| /* |
| * Copyright 2015 Sutajio Ko-Usagi PTE LTD |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This file is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public |
| * License along with this file; if not, write to the Free |
| * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, |
| * MA 02110-1301 USA |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| * |
| */ |
| |
| /dts-v1/; |
| #include "imx6q.dtsi" |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| |
| / { |
| model = "Kosagi Novena Dual/Quad"; |
| compatible = "kosagi,imx6q-novena", "fsl,imx6q"; |
| |
| /* Will be filled by the bootloader */ |
| memory@10000000 { |
| device_type = "memory"; |
| reg = <0x10000000 0>; |
| }; |
| |
| aliases { |
| mmc0 = &usdhc3; |
| mmc1 = &usdhc2; |
| }; |
| |
| chosen { |
| stdout-path = &uart2; |
| }; |
| |
| backlight: backlight { |
| compatible = "pwm-backlight"; |
| pwms = <&pwm1 0 10000000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_backlight_novena>; |
| power-supply = <®_lvds_lcd>; |
| brightness-levels = <0 3 6 12 16 24 32 48 64 96 128 192 255>; |
| default-brightness-level = <12>; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpio_keys_novena>; |
| |
| user-button { |
| label = "User Button"; |
| gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_POWER>; |
| }; |
| |
| lid { |
| label = "Lid"; |
| gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; |
| linux,input-type = <5>; /* EV_SW */ |
| linux,code = <0>; /* SW_LID */ |
| }; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_leds_novena>; |
| |
| heartbeat { |
| label = "novena:white:panel"; |
| gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "default-on"; |
| }; |
| }; |
| |
| panel: panel { |
| compatible = "innolux,n133hse-ea1", "simple-panel"; |
| backlight = <&backlight>; |
| }; |
| |
| reg_2p5v: regulator-2p5v { |
| compatible = "regulator-fixed"; |
| regulator-name = "2P5V"; |
| regulator-min-microvolt = <2500000>; |
| regulator-max-microvolt = <2500000>; |
| regulator-always-on; |
| }; |
| |
| reg_3p3v: regulator-3p3v { |
| compatible = "regulator-fixed"; |
| regulator-name = "3P3V"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| reg_audio_codec: regulator-audio-codec { |
| compatible = "regulator-fixed"; |
| regulator-name = "es8328-power"; |
| regulator-boot-on; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| startup-delay-us = <400000>; |
| gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_display: regulator-display { |
| compatible = "regulator-fixed"; |
| regulator-name = "lcd-display-power"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| startup-delay-us = <200000>; |
| gpio = <&gpio5 28 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_lvds_lcd: regulator-lvds-lcd { |
| compatible = "regulator-fixed"; |
| regulator-name = "lcd-lvds-power"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_pcie: regulator-pcie { |
| compatible = "regulator-fixed"; |
| regulator-name = "pcie-bus-power"; |
| regulator-min-microvolt = <1500000>; |
| regulator-max-microvolt = <1500000>; |
| gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_sata: regulator-sata { |
| compatible = "regulator-fixed"; |
| regulator-name = "sata-power"; |
| regulator-boot-on; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| startup-delay-us = <10000>; |
| gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_usb_otg_vbus: regulator-usb-otg-vbus { |
| compatible = "regulator-fixed"; |
| regulator-name = "usb_otg_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| enable-active-high; |
| }; |
| |
| sound { |
| compatible = "fsl,imx-audio-es8328"; |
| model = "imx-audio-es8328"; |
| ssi-controller = <&ssi1>; |
| audio-codec = <&codec>; |
| audio-amp-supply = <®_audio_codec>; |
| jack-gpio = <&gpio5 15 GPIO_ACTIVE_HIGH>; |
| audio-routing = |
| "Speaker", "LOUT2", |
| "Speaker", "ROUT2", |
| "Speaker", "audio-amp", |
| "Headphone", "ROUT1", |
| "Headphone", "LOUT1", |
| "LINPUT1", "Mic Jack", |
| "RINPUT1", "Mic Jack", |
| "Mic Jack", "Mic Bias"; |
| mux-int-port = <0x1>; |
| mux-ext-port = <0x3>; |
| }; |
| }; |
| |
| &audmux { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_audmux_novena>; |
| status = "okay"; |
| }; |
| |
| &ecspi3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi3_novena>; |
| status = "okay"; |
| }; |
| |
| &fec { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet_novena>; |
| phy-mode = "rgmii"; |
| phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; |
| rxc-skew-ps = <3000>; |
| rxdv-skew-ps = <0>; |
| txc-skew-ps = <3000>; |
| txen-skew-ps = <0>; |
| rxd0-skew-ps = <0>; |
| rxd1-skew-ps = <0>; |
| rxd2-skew-ps = <0>; |
| rxd3-skew-ps = <0>; |
| txd0-skew-ps = <3000>; |
| txd1-skew-ps = <3000>; |
| txd2-skew-ps = <3000>; |
| txd3-skew-ps = <3000>; |
| status = "okay"; |
| }; |
| |
