |
| mov r1, #0x1000 |
| 1: subs r1, r1, #0x1 |
| bne 1b |
| |
| /* peripheral clock divider */ |
| write32 PCDR0, ACFG_PCDR0_VAL |
| write32 PCDR1, ACFG_PCDR1_VAL |
| |
| /* Configure PCCR0 and PCCR1 */ |
| write32 PCCR0, ACFG_PCCR0_VAL |
| write32 PCCR1, ACFG_PCCR1_VAL |
| |
| .endm /* init_clock */ |
| |
| .macro init_ddr |
| /* wait for SDRAM/LPDDR ready (SDRAMRDY) */ |
| ldr r0, =IMX_ESD_BASE |
| ldr r4, =ESDMISC_SDRAM_RDY |
| 2: ldr r1, [r0, #ESDMISC_ROF] |
| ands r1, r1, r4 |
| bpl 2b |
| |
| /* LPDDR Soft Reset Mobile/Low Power DDR SDRAM. */ |
| ldr r0, =IMX_ESD_BASE |
| ldr r4, =ACFG_ESDMISC_VAL |
| orr r1, r4, #ESDMISC_MDDR_DL_RST |
| str r1, [r0, #ESDMISC_ROF] |
| |
| /* Hold for more than 200ns */ |
| ldr r1, =0x10000 |
| 1: subs r1, r1, #0x1 |
| bne 1b |
| |
| str r4, [r0] |
| |
| ldr r0, =IMX_ESD_BASE |
| ldr r1, =ACFG_SDRAM_ESDCFG_REGISTER_VAL |
| str r1, [r0, #ESDCFG0_ROF] |
| |
| ldr r0, =IMX_ESD_BASE |
| ldr r1, =ACFG_PRECHARGE_CMD |
| str r1, [r0, #ESDCTL0_ROF] |
| |
| /* write8(0xA0001000, any value) */ |
| ldr r1, =PHYS_SDRAM_1+ACFG_SDRAM_PRECHARGE_ALL_VAL |
| strb r2, [r1] |
| |
| ldr r1, =ACFG_AUTOREFRESH_CMD |
| str r1, [r0, #ESDCTL0_ROF] |
| |
| ldr r4, =PHYS_SDRAM_1 /* CSD0 base address */ |
| |
| ldr r6,=0x7 /* load loop counter */ |
| 1: str r5,[r4] /* run auto-refresh cycle to array 0 */ |
| subs r6,r6,#1 |
| bne 1b |
| |
| ldr r1, =ACFG_SET_MODE_REG_CMD |
| str r1, [r0, #ESDCTL0_ROF] |
| |
| /* set standard mode register */ |
| ldr r4, = PHYS_SDRAM_1+ACFG_SDRAM_MODE_REGISTER_VAL |
| strb r2, [r4] |
| |
| /* set extended mode register */ |
| ldr r4, =PHYS_SDRAM_1+ACFG_SDRAM_EXT_MODE_REGISTER_VAL |
| strb r5, [r4] |
| |
| ldr r1, =ACFG_NORMAL_RW_CMD |
| str r1, [r0, #ESDCTL0_ROF] |
| |
| /* 2nd sdram */ |
| ldr r0, =IMX_ESD_BASE |
| ldr r1, =ACFG_SDRAM_ESDCFG_REGISTER_VAL |
| str r1, [r0, #ESDCFG1_ROF] |
| |
| ldr r0, =IMX_ESD_BASE |
| ldr r1, =ACFG_PRECHARGE_CMD |
| str r1, [r0, #ESDCTL1_ROF] |
| |
| /* write8(0xB0001000, any value) */ |
| ldr r1, =PHYS_SDRAM_2+ACFG_SDRAM_PRECHARGE_ALL_VAL |
| strb r2, [r1] |
| |
| ldr r1, =ACFG_AUTOREFRESH_CMD |
| str r1, [r0, #ESDCTL1_ROF] |
| |
| ldr r4, =PHYS_SDRAM_2 /* CSD1 base address */ |
| |
| ldr r6,=0x7 /* load loop counter */ |
| 1: str r5,[r4] /* run auto-refresh cycle to array 0 */ |
| subs r6,r6,#1 |
| bne 1b |
| |
| ldr r1, =ACFG_SET_MODE_REG_CMD |
| str r1, [r0, #ESDCTL1_ROF] |
| |
| /* set standard mode register */ |
| ldr r4, =PHYS_SDRAM_2+ACFG_SDRAM_MODE_REGISTER_VAL |
| strb r2, [r4] |
| |
| /* set extended mode register */ |
| ldr r4, =PHYS_SDRAM_2+ACFG_SDRAM_EXT_MODE_REGISTER_VAL |
| strb r2, [r4] |
| |
| ldr r1, =ACFG_NORMAL_RW_CMD |
| str r1, [r0, #ESDCTL1_ROF] |
| .endm /* init_ddr */ |
| |
| .globl lowlevel_init |
| lowlevel_init: |
| |
| init_aipi |
| init_clock |
| #ifdef CONFIG_SPL_BUILD |
| init_ddr |
| #endif |
| |
| mov pc, lr |
