| /* |
| * Google Veyron Minnie Rev 0+ board device tree source |
| * |
| * Copyright 2015 Google, Inc |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This file is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| /dts-v1/; |
| #include "rk3288-veyron-chromebook.dtsi" |
| |
| / { |
| model = "Google Minnie"; |
| compatible = "google,veyron-minnie-rev4", "google,veyron-minnie-rev3", |
| "google,veyron-minnie-rev2", "google,veyron-minnie-rev1", |
| "google,veyron-minnie-rev0", "google,veyron-minnie", |
| "google,veyron", "rockchip,rk3288"; |
| |
| backlight_regulator: backlight-regulator { |
| compatible = "regulator-fixed"; |
| enable-active-high; |
| gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&bl_pwr_en>; |
| regulator-name = "backlight_regulator"; |
| vin-supply = <&vcc33_sys>; |
| startup-delay-us = <15000>; |
| }; |
| |
| panel_regulator: panel-regulator { |
| compatible = "regulator-fixed"; |
| enable-active-high; |
| gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&lcd_enable_h>; |
| regulator-name = "panel_regulator"; |
| startup-delay-us = <100000>; |
| vin-supply = <&vcc33_sys>; |
| }; |
| |
| vcc18_lcd: vcc18-lcd { |
| compatible = "regulator-fixed"; |
| enable-active-high; |
| gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&avdd_1v8_disp_en>; |
| regulator-name = "vcc18_lcd"; |
| regulator-always-on; |
| regulator-boot-on; |
| vin-supply = <&vcc18_wl>; |
| }; |
| |
| sound { |
| compatible = "rockchip,audio-max98090-jerry"; |
| |
| cpu { |
| sound-dai = <&i2s 0>; |
| }; |
| |
| codec { |
| sound-dai = <&max98090 0>; |
| }; |
| }; |
| }; |
| |
| &backlight { |
| /* Minnie panel PWM must be >= 1%, so start non-zero brightness at 3 */ |
| brightness-levels = < |
| 0 3 4 5 6 7 |
| 8 9 10 11 12 13 14 15 |
| 16 17 18 19 20 21 22 23 |
| 24 25 26 27 28 29 30 31 |
| 32 33 34 35 36 37 38 39 |
| 40 41 42 43 44 45 46 47 |
| 48 49 50 51 52 53 54 55 |
| 56 57 58 59 60 61 62 63 |
| 64 65 66 67 68 69 70 71 |
| 72 73 74 75 76 77 78 79 |
| 80 81 82 83 84 85 86 87 |
| 88 89 90 91 92 93 94 95 |
| 96 97 98 99 100 101 102 103 |
| 104 105 106 107 108 109 110 111 |
| 112 113 114 115 116 117 118 119 |
| 120 121 122 123 124 125 126 127 |
| 128 129 130 131 132 133 134 135 |
| 136 137 138 139 140 141 142 143 |
| 144 145 146 147 148 149 150 151 |
| 152 153 154 155 156 157 158 159 |
| 160 161 162 163 164 165 166 167 |
| 168 169 170 171 172 173 174 175 |
| 176 177 178 179 180 181 182 183 |
| 184 185 186 187 188 189 190 191 |
| 192 193 194 195 196 197 198 199 |
| 200 201 202 203 204 205 206 207 |
| 208 209 210 211 212 213 214 215 |
| 216 217 218 219 220 221 222 223 |
| 224 225 226 227 228 229 230 231 |
| 232 233 234 235 236 237 238 239 |
| 240 241 242 243 244 245 246 247 |
| 248 249 250 251 252 253 254 255>; |
| power-supply = <&backlight_regulator>; |
| }; |
| |
| &dmc { |
| rockchip,pctl-timing = <0x215 0xc8 0x0 0x35 0x26 0x2 0x70 0x2000d |
| 0x6 0x0 0x8 0x4 0x17 0x24 0xd 0x6 |
| 0x4 0x8 0x4 0x76 0x4 0x0 0x30 0x0 |
| 0x1 0x2 0x2 0x4 0x0 0x0 0xc0 0x4 |
| 0x8 0x1f4>; |
| rockchip,phy-timing = <0x48d7dd93 0x187008d8 0x121076 |
| 0x0 0xc3 0x6 0x1>; |
| rockchip,sdram-params = <0x20d266a4 0x5b6 6 533000000 6 13 0>; |
| }; |
| |
| &emmc { |
| /delete-property/mmc-hs200-1_8v; |
| }; |
| |
| &gpio_keys { |
