| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Device Tree file for the GARDENA smart Gateway (AT91SAM) |
| * |
| * Copyright (C) 2012 Atmel, |
| * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> |
| */ |
| |
| /dts-v1/; |
| |
| #include "at91sam9g25.dtsi" |
| |
| / { |
| model = "GARDENA smart Gateway (AT91SAM)"; |
| compatible = "gardena,smart-gateway-at91sam", "atmel,at91sam9"; |
| |
| aliases { |
| serial0 = &dbgu; |
| }; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| memory { |
| reg = <0x20000000 0x8000000>; |
| }; |
| |
| clocks { |
| slow_xtal { |
| clock-frequency = <32768>; |
| }; |
| |
| main_xtal { |
| clock-frequency = <12000000>; |
| }; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| power_blue { |
| label = "smartgw:power:blue"; |
| gpios = <&pioC 21 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| power_green { |
| label = "smartgw:power:green"; |
| gpios = <&pioC 20 GPIO_ACTIVE_HIGH>; |
| default-state = "on"; |
| }; |
| |
| power_red { |
| label = "smartgw:power:red"; |
| gpios = <&pioC 19 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| radio_blue { |
| label = "smartgw:radio:blue"; |
| gpios = <&pioC 18 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| radio_green { |
| label = "smartgw:radio:green"; |
| gpios = <&pioC 17 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| radio_red { |
| label = "smartgw:radio:red"; |
| gpios = <&pioC 16 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| internet_blue { |
| label = "smartgw:internet:blue"; |
| gpios = <&pioC 15 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| internet_green { |
| label = "smartgw:internet:green"; |
| gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| internet_red { |
| label = "smartgw:internet:red"; |
| gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| }; |
| }; |
| |
| &dbgu { |
| status = "okay"; |
| }; |
| |
| &macb0 { |
| phy-mode = "rmii"; |
| status = "okay"; |
| }; |
| |
| &nand0 { |
| nand-bus-width = <8>; |
| nand-ecc-mode = "hw"; |
| atmel,has-pmecc; /* Enable PMECC */ |
| atmel,pmecc-cap = <2>; |
| atmel,pmecc-sector-size = <512>; |
| nand-on-flash-bbt; |
| status = "okay"; |
| }; |
| |
| &watchdog { |
| status = "okay"; |
| timeout-sec = <16>; |
| }; |