| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * (C) Copyright 2013 |
| * Texas Instruments Incorporated. |
| * Sricharan R <r.sricharan@ti.com> |
| * |
| * Derived from OMAP4 done by: |
| * Aneesh V <aneesh@ti.com> |
| * |
| * TI OMAP5 AND DRA7XX common configuration settings |
| * |
| * For more details, please see the technical documents listed at |
| * http://www.ti.com/product/omap5432 |
| */ |
| |
| #ifndef __CONFIG_TI_OMAP5_COMMON_H |
| #define __CONFIG_TI_OMAP5_COMMON_H |
| |
| /* Use General purpose timer 1 */ |
| #define CONFIG_SYS_TIMERBASE GPT2_BASE |
| |
| /* |
| * For the DDR timing information we can either dynamically determine |
| * the timings to use or use pre-determined timings (based on using the |
| * dynamic method. Default to the static timing infomation. |
| */ |
| #define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS |
| #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS |
| #define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION |
| #define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS |
| #endif |
| |
| #define CONFIG_PALMAS_POWER |
| |
| #include <asm/arch/cpu.h> |
| #include <asm/arch/omap.h> |
| |
| #include <configs/ti_armv7_omap.h> |
| |
| /* |
| * Hardware drivers |
| */ |
| #define CONFIG_SYS_NS16550_CLK 48000000 |
| #if !defined(CONFIG_DM_SERIAL) |
| #define CONFIG_SYS_NS16550_SERIAL |
| #define CONFIG_SYS_NS16550_REG_SIZE (-4) |
| #endif |
| |
| /* |
| * Environment setup |
| */ |
| |
| #ifndef DFUARGS |
| #define DFUARGS |
| #endif |
| |
| #include <environment/ti/boot.h> |
| #include <environment/ti/mmc.h> |
| #include <environment/ti/nand.h> |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| DEFAULT_LINUX_BOOT_ENV \ |
| DEFAULT_MMC_TI_ARGS \ |
| DEFAULT_FIT_TI_ARGS \ |
| DEFAULT_COMMON_BOOT_TI_ARGS \ |
| DEFAULT_FDT_TI_ARGS \ |
| DFUARGS \ |
| NETARGS \ |
| NANDARGS \ |
| |
| /* |
| * SPL related defines. The Public RAM memory map the ROM defines the |
| * area between 0x40300000 and 0x4031E000 as a download area for OMAP5. |
| * On DRA7xx/AM57XX the download area is between 0x40300000 and 0x4037E000. |
| * We set CONFIG_SPL_DISPLAY_PRINT to have omap_rev_string() called and |
| * print some information. |
| */ |
| #ifdef CONFIG_TI_SECURE_DEVICE |
| /* |
| * For memory booting on HS parts, the first 4KB of the internal RAM is |
| * reserved for secure world use and the flash loader image is |
| * preceded by a secure certificate. The SPL will therefore run in internal |
| * RAM from address 0x40301350 (0x40300000+0x1000(reserved)+0x350(cert)). |
| */ |
| #define TI_OMAP5_SECURE_BOOT_RESV_SRAM_SZ 0x1000 |
| /* If no specific start address is specified then the secure EMIF |
| * region will be placed at the end of the DDR space. In order to prevent |
| * the main u-boot relocation from clobbering that memory and causing a |
| * firewall violation, we tell u-boot that memory is protected RAM (PRAM) |
| */ |
| #if (CONFIG_TI_SECURE_EMIF_REGION_START == 0) |
| #define CONFIG_PRAM (CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE) >> 10 |
| #endif |
| #else |
| /* |
| * For all booting on GP parts, the flash loader image is |
| * downloaded into internal RAM at address 0x40300000. |
| */ |
| #endif |
| |
| #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ |
| (128 << 20)) |
| #ifdef CONFIG_SPL_BUILD |
| #undef CONFIG_TIMER |
| #endif |
| |
| #endif /* __CONFIG_TI_OMAP5_COMMON_H */ |
