blob: 0a4f30fbaf4d0cc1eb1765d35b154a98ecdde448 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2018-2019 Toradex AG
*
* Configuration settings for the Colibri iMX6ULL module.
*
* based on colibri_imx7.h
*/
#ifndef __COLIBRI_IMX6ULL_CONFIG_H
#define __COLIBRI_IMX6ULL_CONFIG_H
#include "mx6_common.h"
#define CONFIG_IOMUX_LPSR
#define PHYS_SDRAM_SIZE SZ_512M
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M)
/* Network */
#define CONFIG_TFTP_TSIZE
/* ENET1 */
#define IMX_FEC_BASE ENET2_BASE_ADDR
/* MMC Config */
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SYS_FSL_USDHC_NUM 1
/* I2C configs */
#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_IPADDR 192.168.10.2
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_SERVERIP 192.168.10.1
#define FDT_FILE "imx6ull-colibri${variant}-${fdt_board}.dtb"
#define MEM_LAYOUT_ENV_SETTINGS \
"bootm_size=0x10000000\0" \
"fdt_addr_r=0x82100000\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"kernel_addr_r=0x81000000\0" \
"pxefile_addr_r=0x87100000\0" \
"ramdisk_addr_r=0x82200000\0" \
"scriptaddr=0x87000000\0"
#define NFS_BOOTCMD \
"nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
"nfsboot=run setup; " \
"setenv bootargs ${defargs} ${nfsargs} " \
"${setupargs} ${vidargs}; echo Booting from NFS...;" \
"dhcp ${kernel_addr_r} && " \
"tftp ${fdt_addr_r} " FDT_FILE " && " \
"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
#define SD_BOOTCMD \
"set_sdargs=setenv sdargs root=PARTUUID=${uuid} ro rootwait\0" \
"sdboot=run setup; run sdfinduuid; run set_sdargs; " \
"setenv bootargs ${defargs} ${sdargs} " \
"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
"load mmc ${sddev}:${sdbootpart} ${kernel_addr_r} ${kernel_file} && " \
"load mmc ${sddev}:${sdbootpart} ${fdt_addr_r} " FDT_FILE " && " \
"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
"sdbootpart=1\0" \
"sddev=0\0" \
"sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
"sdrootpart=2\0"
#define UBI_BOOTCMD \
"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rw rootfstype=ubifs " \
"ubi.fm_autoconvert=1\0" \
"ubiboot=run setup; " \
"setenv bootargs ${defargs} ${ubiargs} " \
"${setupargs} ${vidargs}; echo Booting from NAND...; " \
"ubi part ubi &&" \
"ubi read ${kernel_addr_r} kernel && " \
"ubi read ${fdt_addr_r} dtb && " \
"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
#define CONFIG_BOOTCOMMAND "run ubiboot; " \
"setenv fdtfile " FDT_FILE " && run distro_bootcmd;"
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
func(USB, usb, 0) \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
#define DFU_ALT_NAND_INFO "imx6ull-bcb part 0,1;u-boot1 part 0,2;u-boot2 part 0,3;u-boot-env part 0,4;ubi partubi 0,5"
#define CONFIG_EXTRA_ENV_SETTINGS \
BOOTENV \
MEM_LAYOUT_ENV_SETTINGS \
NFS_BOOTCMD \
SD_BOOTCMD \
UBI_BOOTCMD \
"console=ttymxc0\0" \
"defargs=user_debug=30\0" \
"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
"fdt_board=eval-v3\0" \
"fdt_fixup=;\0" \
"ip_dyn=yes\0" \
"kernel_file=zImage\0" \
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
"${board}/flash_eth.img && source ${loadaddr}\0" \
"setsdupdate=mmc rescan && setenv interface mmc && " \
"fatload ${interface} 0:1 ${loadaddr} " \
"${board}/flash_blk.img && source ${loadaddr}\0" \
"setup=setenv setupargs " \
"console=tty1 console=${console}" \
",${baudrate}n8 ${memargs} consoleblank=0\0" \
"setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
"setusbupdate=usb start && setenv interface usb && " \
"fatload ${interface} 0:1 ${loadaddr} " \
"${board}/flash_blk.img && source ${loadaddr}\0" \
"splashpos=m,m\0" \
"videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \
"vidargs=video=mxsfb:640x480M-16@60"
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x08000000)
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
/* Physical Memory Map */
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
#if defined(CONFIG_ENV_IS_IN_NAND)
#define CONFIG_ENV_SECT_SIZE (128 * 1024)
#define CONFIG_ENV_OFFSET (28 * CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
#endif
/* NAND stuff */
#define CONFIG_SYS_MAX_NAND_DEVICE 1
/* used to initialize CONFIG_SYS_NAND_BASE_LIST which is unused */
#define CONFIG_SYS_NAND_BASE -1
#define CONFIG_SYS_NAND_ONFI_DETECTION
/* USB Configs */
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_IMX_THERMAL
#define CONFIG_USBD_HS
/* USB Device Firmware Update support */
#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
#define DFU_DEFAULT_POLL_TIMEOUT 300
#if defined(CONFIG_VIDEO) || defined(CONFIG_DM_VIDEO)
#define CONFIG_VIDEO_MXS
#define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
#define CONFIG_VIDEO_LOGO
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_LOGO
#endif
#endif /* __COLIBRI_IMX6ULL_CONFIG_H */