| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2016 |
| * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc |
| * |
| * (C) Copyright 2017, 2018 |
| * Mario Six, Guntermann & Drunck GmbH, mario.six@gdsys.cc |
| */ |
| |
| #include <common.h> |
| #include <axi.h> |
| #include <dm.h> |
| #include <regmap.h> |
| |
| /** |
| * struct ihs_axi_regs - Structure for the register map of a IHS AXI device |
| * @interrupt_status: Status register to indicate certain events (e.g. |
| * error during transfer, transfer complete, etc.) |
| * @interrupt_enable_control: Register to both control which statuses will be |
| * indicated in the interrupt_status register, and |
| * to change bus settings |
| * @address_lsb: Least significant 16-bit word of the address of a |
| * device to transfer data from/to |
| * @address_msb: Most significant 16-bit word of the address of a |
| * device to transfer data from/to |
| * @write_data_lsb: Least significant 16-bit word of the data to be |
| * written to a device |
| * @write_data_msb: Most significant 16-bit word of the data to be |
| * written to a device |
| * @read_data_lsb: Least significant 16-bit word of the data read |
| * from a device |
| * @read_data_msb: Most significant 16-bit word of the data read |
| * from a device |
| */ |
| struct ihs_axi_regs { |
| u16 interrupt_status; |
| u16 interrupt_enable_control; |
| u16 address_lsb; |
| u16 address_msb; |
| u16 write_data_lsb; |
| u16 write_data_msb; |
| u16 read_data_lsb; |
| u16 read_data_msb; |
| }; |
| |
| /** |
| * ihs_axi_set() - Convenience macro to set values in register map |
| * @map: The register map to write to |
| * @member: The member of the ihs_axi_regs structure to write |
| * @val: The value to write to the register map |
| */ |
| #define ihs_axi_set(map, member, val) \ |
| regmap_set(map, struct ihs_axi_regs, member, val) |
| |
| /** |
| * ihs_axi_get() - Convenience macro to read values from register map |
| * @map: The register map to read from |
| * @member: The member of the ihs_axi_regs structure to read |
| * @valp: Pointer to a buffer to receive the value read |
| */ |
| #define ihs_axi_get(map, member, valp) \ |
| regmap_get(map, struct ihs_axi_regs, member, valp) |
| |
| /** |
| * struct ihs_axi_priv - Private data structure of IHS AXI devices |
| * @map: Register map for the IHS AXI device |
| */ |
| struct ihs_axi_priv { |
| struct regmap *map; |
| }; |
| |
| /** |
| * enum status_reg - Description of bits in the interrupt_status register |
| * @STATUS_READ_COMPLETE_EVENT: A read transfer was completed |
| * @STATUS_WRITE_COMPLETE_EVENT: A write transfer was completed |
| * @STATUS_TIMEOUT_EVENT: A timeout has occurred during the transfer |
| * @STATUS_ERROR_EVENT: A error has occurred during the transfer |
| * @STATUS_AXI_INT: A AXI interrupt has occurred |
| * @STATUS_READ_DATA_AVAILABLE: Data is available to be read |
| * @STATUS_BUSY: The bus is busy |
| * @STATUS_INIT_DONE: The bus has finished initializing |
| */ |
| enum status_reg { |