| &hdmi { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hdmi_novena>; |
| ddc-i2c-bus = <&i2c2>; |
| status = "okay"; |
| }; |
| |
| &i2c1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1_novena>; |
| status = "okay"; |
| |
| accel: mma8452@1c { |
| compatible = "fsl,mma8452"; |
| reg = <0x1c>; |
| }; |
| |
| rtc: pcf8523@68 { |
| compatible = "nxp,pcf8523"; |
| reg = <0x68>; |
| }; |
| |
| sbs_battery: bq20z75@b { |
| compatible = "sbs,sbs-battery"; |
| reg = <0x0b>; |
| sbs,i2c-retry-count = <50>; |
| }; |
| |
| touch: stmpe811@44 { |
| compatible = "st,stmpe811"; |
| reg = <0x44>; |
| irq-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>; |
| id = <0>; |
| blocks = <0x5>; |
| irq-trigger = <0x1>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_stmpe_novena>; |
| vio-supply = <®_3p3v>; |
| vcc-supply = <®_3p3v>; |
| |
| stmpe_touchscreen { |
| compatible = "st,stmpe-ts"; |
| st,sample-time = <4>; |
| st,mod-12b = <1>; |
| st,ref-sel = <0>; |
| st,adc-freq = <1>; |
| st,ave-ctrl = <1>; |
| st,touch-det-delay = <2>; |
| st,settling = <2>; |
| st,fraction-z = <7>; |
| st,i-drive = <1>; |
| }; |
| }; |
| }; |
| |
| &i2c2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c2_novena>; |
| status = "okay"; |
| |
| pmic: pfuze100@8 { |
| compatible = "fsl,pfuze100"; |
| reg = <0x08>; |
| |
| regulators { |
| reg_sw1a: sw1a { |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <1875000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <6250>; |
| }; |
| |
| reg_sw1c: sw1c { |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <1875000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| reg_sw2: sw2 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| reg_sw3a: sw3a { |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <1975000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| reg_sw3b: sw3b { |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <1975000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| reg_sw4: sw4 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| reg_swbst: swbst { |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5150000>; |
| regulator-boot-on; |
| }; |
| |
| reg_snvs: vsnvs { |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <3000000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| reg_vref: vrefddr { |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| reg_vgen1: vgen1 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1550000>; |
| }; |
| |
| reg_vgen2: vgen2 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1550000>; |
| }; |
| |
| reg_vgen3: vgen3 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| reg_vgen4: vgen4 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| reg_vgen5: vgen5 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| reg_vgen6: vgen6 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c3_novena>; |
| status = "okay"; |
| |
| codec: es8328@11 { |
| compatible = "everest,es8328"; |
| reg = <0x11>; |
| DVDD-supply = <®_audio_codec>; |
| AVDD-supply = <®_audio_codec>; |
| PVDD-supply = <®_audio_codec>; |
| HPVDD-supply = <®_audio_codec>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sound_novena>; |
| clocks = <&clks IMX6QDL_CLK_CKO1>; |
| assigned-clocks = <&clks IMX6QDL_CLK_CKO>, |
| <&clks IMX6QDL_CLK_CKO1_SEL>, |
| <&clks IMX6QDL_CLK_PLL4_AUDIO>, |
| <&clks IMX6QDL_CLK_CKO1>; |
| assigned-clock-parents = <&clks IMX6QDL_CLK_CKO1>, |
| <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>, |
| <&clks IMX6QDL_CLK_OSC>, |
| <&clks IMX6QDL_CLK_CKO1_PODF>; |
| assigned-clock-rates = <0 0 722534400 22579200>; |
| }; |
| }; |
| |
| &kpp { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_kpp_novena>; |
| linux,keymap = < |
| MATRIX_KEY(1, 1, KEY_CONFIG) |
| >; |
| status = "okay"; |
| }; |
| |
| &ldb { |
| fsl,dual-channel; |
| status = "okay"; |
| |
| lvds-channel@0 { |
| fsl,data-mapping = "jeida"; |
| fsl,data-width = <24>; |
| fsl,panel = <&panel>; |
| status = "okay"; |
| }; |
| }; |
| |
| &pcie { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pcie_novena>; |
| reset-gpio = <&gpio3 29 GPIO_ACTIVE_LOW>; |
| vpcie-supply = <®_pcie>; |
| status = "okay"; |
| }; |
| |
| &pwm1 { |
| status = "okay"; |
| }; |
| |
| &sata { |
| target-supply = <®_sata>; |
| fsl,transmit-level-mV = <1025>; |
| fsl,transmit-boost-mdB = <0>; |
| fsl,transmit-atten-16ths = <8>; |
| status = "okay"; |
| }; |
| |
| &ssi1 { |
| status = "okay"; |
| }; |
| |
| &uart2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart2_novena>; |
| status = "okay"; |
| }; |
| |
| &uart3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart3_novena>; |
| status = "okay"; |
| }; |
| |
| &uart4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart4_novena>; |
| status = "okay"; |
| }; |
| |
| &usbotg { |
| vbus-supply = <®_usb_otg_vbus>; |
| dr_mode = "otg"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbotg_novena>; |
