| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2019 Rockchip Electronics Co., Ltd |
| */ |
| |
| #include <common.h> |
| #include <debug_uart.h> |
| #include <dm.h> |
| #include <ram.h> |
| #include <spl.h> |
| #include <asm/arch-rockchip/bootrom.h> |
| #include <asm/arch-rockchip/sdram.h> |
| #include <asm/io.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| void board_return_to_bootrom(void) |
| { |
| back_to_bootrom(BROM_BOOT_NEXTSTAGE); |
| } |
| |
| __weak const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { |
| }; |
| |
| const char *board_spl_was_booted_from(void) |
| { |
| u32 bootdevice_brom_id = readl(BROM_BOOTSOURCE_ID_ADDR); |
| const char *bootdevice_ofpath = NULL; |
| |
| if (bootdevice_brom_id < ARRAY_SIZE(boot_devices)) |
| bootdevice_ofpath = boot_devices[bootdevice_brom_id]; |
| |
| if (bootdevice_ofpath) |
| debug("%s: brom_bootdevice_id %x maps to '%s'\n", |
| __func__, bootdevice_brom_id, bootdevice_ofpath); |
| else |
| debug("%s: failed to resolve brom_bootdevice_id %x\n", |
| __func__, bootdevice_brom_id); |
| |
| return bootdevice_ofpath; |
| } |
| |
| u32 spl_boot_device(void) |
| { |
| u32 boot_device = BOOT_DEVICE_MMC1; |
| |
| #if defined(CONFIG_TARGET_CHROMEBOOK_JERRY) || \ |
| defined(CONFIG_TARGET_CHROMEBIT_MICKEY) || \ |
| defined(CONFIG_TARGET_CHROMEBOOK_MINNIE) |
| return BOOT_DEVICE_SPI; |
| #endif |
| if (CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM)) |
| return BOOT_DEVICE_BOOTROM; |
| |
| return boot_device; |
| } |
| |
| u32 spl_boot_mode(const u32 boot_device) |
| { |
| return MMCSD_MODE_RAW; |
| } |
| |
| #if !defined(CONFIG_ROCKCHIP_RK3188) |
| #define TIMER_LOAD_COUNT_L 0x00 |
| #define TIMER_LOAD_COUNT_H 0x04 |
| #define TIMER_CONTROL_REG 0x10 |
| #define TIMER_EN 0x1 |
| #define TIMER_FMODE BIT(0) |
| #define TIMER_RMODE BIT(1) |
| |
| __weak void rockchip_stimer_init(void) |
| { |
| /* If Timer already enabled, don't re-init it */ |
| u32 reg = readl(CONFIG_ROCKCHIP_STIMER_BASE + TIMER_CONTROL_REG); |
| |
| if (reg & TIMER_EN) |
| return; |
| #ifndef CONFIG_ARM64 |
| asm volatile("mcr p15, 0, %0, c14, c0, 0" |
| : : "r"(COUNTER_FREQUENCY)); |
| #endif |
| writel(0, CONFIG_ROCKCHIP_STIMER_BASE + TIMER_CONTROL_REG); |
| writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE); |
| writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE + 4); |
| writel(TIMER_EN | TIMER_FMODE, CONFIG_ROCKCHIP_STIMER_BASE + |
| TIMER_CONTROL_REG); |
| } |
| #endif |
| |
| __weak int board_early_init_f(void) |
| { |
| return 0; |
| } |
| |
| __weak int arch_cpu_init(void) |
| { |
| return 0; |
| } |
| |
| void board_init_f(ulong dummy) |
| { |
| int ret; |
| #if !defined(CONFIG_SUPPORT_TPL) || defined(CONFIG_SPL_OS_BOOT) |
| struct udevice *dev; |
| #endif |
| |
| #ifdef CONFIG_DEBUG_UART |
| /* |
| * Debug UART can be used from here if required: |
| * |
| * debug_uart_init(); |
| * printch('a'); |
| * printhex8(0x1234); |
| * printascii("string"); |
| */ |
| debug_uart_init(); |
| debug("\nspl:debug uart enabled in %s\n", __func__); |
| #endif |
| |
| board_early_init_f(); |
| |
| ret = spl_early_init(); |
| if (ret) { |
| printf("spl_early_init() failed: %d\n", ret); |
| hang(); |
| } |
| arch_cpu_init(); |
| #if !defined(CONFIG_SUPPORT_TPL) || defined(CONFIG_SPL_OS_BOOT) |
| debug("\nspl:init dram\n"); |
| ret = uclass_get_device(UCLASS_RAM, 0, &dev); |
| if (ret) { |
| printf("DRAM init failed: %d\n", ret); |
| return; |
| } |
| #endif |
| #if !defined(CONFIG_ROCKCHIP_RK3188) |
| rockchip_stimer_init(); |
| #endif |
| #ifdef CONFIG_SYS_ARCH_TIMER |
| /* Init ARM arch timer in arch/arm/cpu/armv7/arch_timer.c */ |
| timer_init(); |
| #endif |
| preloader_console_init(); |
| } |
| |
| #ifdef CONFIG_SPL_LOAD_FIT |
| int board_fit_config_name_match(const char *name) |
| { |
| /* Just empty function now - can't decide what to choose */ |
| debug("%s: %s\n", __func__, name); |
| |
| return 0; |
| } |
| #endif |