| STATUS_READ_COMPLETE_EVENT = BIT(15), |
| STATUS_WRITE_COMPLETE_EVENT = BIT(14), |
| STATUS_TIMEOUT_EVENT = BIT(13), |
| STATUS_ERROR_EVENT = BIT(12), |
| STATUS_AXI_INT = BIT(11), |
| STATUS_READ_DATA_AVAILABLE = BIT(7), |
| STATUS_BUSY = BIT(6), |
| STATUS_INIT_DONE = BIT(5), |
| }; |
| |
| /** |
| * enum control_reg - Description of bit fields in the interrupt_enable_control |
| * register |
| * @CONTROL_READ_COMPLETE_EVENT_ENABLE: STATUS_READ_COMPLETE_EVENT will be |
| * raised in the interrupt_status register |
| * @CONTROL_WRITE_COMPLETE_EVENT_ENABLE: STATUS_WRITE_COMPLETE_EVENT will be |
| * raised in the interrupt_status register |
| * @CONTROL_TIMEOUT_EVENT_ENABLE: STATUS_TIMEOUT_EVENT will be raised in |
| * the interrupt_status register |
| * @CONTROL_ERROR_EVENT_ENABLE: STATUS_ERROR_EVENT will be raised in |
| * the interrupt_status register |
| * @CONTROL_AXI_INT_ENABLE: STATUS_AXI_INT will be raised in the |
| * interrupt_status register |
| * @CONTROL_CMD_NOP: Configure bus to send a NOP command |
| * for the next transfer |
| * @CONTROL_CMD_WRITE: Configure bus to do a write transfer |
| * @CONTROL_CMD_WRITE_POST_INC: Auto-increment address after write |
| * transfer |
| * @CONTROL_CMD_READ: Configure bus to do a read transfer |
| * @CONTROL_CMD_READ_POST_INC: Auto-increment address after read |
| * transfer |
| */ |
| enum control_reg { |
| CONTROL_READ_COMPLETE_EVENT_ENABLE = BIT(15), |
| CONTROL_WRITE_COMPLETE_EVENT_ENABLE = BIT(14), |
| CONTROL_TIMEOUT_EVENT_ENABLE = BIT(13), |
| CONTROL_ERROR_EVENT_ENABLE = BIT(12), |
| CONTROL_AXI_INT_ENABLE = BIT(11), |
| |
| CONTROL_CMD_NOP = 0x0, |
| CONTROL_CMD_WRITE = 0x8, |
| CONTROL_CMD_WRITE_POST_INC = 0x9, |
| CONTROL_CMD_READ = 0xa, |
| CONTROL_CMD_READ_POST_INC = 0xb, |
| }; |
| |
| /** |
| * enum axi_cmd - Determine if transfer is read or write transfer |
| * @AXI_CMD_READ: The transfer should be a read transfer |
| * @AXI_CMD_WRITE: The transfer should be a write transfer |
| */ |
| enum axi_cmd { |
| AXI_CMD_READ, |
| AXI_CMD_WRITE, |
| }; |
| |
| /** |
| * ihs_axi_transfer() - Run transfer on the AXI bus |
| * @bus: The AXI bus device on which to run the transfer on |
| * @address: The address to use in the transfer (i.e. which address to |
| * read/write from/to) |
| * @cmd: Should the transfer be a read or write transfer? |
| * |
| * Return: 0 if OK, -ve on error |
| */ |
| static int ihs_axi_transfer(struct udevice *bus, ulong address, |
| enum axi_cmd cmd) |
| { |
| struct ihs_axi_priv *priv = dev_get_priv(bus); |
| /* Try waiting for events up to 10 times */ |
| const uint WAIT_TRIES = 10; |
| u16 wait_mask = STATUS_TIMEOUT_EVENT | |
| STATUS_ERROR_EVENT; |
| u16 complete_flag; |
| u16 status; |
| uint k; |
| |
| if (cmd == AXI_CMD_READ) { |
| complete_flag = STATUS_READ_COMPLETE_EVENT; |
| cmd = CONTROL_CMD_READ; |
| } else { |
| complete_flag = STATUS_WRITE_COMPLETE_EVENT; |
| cmd = CONTROL_CMD_WRITE; |
| } |
| |
| wait_mask |= complete_flag; |
| |
| /* Lower 16 bit */ |