| disable-over-current; |
| status = "okay"; |
| }; |
| |
| &usbh1 { |
| vbus-supply = <®_swbst>; |
| status = "okay"; |
| }; |
| |
| &usdhc2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc2_novena>; |
| cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; |
| wp-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; |
| bus-width = <4>; |
| status = "okay"; |
| }; |
| |
| &usdhc3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc3_novena>; |
| bus-width = <4>; |
| non-removable; |
| status = "okay"; |
| }; |
| |
| &iomuxc { |
| pinctrl_audmux_novena: audmuxgrp-novena { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 |
| MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 |
| MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 |
| MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 |
| >; |
| }; |
| |
| pinctrl_backlight_novena: backlightgrp-novena { |
| fsl,pins = < |
| MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28 0x1b0b1 |
| MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_ecspi3_novena: ecspi3grp-novena { |
| fsl,pins = < |
| MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 |
| MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 |
| MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 |
| >; |
| }; |
| |
| pinctrl_enet_novena: enetgrp-novena { |
| fsl,pins = < |
| MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 |
| MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 |
| MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b020 |
| MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b028 |
| MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b028 |
| MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b028 |
| MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b028 |
| MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b028 |
| MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 |
| MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 |
| MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 |
| MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 |
| MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 |
| MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 |
| MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 |
| MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 |
| /* Ethernet reset */ |
| MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_fpga_gpio: fpgagpiogrp-novena { |
| fsl,pins = < |
| /* FPGA power */ |
| MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b1 |
| /* Reset */ |
| MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07 0x1b0b1 |
| /* FPGA GPIOs */ |
| MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x1b0b1 |
| MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x1b0b1 |
| MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x1b0b1 |
| MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x1b0b1 |
| MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b0b1 |
| MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b1 |
| MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x1b0b1 |
| MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x1b0b1 |
| MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x1b0b1 |
| MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x1b0b1 |
| MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x1b0b1 |
| MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x1b0b1 |
| MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x1b0b1 |
| MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b1 |
| MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x1b0b1 |
| MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x1b0b1 |
| MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b1 |
| MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b1 |
| MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b1 |
| MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b1 |
| MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b1 |
| MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b1 |
| MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x1b0b1 |
| MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1b0b1 |
| MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1b0b1 |
| MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_fpga_eim: fpgaeimgrp-novena { |
| fsl,pins = < |
| /* FPGA power */ |
| MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b1 |
| /* Reset */ |
| MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07 0x1b0b1 |
| /* FPGA GPIOs */ |
| MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0f1 |
| MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0f1 |
| MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0f1 |
| MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0f1 |
| MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0f1 |
| MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0f1 |
| MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0f1 |
| MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0f1 |
| MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0f1 |
| MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0f1 |
| MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0f1 |
| MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0f1 |
| MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0f1 |
| MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0f1 |
| MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0f1 |
| MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0f1 |
| MX6QDL_PAD_EIM_A16__EIM_ADDR16 0xb0f1 |
| MX6QDL_PAD_EIM_A17__EIM_ADDR17 0xb0f1 |
| MX6QDL_PAD_EIM_A18__EIM_ADDR18 0xb0f1 |
| MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0f1 |
| MX6QDL_PAD_EIM_CS1__EIM_CS1_B 0xb0f1 |
| MX6QDL_PAD_EIM_LBA__EIM_LBA_B 0xb0f1 |
| MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0f1 |
| MX6QDL_PAD_EIM_RW__EIM_RW 0xb0f1 |
| MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0xb0f1 |
| MX6QDL_PAD_EIM_BCLK__EIM_BCLK 0xb0f1 |
| >; |
| }; |
| |
| pinctrl_gpio_keys_novena: gpiokeysgrp-novena { |
| fsl,pins = < |
| /* User button */ |
| MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 |
| /* PCIe Wakeup */ |
| MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1f0e0 |
| /* Lid switch */ |
| MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_hdmi_novena: hdmigrp-novena { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 |
| MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_i2c1_novena: i2c1grp-novena { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 |
| MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c2_novena: i2c2grp-novena { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 |
| MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c3_novena: i2c3grp-novena { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 |
| MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_kpp_novena: kppgrp-novena { |
| fsl,pins = < |
| /* Front panel button */ |
| MX6QDL_PAD_KEY_ROW1__KEY_ROW1 0x1b0b1 |
| /* Fake column driver, not connected */ |
| MX6QDL_PAD_KEY_COL1__KEY_COL1 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_leds_novena: ledsgrp-novena { |
| fsl,pins = < |
| MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_pcie_novena: pciegrp-novena { |
| fsl,pins = < |
| /* Reset */ |
| MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b1 |
| /* Power On */ |
| MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b1 |
| /* Wifi kill */ |
| MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_sata_novena: satagrp-novena { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_senoko_novena: senokogrp-novena { |
| fsl,pins = < |
| /* Senoko IRQ line */ |
| MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x13048 |
| /* Senoko reset line */ |
| MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_sound_novena: soundgrp-novena { |
| fsl,pins = < |
| /* Audio power regulator */ |
| MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b1 |
| /* Headphone plug */ |
| MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b1 |
| MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 |
| >; |
| }; |
| |
| pinctrl_stmpe_novena: stmpegrp-novena { |
| fsl,pins = < |
| /* Touchscreen interrupt */ |
| MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_uart2_novena: uart2grp-novena { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_uart3_novena: uart3grp-novena { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_uart4_novena: uart4grp-novena { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_usbotg_novena: usbotggrp-novena { |
| fsl,pins = < |
| MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 |
| >; |
| }; |
| |
| pinctrl_usdhc2_novena: usdhc2grp-novena { |
| fsl,pins = < |
| MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9 |
| MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9 |
| MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 |
| MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 |
| MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 |
| MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 |
| /* Write protect */ |
| MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1 |
| /* Card detect */ |
| MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_usdhc3_novena: usdhc3grp-novena { |
| fsl,pins = < |
| MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 |
| MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 |
| MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 |
| MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 |
| MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 |
| MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 |
| >; |
| }; |
| }; |