| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * mux.c |
| * |
| * Copyright (C) 2013 Lars Poeschel, Lemonage Software GmbH |
| * Copyright (C) 2019 DENX Software Engineering GmbH |
| */ |
| |
| #include <common.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/arch/hardware.h> |
| #include <asm/arch/mux.h> |
| #include <asm/io.h> |
| #include "board.h" |
| |
| static struct module_pin_mux uart0_pin_mux[] = { |
| {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */ |
| {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */ |
| {-1}, |
| }; |
| |
| #ifdef CONFIG_MMC |
| static struct module_pin_mux mmc0_pin_mux[] = { |
| {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ |
| {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ |
| {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */ |
| {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */ |
| {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */ |
| {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */ |
| {OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUP_EN)}, /* MMC0_CD */ |
| {-1}, |
| }; |
| #endif |
| |
| static struct module_pin_mux i2c0_pin_mux[] = { |
| {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | |
| PULLUDEN | SLEWCTRL)}, /* I2C_DATA */ |
| {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | |
| PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */ |
| {-1}, |
| }; |
| |
| #ifdef CONFIG_SPI |
| static struct module_pin_mux spi0_pin_mux[] = { |
| {OFFSET(spi0_sclk), (MODE(0) | RXACTIVE | PULLUDEN)}, /* SPI0_SCLK */ |
| {OFFSET(spi0_d0), (MODE(0) | RXACTIVE | |
| PULLUDEN | PULLUP_EN)}, /* SPI0_D0 */ |
| {OFFSET(spi0_d1), (MODE(0) | RXACTIVE | PULLUDEN)}, /* SPI0_D1 */ |
| {OFFSET(spi0_cs0), (MODE(0) | RXACTIVE | |
| PULLUDEN | PULLUP_EN)}, /* SPI0_CS0 */ |
| {-1}, |
| }; |
| #endif |
| |
| static struct module_pin_mux rmii1_pin_mux[] = { |
| {OFFSET(mii1_crs), MODE(1) | RXACTIVE}, /* RMII1_CRS */ |
| {OFFSET(mii1_rxerr), MODE(1) | RXACTIVE}, /* RMII1_RXERR */ |
| {OFFSET(mii1_txen), MODE(1)}, /* RMII1_TXEN */ |
| {OFFSET(mii1_txd1), MODE(1)}, /* RMII1_TXD1 */ |
| {OFFSET(mii1_txd0), MODE(1)}, /* RMII1_TXD0 */ |
| {OFFSET(mii1_rxd1), MODE(1) | RXACTIVE}, /* RMII1_RXD1 */ |
| {OFFSET(mii1_rxd0), MODE(1) | RXACTIVE}, /* RMII1_RXD0 */ |
| {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */ |
| {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ |
| {OFFSET(rmii1_refclk), MODE(0) | RXACTIVE}, /* RMII1_REFCLK */ |
| {-1}, |
| }; |
| |
| static struct module_pin_mux cbmux_pin_mux[] = { |
| {OFFSET(uart0_ctsn), MODE(7) | RXACTIVE | PULLDOWN_EN}, /* JP3 */ |
| {OFFSET(uart0_rtsn), MODE(7) | RXACTIVE | PULLUP_EN}, /* JP4 */ |
| {-1}, |
| }; |
| |
| #ifdef CONFIG_NAND |
| static struct module_pin_mux nand_pin_mux[] = { |
| {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */ |
| {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */ |
| {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */ |
| {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */ |
| {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */ |
| {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */ |
| {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */ |
| {OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */ |
| {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */ |
| {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */ |
| {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */ |
| {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */ |
| {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */ |
| {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */ |
| {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */ |
| {-1}, |
| }; |
| #endif |
| |
| void enable_uart0_pin_mux(void) |
| { |
| configure_module_pin_mux(uart0_pin_mux); |
| } |
| |
| void enable_i2c0_pin_mux(void) |
| { |
| configure_module_pin_mux(i2c0_pin_mux); |
| } |
| |
| void enable_board_pin_mux(void) |
| { |
| configure_module_pin_mux(rmii1_pin_mux); |
| configure_module_pin_mux(mmc0_pin_mux); |
| configure_module_pin_mux(cbmux_pin_mux); |
| #ifdef CONFIG_NAND |
| configure_module_pin_mux(nand_pin_mux); |
| #endif |
| #ifdef CONFIG_SPI |
| configure_module_pin_mux(spi0_pin_mux); |
| #endif |
| } |