| ihs_axi_set(priv->map, address_lsb, address & 0xffff); |
| /* Upper 16 bit */ |
| ihs_axi_set(priv->map, address_msb, (address >> 16) & 0xffff); |
| |
| ihs_axi_set(priv->map, interrupt_status, wait_mask); |
| ihs_axi_set(priv->map, interrupt_enable_control, cmd); |
| |
| for (k = WAIT_TRIES; k > 0; --k) { |
| ihs_axi_get(priv->map, interrupt_status, &status); |
| if (status & wait_mask) |
| break; |
| udelay(1); |
| } |
| |
| /* |
| * k == 0 -> Tries ran out with no event we were waiting for actually |
| * occurring. |
| */ |
| if (!k) |
| ihs_axi_get(priv->map, interrupt_status, &status); |
| |
| if (status & complete_flag) |
| return 0; |
| |
| if (status & STATUS_ERROR_EVENT) { |
| debug("%s: Error occurred during transfer\n", bus->name); |
| return -EIO; |
| } |
| |
| debug("%s: Transfer timed out\n", bus->name); |
| return -ETIMEDOUT; |
| } |
| |
| /* |
| * API |
| */ |
| |
| static int ihs_axi_read(struct udevice *dev, ulong address, void *data, |
| enum axi_size_t size) |
| { |
| struct ihs_axi_priv *priv = dev_get_priv(dev); |
| int ret; |
| u16 data_lsb, data_msb; |
| u32 *p = data; |
| |
| if (size != AXI_SIZE_32) { |
| debug("%s: transfer size '%d' not supported\n", |
| dev->name, size); |
| return -ENOSYS; |
| } |
| |
| ret = ihs_axi_transfer(dev, address, AXI_CMD_READ); |
| if (ret < 0) { |
| debug("%s: Error during AXI transfer (err = %d)\n", |
| dev->name, ret); |
| return ret; |
| } |
| |
| ihs_axi_get(priv->map, read_data_lsb, &data_lsb); |
| ihs_axi_get(priv->map, read_data_msb, &data_msb); |
| |
| /* Assemble data from two 16-bit words */ |
| *p = (data_msb << 16) | data_lsb; |
| |
| return 0; |
| } |
| |
| static int ihs_axi_write(struct udevice *dev, ulong address, void *data, |
| enum axi_size_t size) |
| { |
| struct ihs_axi_priv *priv = dev_get_priv(dev); |
| int ret; |
| u32 *p = data; |
| |
| if (size != AXI_SIZE_32) { |
| debug("%s: transfer size '%d' not supported\n", |
| dev->name, size); |
| return -ENOSYS; |
| } |
| |
| /* Lower 16 bit */ |
| ihs_axi_set(priv->map, write_data_lsb, *p & 0xffff); |
| /* Upper 16 bit */ |
| ihs_axi_set(priv->map, write_data_msb, (*p >> 16) & 0xffff); |
| |
| ret = ihs_axi_transfer(dev, address, AXI_CMD_WRITE); |
| if (ret < 0) { |
| debug("%s: Error during AXI transfer (err = %d)\n", |
| dev->name, ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static const struct udevice_id ihs_axi_ids[] = { |
| { .compatible = "gdsys,ihs_axi" }, |
| { /* sentinel */ } |
| }; |
| |
| static const struct axi_ops ihs_axi_ops = { |
| .read = ihs_axi_read, |
| .write = ihs_axi_write, |
| }; |
| |
| static int ihs_axi_probe(struct udevice *dev) |
| { |
| struct ihs_axi_priv *priv = dev_get_priv(dev); |
| |
| regmap_init_mem(dev_ofnode(dev), &priv->map); |
| |
| return 0; |
| } |
| |
| U_BOOT_DRIVER(ihs_axi_bus) = { |
| .name = "ihs_axi_bus", |
| .id = UCLASS_AXI, |
| .of_match = ihs_axi_ids, |
| .ops = &ihs_axi_ops, |
| .priv_auto_alloc_size = sizeof(struct ihs_axi_priv), |
| .probe = ihs_axi_probe, |
| }; |