| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2015 Miao Yan <yanmiaobest@gmail.com> |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <env.h> |
| #include <errno.h> |
| #include <qfw.h> |
| |
| /* |
| * This function prepares kernel for zboot. It loads kernel data |
| * to 'load_addr', initrd to 'initrd_addr' and kernel command |
| * line using qemu fw_cfg interface. |
| */ |
| static int qemu_fwcfg_setup_kernel(void *load_addr, void *initrd_addr) |
| { |
| char *data_addr; |
| uint32_t setup_size, kernel_size, cmdline_size, initrd_size; |
| |
| qemu_fwcfg_read_entry(FW_CFG_SETUP_SIZE, 4, &setup_size); |
| qemu_fwcfg_read_entry(FW_CFG_KERNEL_SIZE, 4, &kernel_size); |
| |
| if (setup_size == 0 || kernel_size == 0) { |
| printf("warning: no kernel available\n"); |
| return -1; |
| } |
| |
| data_addr = load_addr; |
| qemu_fwcfg_read_entry(FW_CFG_SETUP_DATA, |
| le32_to_cpu(setup_size), data_addr); |
| data_addr += le32_to_cpu(setup_size); |
| |
| qemu_fwcfg_read_entry(FW_CFG_KERNEL_DATA, |
| le32_to_cpu(kernel_size), data_addr); |
| data_addr += le32_to_cpu(kernel_size); |
| |
| data_addr = initrd_addr; |
| qemu_fwcfg_read_entry(FW_CFG_INITRD_SIZE, 4, &initrd_size); |
| if (initrd_size == 0) { |
| printf("warning: no initrd available\n"); |
| } else { |
| qemu_fwcfg_read_entry(FW_CFG_INITRD_DATA, |
| le32_to_cpu(initrd_size), data_addr); |
| data_addr += le32_to_cpu(initrd_size); |
| } |
| |
| qemu_fwcfg_read_entry(FW_CFG_CMDLINE_SIZE, 4, &cmdline_size); |
| if (cmdline_size) { |
| qemu_fwcfg_read_entry(FW_CFG_CMDLINE_DATA, |
| le32_to_cpu(cmdline_size), data_addr); |
| /* |
| * if kernel cmdline only contains '\0', (e.g. no -append |
| * when invoking qemu), do not update bootargs |
| */ |
| if (*data_addr != '\0') { |
| if (env_set("bootargs", data_addr) < 0) |
| printf("warning: unable to change bootargs\n"); |
| } |
| } |
| |
| printf("loading kernel to address %p size %x", load_addr, |
| le32_to_cpu(kernel_size)); |
| if (initrd_size) |
| printf(" initrd %p size %x\n", |
| initrd_addr, |
| le32_to_cpu(initrd_size)); |
| else |
| printf("\n"); |
| |
| return 0; |
| } |
| |
| static int qemu_fwcfg_list_firmware(void) |
| { |
| int ret; |
| struct fw_cfg_file_iter iter; |
| struct fw_file *file; |
| |
| /* make sure fw_list is loaded */ |
| ret = qemu_fwcfg_read_firmware_list(); |
| if (ret) |
| return ret; |
| |
| |
| for (file = qemu_fwcfg_file_iter_init(&iter); |
| !qemu_fwcfg_file_iter_end(&iter); |
| file = qemu_fwcfg_file_iter_next(&iter)) { |
| printf("%-56s\n", file->cfg.name); |
| } |
| |
| return 0; |
| } |
| |
| static int qemu_fwcfg_do_list(cmd_tbl_t *cmdtp, int flag, |
| int argc, char * const argv[]) |
| { |
| if (qemu_fwcfg_list_firmware() < 0) |
| return CMD_RET_FAILURE; |
| |
| return 0; |
| } |
| |
| static int qemu_fwcfg_do_cpus(cmd_tbl_t *cmdtp, int flag, |
| int argc, char * const argv[]) |
| { |
| int ret = qemu_fwcfg_online_cpus(); |
| if (ret < 0) { |
| printf("QEMU fw_cfg interface not found\n"); |
| return CMD_RET_FAILURE; |
| } |
| |
| printf("%d cpu(s) online\n", qemu_fwcfg_online_cpus()); |
| |
| return 0; |
| } |
| |
| static int qemu_fwcfg_do_load(cmd_tbl_t *cmdtp, int flag, |
| int argc, char * const argv[]) |
| { |
| char *env; |
| void *load_addr; |
| void *initrd_addr; |
| |
| env = env_get("loadaddr"); |
| load_addr = env ? |
| (void *)simple_strtoul(env, NULL, 16) : |
| #ifdef CONFIG_LOADADDR |
| (void *)CONFIG_LOADADDR; |
| #else |
| NULL; |
| #endif |
| |
| env = env_get("ramdiskaddr"); |
| initrd_addr = env ? |
| (void *)simple_strtoul(env, NULL, 16) : |
| #ifdef CONFIG_RAMDISK_ADDR |
| (void *)CONFIG_RAMDISK_ADDR; |
| #else |
| NULL; |
| #endif |
| |
| if (argc == 2) { |
| load_addr = (void *)simple_strtoul(argv[0], NULL, 16); |
| initrd_addr = (void *)simple_strtoul(argv[1], NULL, 16); |
| } else if (argc == 1) { |
| load_addr = (void *)simple_strtoul(argv[0], NULL, 16); |
| } |
| |
| if (!load_addr || !initrd_addr) { |
| printf("missing load or initrd address\n"); |
| return CMD_RET_FAILURE; |
| } |
| |
| return qemu_fwcfg_setup_kernel(load_addr, initrd_addr); |
| } |
| |
| static cmd_tbl_t fwcfg_commands[] = { |
| U_BOOT_CMD_MKENT(list, 0, 1, qemu_fwcfg_do_list, "", ""), |
| U_BOOT_CMD_MKENT(cpus, 0, 1, qemu_fwcfg_do_cpus, "", ""), |
| U_BOOT_CMD_MKENT(load, 2, 1, qemu_fwcfg_do_load, "", ""), |
| }; |
| |
| static int do_qemu_fw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| int ret; |
| cmd_tbl_t *fwcfg_cmd; |
| |
| if (!qemu_fwcfg_present()) { |
| printf("QEMU fw_cfg interface not found\n"); |
| return CMD_RET_USAGE; |
| } |
| |
| fwcfg_cmd = find_cmd_tbl(argv[1], fwcfg_commands, |
| ARRAY_SIZE(fwcfg_commands)); |
| argc -= 2; |
| argv += 2; |
| if (!fwcfg_cmd || argc > fwcfg_cmd->maxargs) |
| return CMD_RET_USAGE; |
| |
| ret = fwcfg_cmd->cmd(fwcfg_cmd, flag, argc, argv); |
| |
| return cmd_process_error(fwcfg_cmd, ret); |
| } |
| |
| U_BOOT_CMD( |
| qfw, 4, 1, do_qemu_fw, |
| "QEMU firmware interface", |
| "<command>\n" |
| " - list : print firmware(s) currently loaded\n" |
| " - cpus : print online cpu number\n" |
| " - load <kernel addr> <initrd addr> : load kernel and initrd (if any), and setup for zboot\n" |
| ) |