| pinctrl-0 = <&pwr_key_h &ap_lid_int_l &volum_down_l &volum_up_l>; |
| |
| volum_down { |
| label = "Volum_down"; |
| gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_VOLUMEDOWN>; |
| debounce-interval = <100>; |
| }; |
| |
| volum_up { |
| label = "Volum_up"; |
| gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_VOLUMEUP>; |
| debounce-interval = <100>; |
| }; |
| }; |
| |
| &i2c_tunnel { |
| battery: bq27500@55 { |
| compatible = "ti,bq27500"; |
| reg = <0x55>; |
| }; |
| }; |
| |
| &i2c3 { |
| status = "okay"; |
| |
| clock-frequency = <400000>; |
| i2c-scl-falling-time-ns = <50>; |
| i2c-scl-rising-time-ns = <300>; |
| |
| touchscreen@10 { |
| compatible = "elan,ekth3500"; |
| reg = <0x10>; |
| interrupt-parent = <&gpio2>; |
| interrupts = <14 IRQ_TYPE_EDGE_FALLING>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&touch_int &touch_rst>; |
| reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; |
| vcc33-supply = <&vcc33_touch>; |
| vccio-supply = <&vcc33_touch>; |
| }; |
| }; |
| |
| &panel { |
| compatible = "auo,b101ean01", "simple-panel"; |
| power-supply= <&panel_regulator>; |
| }; |
| |
| &rk808 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; |
| |
| regulators { |
| vcc33_touch: LDO_REG2 { |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-name = "vcc33_touch"; |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| }; |
| }; |
| |
| vcc5v_touch: SWITCH_REG2 { |
| regulator-name = "vcc5v_touch"; |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| }; |
| }; |
| }; |
| }; |
| |
| &sdmmc { |
| disable-wp; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio |
| &sdmmc_bus4>; |
| }; |
| |
| &vcc_5v { |
| enable-active-high; |
| gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&drv_5v>; |
| }; |
| |
| &vcc50_hdmi { |
| enable-active-high; |
| gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&vcc50_hdmi_en>; |
| }; |
| |
| &pinctrl { |
| backlight { |
| bl_pwr_en: bl_pwr_en { |
| rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>; |
| }; |
| }; |
| |
| buck-5v { |
| drv_5v: drv-5v { |
| rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>; |
| }; |
| }; |
| |
| buttons { |
| volum_down_l: volum-down-l { |
| rockchip,pins = <5 11 RK_FUNC_GPIO &pcfg_pull_up>; |
| }; |
| |
| volum_up_l: volum-up-l { |
| rockchip,pins = <5 10 RK_FUNC_GPIO &pcfg_pull_up>; |
| }; |
| }; |
| |
| hdmi { |
| vcc50_hdmi_en: vcc50-hdmi-en { |
| rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>; |
| }; |
| }; |
| |
| lcd { |
| lcd_enable_h: lcd-en { |
| rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>; |
| }; |
| |
| avdd_1v8_disp_en: avdd-1v8-disp-en { |
| rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>; |
| }; |
| }; |
| |
| pmic { |
| dvs_1: dvs-1 { |
| rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>; |
| }; |
| |
| dvs_2: dvs-2 { |
| rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>; |
| }; |
| }; |
| |
| prochot { |
| gpio_prochot: gpio-prochot { |
| rockchip,pins = <2 8 RK_FUNC_GPIO &pcfg_pull_none>; |
| }; |
| }; |
| |
| touchscreen { |
| touch_int: touch-int { |
| rockchip,pins = <2 14 RK_FUNC_GPIO &pcfg_pull_none>; |
| }; |
| |
| touch_rst: touch-rst { |
| rockchip,pins = <2 15 RK_FUNC_GPIO &pcfg_pull_none>; |
| }; |
| }; |
| }; |
